Connect with us
DAPA Banner
DAPA Coin
DAPA
COIN PAYMENT ASSET
PRIVACY · BLOCKDAG · HOMOMORPHIC ENCRYPTION · RUST
ElGamal Encrypted MINE DAPA
🚫 GENESIS SOLD OUT
DAPAPAY COMING

Tech

Cisco warns of unpatched SD-WAN zero-day exploited in attacks

Published

on

Cisco

On Thursday, Cisco warned of a high-severity, unpatched zero-day in the Cisco Catalyst SD-WAN Manager (tracked as CVE-2026-20245) actively exploited in attacks enabling root privilege escalation.

The zero-day flaw impacts all deployment types, including On-Prem Deployment, Cisco SD-WAN Cloud-Pro, Cisco SD-WAN Cloud (Cisco Managed), and Cisco SD-WAN for Government (FedRAMP).

In a Thursday advisory, Cisco said the issue stems from insufficient validation of user-supplied input, and it can allow local attackers with low privileges to execute arbitrary commands as root.

image

“An attacker could exploit this vulnerability by uploading a crafted file to the affected system. A successful exploit could allow the attacker to perform command injection attacks on an affected system and elevate their privileges as the root user,” the company explained.

“To exploit this vulnerability, the attacker must have netadmin privileges on the affected system. This would require valid credentials or exploitation of CVE-2026-20182 or CVE-2026-20127. Cisco is not aware of successful exploitation by other methods,” it added. “Cisco is not aware of successful exploitation by other methods. Cisco has observed limited cases where the exploitation of this bug resulted in a configuration change pushed to edge devices.”

Advertisement

Formerly known as SD-WAN vManage, this network management software helps admins monitor and manage up to 6,000 Catalyst SD-WAN devices from a single dashboard.

Cisco’s Product Security Incident Response Team (PSIRT) became aware of CVE-2026-20245 exploitation in June after Google Cloud cybersecurity subsidiary Mandiant reported the flaw but did not share any details.

However, it shared indicators of compromise (IOCs) warning admins to check their SD-WAN /var/log/scripts.log file for attempts to upload tenant configuration data to vSmart controllers to escalate privileges through legitimate commands, as in the following example:


Apr 15 09:44:57 vmanage vScript: Tenant list upload per vsmart serial number: /usr/bin/vconfd_script_upload_tenant_list.sh -cli path /home/admin/malicious.csv vpn 0

“For help determining if a Cisco Catalyst SD-WAN Manager has been compromised, customers may open a case with the Cisco TAC,” the company added, advising admins first to generate an admin-tech file to help with the review.

Advertisement

Security patches not yet available

Last month, Cisco also tagged a maximum severity Catalyst SD-WAN Controller authentication bypass flaw (CVE-2026-20182) as actively exploited as a zero-day to gain administrative privileges on unpatched devices.

While Cisco has not yet released patches for CVE-2026-20245, it advised customers to upgrade to the software fixed for CVE-2026-20182 on May 14.

In February, Cisco patched another Catalyst SD-WAN Manager information disclosure security flaw (CVE-2026-20133), which CISA flagged as actively exploited in late April, and, two weeks later, warned that two more flaws (CVE-2026-20128 and CVE-2026-20122) were being abused in the wild.

In March, it also addressed and flagged a critical authentication-bypass vulnerability (CVE-2026-20127) that has been exploited in zero-day attacks since at least 2023.

Advertisement

Over the last several years, CISA has tagged 90 Cisco vulnerabilities as abused in the wild, four of them in Cisco Catalyst SD-WAN Manager and six others exploited by ransomware operations.


article image

Security teams log 54% of successful attacks and alert on just 14%. The rest move through your environment unseen.

The Picus whitepaper shows how breach and attack simulation tests your SIEM and EDR rules so threats stop slipping by detection.

Get the whitepaper

Source link

Advertisement
Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

Add Sensors To Everything! | Hackaday

Published

on

“You can’t control what you can’t measure” goes the old chestnut. But that’s a little bit negative, in my opinion. Instead, think of the benefits of sprinkling sensors around everywhere: you gain insight where you simply didn’t have it beforehand.

We were thinking about this in the context of the recent video on pressure advance in 3D printers. Essentially, the unmelted filament acts as a springy piston, and that springiness means that the pressure built up in the melted plastic lags the feedrate of new filament. We usually calibrate this out with a guesstimate constant, but it can be different for every different filament. Measuring that pressure directly with a strain gauge in the hot end makes more sense.

But then there are knock-on benefits of having a sensor in the hot end. You can use the strain gauge as Prusa does to run the nozzle gently into the bed and set the z-axis height. Or you can use over-pressure as a sign that the nozzle is clogged. It’s quite possible that you can use it to signal other things that can go wrong as well, but you can’t tell until you put the sensor on in the first place.

Advertisement

Of course, you don’t want to put a pressure sensor where you want to know the temperature, or vice-versa. But as a general rule, the more you can measure, the more you can discover about the way your system is running. How many strain gauges are too many?

