Security teams log 54% of successful attacks and alert on just 14%. The rest move through your environment unseen.
The Picus whitepaper shows how breach and attack simulation tests your SIEM and EDR rules so threats stop slipping by detection.
Tech
Arista patches VeloCloud Orchestrator zero-day exploited in attacks
Arista has patched a maximum-severity command injection vulnerability in on-premises VeloCloud Orchestrator deployments that is being actively exploited in attacks.
The vulnerability, tracked as CVE-2026-16812, is an unauthenticated OS command injection flaw with severity scores of 10.0, the maximum score that can be given to flaws.
VeloCloud Orchestrator, also known as VCO, is a centralized management platform used to configure, monitor, and manage VeloCloud SD-WAN deployments and associated edge devices.
According to an Arista security advisory published Monday, the vulnerability allows remote attackers to access privileged functionality that was intended only for internal use and should not be remotely accessible.
“Successful exploitation may compromise the confidentiality, integrity, and availability of the orchestrator and data managed by the orchestrator,” Arista warned.
The company says VCO is supposed to be exposed by default, with no configuration option that can prevent this exposure. Attackers only require network access to the VCO web interface, and no VCO tenant or operator credentials are needed to exploit the flaw.
Arista says CVE-2026-16812 was discovered externally and is known to be actively exploited, but has not shared when the attacks began, who is behind them, or how the vulnerability is being exploited. BleepingComputer has contacted the company with these questions.
The following VeloCloud Orchestrator on-premises versions are affected:
- VCO 5.2.x releases before 5.2.3.14
- VCO 6.1.x releases before 6.1.3.4
- VCO 6.4.x releases before 6.4.2.4
- VCO 7.0.x releases before 7.0.0.1
VeloCloud Orchestrator Hosted and Dedicated deployments were patched before the advisory was published and are not affected. VeloCloud Gateway and VeloCloud Edge products are also not vulnerable to the flaw.
The company says the flaw is fixed in VCO versions 5.2.3.14, 6.1.3.4, and 6.4.2.4 and later. The affected software list also indicates that VCO 7.0.0.1 and later releases are not vulnerable.
Arista warns that end-of-support software versions have not been assessed to determine if they are vulnerable. Customers running unsupported release trains are advised to contact the Arista Technical Assistance Center to discuss available upgrade options.
The U.S. Cybersecurity and Infrastructure Security Agency has also added CVE-2026-16812 to its Known Exploited Vulnerabilities catalog, confirming that the flaw is being used in attacks.
CISA has ordered U.S. federal civilian executive branch agencies to mitigate the vulnerability by Thursday, July 30, 2026, as required by Binding Operational Directive 22-01.
Indicators of compromise
While patches are being deployed, administrators should restrict access to the VCO web interface to administrative networks, monitor for connections from known malicious IP addresses, and review recent administrator activity for unusual changes.
Arista shared three IP addresses that were seen exploiting the vulnerability:
- 8.19.75.217
- 206.72.242.124
- 206.72.242.162
Administrators are advised to block these IP addresses and review their logs for previous connections. However, it is possible that devices could have been compromised from other IPs, so this list is not definitive.
Organizations should review VCO logs for signs of exploitation, including:
- Unusual web requests containing encoded characters, URL-like path components, references to local or internal services, or abnormally high request rates
- Connections from known malicious IP addresses
- Unexpected outbound HTTP or HTTPS traffic from the VCO host
- Unauthorized configuration changes or privileged maintenance activity
- Unexpected command execution, file creation, database exports, or archive files
- Suspicious access to VCO databases, configuration data, device inventories, credentials, certificates, or cryptographic keys
If compromise is suspected, organizations should preserve all logs and filesystem timestamps before remediation.
Potentially affected organizations should rotate credentials, review administrator activity, validate managed devices, and consider restoring or replacing compromised instances.
As successful exploitation can compromise both the orchestrator host and the data it manages, installing the security update may not be enough for systems that have already been breached.
Arista warns that compromising a VeloCloud Orchestrator instance could also give attackers access to VeloCloud Edge devices as well.
Continue Reading
A botnet called Dysphoria has compromised around 200,000 devices across the world and is using them for distributed denial of service (DDoS) attacks and traffic relay operations.
