Connect with us

Tech

Medtech giant Stryker offline after Iran-linked wiper malware attack

Published

on

Stryker

Update: Story updated with a statement from Stryker confirming they suffered a disruptive cyberattack.

Leading medical technology company Stryker has been hit by a wiper malware attack claimed by Handala, an Iranian-linked and pro-Palestinian hacktivist group.

The medtech giant manufactures a range of products, including surgical and neurotechnology equipment. With over 53,000 employees, Stryker is a Fortune 500 company that reported global sales of $22.6 billion in 2024.

Handala says they stole 50 terabytes of data before wiping tens of thousands of systems and servers across the company’s network, forcing Stryker to shut down in “an unprecedented blow.”

Advertisement

“In this operation, over 200,000 systems, servers, and mobile devices have been wiped and 50 terabytes of critical data have been extracted,” the attackers said. “Stryker’s offices in 79 countries have been forced to shut down.”

Handala's Stryker statement
Handala’s Stryker statement (BleepingComputer)

This aligns with reports from people claiming to be Stryker employees from the United States, Ireland, Costa Rica, and Australia, who said their managed Windows and mobile devices were remotely wiped in the middle of the night. The attackers have also defaced the company’s Entra login page to display a Handala logo.

A Stryker employee told BleepingComputer the incident began early Wednesday morning, when devices enrolled in the company’s mobile device management system were remotely wiped. The employee said colleagues who had personal phones enrolled for work access also lost data after their devices were reset.

Staff were instructed to remove corporate management and applications from their personal devices, including the Intune Company Portal, Teams, and VPN clients.

Numerous employees also report that the attack disrupted access to internal services and applications, forcing some locations to revert to “pen and paper” workflows after systems became unavailable.

Advertisement

As a result of the attack, Stryker is now working to restore their systems amid a global outage, as first reported by The Wall Street Journal.

“We are experiencing a severe, global disruption impacting all Stryker laptops and systems that connect to our network,” Stryker told employees in Cork, Ireland, according to local media.

“At this time, the root cause has not yet been identified. We are actively engaged with Microsoft and treating this a critical, enterprise-wide incident,” the company added in a message sent to employees in Asia.

Handala (also known as Handala Hack Team, Hatef, Hamsa) first surfaced in December 2023 as a hacktivist operation linked to Iran’s Ministry of Intelligence and Security (MOIS) that targets Israeli organizations with destructive malware designed to wipe Windows and Linux devices.

Advertisement

They are also known for stealing sensitive data from victims’ compromised systems and publishing it on the group’s data leak portals.

Stryker confirms cyberattack

After publishing this story, Stryker filed a Form 8-K with the SEC, confirming that it suffered a cyberattack that impacted its entire Microsoft environment.

“On March 11, 2026, Stryker Corporation (‘we’ or the ‘Company’) identified a cybersecurity incident affecting certain information technology systems of the Company that has resulted in a global disruption to the Company’s Microsoft environment,” reads the 8K filing.

“Upon detection, the Company activated its cybersecurity response plan and launched an investigation internally with the support of external advisors and cybersecurity experts to assess and to contain the threat.

Advertisement

“The Company has no indication of ransomware or malware and believes the incident is contained.”

Stryker says the incident will continue to disrupt its work environment, including access to network systems and business applications used in its operations, as it restores systems.

However, the company added that it doesn’t have a timeline for when everything will be restored.

Malware is getting smarter. The Red Report 2026 reveals how new threats use math to detect sandboxes and hide in plain sight.

Download our analysis of 1.1 million malicious samples to uncover the top 10 techniques and see if your security stack is blinded.

Advertisement

Source link

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tech

Selective Ironing Adds Designs To 3D Prints

Published

on

While working on a project that involved super-thin prints, [Julius Curt] came up with selective ironing, a way to put designs on the top surface of a print without adding any height.

For those unfamiliar, ironing is a technique in filament-based 3D printing that uses the extruder to smooth out top surfaces after printing them. The hot nozzle makes additional passes across a top surface, extruding a tiny amount in the process, which smooths out imperfections and leaves a much cleaner surface. Selective ironing is nearly the same process, but applied only in a certain pattern instead of across an entire surface.

Selective Ironing can create patterns by defining the design in CAD, and using a post-processing script.

While conceptually simple, actually making it work was harder than expected. [Julius] settled on using a mixture of computer-aided design (CAD) work to define the pattern, combined with a post-processing script. More specifically, one models the desired pattern into the object in CAD as a one-layer-tall feature. The script then removes that layer from the model while applying the modified ironing pattern in its place. In this way, one can define the pattern in CAD without actually adding any height to the printed object. You can see it in action in the video, embedded below.

We’ve seen some interesting experiments in ironing 3D prints, including non-planar ironing and doing away with the ironing setting altogether by carefully tuning slicer settings so it is not needed. Selective Ironing is another creative angle, and we can imagine it being used to embed a logo or part number as easily as a pattern.

Advertisement

Selective Ironing is still experimental, but if you find yourself intrigued and would like to give it a try head over to the GitHub repository where you’ll find the script as well as examples to try out.

Advertisement

Source link

Continue Reading

Tech

The U.S. Built A Blueprint To Avoid Civilian War Casualties. Trump Officials Scrapped It.

Published

on

from the avoidable-tragedies dept

This story was originally published by ProPublica. Republished under a CC BY-NC-ND 3.0 license.

Images from the missile strike in southern Iran were more horrifying than any of the case studies Air Force combat veteran Wes J. Bryant had pored over in his mission to overhaul how the U.S. military safeguards civilian life.

Parents wept over their children’s bodies. Crushed desks and blood-stained backpacks poked through the rubble. The death toll from the attack on an elementary school in Minab climbed past 165, most of them under age 12, with nearly 100 others wounded, according to Iranian health officials. Photos of small coffins and rows of fresh graves went viral, a devastating emblem of Day 1 in the open-ended U.S.-Israeli war in Iran.