Source link

Advertisement
Continue Reading

Tech

3D On The Playdate Handheld

Published

on

The Playdate is a small handheld console with a dedicated fanbase. Among them is [Cristina Ramos], who recently decided to try and push the limits of the hardware by implementing a 3D renderer for the platform.

[Cristina] began by implementing a raycaster. This is a very simple way to do 3D on limited hardware, and this technique was used by some early games like Wolfenstein 3D. However, for [Cristina], it was more a test to get an idea of the performance limitations of the Playdate. After getting her feet wet with that, she stepped up to implementing a renderer that relied on binary space partitioning, which could load map files in the same format used by the classic Quake engine. There was naturally plenty of work to do to handle things like texture mapping and lighting, too, particularly given the vagaries of working with the Playdate’s 1-bit monochrome screen. Using a simplistic, cel-shaded like approach for textures gave things a good look while preserving visual readability on the low-resolution screen.

The 3D engine and associated game remain a work in progress for [Cristina] — we look forward to seeing where the project goes next. We’ve seen similar projects on resource-limited platforms before, too.

Advertisement

I was told you couldn’t do 3D on the Playdate, so I did it.Then I was told there was no way I could create exterior levels like those in Mirror’s Edge, so I proved them wrong again.

Cristina Ramos (@saffroncr.bsky.social) 2026-07-22T08:57:09.594Z

Source link

Advertisement
Continue Reading

Tech

Facebook Verified is here to confirm whether your friend is AI

Published

on

Meta has announced Facebook Verified, a free badge that will be visible on a user’s profile and is designed to confirm whether that user is a real person or an AI without actually checking that a user is who they say they are.

The new badge is separate from Meta’s existing Meta Verified program and is available to eligible Facebook users who are 18 or older. Users must also be in good standing with Facebook’s community standards before they can be verified.

Alongside profiles, Facebook users will also be able to see a person’s verified status in the Marketplace, Facebook Dating, and Facebook Groups initially. However, Meta has confirmed that it intends to bring the badges to the main feed in the future.

Free, basic verification

Importantly, unlike Meta Verified, Facebook Verified doesn’t require a subscription and is available absolutely free. Users only need to complete the verification process once.

Advertisement

The verification process itself requires Facebook users to record a short selfie video. Facebook then uses the video to check the person’s appearance against their existing profile photos to confirm a match. The process should take just a few minutes.

However, it’s important to know what Facebook Verified actually verifies. Meta says that it means a profile belongs to a real person, not an AI.

Facebook Verified does not necessarily mean that the person is who they say they are. That’s an important distinction to remember when using Facebook from here on out.

Meta says that Facebook Verified will roll out in phases, starting with “select markets.” Unfortunately, it hasn’t confirmed which markets those are.

Advertisement

Source link

Continue Reading

Tech

Malicious sites use JavaScript to build malware in browser memory

Published

on

Malicious sites use JavaScript to build malware in browser memory

A massive malvertising campaign is using fake Solana, Luno, and TradingView webpages with malicious JavaScript that instructs browsers to assemble malware directly in memory.

The operation has been active since late 2024 and is localized to 25 languages in 12 countries, primarily in Asia Pacific and Latin America.

A filtering system ensures that only real targets (retail traders and crypto investors) land on the malicious pages, while researchers, scanners, and security bots are redirected to blank pages.

image

Ad security platform Confiant says that the campaign’s design stands out through its use of the web browser as “a local assembly pipeline” for the malware.

Although the fake portals feature a download button, a ReactJS library on the landing page prepares the browser for a managed download flow, a process typically used for handling various types of file transfers.

Advertisement
Fake Trading View site
Fake TradingView site
Source: Confiant

According to Confiant’s analysis, the page first registers a service worker, which acts as a download manager and helps build the malware file incrementally.

In the first stage, the page sets up a shared worker that acts as an engine that assembles the malware from components received in the next steps of the attack.

The researchers say that in the second stage “the landing page uses its SharedWorker to request itself for a ‘/config’ response” with seed and size parameters that are randomized and specific for each session.

By rotating these parameters, the threat actors make sure that the resulting malware file has a unique hash to bypass static detection.

Confiant explains that “‘/config’ is an assembly response rather than a normal download response. It returns a template and the inputs the browser needs to build the file locally.”

Advertisement

Remote components retrieved this way and the locally generated bytes are then used to create the malicious payload from a clean version of the Bun executable.

After building the final malware executable, the fake download page hands it to the service worker at the beginning of the process and triggers a same-origin download path.

“From the browser’s point of view, the user is downloading an executable from the landing page domain,” Confiant researchers say, and the mark-of-the-web tag is added, despite some of the components originating from a different source.

The advantage of this technique is that no finished file is transmitted over the network, making detection less likely, and analysis becomes more challenging.

Advertisement

Confiant says that earlier variants of the SourTrade campaign used the StreamSaver project on GitHub to deliver the malicious payload. Since April, though, the operation switched to the same-origin ServiceWorker delivery method.

While Confiant researchers do not reveal the nature of the payload, they found evidence supporting a Bitdefender report in 2025 about a resilient  malvertising campaign that used StreamSaver to distribute malware.