According to QiAnXin XLab cybersecurity researchers, Dysphoria evolved from the ‘jackskid’ and ‘fbot‘ malware by adding a covert blockchain-based command-and-control (C2) resolution mechanism.
Specifically, the botnet uses Ethereum ENS and Solana SNS domains to retrieve infrastructure information, while C2 addresses are concealed inside fake IPv6 strings and recovered using a custom byte-transformation algorithm.
The researchers first spotted Dysphoria on March 25 and identified multiple iterations that added meaningful updates, such as a C2 acquisition algorithm, multi-chain support, new domains, and functional separation between the relaying and DDoS variants.
“Since the first quarter of 2026, XLAB has continuously tracked an emerging botnet family named Dysphoria, whose bot count exceeds 200,000,” reads XLab’s report.
“In just a few months, the family has undergone frequent variant updates and technical iterations, demonstrating extremely strong resilience.”
The use of blockchain in C2 operations makes the overall infrastructure harder to trace and dismantle.
Based on the researchers’ analysis, infected clients send a fixed 78-byte login and heartbeat packet back to the C2 and receive from the operator DDoS attack commands that include duration, type, targets, and configurable flags.
Source: XLAB
In late June, XLab observed a variant that focused only on transforming infected devices into network proxies, and completely discarded the DDoS functionality.
The malware abuses UPnP (Universal Plug and Play) on the compromised device to create 155 port forwarding rules to expose internal services to inbound internet connections.
XLab’s report notes that the botnet spreads through weak Telnet and SSH credentials and known vulnerabilities in routers, cameras, and various IoT devices.
Among the more recent flaws exploited are CVE-2025-55182 (“React2Shell”), CVE-2025-34152, CVE-2025-28137 (Totolink), and CVE-2025-9528 (Linksys). However, Dysphoria also targets older weaknesses that still persist in many devices, like CVE-2017-17215 (Huawei) and CVE-2020-8515 (DrayTek).
XLab monitored the botnet between July 14 and 20 and recorded a peak of 740,000 daily pings from infected hosts, 239,000 connections from overseas clients, and 1,800 from China.
The researchers confidently estimate that the number of infected devices is around 200,000 at this time.
Concerning the botnet’s firepower, its operators claim a maximum DDoS capacity of 4 Tbps on their clearnet site, which promotes the service as a legitimate stress-tester.
.jpg)
Source: BleepingComputer
Despite being significantly lower than the current record figure of 31.4 Tbps achieved by the Aisuru/Kimwolf botnet in December 2025, it is still enough to cause notable disruptions.
Users can protect against botnet infections by keeping their devices’ firmware up to date, changing the default administrator password, disabling remote access if not necessary, and strengthening the security settings where available/possible.
Security teams log 54% of successful attacks and alert on just 14%. The rest move through your environment unseen.
The Picus whitepaper shows how breach and attack simulation tests your SIEM and EDR rules so threats stop slipping by detection.
We may receive a commission on purchases made from links.
There have been many great sales this July from a range of online retailers. But you don’t always want to pick and choose deals from a dozen different retailers across the internet and pay all those separate shipping costs when you’re doing your shopping. Sometimes it’s nice to just pop into your local big box store and get all your shopping done in one place. There have been many tools with deep discounts at Lowe’s in July, but those who prefer the orange warehouse will be pleased to learn that there are still plenty of great deals at Home Depot even as we enter the final week of July.
Those who collect power tools know that they can be pricey, and so shopping these sales is a great way to expand your collection without breaking the bank. Many of the products that have been marked down are big-ticket items from some of the best major power tool brands on the market. What’s more, these end-of-month discounts don’t just consist of tiny 10-20% off deals. There are still a handful of power tools and kits you can get at nearly half (or more) off their MSRP. With that in mind, it’s definitely worth taking a look at some of Home Depot’s current deep discounts to see if any of them might make a good addition to your collection.
DeWalt Atomic 20V Max Cordless 4 ½-inch Angle Grinder Kit
There have been quite a few DeWalt tools with deep discounts in July, but one that’s still available at Home Depot is the DeWalt Atomic 20V Max Cordless 4 ½-inch Angle Grinder. A good angle grinder is a great addition to any collection, and fans of the black-and-yellow tool brand will be pleased to know this is a good one. This tool usually costs $528.00, but Home Depot currently has it marked down by 62%, making it available for just $199.00.