Advertisement

Bryant, a former special operations targeting specialist, said he couldn’t help but think of what-ifs as he monitored fallout from the Feb. 28 attack.

Just over a year ago, he had been a senior adviser in an ambitious new Defense Department program aimed at reducing civilian harm during operations. Finally, Bryant said, the military was getting serious about reforms. He worked out of a newly opened Civilian Protection Center of Excellence, where his supervisor was a veteran strike-team targeter who had served as a United Nations war crimes investigator.

Today, that momentum is gone. Bryant was forced out of government in cuts last spring. The civilian protection mission was dissolved as Defense Secretary Pete Hegseth made “lethality” a top priority. And the world has witnessed a tragedy in Minab that, if U.S. responsibility is confirmed, would be the most civilians killed by the military in a single attack in decades.

Dismantling the fledgling harm-reduction effort, defense analysts say, is among several ways the Trump administration has reorganized national security around two principles: more aggression, less accountability.

Advertisement

Trump and his aides lowered the authorization level for lethal force, broadened target categories, inflated threat assessments and fired inspectors general, according to more than a dozen current and former national security personnel. Nearly all spoke on condition of anonymity for fear of retaliation.

“We’re departing from the rules and norms that we’ve tried to establish as a global community since at least World War II,” Bryant said. “There’s zero accountability.”

Citing open-source intelligence and government officials, several news outlets have concluded that the strike in Minab most likely was carried out by the United States. President Donald Trump, without providing evidence, told reporters March 7 that it was “done by Iran.” Hegseth, standing next to the president aboard Air Force One, said the matter was under investigation.

The next day, the open-source research outfit Bellingcat said it had authenticated a video showing a Tomahawk missile strike next to the school in Minab. Iranian state media later showed fragments of a U.S.-made Tomahawk, as identified by Bellingcat and others, at the site. The United States is the only party to the conflict known to possess Tomahawks. U.N. human rights experts have called for an investigation into whether the attack violated international law.

Advertisement

The Department of Defense and White House did not respond to requests for comment.

Since the post-9/11 invasions of Afghanistan and Iraq, successive U.S. administrations have faced controversies over civilian deaths. Defense officials eager to shed the legacy of the “forever wars” have periodically called for better protections for civilians, but there was no standardized framework until 2022, when Biden-era leaders adopted a strategy rooted in work that had begun under the first Trump presidency.

Formalized in a 2022 action plan and in a Defense Department instruction, the initiatives are known collectively as Civilian Harm Mitigation and Response, a clunky name often shortened to CHMR and pronounced “chimmer.” Around 200 personnel were assigned to the mission, including roughly 30 at the Civilian Protection Center of Excellence, a coordination hub near the Pentagon.

The CHMR strategy calls for more in-depth planning before an attack, such as real-time mapping of the civilian presence in an area and in-depth analysis of the risks. After an operation, reports of harm to noncombatants would prompt an assessment or investigation to figure out what went wrong and then incorporate those lessons into training.

Advertisement

By the time Trump returned to power, harm-mitigation teams were embedded with regional commands and special operations leadership. During Senate confirmation hearings, several Trump nominees for top defense posts voiced support for the mission. Once in office, however, they stood by as the program was gutted, current and former national security officials said.

Around 90% of the CHMR mission is gone, former personnel said, with no more than a single adviser now at most commands. At Central Command, where a 10-person team was cut to one, “a handful” of the eliminated positions were backfilled to help with the Iran campaign. Defense officials can’t formally close the Civilian Protection Center of Excellence without congressional approval, but Bryant and others say it now exists mostly on paper.

“It has no mission or mandate or budget,” Bryant said.

Spike in Strikes

Global conflict monitors have since recorded a dramatic increase in deadly U.S. military operations. Even before the Iran campaign, the number of strikes worldwide since Trump returned to office had surpassed the total from all four years of Joe Biden’s presidency.

Advertisement

Had the Defense Department’s harm-reduction mission continued apace, current and former officials say, the policies almost certainly would’ve reduced the number of noncombatants harmed over the past year.

Beyond the moral considerations, they added, civilian casualties fuel militant recruiting and hinder intelligence-gathering. Retired Gen. Stanley McChrystal, who commanded U.S. and NATO forces in Afghanistan, explains the risk in an equation he calls “insurgent math”: For every innocent killed, at least 10 new enemies are created.

U.S.-Israeli strikes have already killed more than 1,200 civilians in Iran, including nearly 200 children, according to Human Rights Activists News Agency, a U.S.-based group that verifies casualties through a network in Iran. The group says hundreds more deaths are under review, a difficult process given Iran’s internet blackout and dangerous conditions.

Defense analysts say the civilian toll of the Iran campaign, on top of dozens of recent noncombatant casualties in Yemen and Somalia, reopens dark chapters from the “war on terror” that had prompted reforms in the first place.

Advertisement

“It’s a recipe for disaster,” a senior counterterrorism official who left the government a few months ago said of the Trump administration’s yearlong bombing spree. “It’s ‘Groundhog Day’ — every day we’re just killing people and making more enemies.”

In 2015, two dozen patients and 14 staff members were killed when a heavily armed U.S. gunship fired for over an hour on a Doctors Without Borders hospital in northern Afghanistan, a disaster that has become a cautionary tale for military planners.

“Our patients burned in their beds, our medical staff were decapitated or lost limbs. Others were shot from the air while they fled the burning building,” the international aid group said in a report about the destruction of its trauma center in Kunduz.

U.S. military investigation found that multiple human and systems errors had resulted in the strike team mistaking the building for a Taliban target. The Obama administration apologized and offered payouts of $6,000 to families of the dead.

Advertisement

Human rights advocates had hoped the Kunduz debacle would force the U.S. military into taking concrete steps to protect civilians during U.S. combat operations. Within a couple years, however, the issue came roaring back with high civilian casualties in U.S.-led efforts to dislodge Islamic State extremists from strongholds in Syria and Iraq.

