Connect with us

Tech

Buchardt Audio Announces S400 MK3 Bookshelf Speaker With Major Design Upgrades

Published

on

Great loudspeakers come from all corners of the world, and Denmark has produced more than its fair share of them. Buchardt Audio may not have the century long legacy of some of its Nordic neighbors, but the company has built a loyal following over the past decade with a simple formula: compact loudspeakers that deliver a far bigger, fuller sound than their modest size might suggest.

That approach was cemented with the original S400, which we reviewed in 2021 and quickly became one of the most recommended standmount speakers in its class. Buchardt refined the concept shortly thereafter with the S400 MKII, introducing a revised crossover and higher quality internal components, followed by the S400 MKII Signature with further tuning refinements. For 2026, the Danish brand is pushing the platform forward once again with the announcement of the S400 MK3, the next chapter in a design that has been evolving since its first prototype appeared in 2016.

buchardt-s400-mkiii-loudspeaker-black
Buchardt S400 MK3

Buchardt Audio S400 MK3: Larger Cabinet, New Drivers, and a Ground Up Redesign

The S400 MK3 represents a significant redesign of Buchardt’s most recognizable loudspeaker platform. The new model introduces a larger cabinet, newly developed drivers, improved treble resolution, and greater dynamic capability, while aiming to preserve the balanced and natural presentation that helped define the earlier S400 models. According to Buchardt, almost nothing from the previous S400 generation carries over to the MK3, with the exception of the speaker binding posts.

One of the most visible changes with the S400 MK3 is the increase in cabinet size. Buchardt has expanded the internal volume by roughly 18 percent, giving the designers more room to extend low frequency performance and increase overall dynamic headroom. Despite the added volume, the company says the cabinet retains the clean proportions and minimalist aesthetic that made the original S400 such a recognizable design.

buchardt-s400-mkiii-loudspeaker-natural-oak

S400 MK3 Tweeter: New 26 mm Aluminum Dome with Custom Waveguide

The S400 MK3 features a newly developed 26 mm (1.02-inch) aluminum dome tweeter paired with a redesigned waveguide. Rather than chasing extra brightness or exaggerated top end energy, Buchardt focused on improving refinement and perceived resolution.

The goal was greater clarity and treble detail while maintaining the smooth, natural presentation that has defined the S400 series. According to the company, the new tweeter and waveguide combination helps deliver more precise high frequency dispersion and improved integration with the midbass driver, without introducing listening fatigue.

Advertisement

S400 MK3 Woofer: 7.5-Inch SB Acoustics Driver with Satori PAPYRUS Cone

At the core of the S400 MK3 is a 7.5-inch woofer sourced from SB Acoustics, built around the company’s Satori PAPYRUS paper cone technology. Compared with the driver used in the S400 MKII, the new unit offers 65.5 percent greater displacement headroom, giving the MK3 significantly more room to move air.

The result is increased dynamic capability, stronger bass authority, and more physical impact from a standmount speaker that still maintains relatively compact proportions. Combined with the 18 percent increase in cabinet volume, the new woofer gives the S400 MK3 greater low frequency extension and overall scale than previous versions of the design.

buchardt-s400-mkiii-loudspeaker-walnut-rear

S400 MK3 Bass System: Rear Port Replaces the Passive Radiator

Rather than continuing with the passive radiator used in earlier S400 models, the S400 MK3 adopts a rear mounted portand a traditional bass reflex design. The change allows Buchardt to deliver bass that remains tight, extended, and powerful while taking advantage of the larger cabinet and higher displacement woofer.

The trade off with any ported design is the possibility of minimal port noise under very specific conditions, but in normal listening this should remain largely inaudible. Placement remains relatively flexible for a rear ported speaker; Buchardt recommends leaving at least 5 cm (2 inches) of space between the port and the rear wall to ensure proper airflow and consistent low frequency performance.