Bitdefender found that the payload had the following capabilities:

  • intercept all user network traffic (acting as a proxy)
  • collect cookie and password data
  • record keystrokes (keylogging) and take screenshots
  • steal cryptocurrency wallet data
  • establish long-term persistence

Since the SourTrade campaign targets retail traders and crypto investors, users engaged in these activities are advised to avoid downloading financial or cryptocurrency apps from social media advertisements or sponsored search results.

The researchers advise getting executable files from the company’s official website. As an added precaution, they should verify the installer’s digital signature and publisher before running it.

Advertisement

article image

Security teams log 54% of successful attacks and alert on just 14%. The rest move through your environment unseen.

The Picus whitepaper shows how breach and attack simulation tests your SIEM and EDR rules so threats stop slipping by detection.

Get the whitepaper

Source link

Continue Reading

Tech

Samsung Galaxy Z Fold 8 Ultra vs Galaxy Z Fold 8: which foldable should you choose?

Published

on

Samsung has unveiled three new foldable phones — the Samsung Galaxy Z Fold 8, the Samsung Galaxy Z Fold 8 Ultra, and the Samsung Galaxy Z Flip 8. And while the last of that trio falls into its own category, the former two phones have a lot in common.

Aside from having similar names, they’re both book-style foldables, and they also share plenty of specs. But between very different form factors and differences in their respective camera setups, there’s lots to differentiate them, too.

Source link

Advertisement
Continue Reading

Tech

Qualcomm’s chip price hikes could make phones, wearables, and laptops even pricier

Published

on

Ripple effect: As rising memory costs push up the prices of everything from PCs and smartphones to game consoles, one key hardware supplier after another has announced that it can no longer delay price hikes. This time it’s Qualcomm, with a fast-approaching adjustment that could make smartphones, tablets, wearables, and some laptops even less affordable.

Qualcomm issued a letter to its clients on Friday warning that its chips will soon become more expensive due to rising supply costs. The company develops chips that power most Android devices, numerous wearables, automotive systems, and a rising crop of Arm-based laptops, so the impact is expected to be widespread.

Bloomberg, which obtained the letter, reports that price hikes will rise by an unspecified double-digit percentage, and will apply to components shipped after September 1. Qualcomm has been unable to escape the skyrocketing supply costs that have impacted Microsoft, Apple, Sony, and numerous other manufacturers.

Memory and storage are the biggest culprits, having quintupled in price since late last year as AI data center construction absorbs most of the available production capacity of DRAM and NAND manufacturers. RAM prices could rise by another 40% to 50% in the third quarter of this year, then an additional 30% to 40% in Q4. The ripple effect has also pushed up the prices of CPUs, printed circuit boards, and other components. Qualcomm at least partially blames its upcoming price hike on the need to find alternative suppliers.

Advertisement

Samsung phones, which are powered by Qualcomm’s Snapdragon processors, might be the most popular affected products. However, wearable devices like smart glasses and VR headsets also use chips from the same family. Additionally, Microsoft and various PC manufacturers are attempting to promote an alternative Arm-based version of Windows via new lineups of more powerful Snapdragon SoCs.

Qualcomm’s adjustment might also affect Google’s plans to launch a lineup of Snapdragon-based laptops using a new Android-based operating system later this year.

Qualcomm’s products even extend to the AI data centers responsible for the component shortages. The company recently unveiled ambitious plans to compete with Nvidia in the server CPU market.

The situation is expected to worsen next year due to further price hikes from the manufacturer that Qualcomm, Apple, Nvidia, Google, Amazon, Arm, and MediaTek all rely heavily upon: TSMC. Recent reports indicate that the chipmaker will raise prices for most of its semiconductor nodes at least once next year by around 10%, creating a much broader ripple effect.

Advertisement

Source link

Continue Reading

Tech

Librarians are hosting viral ‘Avoiding AI’ workshops for people who are fed up with Big Tech

Published

on

“Everybody’s on their phone at my program!” joked Charlie Bailey, a librarian in South Philadelphia. He’s just asked his audience to pull out their phones so that he can walk them through the steps of disabling Apple Intelligence and Gemini.

Bailey stands at the front of a library classroom that’s outfitted for children – the focal point is the vibrant rug he’s standing on, which reminds us that M is for “moon” and Z is for “zebra.” But the 20-odd adults in the room aren’t here to learn about the alphabet. They’re at a workshop called Avoiding AI, which, in this context does not stand for “apple” and “igloo.”

“I was inspired by the feeling of people’s frustration with AI tools being kind of forced onto them, and feeling like AI tools we didn’t ask for are suddenly everywhere in our lives,” Bailey told TechCrunch.

Bailey starts the hour-long workshop with an overview of how AI chatbots and other consumer AI tools work, explaining why people might want to use these products, and why they might opt to abstain. Then, he walks through all of the most popular tech platforms and devices, showing step-by-step instructions on the projector to guide people through turning off specific features.

Advertisement

“As a librarian, I think it’s important to see this as advancing digital literacy and helping people reclaim their autonomy over whether they want to use AI tools,” Bailey said. “It’s important, especially when it can be so difficult not to use them, and when the design seems to force adoption.”

