Connect with us

Technology

Samsung may ditch the vanilla Galaxy S26, tipster claims

Published

on

Samsung may ditch the vanilla Galaxy S26, tipster claims

Samsung is reorganizing its product launch strategy this year. The company announced the Galaxy Tab S10 series without a base model, offering only Plus and Ultra versions. Samsung’s next step in this line would be to ditch the base Galaxy S26 model in 2026.

The Samsung Galaxy S26 series could only offer Plus and Ultra models

Ice Universe, a reliable tipster focused on Galaxy devices, said on X that Samsung is considering ditching the vanilla Galaxy S26. So, just like the Galaxy Tab S10 series, the South Korean giant would only offer Plus and Ultra variants. The main reason behind the change would be the poor competitiveness of the base Galaxy S devices against similar devices from big Chinese companies.

Recently, an OPPO representative confirmed that the upcoming OPPO Find X8 will be smaller than the current Find X7. This will make it a compact device, as it will also be lighter, thinner, and have reduced bezels. Ice Universe uses this product as an example of how Chinese companies are releasing compact phones that leave the base Galaxy S models out of the competition. Products like the Xiaomi 13 and Xiaomi 14 also do a fantastic job in this regard.

The Galaxy S FE devices would be their replacement

“You will realize that Galaxy S25 is no longer worth releasing,” claimed the tipster. Samsung will still release a base Galaxy S25 model, but it could definitively rule it out in the Galaxy S26 series of 2026. Another reason would be the existence of the Galaxy S FE models, which offer many of the key features of the main Galaxy S devices at a lower price. The company would consider the existence of a base Galaxy S and a Galaxy S FE a bit redundant.

Advertisement

Plus, while there are still people who value a compact format, there are even more who prioritize a lower price. The Galaxy S FE models meet that premise while appealing to a market that generally prefers bigger screens.

Samsung has also been offering FE models in the Galaxy Tab series for a while now. It’s possible that the popularity of the more affordable FE model compared to the base Galaxy Tab made it easier for the company to ditch it. The vanilla Galaxy S24 and Galaxy S25’s commercial performance will likely determine the future of these phones.

Source link

Advertisement
Continue Reading
Advertisement
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Servers computers

ARM yourselves! The Compute Blade is here.

Published

on

ARM yourselves! The Compute Blade is here.



It won’t turn you into a ninja, but it will help you build a Pi cluster.

Check out the Compute Blade on Kickstarter:

https://www.kickstarter.com/projects/uptimelab/compute-blade?ref=bfyfme

Mentioned in this video:

Advertisement

– Compute Blade: https://computeblade.com
– My open source Pi Cluster project: https://github.com/geerlingguy/pi-cluster
– Radxa CM3 and Pine64 SOQuartz review: https://www.youtube.com/watch?v=aXlcNVKK-7Q
– BigTreeTech CB1 Review in Livestream: https://www.youtube.com/watch?v=Krpac-MaD5s
– Compute Blade alpha review: https://www.youtube.com/watch?v=zH9GwYZu_aE

Support me on Patreon: https://www.patreon.com/geerlingguy
Sponsor me on GitHub: https://github.com/sponsors/geerlingguy
Merch: https://redshirtjeff.com
2nd Channel: https://www.youtube.com/c/GeerlingEngineering

Contents:

00:00 – This is the Compute Blade
00:34 – A Slice of Pi
03:35 – Why blade?
06:15 – Pine64’s Blade
06:58 – Clone Wars
10:17 – Kickstarter and price .

source

Advertisement
Continue Reading

Technology

Acceleron Fusion has raised $15M to take another stab at cold fusion, filing reveals

Published

on

Acceleron Fusion has raised $15M to take another stab at cold fusion, filing reveals

Fusion startups have been on a fundraising tear lately, and a young startup, Acceleron Fusion, is joining the pack, having raised $15 million of a targeted $23.7 million round, according to an SEC filing.

The fusion sector recently has been showered with interest from investors, who no doubt have been encouraged by the breakthrough experiment at the National Ignition Facility two years ago, which proved that a controlled fusion reaction could generate more power than was required to kick it off. 

The first company to build a power plant that can produce electricity that can be sold to the grid en masse could start chipping away at the multi-trillion-dollar global energy market. Tech firms, in particular, have been eyeing fusion and nuclear startups as possible pollution-free solutions to their AI-induced power demands.

Acceleron did not immediately reply to questions.

Advertisement

Where most startups aim to re-create the superheated, super-pressurized conditions inside of a star, Acceleron takes a different approach, using subatomic particles known as muons to lower the heat and pressure required for fusion reactions to take place.

In nature, atoms tend to resist fusing, mostly because an atom’s orbiting electrons repel other atoms. To get around that, most approaches to fusion follow nature’s approach: they get atoms hot enough and close enough that their electrons are freed from their orbits, lowering the usual atomic inhibitions. As atomic nuclei zip around without their electrons, some ram into each other, fusing into a new nucleus and releasing enormous amounts of energy. That’s what happens inside a star.