In a single week in March 2017, U.S. operations resulted in three incidents of mass civilian casualties: A drone attack on a mosque in Syria killed around 50; a strike in another part of Syria killed 40 in a school filled with displaced families; and bombing in the Iraqi city of Mosul led to a building collapse that killed more than 100 people taking shelter inside.

In heavy U.S. fighting to break Islamic State control over the Syrian city of Raqqa, “military leaders too often lacked a complete picture of conditions on the ground; too often waved off reports of civilian casualties; and too rarely learned any lessons from strikes gone wrong,” according to an analysis by the Pentagon-adjacent Rand Corp. think tank.

“Do It Right Now”

Under pressure from lawmakers, Trump’s then-Defense Secretary James Mattis ordered a review of civilian casualty protocols.

Advertisement

Released in 2019, the review Mattis launched was seen by some advocacy groups as narrow in scope but still a step in the right direction. Yet the issue soon dropped from national discourse, overshadowed by the coronavirus pandemic and landmark racial justice protests.

During the Biden administration’s chaotic withdrawal of U.S. forces from Afghanistan in August 2021, a missile strike in Kabul killed an aid worker and nine of his relatives, including seven children. Then-Defense Secretary Lloyd Austin apologized and said the department would “endeavor to learn from this horrible mistake.”

That incident, along with a New York Times investigative series into deaths from U.S. airstrikes, spurred the adoption of the Civilian Harm Mitigation and Response action plan in 2022. When they established the new Civilian Protection Center of Excellence the next year, defense officials tapped Michael McNerney — the lead author of the blunt RAND report — to be its director.

“The strike against the aid worker and his family in Kabul pushed Austin to say, ‘Do it right now,’” Bryant said.

Advertisement

The first harm-mitigation teams were assigned to leaders in charge of some of the military’s most sensitive counterterrorism and intelligence-gathering operations: Central Command at MacDill Air Force Base in Tampa, Florida; the Joint Special Operations Command at Fort Bragg, North Carolina; and Africa Command in Stuttgart, Germany.

A former CHMR adviser who joined in 2024 after a career in international conflict work said he was reassured to find a serious campaign with a $7 million budget and deep expertise. The adviser spoke on condition of anonymity for fear of retaliation.

Only a few years before, he recalled, he’d had to plead with the Pentagon to pay attention. “It was like a back-of-the-envelope thing — the cost of a Hellfire missile and the cost of hiring people to work on this.”

Bryant became the de facto liaison between the harm-mitigation team and special operations commanders. In December, he described the experience in detail in a private briefing for aides of Sen. Chris Van Hollen, D-Md., who had sought information on civilian casualty protocols involving boat strikes in the Caribbean Sea.

Advertisement

Bryant’s notes from the briefing, reviewed by ProPublica, describe an embrace of the CHMR mission by Adm. Frank Bradley, who at the time was head of the Joint Special Operations Command. In October, Bradley was promoted to lead Special Operations Command.

At the end of 2024 and into early 2025, Bryant worked closely with the commander’s staff. The notes describe Bradley as “incredibly supportive” of the three-person CHMR team embedded in his command.

Bradley, Bryant wrote, directed “comprehensive lookbacks” on civilian casualties in errant strikes and used the findings to mandate changes. He also introduced training on how to integrate harm prevention and international law into operations against high-value targets. “We viewed Bradley as a model,” Bryant said.

Still, the military remained slow to offer compensation to victims and some of the new policies were difficult to independently monitor, according to a report by the Stimson Center, a foreign policy think tank. The CHMR program also faced opposition from critics who say civilian protections are already baked into laws of war and targeting protocols; the argument is that extra oversight “could have a chilling effect” on commanders’ abilities to quickly tailor operations.

Advertisement

To keep reforms on track, Bryant said, CHMR advisers would have to break through a culture of denial among leaders who pride themselves on precision and moral authority.

“The initial gut response of all commands,” Bryant said, “is: ‘No, we didn’t kill civilians.’”

Reforms Unraveled

As the Trump administration returned to the White House pledging deep cuts across the federal government, military and political leaders scrambled to preserve the Civilian Harm Mitigation and Response framework.

At first, CHMR advisers were heartened by Senate confirmation hearings where Trump’s nominees for senior defense posts affirmed support for civilian protections.

Advertisement

Gen. Dan Caine, chairman of the Joint Chiefs of Staff, wrote during his confirmation that commanders “see positive impacts from the program.” Elbridge Colby, undersecretary of defense for policy, wrote that it’s in the national interest to “seek to reduce civilian harm to the degree possible.”

When questioned about cuts to the CHMR mission at a hearing last summer, U.S. Navy Vice Adm. Brad Cooper, head of Central Command, said he was committed to integrating the ideas as “part of our culture.”

Despite the top-level support, current and former officials say, the CHMR mission didn’t stand a chance under Hegseth’s signature lethality doctrine.

The former Fox News personality, who served as an Army National Guard infantry officer in Iraq and Afghanistan, disdains rules of engagement and other guardrails as constraining to the “warrior ethos.” He has defended U.S. troops accused of war crimes, including a Navy SEAL charged with stabbing an imprisoned teenage militant to death and then posing for a photo with the corpse.

Advertisement

A month after taking charge, Hegseth fired the military’s top judge advocate generals, known as JAGs, who provide guidance to keep operations in line with U.S. or international law. Hegseth has described the attorneys as “roadblocks” and used the term “jagoff.”

At the Civilian Protection Center of Excellence, the staff tried in vain to save the program. At one point, Bryant said, he even floated the idea of renaming it the “Center for Precision Warfare” to put the mission in terms Hegseth wouldn’t consider “woke.”

By late February 2025, the CHMR mission was imploding, say current and former defense personnel.