Charlie Bailey hosts an "Avoiding AI" workshop
Charlie Bailey hosts an “Avoiding AI” workshopImage Credits:TechCrunch

Bailey got the idea for the Avoiding AI workshop from Hannah Cyrus, a librarian in Maine. He was one of dozens of librarians from around the world who contacted Cyrus after she published a journal article about developing her own workshop.

“This has never happened before with anything I’ve worked on,” Cyrus told TechCrunch. “Nobody has ever been emailing me like, ‘Can you give me your Intro to Computers slides?’”

At the Bangor Public Library, patrons turn to Cyrus when they need help with anything involving technology.

“More and more, I was getting questions about, ‘How do I turn this [AI] stuff off? Why is it trying to write my emails for me? Why is it trying to summarize my one-sentence email that I can easily read?’” Cyrus said. “I just decided that with so much media hype out there about AI products, it would be a good opportunity to teach people about the basics of what is happening when you’re using this technology, and then getting into how to turn it off if you don’t want to use it.”

Advertisement

Usually, Cyrus’ classes like Intro to Computers get about a dozen attendees. But so many people expressed interest in her first Avoiding AI workshop that she had to cut off registration at 30 people, open a waitlist, and share the workshop on Zoom. Including the livestream, about 70 people attended each of Cyrus’ first two workshops.

When Bailey followed Cyrus’ lead to host a workshop in Philadelphia, the reception was similarly unprecedented. The library’s Instagram post about the “Avoiding AI” event got over 2,000 likes and 220 shares, whereas most of the library’s posts don’t get more than a few dozen likes. He scheduled a second program because the first got too many registrations.

“As an information professional, it feels good to see people skeptical of AI,” Bailey said. “It felt really good to see how many people share this feeling.”

There’s a sense of camaraderie among the room of strangers during the workshop. When Bailey invites attendees to share their own tips, one person explains that when you append “&udm=14” to a Google Search, it will hide AI results. Bailey writes the string of characters down on a whiteboard next to the log-in credentials for the teen Wi-Fi server.

Advertisement

“You have to go through all the trouble to buy a home in today’s world, and two years from now, there could be a data center next to your house,” one workshop attendee named Johnny says.

“I keep getting AI shoved down my throat at work, and every time I see it, I think about the environment,” another attendee named Gabrielle adds. But she’s also not writing off AI as a technology altogether. “I’m not against AI in terms of medical breakthroughs.”

AI naysayers know that this technology is far broader than just chatbots and deepfake apps. Cyrus mentioned how useful optical character recognition is for scanning old documents at the library. But for her and the people who go to her workshops, the anti-AI movement isn’t about rejecting technology altogether so much as it is about advocating for more control, agency, and freedom in how people use technology.

“I think the forced adoption of AI on people’s devices might be the straw that’s breaking the camel’s back in some ways,” she said. “The awareness has been growing for a long time that these products and these companies that make them have an outsized influence over us, and that we’re not really using these products in the way that we would like to.”

Advertisement

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

Source link

Advertisement
Continue Reading

Tech

Administration Accelerating Immigration Hearings To Ensure Migrants Miss New Court Dates

Published

on

from the cruelty-is-all-they-have dept

No punishment is too vindictive. No cruelty is too small. The administration that is openly seeking to create a white Christian nationalist autocracy will do whatever it can to expel as many non-white people from this nation as possible.

Trump and his cabinet members constantly claim the country has been overrun by dangerous foreign migrants, many of them from (direct quote right here) “shithole countries.” They blame Biden for this completely imaginary “crisis” and preach the same message to the faithful over and over again: “worst of the worst.”

But it’s not that and it’s never been that. If the administration was simply trying to eject dangerous criminals, ICE wouldn’t be sending officers to immigration courts to pounce on migrants who are following the rules for staying in this country. ICE wouldn’t have set up a fake college to snare foreigners following the visa rules by continuing their education. And the government wouldn’t be telling its lawyers to dismiss ongoing removal proceedings solely for the purpose of making migrants attending scheduled probation check-ins immediately arrestable.

It’s only getting nastier and uglier. The Trump administration is now moving up immigration hearing dates for the sole purpose of generating more unearned “wins” that will, in turn, generate more deportations. Here’s Gwynne Hogan with the brutally nasty details for The City Reporter:

Advertisement

The mass immigration hearings picked up in New York City in early June, The City Reporter reported at the time. They were dubbed mega masters because a single judge could be assigned a docket of more than 100 cases a day, about double a regular master calendar docket before.

In addition to the large number of cases, many of these hearings were scheduled just weeks in advance and replaced hearings people might have had on the books months or years away.

The City Reporter observed one such mega master hearing where, on a docket of 121 cases, 39 people and their family members were ordered removed for failing to show up to court. In some instances, family members’ cases were linked.

As this report notes, for years most hearing dates were generally scheduled 180 days out from the initial hearing. But in the past few months — along with the creation of these so-called “mega masters” — the lead time has dropped precipitously. In May, the average was 98 days. By June, it was 42 days.

This is deliberate. Migrants engaged in the legal process would have no reason to believe their cases would be accelerated. After all, the mass deportation surges the Trump administration has generated tens of thousands of new cases, which would generally result in additional delays, rather than sudden accelerations.