S400 MK3 Crossover: Simplified Network with Premium Jantzen Components

Buchardt continues its partnership with Jantzen Audio for the S400 MK3’s crossover network. The updated design uses premium components throughout the signal path but adopts a somewhat simpler topology than the network used in the previous S400 MKII.

Advertisement
Advertisement. Scroll to continue reading.

The new crossover employs first order filters, a design choice often associated with improved phase coherence and a more natural integration between drivers. While simpler in layout, the network still relies on high quality components to maintain the tonal balance and musical flow that have defined the S400 platform.

Comparison

S400 MK3
(2026)
S400 MKII Signature Edition
(2023)
S400 MKII
(2021)
S400
(2019)
Product Type Bookshelf Speaker Bookshelf Speaker Bookshelf Speaker Bookshelf Speaker
Price (Pair) $2400 $2,850 $2,400 $1,833
Operating Principle 2-way passive bass reflex system 2-way passive radiator system 2-way passive radiator system 2-way passive radiator system
Tweeter 1″ Waveguided custom aluminum dome with neodymium matrix motor 0.74″ Custom fine weave soft fabric textile with CDC aluminum waveguide 0.74″ Custom fine weave soft fabric textile with CDC aluminum waveguide 0.74″ Custom fine weave soft fabric textile with CDC aluminum waveguide
Mid / woofer 7.5” SB Acoustics Satori PAPYRUS™ paper cone with   6″ Linear long stroke paper cone 6″ Linear long stroke paper cone 6″ Aluminum cone with break-up optimization
Passive Radiator 5×8″ Long stroke passive radiator 5×8″ Long stroke passive radiator 5×8″ Long throw passive radiator with very low mass added
Port Yes
Impedance 4 ohms 4 ohms 4 ohms 4 ohms
Sensitivity 88 dB 87 dB 87 dB 87 dB
Frequency response +/- 3dB (in-room) 33 – 20,000 Hz 33 – 40,000 Hz 33 – 40,000 Hz 33 – 40,000 Hz
Crossover Point 2400hz 1800hz 1800hz 2000hz
Power Recommendation From 30 watts –  Upper limit depends on use case, please contact Budchart for recommendations. 40 – 200 W 40 – 200 W 40 – 200 W
Dimensions (HWD) 392 x 198 x 280 mm 
(15.4” x 7.8” x 11”)
365 x 180 x 280 mm
(14.4” x 7” x 11”)
365 x 180 x 280 mm 
(14.4” x 7” x 11”)
365 x 180 x 240 mm
(14.4” x 7” x  9.4”)
Weight (each) 8.5 kg 7.5 kg 7.5 kg 9 kg
Speaker Grilles 4 x 7.5″ Included Black acoustical optimized fabric grilles Included Included Included
Cabinet 15mm Fiberboard HMR.E2 Moisture-proof with internal bracing. Either painted or real wood veneered. 15mm HDF with internal bracing. 15mm Fiberboard HMR.E2 Moisture-proof with internal bracing. 
Either painted or real wood veneered. 
15mm Fiberboard HMR (Moisture-proof) with internal bracing
buchardt-s400-mkiii-speaker-terminals-rear

The Bottom Line 

The Buchardt Audio S400 MK3 continues a design philosophy that Buchardt clearly believes in: compact standmount speakers engineered to deliver the scale, bass authority, and dynamics normally associated with much larger loudspeakers. With its larger cabinet, higher displacement woofer, new waveguided tweeter, and simplified crossover, the MK3 looks like a meaningful evolution of a platform that has been steadily refined since 2016.

At $2,400 USD per pair, the S400 MK3 enters one of the most competitive segments in the loudspeaker market. Models from KEF, Wharfedale, Paradigm, Acoustic Energy, and Chesky Audio are all fighting for the same buyers looking for high performance from relatively compact cabinets. The S400 MK3’s appeal will likely come down to its reputation for delivering big, room filling sound and strong bass output from a standmount design, making it a compelling option for listeners who want serious scale without moving to floorstanding speakers.

buchardt-s400-mkiii-loudspeaker-black-grille-off

Pricing and Availability

The S400 MK3 is available through Buchardt’s website for pre-order, with 75 pairs offered per finish at the introductory price (see below). Estimated delivery is expected to start by late Summer 2026.