This angle grinder has a brushless motor, like other tools in DeWalt’s Atomic product line. That means that it offers more power than a brushed design while prolonging battery life and improving overall longevity. It maxes out at 760 MWO and reaches rotational speeds of up to 11,000 RPM when not under load. It comes with DeWalt’s proprietary Anti-Rotation System, which quickly stops the wheel whenever the tool senses a pinch, stall, or bind-up event. This helps the user maintain control and reduces reactionary torque.
It has a spindle lock system for easy wheel changes, a paddle switch with a lock-off paddle and no-lock-on feature for optional control, a forward exhaust system, and a type-b clip-on guard. The kit you’re buying here includes a 20V Max 5.0Ah battery, a 20v Max 4.0Ah battery, and a charger. This particular kit currently doesn’t have any ratings on the Home Depot site, but the DCG402B grinder included included in the kit currently has a 4.7 out of five-star rating as a standalone tool, albeit from only 24 ratings.
Ridgid 18V Nuke SubCompact Brushless Cordless Multi-Tool Kit
Another great buy comes from one of Home Depot’s affiliated brands, Ridgid. The company is currently selling the Ridgid 18V Nuke SubCompact Brushless Cordless Multi-Tool Kit at a steep discount. This is one of those tools you may think you can get by without, until you own one and find yourself using it on just about every project. The kit typically costs $278.00, but Home Depot has it on sale for just $149.00, a 46% discount.
The brushless motor in this Ridgid allows it to deliver up to 20,000 oscillations per minute, controllable via a variable-speed trigger and three-speed selector. Ridgid promises that this delivers 45% faster cutting and 70% less vibration than previous models. It has a 4-degree oscillation angle, a lock-on button, a tool-free accessory change system, an LED worklight, and a cushioned ergonomic grip. The kit comes with a 18V Max 4.0Ah battery, a sanding pad, sandpaper, and a plunge cut blade.
This kit has a 4.8 out of five-star rating on Home Depot’s website, with 73% of customers stating that they would recommend it. The consensus is that the tool is lightweight, versatile, and easy to use. Others have also commented that they liked the toolless blade-changing feature and appreciate Ridgid’s warranty. The few complaints that it has received were more about the fact that the kit only included a single battery than anything to do with the tool itself
Milwaukee M18 Cordless Rocket Dual Power Light Kit
Milwaukee is one of the biggest power tool brands on the market today, and one of the biggest reasons for the company’s success is likely its absolutely massive product range. The Milwaukee M18 Cordless Rocket Dual Power Light Kit, for instance, is an impressive set that would usually run $589.00, but that you can currently get at a 49% markdown for $299.00.
Milwaukee claims that this light will produce up to 2,500 lumens of what it calls “Trueview High Definition” light at full brightness, a 25% increase over past models. It also has power-saving low and medium modes that emit 700 and 1,100 lumens, respectively. It can run on either M18 batteries or regular AC corded power. Its head can extend from four to seven feet in height, rotate 230 degrees vertically, and pivot 240 degrees horizontally. It also has impact-resistant legs and head. The kit comes with two Milwaukee Redlithium XC6.0Ah batteries and an M18 and M12 Dual Charger.
This set has a 4.8 out of five-star rating on the Home Depot site from over 2,300 ratings and a 91% recommendation rate from previous buyers. Most praise the power and longevity, while adding that it’s versatile and easy to use. Some have noted that the included batteries are a bit heavy, but this isn’t really a mark against the light itself.
Ryobi One+ 18V HP Brushless Brad Nailer Kit
Given that it’s Home Depot’s primary affiliated power tool brand, you’ll often see a Ryobi tool or two on sale during the retailer’s discount periods. One such discounted Ryobi product you might want to consider is the Ryobi One+ 18V HP Brushless Brad Nailer Kit. This is a great option for anyone who needs to fire off a few brad nails, but doesn’t want to deal with dragging an air compressor around. This kit usually costs $398.00, but is currently marked down by 55%, meaning you can get it at your local Home Depot for $179.00.