Advertisement

And while the government is required to notify migrants of schedule changes, it’s not as though it’s a push notification via the normally accepted form of human connection these days. It’s a letter sent by snail mail. And it’s not as though this government is going to perform any due diligence to make sure the notification is seen by the intended recipient.

What’s happening here is the administration flooding the docket and ambushing migrants who fail to check their hearing status daily and who would have no reason to do so when they hadn’t seen any changes to hearing dates for several months.

The plan is as ugly as it is shitty: accelerate thousands of hearing dates and send federal officers out to scoop up migrants who are now on the wrong end of in absentia rulings handed down by judges who are deliberately overloaded to prevent them from fully engaging with these cases.

This is all in service to the impossible deportation goals set by the administration. You can’t get 2-3,000 arrests per day without cheating. Here’s how this has been playing out over the past couple of months.

Advertisement

In June, 4,447 people were ordered removed by immigration judges in the [New York City] “in absentia,” meaning they’d missed their hearings, the report found. That was more than double the number in May when 2,189 were ordered removed in absentia. 

The analysis found the surge echoed a rise in absentia removal orders across the country. There were 53,808 such orders nationally in June, a 55% jump from a month earlier. 

The real human cost is as incalculable as it is heartbreaking:

On Friday morning, several dozen people managed to make it to a courtroom inside 26 Federal Plaza for their mega master hearing where Immigration Judge Thanos Kanellakos appeared virtually from a courtroom in Maryland, overseeing a docket of 90 cases.

Most of the people who made it to court had traveled hundreds of miles from Tennessee, Georgia, North Dakota and Illinois to attend.

[…]

Advertisement

Several people at court told The City Reporter they’d had a court date scheduled months or even years away when they happened to double-check the online portal recently and learned they had a new hearing scheduled a few days away.

There is no legitimate reason for the government to be doing this. There is only the constant desire to hurt human beings this administration considers to be less than human. That’s why it’s trying to eradicate temporary protected status for all but the whitest migrants. And that’s why it’s engaging in barely disguised entrapment to keep its flying rail cars and prison camps loaded with its preferred scapegoats.

Filed Under: bigotry, dhs, doj, due process, ice, mass deportation, mega master, trump administration

Advertisement

Source link

Continue Reading

Tech

Kalshi demands Netflix take down trailer for ‘Prediction Games’ documentary

Published

on

Prediction market Kalshi sent Netflix a cease-and-desist letter on Friday demanding that the streaming service take down the trailer for an upcoming documentary. In the letter, Kalshi claimed the trailer is “defamatory” and contains “both fabricated documents and false and misleading statements.”

“Instadocs: The Prediction Games” is a documentary about the rise of prediction markets. According to Netflix, the film — part of the streamer’s “Instadoc” series of fast-turnaround documentaries  — features interviews with both Polymarket CEO Shayne Coplan and Kalshi CEO Tarek Mansour.

The trailer, however, focuses on a recent party in Las Vegas, where men who have “made millions of dollars on prediction markets, probably eight figures, just over the course of the World Cup” have gathered to watch the World Cup final. One of the guests declares, “I like betting on Kalshi,” while another shows off an apparent $5,000 bet on their phone.

However, Kalshi is currently banned from operating in Nevada due to a court order. In its cease-and-desist letter, Kalshi said the bet shown on the phone is actually a screenshot of a bet made on May 16, 2025 — long before the ban. But the company argued that in the trailer, Netflix “misled its millions of customers into believing this individual was able to successfully trade sport event contracts in Nevada on July 19, 2026.”

Advertisement

In its letter, Kalshi also said that it recently spoke to a Netflix employee who “agreed not to feature the receipt in the documentary when it is released” on Sunday, July 26.

“However — despite Kalshi demonstrating to this employee that the claims in the video were demonstrably false — Netflix inexplicably refused to remove the receipt from the trailer currently circulating on the homepage of the Netflix app,” the company said.

Netflix doesn’t dispute that the screenshot is of a bet from 2025, but a spokesperson told The Hollywood Reporter that none of the documentary footage was fabricated.

“The footage was filmed at the Winible World Cup Watch Weekend in Las Vegas on July 17, 2026,” the spokesperson said. “The featured trader with the trade on Spain showed us a screenshot of his bet, that was made in May 2025 prior to any Nevada court order. Any specific trades or bets referenced during that weekend are between the individual and the app in which they placed the trades.”

Advertisement

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

Source link

Continue Reading

Tech

15 Famous Movie & TV Vehicles You Can Buy (But Probably Can’t Afford)

Published

on





When it comes to collecting items from movies and television shows, there are plenty of options. Above all, there are the vehicles, and in many shows and films, they’re highly collectible. More than a few people have built replicas of the TARDIS from “Doctor Who,” though this is something that only a handful of folks can do.

However, when you move to real vehicles, the costs skyrocket. This is especially true when they require heavy modifications. Add to that the fact that high-profile productions often pull out all of the stops to make their vehicles stand out, and getting your hands on something like Baby from “Supernatural” isn’t an inexpensive undertaking.