  • S400 – $2,400 in black/white or $2,574 in real wood veneer (US)
  • S400 – €2,300 in black/white or €2,450 in real wood veneer (EU)

Pre-order now at buchardtaudio.com and save €200.

Advertisement

Source link

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tech

Adobe agrees to pay settlement for making its subscriptions hard to cancel

Published

on

Adobe has agreed to pay the US government $75 million to settle its lawsuit over the company’s allegedly harmful approach to subscriptions. The suit started in 2024, when the US Department of Justice and the Federal Trade Commission filed a joint complaint alleging the company deliberately made it difficult to cancel subscriptions and obscured the frequently expensive “early termination fee” customers have to pay to get out of annual subscriptions that are paid monthly.

“While we disagree with the government’s claims and deny any wrongdoing, we are pleased to resolve this matter,” Adobe writes. “We have agreed to provide $75 million worth of free services to customers that qualify. We will proactively reach out to the affected customers once the appropriate filings with the Court are made and accepted. Additionally, we have agreed to a $75 million payment to the Department of Justice.”

Adobe’s statement also notes that it’s made the process of both signing up for and canceling subscriptions “more streamlined and transparent.” A major sticking point of the original complaint is that canceling an “annual plan, paid monthly” subscription before completing the first year of service required customers to pay an early termination fee to make up for the value Adobe lost initially offering its software at a discount. Adobe currently allows plans to be refunded if they’re canceled within 14 days after signing up, but canceling an “annual plan, paid monthly” subscription after those first 14 days requires paying a hefty fee (as outlined in the company’s detailed support page).

A court will have to approve Adobe’s proposed settlement before the lawsuit can be totally resolved, but the timing is at least a little ironic. Shantanu Narayen, Adobe’s CEO for the last 18 years and the executive who oversaw the company’s transition from traditional software business to software-as-a-service business, recently announced plans to retire.

Advertisement

Source link

Continue Reading

Tech

How to Make a Killing review: a serial killer story should not be this boring

Published

on

Why you can trust TechRadar


We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.

How to Make a Killing was one of my most anticipated new movies of 2026. Unfortunately I was left feeling underwhelmed by A24’s latest venture, which doesn’t stand up against a catalog of greats.

Remakes are risky enough as it is, but Kind Hearts and Coronets is an especially tough act to follow. The iconic 40s movie brought something new to the table, with Alec Guinness especially stealing the show as he played eight members of the same wealthy family.

Advertisement

Source link

Advertisement
Continue Reading

Tech

The Top-Rated Luxury Tire Brand Is No Longer Michelin, According To JD Power

Published

on





A key part of the appeal of any great luxury car is its comfortable, smooth ride, but making the most of that ride will require the right tires. A 2025 study by JD Power surveyed luxury car owners to see which manufacturer delivered the most consistently satisfactory luxury car tires, with three manufacturers achieving scores above the segment average. In third place was Pirelli, the historic Italian tire company that’s now partly owned by Chinese investors. The second-place spot went to Michelin, with first place in the survey awarded to Goodyear.

This marks a reversal of fortune for the top two brands compared to 2024, when JD Power ranked Goodyear second and Michelin at the top of the table. The 2025 survey didn’t elaborate on the potential reasons behind Goodyear’s new, higher ranking. However, JD Power’s director, Jason Norton, was quoted as saying that “the overall experience of tire traction and handling during poor weather conditions […] is one of the top customer concerns.” He added that “a greater focus on quality” improved the chance that customers would become repeat customers of a tire brand.

The survey asked owners how happy they were with their tire purchases, based on four criteria. According to JD Power, the two most important areas were tire ride and tire wear, but handling and appearance were also taken into account in the ranking.