Shortly before his job was eliminated, Bryant openly spoke out against the cuts in The Washington Post and Boston Globe, which he said landed him in deep trouble at the Pentagon. He was placed on leave in March, his security clearance at risk of revocation.

Advertisement

Bryant formally resigned in September and has since become a vocal critic of the administration’s defense policies. In columns and on TV, he warns that Hegseth’s cavalier attitude toward the rule of law and civilian protections is corroding military professionalism.

Bryant said it was hard to watch Bradley, the special operations commander and enthusiastic adopter of CHMR, defending a controversial “double-tap” on an alleged drug boat in which survivors of a first strike were killed in a follow-up hit. Legal experts have said such strikes could violate laws of warfare. Bradley did not respond to a request for comment.

“Everything else starts slipping when you have this culture of higher tolerance for civilian casualties,” Bryant said.

Concerns were renewed in early 2025 with the Trump administration’s revived counterterrorism campaign against Islamist militants regrouping in parts of Africa and the Middle East.

Advertisement

Last April, a U.S. air strike hit a migrant detention center in northwestern Yemen, killing at least 61 African migrants and injuring dozens of others in what Amnesty International says “qualifies as an indiscriminate attack and should be investigated as a war crime.”

Operations in Somalia also have become more lethal. In 2024, Biden’s last year in office, conflict monitors recorded 21 strikes in Somalia, with a combined death toll of 189. In year one of Trump’s second term, the U.S. carried out at least 125 strikes, with reported fatalities as high as 359, according to the New America think tank, which monitors counterterrorism operations.

“It is a strategy focused primarily on killing people,” said Alexander Palmer, a terrorism researcher at the Washington-based Center for Strategic and International Studies.

Last September, the U.S. military announced an attack in northeastern Somalia targeting a weapons dealer for the Islamist militia Al-Shabaab, a U.S.-designated terrorist group. On the ground, however, villagers said the missile strike incinerated Omar Abdullahi, a respected elder nicknamed “Omar Peacemaker” for his role as a clan mediator.

Advertisement

After the death, the U.S. military released no details, citing operational security.

“The U.S. killed an innocent man without proof or remorse,” Abdullahi’s brother, Ali, told Somali news outlets. “He preached peace, not war. Now his blood stains our soil.”

In Iran, former personnel say, the CHMR mission could have made a difference.

Under the scrapped harm-prevention framework, they said, plans for civilian protection would’ve begun months ago, when orders to draw up a potential Iran campaign likely came down from the White House and Pentagon.

Advertisement

CHMR personnel across commands would immediately begin a detailed mapping of what planners call “the civilian environment,” in this case a picture of the infrastructure and movements of ordinary Iranians. They would also check and update the “no-strike list,” which names civilian targets such as schools and hospitals that are strictly off-limits.

One key question is whether the school was on the no-strike list. It sits a few yards from a naval base for the Iranian Revolutionary Guard. The building was formerly part of the base, though it has been marked on maps as a school since at least 2013, according to visual forensics investigations.

“Whoever ‘hits the button’ on a Tomahawk — they’re part of a system,” the former adviser said. “What you want is for that person to feel really confident that when they hit that button, they’re not going to hit schoolchildren.”

If the guardrails failed and the Defense Department faced a disaster like the school strike, Bryant said, CHMR advisers would’ve jumped in to help with transparent public statements and an immediate inquiry.

Advertisement

Instead, he called the Trump administration’s response to the attack “shameful.”

“It’s back to where we were years ago,” Bryant said. If confirmed, “this will go down as one of the most egregious failures in targeting and civilian harm-mitigation in modern U.S. history.”

Filed Under: civilian casualties, civilian protection, dod, donald trump, iran, pete hegseth, trump administration, war crimes, wes bryant

Advertisement

Source link

Continue Reading

Tech

EFF To Court: Don’t Make Embedding Illegal

Published

on

from the the-server-test-is-important dept

Who should be directly liable for online infringement – the entity that serves it up or a user who embeds a link to it? For almost two decades, most U.S. courts have held that the former is responsible, applying a rule called the server test. Under the server test, whomever controls the server that hosts a copyrighted work—and therefore determines who has access to what and how—can be directly liable if that content turns out to be infringing. Anyone else who merely links to it can be secondarily liable in some circumstances (for example, if that third party promotes the infringement), but isn’t on the hook under most circumstances.

The test just makes sense. In the analog world, a person is free to tell others where they may view a third party’s display of a copyrighted work, without being directly liable for infringement if that display turns out to be unlawful. The server test is the straightforward application of the same principle in the online context. A user that links to a picture, video, or article isn’t in charge of transmitting that content to the world, nor are they in a good position to know whether that content violates copyright. In fact, the user doesn’t even control what’s located on the other end of the link—the person that controls the server can change what’s on it at any time, such as swapping in different images, re-editing a video or rewriting an article.

But a news publisher, Emmerich Newspapers, wants the Fifth Circuit to reject the server test, arguing that the entity that embeds links to the content is responsible for “displaying” it and, therefore, can be directly liable if the content turns out to be infringing. If they are right, the common act of embedding is a legally fraught activity and a trap for the unwary.

The Court should decline, or risk destabilizing fundamental, and useful, online activities. As we explain in an amicus brief filed with several public interest and trade organizations, linking and embedding are not unusual, nefarious, or misleading practices. Rather, the ability to embed external content and code is a crucial design feature of internet architecture, responsible for many of the internet’s most useful functions. Millions of websites—including EFF’s—embed external content or code for everything from selecting fonts and streaming music to providing services like customer support and legal compliance. The server test provides legal certainty for internet users by assigning primary responsibility to the person with the best ability to prevent infringement. Emmerich’s approach, by contrast, invites legal chaos.

Advertisement

Emmerich also claims that altering a URL violates the Digital Millennium Copyright Act’s prohibition on changing or deleting copyright management information. If they are correct, using a link shortener could put users at risks of statutory penalties—an outcome Congress surely did not intend.