As the name implies, this is an 18-gauge nailer that can shoot fasteners between ⅝-inch and 2 ⅛-inches long. Extra features include fastener depth control, high and low-power settings, a low nail indicator, a no-mar tip, dry-fire lockout, a selectable trigger, and a comfort grip. In addition to the tool, you also get two Ryobi 18V 4.0Ah batteries, a 2.0Ah battery, and a charger.
The kit has a 4.6 out of 5-star rating on the Home Depot website from over 1,900 responses, with 61% of buyers stating that they would recommend it. Customers generally like the tool’s lightweight construction and overall performance, though some have noted that the nailer occasionally misfires and that it might benefit from larger-capacity batteries than those included in the kit.
AI AND ML
Beijing happy to ‘take all necessary measures’ if sanctioned
China’s government has vowed to “take all necessary measures” if the US government imposes new sanctions on AI companies.
That threat came on Monday at a media Q&A staged by China’s Ministry of Commerce, during which local reporters asked about allegations that Chinese AI companies have distilled leading American AI models. The source of those allegations was Donald Trump’s Assistant for Science and Technology, Michael Kratsios, whose stance was backed by US Treasury Secretary Scott Bessent.
China always denies that its military, intelligence services, and private industry steal any information or technology, and characterizes allegations of theft as propaganda intended to discredit the nation.
The Ministry’s response to the Trump administration’s allegations re-uses those arguments. It then suggests that Chinese AI companies didn’t have enough time to distill the latest frontier models, because the US companies that developed them released them mere days before Chinese companies published their own code.
Beijing also asserts “some Chinese models are already in a leading position” and that allegations of distillation are therefore unfounded.
Which leaves China arguing that its AI companies are good, but not so good they can quickly distill frontier models and re-release them with Chinese characteristics.
The Ministry then throws out its own allegation: “It is understood that many American AI companies have distilled Chinese models in their research and training.”
The allegation is plausible but not necessarily a sign that US companies are abusing intellectual property. That argument comes from the Trump administration’s Kratsios, who last week argued that AI distillation can be a legitimate technique when “used to create smaller, more efficient models.”
American model-makers could therefore distill hundreds of Chinese open source models without behaving badly.
The Ministry’s post doesn’t specify how China’s government might respond to sanctions but ends with a call for the US to “jointly promote the positive development of artificial intelligence, and benefit both countries and the world by advancing and improving AI governance.”
That’s a reference to the World Artificial Intelligence Cooperation Organization (WAICO), a 29-member organization that China recently convened to promote AI governance and deployment. China has also called for AI models to be open sourced, to advance innovation and in a spirit of cooperation.
The China/US AI spat is taking place at the same time that stateside debate about AI regulation heated up after 77 technology companies signed an open letter calling on US lawmakers to support open weights models.
China and a big section of the tech industry are therefore on the same side on at least one of the many issues AI raises. ®
Tech
Seattle startup Replify acquired by ABC Fitness to bring agentic AI to more gyms and wellness centers
Replify, a Seattle startup that uses agentic AI to help fitness operators automate member and prospect communications, is being acquired by Dallas-based ABC Fitness, the companies announced Monday.
Replify’s software handles phone calls, emails, chats, and texts for health and wellness businesses, including inbound customer messages as well as proactive outbound marketing.
The idea is to help gyms, recreational facilities, tanning salons, and other businesses improve customer service and free up staff to focus on other tasks.
ABC Fitness is a technology provider for fitness businesses with a global customer base of more than 30,000 businesses and 40 million members. It already shares customers with Replify, including Gold’s Gym, UFC Gym, and Club 24.
Replify’s platform supports approximately 35 languages across voice, and more than 100 across text and chat. ABC Fitness’ software is used in more than 100 countries.
Replify was founded in 2023 as heyLibby by CEO Tony Small and CTO Anna Rodriguez. Zillow co-founder and former CEO Spencer Rascoff, who worked with Small and Rodriguez at the Seattle real estate company, joined as co-founder, investor and advisor. He incubated the startup out of his Los Angeles-based firm 75 & Sunny Labs.
Replify raised $4.5 million in an April 2025 seed round led by French firm Aglae Ventures and Silicon Valley-based Vertical Venture Partners. The company raised $6.7 million total in three years.