Advertisement

Bridgestone scored worst overall in the luxury category

At the other end of the luxury car tire rankings, JD Power’s least satisfactory brand was Bridgestone. It returned a score of 783, well below the segment average of 798 and significantly less than Goodyear’s score of 821. The Korean tire brand Hankook and Continental were joint second-least satisfying in the luxury category. Both scored 795 points, just below the segment average.

Goodyear’s score in the luxury tire category proved too high for its rivals to beat, but luxury car tires weren’t the only segment where the brand did well. It also took top spot in the passenger car tire category and achieved a second-place finish in the performance sport category. The only segment in which Goodyear didn’t perform well was the truck and utility category, where it received a score only marginally above the segment average. Thankfully, buyers looking for top-rated truck tires have a plethora of other options available, with JD Power ranking Hankook and Michelin as the most satisfactory brands in that category.

Advertisement



Source link

Advertisement
Continue Reading

Tech

Meta is bringing more international news to its AI

Published

on

Meta AI should soon be better at surfacing international news content thanks to a set of new deals with publishers. The company announced new agreements with international outlets and offered additional details on its recent deal with News Corp.

The latest deals bring French newspaper Le Figaro, Spanish media company Prisa and German newspaper Süddeutsche Zeitung into the fold. Together, along with News Corp, which runs a number of outlets in the UK, these sources should give Meta AI better access to timely info about world events. Meta didn’t disclose terms of the deals — The Wall Street Journal previously reported the News Corp arrangement was worth up to $50 million a year — but it said that it intends to link out to the relevant news sources.

“These integrations will also facilitate easier access to information by linking out to articles, allowing you to visit these partners’ websites for more details while providing value to partners, enabling them to reach new audiences,” Meta wrote in an update. The company has a long and sometimes fraught history with publishers as its priorities have shifted over the years. In the past, Meta has struck deals to pay publishers to produce live video and “instant articles” only to change course as news content has become less of a priority for Facebook.

Now, with Meta struggling to compete with its AI rivals, it seems the social media company is once again interested in news content. As the company notes in its blog post, Meta AI isn’t always great at surfacing accurate and timely info. I noted this in 2024 when the company’s assistant was repeatedly unable to accurately answer seemingly simple questions like ” who is the Speaker of the House of Representatives.”

Advertisement

By striking a bunch of deals with publishers, the company should be better equipped to handle these kinds of queries (and hopefully more complex ones). How much benefit publishers will see from these arrangements, however, is an open question. While Meta says it will link out to the relevant news sources, there are lots of outside data points that raise serious questions about the effect AI search tools are having on web traffic.

Source link

Continue Reading

Tech

Ford, Take Note: Classic Pickup Becomes The EV We Want

Published

on

Ford does sell an electric pickup, but not very many of them. We can’t say for sure, but it’s possible that if the F150 Lightning had the classic cool of [ScottenMotors] 1977 F150 SuperCab conversion they’d have better numbers.

The battery box sits where a V8 used to choke on well-meaning emissions controls.

On Reddit, [Scotten] shares the takeaways from his conversion effort, which involved a custom Tesla-cell battery pack and a new rear axle assembly to house the Tesla SDU (Small Drive Unit). A Large Drive Unit (LDU) would probably fit, but the SDU already puts out 264 HP, which compares rather favourably to the 156 HP this truck’s malaise-era V8 put out stock. The old F-bodies were great trucks in a lot of respects, but even an die-hard ICE enthusiast is probably not going to be sad to see that motor go.

Choosing to put the integrated drive unit in the rear axle complicates the build compared to other conversions that re-use the

Before the bed goes on, you can see the new rear axle with the Tesla SPU. There might be room for another, smaller battery under there.

stock transmission and differential, but saves you all the losses associated with that frankly unnecessary powertrain hardware.  The takeaway there is to figure out all the mechanical work on the chassis, because the EV stuff is actually the easy part. [Scotten] had the wheels turning a full year before he got the brakes figured out, because even if they’re just the rears and even if there’s regen– you want all the breaks to work on your test drive.