Both of these theories would make common internet activities legally risky and undermine copyright’s Constitutional purpose: to promote the creation of and access to knowledge. The district court recognized as much and we hope the appeals court agrees.

Reposted from the EFF’s Deeplinks blog.

Filed Under: 5th circuit, copyright, embedding, intermediary liability, liability, linking, server test

Companies: emmerich newspapers

Advertisement

Source link

Continue Reading

Tech

Google Play adds free game trials and a dedicated PC hub for gamers

Published

on

In 2022, Google first announced its Google Play Games on PC project, which allows Android users to play their favorite games on Windows PC. Since then, Google has released several updates to improve its service, with Google Play Games for PC officially exiting beta on September 23, 2025. 

It’s one of the few Google projects that hasn’t been left to wither away, and now, Google Play is rolling out a handful of useful changes that could genuinely improve how you discover, buy, and play games, whether you’re on your phone or PC.

The timing seems intentional. Google made these announcements at GDC (Game Developers Conference), where Microsoft also announced Xbox mode, which allows players to get a console-like gaming experience on Windows 11 devices.

This year’s focus appears to be on improving the cross-device and cross-platform gaming experience.

Advertisement

Can we finally try games before paying for them?

My favorite part of the new announcements has to be how you pay for games. If you’ve ever felt burned by buying a game on your phone and then having to buy it again on PC, Google has got you covered. A new “Buy once, play anywhere” pricing model means that a single purchase on Google Play gives you access to both the mobile and PC versions.

For those still on the fence about buying a paid game, Google is also introducing Game Trials, which let you jump into the full version of a paid game for free. If you like it, you buy it, and your progress carries over seamlessly.

What other improvements can you expect as a gamer?

Google is introducing a new PC section designed to improve the discoverability of games optimized for PC gaming. At the same time, it’s expanding the library with more paid titles and highlighting some of the most anticipated indie games.

Beyond that, Google is doubling down on Play Games Sidekick, an in-game overlay that gives you AI-generated tips without forcing you to quit and search the web. Google is also making it easier to get tips from real players. Community Posts is now live in English for dozens of popular games, providing you with a dedicated space to ask questions and share tips with other players.

These updates don’t reinvent gaming, but they address real frustrations in ways that matter to gamers.

Advertisement

Source link

Continue Reading

Tech

Stihl BGA 30 Cordless Blower Review

Published

on

Verdict

The Stihl BGA 30 leaf blower is a handy and lightweight leaf blower that runs on small batteries. With a detachable nozzle and responsive trigger, it’s easy to use but isn’t powerful enough for large garden spaces.


  • Lightweight and well balanced

  • Compatible with the AS system

  • Power level indicator on the handle

  • Not the most powerful air flow

  • Short run time on full power

Key Features


  • Lightweight


    At just 1.7kg, this leaf blower is easy to use and store


  • Powerful for the size

    Advertisement


    Can blow air at up to 15m/s


  • Cordless


    Uses the 10.8V AS battery system

Introduction

Forming part of Stihl’s capable and ever-expanding range of handy garden tools powered by the lightweight AS battery system, the BGA 30 is an ultra-portable leaf blower that still manages to pack a punch.

Advertisement

With excellent ergonomics and a lightweight and portable body, this leaf blower lacks raw power but is incredibly easy to operate. 

Advertisement

Design and Features

  • Well balanced between battery and tip
  • Battery charge indicator on the handle
  • Removable nozzle tip for close up work

Something that Stihl always gets right is ergonomics and balance. The handle is well sculpted and just about big enough for large hands, and is built at the right angle for leaf blowing, so I could hold it naturally without having to bend my wrist. Weighing just 1.7 kg with the battery, it’s very light which reduces arm fatigue during use. 

The variable speed trigger is responsive, and makes it easy to control the level of air flow coming out.

Stihl BGA 30 Cordless Blower controlsStihl BGA 30 Cordless Blower controls
Image Credit (Trusted Reviews)

When you pull it a little set of LED lights above the handle show you the current charge level. 

Stihl BGA 30 Cordless Blower battery meterStihl BGA 30 Cordless Blower battery meter
Image Credit (Trusted Reviews)

Advertisement

This leaf blower comes supplied with an easily detachable nozzle tip. Using it without the tip is great for clearing sawdust off a mitre saw or leaves and other debris from garden furniture. The long-reach nozzle tip is attached by twisting and locking into place. 

Advertisement
Stihl BGA 30 Cordless Blower front viewStihl BGA 30 Cordless Blower front view
Image Credit (Trusted Reviews)

The power comes from Stihl’s excellent little AS battery ecosystem. These batteries run at 10.8V and 2.6Ah, and weigh just 220 g. If you value comfort and manoeuvrability over raw power, this battery system is fantastic. It doesn’t have the capacity of much larger batteries like the EGO’s huge 56 Volt range, but carrying a spare AS battery with you is no problem and can be swapped out in seconds. 

If you have AS batteries already, you can buy the BGA 30 without batteries for just £99.

Stihl BGA 30 Cordless Blower battery installedStihl BGA 30 Cordless Blower battery installed
Image Credit (Trusted Reviews)

And when it’s time to store the blower away, there’s a handy hanging eyelet on the back. 

Advertisement

Performance

  • Impressive power to weight ratio
  • Easy to handle and control
  • Not the highest air flow speeds

I measured the BGA 30 air flow at a maximum of 5.5m/s from 1m away. That’s a more gentle gust of air than larger leaf blowers with bigger batteries can do, but it’s still enough air flow for most typical garden jobs, from moving leaves and the like off a lawn, or clearing garden furniture of debris.