Muon-catalyzed fusion takes a different tack. Instead of heating and compressing hydrogen isotopes, it injects muons into the mix. Muons are subatomic particles that resemble electrons — both have a negative charge — but their mass is 207 times greater. As muons bombard hydrogen isotopes, they replace electrons in some atoms. A muon orbits the nucleus of an atom much more closely than an electron, lowering the barrier atoms need to fuse.

In muon-catalyzed fusion, the barrier is low enough that fusion can occur at room temperature and pressure. That’s why it’s sometimes called cold fusion. While muon-catalyzed has been demonstrated in laboratory conditions, the energy required to generate muons has so far outstripped the amount of energy produced by any fusion reactions.

Advertisement

There are a few reasons why muon-catalyzed fusion hasn’t worked yet. For one, each muon only lasts for about 2.2 microseconds before it decays into less useful subatomic particles. That’s long enough to facilitate about 100 fusion reactions, but still too short for commercial power purposes. The other problem is that about 0.8% of the time, a muon gets stuck to another subatomic particle (an alpha particle) and doesn’t participate in any more fusion reactions. That may not seem like much, but again, it has been high enough to doom commercial plans.

Cambridge, Massachusetts-based Acceleron, which spun out of NK Labs, is hoping that by raising the pressure of the hydrogen isotope mix, and maybe the temperature, it’ll be able to reduce the rate at which muons stick to alpha particles. The hope is to keep enough muons in the mix to catalyze more fusion reactions, ideally enough more that they’ll offset the amount of power required to generate the muons.

NK Labs was awarded a three-year, $2 million ARPA-E grant in 2020 to explore whether higher pressure would improve the prospects of muon-catalyzed fusion. The results, not all of which are public at this time, appear to have piqued investors’ interests.

Source link

Advertisement
Continue Reading

Servers computers

The Chenbro SR115 is a 4U rackable or tower server chassis with eight PCIe slots for adding more I/O

Published

on

The Chenbro SR115 is a 4U rackable or tower server chassis with eight PCIe slots for adding more I/O

source

Continue Reading

Technology

The next iPhone SE may lose the home button, add Face ID and Apple Intelligence

Published

on

The next iPhone SE may lose the home button, add Face ID and Apple Intelligence

That the new iPhone SE models may support Apple Intelligence says a lot about their performance — it takes a lot of RAM to run local AI features, for instance. They’re expected to look like the iPhone 14, doing away with the chunky top and bottom bezels and the home button; both are firsts for the entry-level smartphone. It’s also rumored that the iPhone SE 4 will get an OLED screen, rather than the usual LCD.

Apple will produce 11-inch and 13-inch iPad Airs with “internal improvements” at the same time as the new SE models, Gurman writes. And right along with those will be new Magic Keyboards for both sizes that will come with some iPad Pro keyboard features.

Finally, according to Gurman, before the year is through, Apple will release new M4-equipped computers: a smaller Mac Mini, new MacBook Pros, and iMacs. He reckons an update to the iPad Mini is also possible.

Source link

Advertisement
Continue Reading

Technology

AWS forced to pay out millions in major patent dispute

Published

on

AWS forced to pay out millions in major patent dispute

A US jury has ruled Amazon Web Services (AWS) willingly infringed on two patents, and must now pay $30.5 million for violating the patent owner’s rights in computer networking and broadcasting technology.

The offending technologies were AWS’s Cloudfront content delivery network and Virtual Private Cloud virtual network – which infringed on the patents originally owned by Boeing, but obtained by Acceleration Bay.

Source link

Advertisement
Continue Reading

Servers computers

Home Lab Build – P.2 – Rack has evolved!

Published

on

Home Lab Build - P.2 - Rack has evolved!



Quite a few changes to the server rack, starting with a patch panel and another ethernet switch. From here, I’ve mounted a KVM switch, mouse, keyboard, and monitor.

Part 1: https://youtu.be/CIQ20FWs478

Hardware purchase links:
Patch Panel: https://amzn.to/3nrAODB
KVM switch: https://amzn.to/3bFuTbE
KVM switch VGA & USB cables: https://amzn.to/3yxXXuo
Boxx rack mount machines: https://www.boxx.com/
1U drawer: https://amzn.to/3ycRP9U
2U drawer: https://amzn.to/3y6BXWf
Rack monitor mount: https://amzn.to/3y9uu8M

Neural Networks from Scratch book: https://nnfs.io
Channel membership: https://www.youtube.com/channel/UCfzlCWGWYyIQ0aLC5w48gBQ/join
Discord: https://discord.gg/sentdex
Reddit: https://www.reddit.com/r/sentdex/
Support the content: https://pythonprogramming.net/support-donate/
Twitter: https://twitter.com/sentdex
Instagram: https://instagram.com/sentdex
Facebook: https://www.facebook.com/pythonprogramming.net/
Twitch: https://www.twitch.tv/sentdex

Advertisement

Contents:

0:00 – Networking
1:23 – KVM Switch (TRENDnet 2-in-1 USB VGA KVM)
3:11 – rack mounting the Boxx machine
5:49 – Rack mounting a monitor
8:24 – Server rack flooring 🙂
8:55 – Blanking panel, 2U drawer, outro

#server #homelab .

source

Advertisement
Continue Reading

Trending

Copyright © 2024 WordupNews.com