With the 100kW power pack, he’s getting about 220 miles of range. From the pictures, it looks like he’s filled up most of the hood space with that battery, but we can’t help but wonder if there’s room under the bed where the gas tank(s) lived to squeeze in more cells for those of us who need to go further.

Sadly the design isn’t open source, but [ScottenMotors] is apparently doing conversions on commission and open to selling kits; you can check that out on their website. In that, he’s following in the series-hybrid footsteps of Edison Motors.

Advertisement

While we respect the hustle to design an all-new rear end in this hack, you don’t even have to pull the internal combustion engine if you want to play on easy mode. You don’t need to be a nanoscience professor like [ScottenMotors] to pull off an electric truck, for the record– [Mr.G]’s high school class did a great job on a kei truck.

Thanks to [JohnU] for the tip!

Source link

Advertisement
Continue Reading

Tech

OpenAI reportedly plans to add Sora video generation to ChatGPT

Published

on

OpenAI plans to add its Sora video generation model directly into ChatGPT, The Information reports . The standalone Sora app was seen as a smash hit when it launched alongside Sora 2 in September 2025, but interest in the video generation app has fallen in the time since as users ran into limits on the amount and kinds of videos they could create.

Adding Sora to the ChatGPT could give the model a second life, and ideally grow the ChatGPT app’s weekly active users from the 900 million OpenAI reported in February, to a billion or more. According to The Information, the standalone Sora app will stick around after the model is integrated, even though the app has fallen out of the App Store’s top 100 free apps and only a small number of users reportedly share their videos publicly in the app.

It’s hard to pin down an exact number for what generating a video costs OpenAI, but the company charges API customers $0.10 per second for a 720p video, and in 2025, it was willing to give away 30 free video generations per account per a day in the Sora app. When you consider the even larger audience that could use the model in the ChatGPT app, things could get expensive fast. That could be one reason The Information reports OpenAI has projected it could spend over $225 billion on inference — the cost of running the company’s models — between 2026 and 2030.

The company has attempted to monetize the Sora app by having users pay for credits to generate new videos, and could deploy something similar once the model comes to ChatGPT. Maybe giving customers the ability to generate videos with Disney characters could even get people to pay for more videos once they run out of free generations. Whether or not adding Sora to ChatGPT moves the needle for OpenAI, though, the company will likely be spending even more money than it was before.

Advertisement

Source link

Continue Reading

Tech

‘Not built right the first time’ — Musk’s xAI is starting over again, again

Published

on

And then there were two: Of the original 11 co-founders who kickstarted xAI with Elon Musk three years ago, only two remain as the deep learning lab continues a personnel overhaul to compete with Anthropic and OpenAI. That rebuilding, insists Musk, is by design.

“xAI was not built right first time around, so is being rebuilt from the foundations up,” Musk said Thursday on his social media platform, X. By most measures, it isn’t going all that smoothly.

The most immediate pressure is competitive. This week, xAI co-founders Zihang Dai and Guodong Zhang left the outfit after Musk complained that the company’s AI coding tools were not effectively competing with Claude Code or Codex, rival programming assistants made by Anthropic and OpenAI, respectively. Musk said the company held an all-hands meeting on Wednesday that focused on how to catch up, which he predicted would be possible by the middle of this year.

Coding tools matter so much because they’re where the money is. While an early-year surge of users was powered by xAI’s lax regulation of Grok’s ability to produce sexual and even abusive imagery, coding tools are seen as the key revenue-generating tech for AI labs. That makes xAI’s current lag in this area more than a perception issue; it’s a business problem.

Advertisement

The personnel overhaul extends well beyond this week. A month ago, 11 senior engineers at xAI, including two co-founders, left the company following changes Musk described as a reorganization to suit a larger business. That effort was apparently insufficient: The Financial Times reported that SpaceX and Tesla executives have parachuted into the company to evaluate employees and fire those who don’t make the grade.