The BGA 30 offers a good power-to-weight ratio, so you can work without tiring yourself out too quickly. However, on full power, I only got around ten minutes working time, so it’s worth getting the version that comes with two batteries (or reusing batteries from other AS tools, such as the HSA 40 hedge trimmer or the RCA 20 Cordless Pressure Washer

Because the handle is large and the ergonomics are great, it was easy to manoeuvre this leaf blower. With the nozzle tip removed, it’s even lighter and easier to direct the air flow to where you need it. 

Advertisement

Another thing I like about this blower is that it’s quiet when you need to be. Unlike the harsh noise of the Ryobi RY18BLCXA-125, the BGA 30 is about as pleasant as a leaf blower can be. Running at just 64dB on low power and topping out at a manageable 81dB on high, it’s not going to annoy the neighbours too much. 

The drawback of this blower is that it doesn’t reach the high air speeds of other, larger models. It’s ideally suited for small gardens, but those with larger spaces and more mess to deal with will need a more powerful blower.

Advertisement

Should you buy it?

Advertisement

You want a compact and relatively quiet leaf blower.

If the thought of a huge and heavy monster of a blower puts you off, get this one. 

Advertisement

For all of it’s benefits, this small and highly portable blower lacks a bit of grunt. If you need to shift loads of leaves or work for long periods, the BGA 30 is not the right tool for you. 

Final Thoughts

Like most Stihl garden tools, the BGA 30 has a thoughtful and ergonomic design. Light enough to use for long periods of time and running on the small but mighty AS battery system, it favours good handling over huge amounts of airflow, making it a good choice for smaller spaces; those who have larger gardens may prefer a more powerful model from our guide to the best leaf blowers.

Advertisement

How We Test

We test every leaf blower we review thoroughly over an extended period of time. We use standard tests to compare features properly. We’ll always tell you what we find. We never, ever, accept money to review a product.

Find out more about how we test in our ethics policy.

  • Tested with a variety of garden debris
  • We measure wind speed and air flow

FAQs

Which batteries does the Stihl BGA 30 use?

This leaf blower uses the AS system 10.8V batteries, compatible with a growing range of tools.

Advertisement

Test Data

  Stihl BGA 30 Cordless Blower
Air speed 15cm (low) 6 m/s
Air speed 15cm (high) 15 m/s
Air volume 15cm (high) 216 m³/h

Advertisement

Full Specs

  Stihl BGA 30 Cordless Blower Review
Manufacturer Stihl
Weight 1.7 KG
Release Date 2025
First Reviewed Date 03/03/2026
Model Number BGA 30
Accessories Nozzle
Leaf blower type Cordless
Speed settings Variable trigger
Max air speed 15 m/s
Adjustable length

Source link

Advertisement
Continue Reading

Tech

Exploring Underwater Creativity With a 3D Printed Dive Helmet and Floating Air Supply

Published

on

3D-Printed Dive Helmet Floating Air Supply
Maker Hyperspace Pirate has created a dive helmet using a 3D printer, tons of fiberglass, and a lot of ingenuity. They transformed an old diving concept into something that works, at least for shallow pool diving. This helmet is modeled like old surface-supplied diving gear. Air rushes in from above and exhaust leaves from below, keeping the diver’s head dry inside a little upside-down plastic bubble.



This project demands precise measurements, so Hyperspace Pirate originally sketched up the dimensions of the helmet on cardboard: 7.5 inches wide, 9.75 inches deep, and 11.25 inches high. Then Onshape software was used to generate a digital model of the object. It was divided into four separate components to accommodate the maker’s 3D printer, a Prusa MK3S, and manufactured with varying layer thicknesses to balance speed and strength. The printer used ABS filament, and after printing, the components were bonded together and encased in fiberglass soaked in epoxy for added strength. He had to be cautious about the sort of resin used because the other type tends to attack the ABS pieces.


Bambu Lab A1 3D Printer, Support Multi-Color 3D Printing, High Speed & Precision, Full-Auto Calibration…
  • High-Speed Precision: Experience unparalleled speed and precision with the Bambu Lab A1 3D Printer. With an impressive acceleration of 10,000 mm/s…
  • Multi-Color Printing with AMS lite: Unlock your creativity with vibrant and multi-colored 3D prints. The Bambu Lab A1 3D printers make multi-color…
  • Full-Auto Calibration: Say goodbye to manual calibration hassles. The A1 3D printer takes care of all the calibration processes automatically…

Three large transparent acrylic panes, one in the front and one on each side, provide visibility and are press-fitted into position and sealed with silicone caulk. The weight of the water at deep forces the windows in and closes them securely. A carry handle on top allows you to move the item about, and there are some useful small fittings for installing lighting or a camera.

3D-Printed Dive Helmet Floating Air Supply
Air enters through a small SAE fitting on the top of the helmet, which has a check valve to prevent air from flowing back in if the supply fails. Any extra air leaves at the back through a long, hollow PVC pipe, resulting in constant bubbles. The air supply is handled by a quiet oilless compressor, the MAC100Q type, which produces a consistent 40 liters per minute at up to 2 bar of pressure. This allows us to dive down to approximately 10 meters (33 feet) without running out of air. The rig is powered by a 12-volt, 35 amp-hour lead-acid battery connected to a 2 kilowatt pure sine wave inverter. It’s all mounted on a pool inner tube float, with a flat piece of plywood for stability and a handy diver-down flag.

3D-Printed Dive Helmet Floating Air Supply
Ballast weights, which are positioned on either side and held in place by a pair of large steel plates, work to keep the helmet underwater. We began with 30 pounds of weights, but after a few initial tests, we added an additional 10 pounds to achieve neutral buoyancy. A neoprene pad protects the neck against pressure points.

3D-Printed Dive Helmet Floating Air Supply
The helmet got a good workout in the pool, with dry runs ensuring proper fit and airflow, and underwater sessions allowing the builder to move around. We’ve had to be careful not to go too deep, partly because the bottom of the pool is a little uneven, but the airflow keeps it nice and cool and dry inside, preventing the windows from fogging or overheating. The compressor ran smoothly, and we were relieved that the helmet did not overheat. There was one peculiarity, however: the exhaust pipe would occasionally give out a small gurgling. It was a little unpleasant at the time, but it turned out to be harmless.