“Replify was built to help fitness operators be present at every moment a prospect or member is ready to engage,” Small said in a statement. “By joining ABC Fitness, we can bring our AI agents to a larger global ecosystem and help more operators capture demand, support their teams and grow with less manual work.”
Small and Rodriguez and the 12-member Replify team are joining ABC Fitness, which employs nearly 2,000 people, according to its website. Small will be senior VP of AI strategy and Rodriguez will be VP of engineering, with both reporting to ABC Fitness President Khal Rai.
The goal for the Replify team is to lead the advancement of the agentic layer of ABC’s Intelligent Operating System and continue innovation in agentic AI capabilities, Rodriguez told GeekWire.
Terms of the deal were not released.
Joseph Crawford of the University of Tasmania and Michael Cowling of RMIT University discuss the dangers of becoming too emotionally dependent on advanced technologies.
Since November 2022, generative artificial intelligence (AI) has been rewriting billions of emails, student assignments, reports and break-up text messages. Alongside these mundane uses, we’ve seen a proliferation of chatbots as AI “companions”.
Users can design and clothe (or unclothe) their very own AI friend, often for a fee. These social chatbots provide “happy conversations” and a seemingly perfect relationship at the cost of the mutual vulnerability and genuine sense of belonging we gain from bonds with other humans.
Proponents argue that for those experiencing social disconnection, chatbots are infinitely available, supportive companions who don’t judge them. And there’s some evidence chatbots can alleviate symptoms of loneliness, chronic disconnection and thwarted belonging.
Australia’s eSafety Commissioner acknowledges this: “AI companions are always available – which can be appealing for those young people who struggle to build face-to-face relationships.”
But the risks of replacing human relationships with chatbots are only starting to be understood.
A study we conducted in 2023 showed university students using early chatbots for academic support copped unintended consequences, such as loneliness. Currently, the risks of social chatbots – such as dependency, displacing human friendships, withdrawing socially or building unrealistic relationships – appear to outweigh the benefits.
In recent weeks, China has put into place new rules for AI companions and chatbots, or “anthropomorphic interactive services” as they’re called in the legislation. Alongside ensuring chatbots must guard state secrets, emotional use of these tools is restricted, and expected to follow social and moral standards.
These are some of the strongest controls of social AI use introduced anywhere in the world. So what can we learn?
China’s social AI regulation
Material harms from companion AI use do occur, including in China. An 18-year-old spent 7,000 yuan (A$1,400) on customised jewellery for her AI boyfriend in their four months of “dating”.
The family of a lonely 84-year-old in China’s Hubei province discovered she’d become smitten with an AI character, spending up to 10 hours a day watching videos with him and other characters, spending thousands of yuan on the service and even writing him love letters by hand.
China’s new rules establish explicit provisions for how they expect companion chatbots to interact with humans.
The measures expect social AI bot developers to assure content does not:
- threaten national security or national honour
- violate core socialist values
- encourage self-harm or suicide
- excessively cater to emotional dependence or addiction
- provide virtual ‘partners’ or ‘relatives’ to minors
- serve unsuitable content to minors.
What’s more, users who seem overly reliant on the service must receive prominent reminders they’re speaking to a chatbot. And AI companies are required to intervene if users appear to be in extreme distress.
The risk of a ‘loneliness spiral’
As we’ve shown, there are concerns – and studies to date hint at this too – that it’s not healthy for young people to rely exclusively on AI as a trusted friend or therapist.
Lonely people experiencing social anxiety can engage in problematic use of conversational AI to alleviate feelings of loneliness and negative rumination.
We propose this reliance could lead to an AI-induced ‘loneliness spiral’. When individuals feel lonely, they’re more sensitive to feelings of social threat and disruptive emotional regulation.
So, they turn to a low-risk AI ‘friend’ for support, instead of qualified or friendly humans. However, this often doesn’t fix the initial problem of loneliness, since chatbots can actually exacerbate it.
The restrictions China has put in place for AI companions can help to break this cycle and re-prioritise human connection. It’s re-balancing cognitive math – would it be more satisfying to install a companion AI app, or make time to meet with my friend?