The two remaining co-founders, Manuel Kroiss and Ross Nordeen, along with Musk, have their work cut out for them.

Musk is now casting a wider net for talent. On Thursday, he said on X that he and another colleage, Baris Akis, are currently reviewing rejected employment applications in the company, with an eye toward reaching out to promising candidates who should have had a chance to interview. “My apologies,” Musk added, addressing the pile of strangers he’d ghosted.

Techcrunch event

Advertisement

San Francisco, CA
|
October 13-15, 2026

For the sake of comparison, LinkedIn reports that xAI has just over 5,000 employees, compared to more than 7,500 at OpenAI and more than 4,700 at Anthropic.

Advertisement

On the hiring front, there’s at least one encouraging sign. Andrew Milich and Jason Ginsberg are joining xAI from the AI coding tool company Cursor, where the two held joint responsibility for product engineering. Unlike xAI, Cursor depends on frontier labs for access to the AI models it runs on. Their decision to join xAI may signal the importance of direct access to LLM and computing resources to run them — and suggest that xAI’s core asset, its own frontier model, is still an attractive draw.

Either way, the pressure to show results is as much external as it is internal. Now that xAI is part of SpaceX, and with a public offering of SpaceX shares anticipated, the cash-burning unit is under pressure to demonstrate real uptake on Grok, its LLM. (A stumbling AI division is not the story Musk needs investors to be reading.)

Longer term, Musk is betting on something bigger than coding tools. xAI’s Macrohard project — Musk is convinced the name is “a funny reference to Microsoft” — aims to create an AI agent capable of doing anything a white-collar worker can do on a computer. Toby Pohlen, chosen to lead the project in February, left within weeks, and this week, Business Insider reported that Macrohard was on pause.

Musk’s response has been to draft another of his companies into the project. He revealed for the first time that Macrohard is a joint effort with Tesla, which is also developing a complementary agent dubbed “Digital Optimus” — a reference to Tesla’s Optimus humanoid robot. In Musk’s description, the xAI language model would direct the Tesla agent as it performs tasks.

Advertisement

It’s ambitious; it’s also not unique. Instead, the vision is not far off from what Perplexity — an AI-powered search engine — is doing with its new “Everything is Computer” offering, which aims to offer enterprise users a dedicated “digital proxy” that can orchestrate their digital tasks. It also echoes what entrepreneur Peter Steinberger is now working on at OpenAI, after creating OpenClaw’s popular personal agents.

Source link

Continue Reading

Tech

TUS launches AI-powered digital platform for professionals and employers

Published

on

The ReSHAPE platform, using AI, enables professionals to retrain, upskill and ‘future-proof’ their careers.

The Technological University of Shannon (TUS) in Athlone has launched the Regional Skills Horizon and Pathways to Employment (ReSHAPE) platform, which is an AI-powered digital platform developed to support professionals based in Ireland’s midlands region, supporting economic development in regions such as Laois, Offaly, Longford and Westmeath. 

ReSHAPE is a collaboration between Munster Technological University (MTU), TUS and the University of Limerick (UL) and is part of a strategic initiative aiming to deliver education, training and skills development opportunities.

Users of the platform will be able to undertake a skills audit, identify transferable skills and access funded training opportunities. Employers can use the platform to identify organisational skills gaps and create workforce development strategies. Reportedly, the programme is designed to support thousands of learners across the midlands. 

Advertisement

Commenting on the launch, Prof Vincent Cunnane, the president of TUS, said: “The platform represents a transformative opportunity for workers and employers across the region. ReSHAPE provides a powerful new tool to help individuals understand their capabilities and connect with education pathways that support sustainable careers in a rapidly evolving economy. 

“The midlands is entering a new phase of economic transformation and ensuring people have access to the right skills at the right time is critical.”