3D-Printed Dive Helmet Floating Air Supply
Safety has always been a key priority here, which is why the oilless compressor is a must-have. It means there is no risk of oil vapor or exhaust fumes entering the helmet. And just in case something goes wrong, we have a check valve to prevent the air pressure from decreasing quickly. Despite the fact that the helmet works extremely well for shallow water tasks, Hyperspace Pirate is quick to point out that this is still very much an experimental project, and it is not safe to use in open water or much deeper water without some serious modifications to make it waterproof, as well as a bit of backup air to be safe.
[Source]

Advertisement

Source link

Continue Reading

Tech

NVIDIA- and Uber-backed Nuro is testing autonomous vehicles in Tokyo

Published

on

US self-driving startup Nuro, which is backed by the likes of NVIDIA, Toyota and Uber, has started testing its autonomous vehicles on Tokyo’s challenging streets, Bloomberg reported. The company, which plans to launch a robotaxi service with Uber and Lucid in San Francisco this year, will be testing a “handful” of vehicles in the city. Human safety drivers will be at the wheel, as is required by Japanese law.

Tokyo presents a challenge for autonomous vehicles, given its narrow, crowded streets and left side of the road driving. “Testing the capability of the autonomy system in such an interesting market with some international complexity really is a good pressure test of what the system is capable of,” said CEO Andrew Chapin. The company’s ultimate goal is to achieve Level 4 autonomy, which allows full self-driving under limited conditions.

Waymo is the other major robotaxi operator testing vehicles in Tokyo in collaboration with Japanese taxi operators Nihon Kotsu and the country’s leading taxi app, Go. It has been operating in the nation since April 2025 in collaboration with Toyota.

Nuro has yet to announce which operators or vehicle manufacturers it will be partnering with, but Chapin said it may not limit itself to autonomous rides. “A universal autonomy platform that can be extended to a lot of different applications and form factors is a bit different than the approach Waymo is taking,” he told Bloomberg. The company previously teamed with 7-Eleven on autonomous deliveries in Mountain View, California.

Advertisement

Uber plans to have up to 100,000 autonomous vehicles including 20,000 robotaxis powered by Lucid and Nuro, with a rollout starting in 2027. It introduced its new vehicle design recently at CES 2026. Uber is also collaborating with Nissan and Wayve with the aim to introduce pilot cars in Tokyo by late 2026.

Source link

Continue Reading

Tech

Born as Wave in the Seattle area, Astound Broadband is merging with GFiber as new internet provider

Published

on

(Images via Astound, GFiber)

Stonepeak and Alphabet announced Wednesday that they have entered into an agreement to combine Astound Broadband and GFiber, creating an independent broadband internet provider and marking the latest shift for a telecom brand with deep roots in the Seattle region.

Under the terms of the deal, Stonepeak will hold a majority stake in the combined entity, while Google parent Alphabet will retain a significant minority interest. The new company will be led by the existing GFiber management team, the companies said in a news release.

In January, Bloomberg reported that Alphabet was in talks with Stonepeak’s Radiate Holdings — the parent company of Astound — to explore a joint venture involving its fiber assets.

For the Pacific Northwest tech corridor, the deal is the latest chapter for a business born in Kirkland, Wash., as Wave Broadband. Founded by Steve Weed, Wave grew into a dominant regional challenger to traditional cable giants.

The brand has undergone several identity shifts in recent years. After being bundled with RCN and Grande Communications under TPG ownership, the “Wave” moniker was officially retired in 2022 in favor of the unified Astound Broadband name.

Advertisement

The transaction represents a consolidation of two major players in the high-speed internet market. Astound, which provides service in several major U.S. markets including Seattle, Chicago, and New York, was acquired by Stonepeak from TPG Capital in 2021 for $8.1 billion. The merger integrates those assets with GFiber’s established footprint in cities such as Austin, Atlanta, Nashville, and Salt Lake City, along with its recent expansion into Las Vegas.

“This is a milestone for the industry as we combine the strengths of two highly complementary organizations,” Stonepeak Senior Managing Director Cyrus Gentry said in a statement. “By joining Astound’s extensive network and customer base with GFiber’s technical leadership, we are creating a scaled platform uniquely positioned to deliver the next generation of high-speed connectivity.”

The combined entity will compete against national incumbents Comcast, Charter, and AT&T, as well as aggressive regional fiber providers like Ziply Fiber and 5G home internet offerings from T-Mobile and Verizon.

The deal — subject to customary closing conditions and regulatory approvals — is expected to close later this year.

Advertisement

Editor’s note: Astound Business Solutions is presenting sponsor of the 2026 GeekWire Awards.

Source link

Continue Reading

Tech

Beavers Are Not Moose: Buc-ee’s Sues Competitor Over Cartoon Moose Branding

Published

on

from the oh-buc-off dept

Alright, I think it might be time for a wellness check on the people running Buc-ee’s.

I realize that these chain of gas and convenience stores has a strange cult following in the south. I won’t pretend to understand why that is, but whatever. Unfortunately, the company also appears to be run by a bunch of trademark bullying jackwagons. I’ve referred to Buc-ee’s as the Monster Energy of gas stations, because the company appears to think that trademark law allows it to own the concept of a cartoon animal mascot in any tangential industry. They have bullied and/or sued many, many companies under this premise. Because most of its victims are smaller companies, they have gotten a lot of settlements out of these bullying efforts.

But those settlements don’t make the bullying legitimate. Buc-ee’s views on what trademark law allows it to own and control are fantasy. They’re still out here doing their bullying thing, though, with the latest example being its decision to sue a company that runs a gas station called “Mickey’s”. I’ve embedded the suit below, but here is a sample of the claims in the filing made against the gas station chain.