Restoring something built decades ago isn’t cheap, and costs tend to rise when collectability is taken into account. Regardless, there are a select few who have shelled out a ton of cash to ride in style. Each of these 15 vehicles comes from an incredibly popular show or movie, and while you can technically buy them all, odds are the sticker shock will keep you away.

Advertisement

Bullitt – 1968 Ford Mustang GT390 Fastback

“Bullitt” is one of the greatest car-chase movies from the 1960s, and its car has long been highly desired by collectors. In the film, Steve McQueen plays SFPD Lt. Frank Bullitt, and he drives a beautiful 1968 Ford Mustang GT 390 Fastback; and much of the action takes place on the road. 

The car is painted Highland Green with the GT package, featuring the 390 FE V8 engine with some modifications for filming. Two were used in the movie, and after filming wrapped, they disappeared. There’s a great story about how the car from “Bullitt” was finally found, but even if you wanted to get your hands on a film-used car, you’re going to have a tough time. 

Advertisement

The last time one sold was in 2020, and it went for $3.74 million. Fortunately, a non-screen-used ’68 GT 390 Fastback isn’t too hard to locate, so you can find them for sale every so often. Depending on condition, you can probably get your hands on one for around $58,000, though some sell for considerably more.

Advertisement

Supernatural – 1967 Chevrolet Impala

“Supernatural” is all about Dean (Jensen Ackles) and Sam (Jared Padalecki) Winchester, two brothers who travel about the United States killing monsters. The show ran for 15 seasons, and while it’s not exactly a character in and of itself, “Supernatural’s” 1967 Chevrolet Impala, known affectionately by Dean as “Baby,” might as well be one.

Prior to the show’s first episode airing in 2005, the ’67 Impala wasn’t the most iconic car. That’s since changed, and the Chevy has become one of the most collectible cars on the market for lovers of the series. There are several variations, but for Baby, it’s the 1967 SS Impala four-door hardtop with an eight-cylinder 427ci Turbo-Jet V8 engine.

Finding one in good condition isn’t too difficult, though because of the series, the cost of these beauties has steadily risen. On average, you can expect to pay around $66,750 for a decent one. Some sell for considerably more, while lower-end cars can run you as little as $20,000. The production used several Impalas, though Ackles managed to get the main one off the lot when filming wrapped.

Advertisement

Magnum P.I. – 1979 Ferrari 308 GTS

Tom Selleck dominated ’80s prime-time television on “Magnum P.I.,” and he did so while driving a red 1979 Ferrari 308 GTS. The car is iconic and expensive, though, fortunately, even Ferraris can become affordable (to some) after 50 years. That’s not to say that Thomas Magnum’s ride is cheap or easy to find.

The production used three Ferrari models, changing it up over the seasons, beginning with a 1979 308 to a GTSi, and finally a 1984 GTS Quattrovalvole, but the differences weren’t too noticeable to fans unfamiliar with the minor differences between models. They required modifications to accommodate Selleck’s height, but were otherwise the same cars a select few could afford to drive in the early 1980s.

In 2017, a 1984 model driven by Selleck on the show sold for $181,500. If you want to get behind the wheel of one that wasn’t seen on television, it won’t cost as much, but expect to shell out some serious cash. These average for around $77,000; like any car, condition matters, and some can go for around $130,000 or more.

Advertisement

Smokey and the Bandit – 1976 Pontiac Firebird Trans Am

When it comes to great car movies from the 1970s, look no further than “Smokey and the Bandit.” The action comedy film features an all-star cast and some seriously great driving scenes. Bo “The Bandit” Darville (Burt Reynolds) sat behind the wheel of a 1976 Pontiac Firebird Trans Am.

The car used in the film is a 1976 Trans Am with its front end restyled to look like the 1977 edition. Regardless, there are plenty of tribute cars decked out in black paint and gold trim that look, to the average viewer, like a so-called “Bandit Edition” Trans Am. You can usually find these cars for sale, but they often require some modifications.

Indeed, the car used in the film was heavily modified and made to look very different from what it actually was. It is occasionally possible to get your hands on one tied to the movie, as a promo car used by Universal Studios was sold at auction in 2016 for $550,000. Thriftier collectors can usually get a ’76 or ’77 Trans Am for around $82,000 on average.

Advertisement

Batman: The Movie – 1966 Ford Futura

Since his introduction in 1939, Batman has driven tons of vehicles, though the Batmobile is the most recognizable. There have been several versions over the years, but the most iconic is easily the car featured in the 1966 television series starring Adam West as the Caped Crusader. It may come as a surprise, but the production used a legit car to make the Batmobile.

The retro-futuristic design came about thanks to the 1955 Ford Lincoln Futura concept car, which was modified heavily to align with the show’s theme. Eventually, the Batmobile switched over to the 1966 Ford Futura, but the overall design scheme remained pretty much the same.

Advertisement

Owning the Batmobile isn’t an inexpensive endeavor, and the one featured in the 1966 feature film sold at auction in 2010 for $4.2 million. While it’s possible to find a reasonably priced replica for around $85,000, most require tons of modifications to bring them up to Batman’s approved specs, as the car that hit the market looks very different from the one driven by the Dark Knight.