Lessons for Australia
Loneliness and a low sense of belonging remain major challenges in Australia, with at least one in six experiencing loneliness, with some evidence suggesting higher rates.
While China has cracked down on AI companions, Australia has been leading the charge on young people’s use of social media. eSafety has also developed codes for restricting age-related material online such as pornography, high-impact violence, self-harm, suicide and disordered eating. But they don’t address social harms of AI companions, such as emotional dependency or displacing human connection.
Prime Minister Anthony Albanese also didn’t mention social harms from AI chatbots in his major speech on AI last week.
We propose that Australia’s age-restricted material protections should extend to unintended social harm of conversations with social, analytical and functional AIs.
The Australian government needs to explore how these virtual companions interact with Australians. And we must prepare to mitigate unintended social harms before these synthetic social connections become widespread and normalised.
Australia must prioritise developing social connectedness – in workplaces, productivity strategies, education curriculum and in the design of our communities.
An authoritarian crackdown on chatbots may not be within reach for a democratic nation. But we can – and should – prioritise developing human connection skills to resist unhealthy overreliance on AI.
And Australia should leverage regulatory protections to mitigate social harms, extending on the work eSafety is already doing with social media.
Joseph Crawford and Michael Cowling
Joseph Crawford is an award-winning management, leadership and higher education scholar based in the Office of the Deputy Vice Chancellor for Education at the University of Tasmania. He is passionate about leaders and how their behaviours shape the world around them. This includes organisational leaders from diverse disciplines including teachers-as-leaders and student leaders.
Prof Michael Cowling is an award-winning technology educator and communicator with a keen interest in mixed reality education, computer science education and information technology in society. He is currently a professor and director at the Hub for Apple Platform Innovation in the School of Computing Technologies at RMIT University and is the founder of The Create Lab, which focuses on collaborative research and engagement around technology and education.
Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.
Today’s Strands puzzle is a little tricky. Once you recognize the theme, you realize many words can fit as clues. Plus, some of the answers are long and could be difficult to unscramble. If you need hints and answers, read on.
Hint for today’s Strands puzzle
Today’s Strands theme is: Leave nothing out.
If that doesn’t help you, here’s a clue: Don’t do anything halfway
Clue words to unlock in-game hints
Your goal is to find hidden words that fit the puzzle’s theme. If you’re stuck, find any words you can. Every time you find three words of four letters or more, Strands will reveal one of the theme words. These are the words I used to get those hints, but any words of four or more letters that you find will work:
- PELT, STEP, PETS, DILL, SALE, HOLE, COMP, TIRE, HERE
Answers for today’s Strands puzzle
These are the answers that tie into the theme. The goal of the puzzle is to find them all, including the spangram, a theme word that reaches from one side of the puzzle to the other. When you have all of them (I originally thought there were always eight, but learned that the number can vary), every letter on the board will be used. Here are the nonspangram answers:
- WHOLE, COMPLETE, ENTIRE, FULL, TOTAL, UNDIVIDED
Today’s Strands spangram
Today’s Strands spangram is ITSALLTHERE. To find it, start with the I that’s four letters down on the far-left vertical row, and wind over and back.
Get CNET’s top-rated VPN for privacy and usability
Today’s NYT Connections: Sports Edition puzzle is a pretty tough one. That purple group lives up to its reputation as being almost impossible to solve. If you’re struggling with the puzzle but still want to solve it, read on for hints and the answers.
Hints for today’s Connections: Sports Edition groups
Yellow group hint: NFL roles.
Green group hint: Get your racket.
Blue group hint: More than one point.
Purple group hint: Look at how they end.
Answers for today’s Connections: Sports Edition groups
Yellow group: Football positions.
Green group: Tennis shot descriptors.
Blue group: Worth two points/runs.
Purple group: Ends in a number.
What are today’s Connections: Sports Edition answers?
The yellow words in today’s Connections
The theme is football positions.
The four answers are guard, linebacker, running back and tight end.
The green words in today’s Connections
The theme is tennis shot descriptors.
The four answers are backhand, drop, slice and smash.
The blue words in today’s Connections
The theme is worth two points/runs.
The four answers are 2-run HR, layup, safety and wrestling reversal.
The purple words in today’s Connections
The theme is ends in a number.