Like the Buc-ee’s Marks, Defendant’s Logos incorporate a cartoon animal facing right with wide eyes and a smile, overlaying a round background…also uses red as a predominant color in its interior and exterior signage, as well as employee uniforms and anthropomorphic representations of its cartoon moose mascot…also uses red as a predominant color in its interior and exterior signage, as well as employee uniforms and anthropomorphic representations of its cartoon moose mascot.

Consumers are likely to perceive a connection or association as to the source, sponsorship, or affiliation of the parties’ products and services, when in fact none exists, given the similarity of the parties’ logos, trade channels, and consumer bases.

Advertisement

And here, dear readers, is the very similar branding that the lawsuit references.

Once again, as with past Buc-ee’s trademark suits, the claims simply fall apart on inspection of the evidence. These logos are not similar. They don’t use the same overall color schemes. They feature easily distinguishable cartoon animals as mascot. A beaver is not a moose, which is a sentence I never thought I’ve have to type out on a keyboard. Likewise, a hexagon is not round, another thing I’d never thought I’d have to write. This is all very, very stupid, and not at all concerning from a customer confusion standpoint.

Despite that, the suit alleges that Mickey’s has “used” the Buc-ee’s logos to enrich themselves. It’s bonkers. In addition, Buc-ee’s has petitioned the USPTO to cancel the trademark registrations Mickey’s has for its branding.

Why is this company so beloved? They truly seem like craven bullies above all else. None of this is trademark infringement and I certainly hope the owners of Mickey’s are prepared to fight this fight. Because Buc-ee’s doesn’t somehow have a monopoly on cartoon character mascots. Not for its industry, never mind others.

Advertisement

Filed Under: beaver, moose, trademark

Companies: buc-ee’s, mickey’s

Source link

Advertisement
Continue Reading

Tech

Keep Your Intuition Sharp While Using AI for Coding

Published

on

This article is crossposted from IEEE Spectrum’s careers newsletter. Sign up now to get insider tips, expert advice, and practical strategies, written in partnership with tech career development company Parsity and delivered to your inbox for free!

How to Keep Your Engineering Skills Sharp in an AI World

Engineers today are caught in a strange new reality. We’re expected to move faster than ever using AI tools for coding, analysis, documentation, and design. At the same time, there’s a growing worry in the background: If the AI is doing the work, what happens to my skills?

That concern isn’t just philosophical. Research from Anthropic, the company behind Claude, has suggested that heavy AI assistance can interfere with human learning—especially for more junior software engineers. When a tool fills in the gaps too quickly, you may deliver working output without ever building a strong mental model of what’s happening underneath.

More experienced engineers often feel a different version of this anxiety: a fear that they might slowly lose the hard-earned intuition that made them effective in the first place.

Advertisement

In some ways, this isn’t new. We’ve always borrowed solutions from textbooks, colleagues, forums, and code snippets from strangers on the internet. The difference now is speed and scale. AI can generate pages of plausible solutions in seconds. It’s never been easier to produce work you don’t fully understand.

I recently felt this firsthand when I joined a new team and had to work in a codebase and language I’d never used before. With AI tools, I was able to become productive almost immediately. I could describe a small change I wanted, get back something that matched the existing patterns, and ship improvements within days. That kind of ramp-up speed is incredible and, increasingly, expected.

But I also noticed how easy it would have been to stop at “it works.”

Instead, I made a conscious decision to use AI not just to generate solutions, but to deepen my understanding. After getting a working change, I’d ask the AI to walk me through the code step by step. Why was this pattern used? What would break if I removed this abstraction? Is this idiomatic for this language, or just one possible approach?

Advertisement

The shift from generation to interrogation made a massive difference.

One of the most powerful techniques I used was explaining things back in my own words. I’d summarize how I thought a part of the system worked or how this language handled certain concepts, then ask the AI to point out gaps or mistakes. That process forced me to form my own mental models rather than just recognizing patterns. Over time, I started to build intuition for the language’s quirks, common pitfalls, and design style. This kind of understanding helps you debug and design, not just copy and paste.

This is the core mindset shift engineers need in the AI era: Use AI to accelerate learning, not to replace thinking.

The worst way to use these tools is also the easiest: prompt, accept, ship, repeat. That path leads to shallow knowledge and growing dependence. The better path is slightly slower but more durable. Let AI help you move quickly, but always come back and ask, Do I understand what I just built? If not, use the same tool to help you understand it.

Advertisement

AI can absolutely make us faster. Used well, it can also make us better at our jobs. The engineers who stay sharp won’t be the ones who avoid AI, they’ll be the ones who turn it into a collaborator in their own learning.

—Brian

When war strikes, critical power infrastructure is often hit. Engineers in Ukraine have risked their lives to keep electricity flowing, and some have been hurt or killed in the dangerous wartime conditions. One such engineer, Oleksiy Brecht, died on the job in January. “Brecht’s life and death are a window into the realities of thousands of Ukrainian engineers who face conditions beyond what most engineers could imagine,” writes IEEE Spectrum contributing editor Peter Fairley.

Read more here.

Advertisement

The semiconductor industry needs more engineers to build the chips that power our daily lives. To help expand the talent pool, the industry is testing new approaches, including training software engineers to design hardware with the help of AI tools. All engineers will still need to have an understanding of the fundamentals—but could computer science students soon apply their coding skills to help design hardware?

Read more here.

Effective writing and communication are among the most important skills for engineers looking to advance their careers. Though often labeled a “soft skill,” clear communication is essential in both academia and industry. IEEE is now offering a course covering key writing skills, ethical use of generative AI, publishing strategies, and more.

Read more here.

Advertisement

From Your Site Articles

Related Articles Around the Web

Source link

Advertisement
Continue Reading

Trending

Copyright © 2025