Advertisement

Knight Rider – 1982 Pontiac Firebird Trans Am

“Smokey and the Bandit” wasn’t the only production to glamorize the Pontiac Trans Am, and one of the most well-known cars in ’80s television was a 1982 model. “Knight Rider,” the show that made David Hasselhoff a star, features a 1982 Pontiac Firebird Trans Am as K.I.T.T., voiced by William Daniels.

Because of the show’s popularity, the ’82 Trans Am became highly collectible — especially when the car is modified to feature K.I.T.T.’s various upgrades and alterations. These are fairly extensive, beginning with a light bar in the car’s grill and moving to the interior, which is not stock by any stretch of the imagination.

There are plenty of tribute cars out there, including one “Knight Rider” car that got a speeding ticket while parked in a museum. Tribute cars that look like K.I.T.T. can get expensive, running around $130,000 to as much as $150,000. That said, newer replicas sell for considerably less, with one from the 2008 revival series going for $44,000 in 2009, though it was hardly an ’82 Trans Am. Without modifications, one of those runs around $12,000.

Advertisement

Back to the Future – 1981 DeLorean DMC-12

Before “Back to the Future” hit the silver screen in 1985, the DeLorean DMC-12 was a failed car. After, it was a pop culture icon that’s so recognizable, the DeLorean nameplate managed to return from the dead. Regardless of the real vehicle’s fate, the movie car is one of sci-fi’s most celebrated, and it’s possible to own one.

While your 1981 DMC-12 won’t fly or travel through time, it can be modified to look just like the one from the movies. Most tribute cars and replicas take the car’s look from “Back to the Future Part II,” which features a Mr. Fusion alongside other items like the Flux Capacitor introduced in the first movie.

Getting a film-used DeLorean from “Back to the Future” isn’t likely, so you can do one of two things: buy a used ’81 car and modify it yourself or buy one that’s already been outfitted with all the bells and whistles. Unmodified, they can sell for around $40K, though the average price is around $130,000 for a pristine, working car. A modified one might run as much as $200,000.

Advertisement

The Dukes of Hazzard – 1969 Dodge Charger

One of the most recognizable cars from ’80s television is the General Lee, the 1969 Dodge Charger used in “The Dukes of Hazzard.” The car is painted bright orange with the number “01” emblazoned on the doors, while the Confederate Battle Flag is painted across its top.

The car is probably best known for its amazing stunts, but don’t be fooled — the production went through a lot of them. Across the series’ seven seasons, the folks behind “The Dukes of Hazzard” went through at least 329 different cars, destroying as many as two each episode. One of the best-known stunts involves the car flying up into the air after hitting a ramp while the Duke cousins cheer “Yahoo” while it arcs through the air.

If you don’t think that destroys a car’s vital parts, you’d be wrong. The ’69 Dodge Charger is highly collectible and has been featured in numerous series, including being Ghost Rider’s “Hell Charger” in “Marvel’s Agents of SHIELD.” On average, these cars go for around $150,000 in good condition, though a tribute car went for $62,700 in 2022.

Advertisement

Casino Royale – 2007 Aston Martin DBS V12

When it comes to classic cars and movies, the franchise with perhaps the most is James Bond. Beginning in 1962 with “Dr. No,” the Bond franchise exploded to include dozens of movies and plenty of iconic actors. It also features a ton of automobiles, and one of the most impressive arrived in 2006’s “Casino Royale,” which introduces Daniel Craig as the new Bond.

In the film, Bond gets behind the wheel of a beautiful 2007 Aston Martin DBS V12, which didn’t technically exist when the movie was shot. Aston Martin provided the production team with a 2006 model that featured a mockup of the body panels for the 2007 model.

Advertisement

This isn’t apparent when watching the movie, and the car looks incredible. As any enthusiast knows all too well, Aston Martin doesn’t make inexpensive cars, and this model’s MSRP was $256,000 in 2008. You can buy a 2007 model for around $222,000, but condition is everything, and a superb example can run considerably more. Still, if you’re incredibly lucky, they can sometimes sell for $110,000.

Advertisement

Ghostbusters – 1959 Cadillac Miller-Meteor

While most people weren’t interested in riding around in a hearse, that changed in 1984 when the ECTO-1 found its way to screens in “Ghostbusters.” The white hearse with tons of techno gadgets and the Ghostbusters logo became a cinematic pop culture icon, leading a small number of collectors to get their own versions.

For most people, that wasn’t an easy task, as the car used for the famous hearse was the 1959 Cadillac Miller-Meteor Futura Duplex, which was a huge vehicle that was used for all sorts of things, including functioning as a limousine and ambulance. It was also a hearse and much more, but there aren’t many of them left in the world.

Getting one from the movies is unlikely, as there are too few, but you can sometimes find them for sale sans modifications for around $231,000. You can also rent a replica through the Volo Car Museum, so there are options. One re-creation sold in 2025 for $297,000, so expect to shell out some serious cash on your way to becoming a semi-professional Ghostbuster.