The four answers are Conine (nine), end zone (one), heavyweight (eight) and Witten (ten).
Rhino Entertainment has been busy digging down into its archives of the legendary Atlantic Records label, restoring many classic recordings to their audiophile best via its Rhino High Fidelity premium reissue series. Just out is a wonderful upgrade of Dusty Springfield’s iconic 1969 album, Dusty in Memphis.
Dusty in Memphis is widely regarded as one of the greatest recordings in pop music history. A stroke of production genius, the decision to bring the acclaimed British pop singer to Memphis for a recording session that blended her pop prowess with American Southern soul resulted in a timeless album that has since been inducted into both the GRAMMY Hall of Fame and the National Recording Registry.
Related Reviews:
Official materials from Rhino confirm that the new reissue was “cut from the original master tapes by Kevin Gray and pressed on 180-gram black vinyl at Optimal in Germany. These releases feature glossy gatefold packaging with ‘tip-on’ jackets and newly written liner notes. They are limited to 5,000 individually numbered copies and available today exclusively at Rhino.com and select Warner Music Group stores internationally.”
Dusty in Memphis is available from Rhino’s website for $39.98.
Surprisingly, Dusty in Memphis did not sell particularly well upon its initial release, stalling at No. 99 on the Billboard 200, despite containing Dusty’s spectacular version of “Son of a Preacher Man,” which was a Top 10 hit single in both the U.S. and U.K. at the time.
Those who did buy the Dusty in Memphis LP back in the day tended to love it, so it can be hard to find original editions in good condition. I know this because it has taken me ages to find one out in the “wilds” of collecting—garage sales, thrift shops, and flea markets!
For those who are not the crate-digging type, obtaining a nice copy on the collectors’ marketplace can be a challenge, at least for the wallet. For example, the five “Near Mint” copies listed on the online music marketplace Discogs at the time of this writing range in price from $45 to $175. So there is some real appeal to a high-quality reissue.
That said, after a reference listen to my 1969-era “Monarch” pressing—considered by many collectors and audiophiles to be among the best-made vinyl records of its day—I found the listening experience offered by the new Rhino High Fidelity edition to be far superior. It sounds more open and far less compressed, offering a wider soundstage, crisp highs, and fuller, more distinct lows.
Most importantly, it sounds the way Dusty in Memphis should sound, which is the bottom line for many fans. At times, it feels as though we are hearing more of that master recording for the first time.
Again, you can order Dusty in Memphis directly from Rhino for $39.98. It’s a limited run, so get one while you can.
Our Ratings
★★★★★★★★★★ Music
★★★★★★★★★★ Sound Quality
★★★★★★★★★★ Pressing Quality
Where to buy:
Mark Smotroff is a deep music enthusiast / collector who has also worked in entertainment oriented marketing communications for decades supporting the likes of DTS, Sega and many others. He reviews vinyl for Analog Planet and has written for Audiophile Review, Sound+Vision, Mix, EQ, etc. You can learn more about him a LinkedIn.
Related Reading:
More Information
With today’s emerging threats, traditional radar and electronic warfare (EW) systems that rely on static threat libraries face a critical vulnerability: mode-agile emitters operating in non-traditional modes that cannot be matched against predefined databases. A cognitive RF system addresses this challenge through artificial intelligence and machine learning techniques, enabling autonomous perception, reasoning, and response to unknown threats in the RF spectrum. This white paper reviews the architecture of cognitive AI/ML radar and EW systems, including key functional blocks such as RF acquisition, AI-driven analysis and inferencing, waveform synthesis, and RF generation. It also examines the challenges of training these systems — from acquiring real-world and simulated signal datasets to performing hardware-in-the-loop (HIL) and system-in-the-loop (SIL) testing — and describes how closed-loop testbeds can iteratively develop, validate, and improve the AI/ML algorithms needed to counter unknown threats.
Apple released new updates for macOS Sequoia and macOS Sonoma, extending security and maintenance support to Macs that haven’t moved to macOS Tahoe.
The updates are available through Software Update on supported Macs. Apple hasn’t identified any major new consumer features, which points to releases focused on security, stability, performance, and compatibility.
Users can install the updates by opening System Settings, selecting General, and choosing Software Update. A Mac will only offer the update that applies to its currently installed operating system.