Prof Maggie Cusack, the president of MTU added: “The collaboration between universities and industry partners was key to ensuring the platform delivers meaningful impact. ReSHAPE brings together education providers, industry and communities to ensure skills development is aligned with real workforce needs. 

“By combining data-driven insights with accessible training pathways, the platform will help thousands of people across the midlands build the skills needed for the jobs of the future. ReSHAPE is also demonstrating that collaboration across higher education, industry and government can support better, evidence-based skills planning at a national level.”

Advertisement

Also in the midlands, Danish drug-maker Novo Nordisk recently announced a €432m investment at its Athlone-based plant to advance its manufacturing capacity for GLP-1 drugs. The Minister for Enterprise, Tourism and Employment Peter Burke, TD called the news, “a vote of confidence in Athlone, the midlands and the skilled workforce we have worked hard to develop”.

He said: “It will help drive innovation, create highly skilled jobs and further strengthen Ireland’s pharmaceutical ecosystem.” 

Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.

Advertisement

Source link

Continue Reading

Tech

Two Lost ‘Doctor Who’ Episodes Found Intact in Waterlogged Collection

Published

on

Whovians, rejoice. The BBC is about to unlock a piece of Doctor Who history that even the TARDIS might have forgotten. Two lost episodes of Doctor Who, the iconic sci-fi series, will broadcast in April, the showrunner for the current season confirmed.

The two 1965 episodes, The Nightmare Begins and Devil’s Planet, were donated to the charitable trust Film Is Fabulous by the estate of an anonymous collector.

“The collector did recognize what he had, but how he acquired them has been lost to time,” Professor Justin Smith Leicester of De Montfort University, who led the recovery effort, told the broadcaster.

Advertisement

The researchers said that while most of the donor’s private collection was destroyed by water damage, the Doctor Who episodes were intact.

Doctor Who showrunner, Russell T Davies, celebrated the news on Instagram and said the episodes would air in the UK in April, though no US air date has been announced yet.

“Lost for 61 years! Best of all, these will be made available for FREE on the BBC iPlayer in April,” Davies wrote. 

Advertisement

He expressed gratitude to Film Is Fabulous for finding the lost episodes and encouraged people to donate to the registered charity. “Maybe they’ll find more! As the Doctor says… ‘Daleks!’” 

The episodes feature the first incarnation of the Doctor, played by William Hartnell, and a typical Dalek plot to take over Earth and the galaxy. 

In the 1960s and 1970s, the BBC had a policy of destroying film or reusing videotapes, leading to dozens of episodes of Doctor Who and other popular UK shows like Dad’s Army and Top of the Pops going missing.

Old Doctor Who episodes do surface occasionally, and in 2016, the newly discovered soundtrack for one storyline was turned into an animated series called The Power of the Daleks.

Advertisement

Meanwhile, Disney ended its working relationship with the BBC last year, and star Ncuti Gatwa left the show. However, the UK broadcaster says that Doctor Who will continue, and Russell T Davies is working on a new Christmas special.

Source link

Advertisement
Continue Reading

Tech

Instagram Discontinues End-To-End Encryption For DMs

Published

on

Meta plans to remove end-to-end encryption (E2EE) from Instagram direct messages by May 8, 2026. “Very few people were opting in to end-to-end encrypted messaging in DMs, so we’re removing this option from Instagram in the coming months,” says Meta. “Anyone who wants to keep messaging with end-to-end encryption can easily do that on WhatsApp.” The Hacker News reports: The American company first began testing E2EE for Instagram direct messages in 2021 as part of CEO Mark Zuckerberg’s “privacy-focused vision for social networking.” The feature is currently “only available in some areas” and is not enabled by default. Weeks into the Russo-Ukrainian war in February 2022, the company made encrypted direct messaging available to all adult users in both countries. Last week, TikTok said it would not introduce E2EE, arguing it makes users less safe by preventing police and safety teams from being able to read direct messages if needed.

Source link

Continue Reading

Trending

Copyright © 2025