Advertisement

Ferris Bueller’s Day Off – 1961 Ferrari 250 GT Spyder California

Even if you didn’t know a thing about Ferraris, you probably winced when Cameron (Alan Ruck) destroys his father’s 1961 Ferrari 250 GT Spyder California in “Ferris Bueller’s Day Off.” The car is such a focal point of Ferris and company’s skip day that it stands as one of the most important elements in the movie.

You’ll be happy to know that they didn’t actually destroy a real car because the production couldn’t afford it. They had three different replicas made for the shoot, which used a Moderna Spyder with no engine for the destroyed one seen in the movie. A real Ferrari 250 GT Spyder California sold in 2016 for $17.16 million, which explains the swap.

The real GT Spyder wasn’t worth as much in 1984, but it was still too expensive to destroy for a movie; the replicas were good enough. One of the two that weren’t destroyed sold for almost $400,000 in 2020, so while that’s out of most people’s price range, for a select few, it’s possible to get their hands on a “real” car used in the film.

Advertisement

The Cannonball Run – 1979 Lamborghini Countach LP 400 S

Perhaps one of the most famous racing movies of the 1980s is the Burt Reynolds comedy “The Cannonball Run.” The film is all about the real outlaw road race called the Cannonball Baker Sea-to-Shining-Sea Memorial Trophy Dash, which started in Connecticut and ended in California.

Reynolds plays J.J. McClure, and while he drives a 1974 Chevrolet Laguna, that’s not the most impressive car in the movie. That honor goes to the black 1979 Lamborghini Countach LP 400 S driven by Marcie Thatcher (Adrienne Barbeau) and Jill Rivers (Tara Buckman) in the film’s opening credits. The spandex-clad ladies flash some cleavage to distract some pursuing Nevada Highway Patrol officers.

As you can imagine, the car isn’t on the lower end, but you can buy your own version of the 1979 Lamborghini Countach from “Cannonball Run” with enough cash. They average around $536,000 in good condition, though they can sell for nearly $700,000 on the higher end. That’s not bad for a car that had an original MSRP of only $41,000, though that would be $188,595 in 2026 when adjusted for inflation.

Advertisement

Easy Rider – 1969 Harley-Davidson Captain America Chopper

There are tons of great motorcycles seen in movies and TV shows, but when you get right down to it, the most influential comes from “Easy Rider.” The road film sees two bikers make their way across parts of the United States, carrying cash from a drug deal as they ride the open road.

Dennis Hopper plays Billy, while Peter Fonda is Wyatt, and it’s his bike that’s the most iconic. He rides a 1969 Harley-Davidson Chopper with a Stars & Stripes paint job that earned him and the bike the nickname “Captain America.” The chopper is one of the most iconic motorcycles of the 1960s, and because it’s a chopper, you know that it’s already a custom job.

Advertisement

It features an elongated front end and stretched-out frame with a paint job that makes it stand out. The original bike from the film sold in 2024 for a record-smashing $1.35 million, and based on that and other sales figures, they can average as much as $592,000. Don’t let that sticker shock scare you away because some tribute bikes have been built for far less, amounting to around $30,000.

Advertisement

Iron Man – 1967 AC Shelby Cobra

While it would be nice to score Tony Stark’s (Robert Downey Jr.) armor from “Iron Man,” that’s pretty unlikely to happen anytime soon. Fortunately, there are other options, and if you pay attention to Stark’s garage, you’ll see that the man has a pretty sweet collection of classic cars.

While it doesn’t get much screen time, one of his most impressive is a 1967 AC Shelby Cobra. These are among the most desirable cars on the market, and it’s painful to see Iron Man crash into his, destroying it as you see in the above image. Thankfully, they didn’t actually smash a real one for the movie and instead opted for a so-called “re-creation rolling chassis.”

This was little more than an aluminum rendition of a ’67 AC Shelby Cobra. One of the rolling chassis sold in 2015 for $24,200, but don’t expect to get the real deal for anywhere near that price. There’s a pretty wide range, depending on condition, but it’s not uncommon to see a ’67 AC Shelby Cobra like the one recreated for “Iron Man” sell for around $1.1 million, while running replicas cost around 10-20% as much.

Advertisement

Goldfinger – 1963 Aston Martin DB5

While the Aston Martin featured in “Casino Royale” is an amazing piece of machinery, the most iconic vehicle from the franchise debuted decades earlier. Bond’s most recognizable car is his 1963 Aston Martin DB5 featured in 1964’s “Goldfinger.” Technically, it was a DB4 with prototype DB5 parts, but most fans couldn’t care less.

While you’ll be hard-pressed to load one with as many gadgets, it’s not impossible. Granted, you’re going to have to star in the next James Bond movie to be able to afford your very own because the ’63 Aston Martin DB5 is one of the most desired and expensive automobiles on the planet. The car’s model appears in eight of the franchise’s movies, though from different years.

Still, the ’63 model is at the top of most collectors’ lists. Aston Martin made 25 re-creations, fitted with plenty of gadgets and gizmos, which boasted a sticker price of $3.63 million, but there’s a cheaper option. A legit ’63 model can often go for as much as $1.7 million, though you might get away with spending only $1.3 million of your hard-earned cash to add one to your collection.

Advertisement



Source link

Advertisement
Continue Reading

Trending

Copyright © 2025