The new releases give Mac owners another reason to stay current even when they aren’t ready or able to install macOS Tahoe. Some Macs can’t run Tahoe, while businesses and other users may remain on an older version because of software, hardware, or management requirements.
Apple has historically maintained the current version of macOS alongside two earlier releases. The company doesn’t promise a fixed support period, however, and older versions generally receive security and compatibility fixes rather than new features.
Updates for macOS Sequoia and macOS Sonoma keep older Macs secure and compatible while Apple puts most new features into macOS Tahoe and macOS 27 Golden Gate.
Apple introduced macOS 27 at WWDC on June 8 and released the first developer beta later that day. The company followed with the first public beta on July 13.
Security details may follow
Apple hasn’t posted complete security documents for the new Sequoia and Sonoma updates. The company often publishes or expands those documents after an operating system update becomes available.
The previous updates, macOS Sequoia 15.7.7 and macOS Sonoma 14.8.7, arrived on May 11 with security fixes for both operating systems. Apple also released Safari 26.5.2 on June 29 for Sequoia and Sonoma.
Safari 26.5.2 fixed WebKit and web extension vulnerabilities that could expose sensitive information, move data across website boundaries, escape web-content restrictions, or crash Safari and related processes.
The separate Safari update showed why older macOS versions still need active maintenance. A Mac doesn’t have to run Apple’s newest operating system to face the same browser and WebKit threats.
Most users running macOS Sequoia or macOS Sonoma should install the applicable update. People who depend on specialized software, drivers, security tools, or managed enterprise systems may want to confirm compatibility before updating.
NewsBeat1 minute ago
Bridget Phillipson appointed Labour Party chair
Business2 minutes ago
Govt spruiks more planning reforms
Crypto World3 minutes ago
Strategy Raises Cash Reserve to $3.75B and Starts STRC Stock Buyback
-
Fashion3 days agoWeekend Open Thread: Brooks Brothers
-
Crypto World7 days agoGrayscale Files For Worldcoin ETF, WLD Registers Sharp Rise
-
NewsBeat6 days agoHow a former Blue Peter presenter stunned America’s Got Talent judges
-
Tech1 day agoIntel is reversing course and bringing hyper-threading back to its server chips
-
Business6 days agoNew Jersey voter registration controversy explained: How 6,600 noncitizens got on the rolls, and what happens next
-
Entertainment6 days agoJohnny Depp’s R-Rated Gothic Cult Classic Gets New Release Ahead of Sydney Sweeney Remake
-
Crypto World5 days agoEthics, other provisions in crypto Clarity Act to be further discussed
-
Politics16 hours agoLuke Littler dismantles Gerwyn Price to retain title in Blackpool
-
Sports4 days ago2026 3M Open leaderboard: Scottie Scheffler finds putter in Round 1, sits three back
-
Sports1 day agoCommonwealth Games boxing: Jadumani Singh seals dominant 5-0 win over Pakistan’s Sumama Rehman to enter quarter-finals | Commonwealth Games News
-
Fashion4 days ago16 Dresses for the High Summer Event
-
News Videos4 days agoThe Peugeot Family: How 200 Years of an “Old Money” Dynasty Died in A Boardroom
-
Politics2 days agoSpain sweeps the board at 2026 World Cup with individual awards
-
Entertainment4 days agoA New Post-Apocalyptic Gundam Anime Series Blasts Into SDCC
-
News Videos1 day agoBITCOIN JUST ENTERED THIS CRITICAL ZONE…
-
Crypto World2 days agoXRP Ledger adds $2.6B as RWA inflows rank second
-
NewsBeat7 days agoNADINE DORRIES: I have witnessed first-hand what happens to new Prime Ministers when they enter No 10… and this is why Andy Burnham will be out by May
-
Crypto World5 days agoUniswap (UNI) pushes deeper into tokenized RWAs with permissioned trading pools
-
Crypto World6 days agoSablier Labs Enters Maintenance Mode, Halts Development
-
Crypto World5 days ago
SEC Agrees to Overhaul Recordkeeping After Settling Coinbase Lawsuit Over Gensler’s Lost Texts
You must be logged in to post a comment Login