Connect with us

Technology

Canoo hit with two supplier lawsuits as last remaining co-founder leaves

Published

on

Canoo hit with two supplier lawsuits as last remaining co-founder leaves

EV startup Canoo has been hit with two new lawsuits from suppliers linked to the drivetrains that power its electric vehicles, just weeks after the company kicked off a major reorganization that included the departure of its chief technology officer.

Canoo has also parted ways with senior director of advanced vehicle engineering Christoph Kuttner, who was the last remaining co-founder from the team of nine that created the startup in late 2017, TechCrunch has learned.

Kuttner was one of nine co-founders who split off from Faraday Future at the end of 2017 to start up Evelozcity, the original incarnation of Canoo. Those co-founders have steadily slipped away from the company before, during, and after its transition from a private startup to a publicly traded company in late 2020 when it merged with a special purpose acquisition company.

Kuttner and Canoo did not immediately respond to requests for comment.

Advertisement

The supplier lawsuits, both of which were filed in September with Oakland County Circuit Court in Michigan, come at a time when Canoo is moving away from its original California headquarters and focusing increasingly on its operations in Texas and Oklahoma, and while courting potential customers in the U.K. and Middle East. It’s doing all of this on a tight budget. The company reported just a little more than $19 million in total cash, of which $4.5 million was unrestricted, as of June 30, 2024.

The two firms suing Canoo are Jing-Jin Electric North America and Dana Limited. Canoo had tapped Jing-Jin, or JJE, to design and build electric motors for the EV startup’s vehicles. JJE claims Canoo failed to pay for the motors and owed more than $1.4 million as of August 2023. The supplier alleges Canoo didn’t dispute the money owed and then “strung JJE along for months — repeatedly promising to pay JJE, blaming its delay on issues and factors wholly unrelated to JJE.”

In November 2023, according to the complaint, JJE and Canoo entered into a repayment plan to set things right. JJE says Canoo made its first three payments, totaling $851,013, and an additional payment of $120,649.23. But JJE says the payments stopped soon after, despite Canoo owing another $446,692.77. JJE suspended all work for Canoo in June 2024 and says the EV startup stopped responding.

Dana Limited, meanwhile, says it entered an agreement with Canoo in February 2022 to co-design and develop a drive assembly for Canoo’s vehicles. Dana Limited says that as part of the agreement, Canoo was required to compensate the supplier for any costs incurred if the EV startup’s vehicle production was delayed by more than three months.

Advertisement

“Canoo’s production and work under the Agreement was significantly delayed,” Dana Limited writes in the complaint. The supplier now alleges Canoo failed to make two $4.3 million cost recovery payments despite sending “several notices” to the EV startup through late 2023 and into 2024.

Source link

Continue Reading
Advertisement
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Servers computers

Supermicro’s H13 GPU Systems ft. @LinusTechTips

Published

on

Supermicro’s H13 GPU Systems ft. @LinusTechTips



Linus goes face to face with the 8U uGPU system featuring 8x NVIDIA H100 GPUs, and the flexible 4U GPU systems offering maximum acceleration to tackle the most intensive HPC, AI, ML applications out there.

Supermicro H13 Website: https://www.supermicro.com/en/products/aplus
H13 Jumpstart Program: https://www.supermicro.com/jumpstart/h13
AMD EPYC™ Website: https://www.amd.com/en/processors/epyc-server-cpu-family

Learn more
Supermicro H13 Website: https://www.supermicro.com/en/products/aplus
H13 Jumpstart Program: https://www.supermicro.com/jumpstart/h13
AMD EPYC™ Website: https://www.amd.com/en/processors/epyc-server-cpu-family

Subscribe to Supermicro
Newsletter: https://www.supermicro.com/en/news/newsletter-sign-up
YouTube: http://bit.ly/2eIqOCu

Advertisement

Follow Supermicro
LinkedIn: https://www.linkedin.com/company/supermicro
Twitter: https://twitter.com/Supermicro_SMCI
Facebook: https://www.facebook.com/Supermicro
Instagram: https://www.instagram.com/supermicro_SMCI

source

Continue Reading

Technology

Tech Life: Mapping a changing world

Published

on

Tech Life: Mapping a changing world

How live updating of online maps is helping humanitarian work around the world.

Source link

Continue Reading

Technology

Artificial flavours released by cooking aim to improve lab-grown meat

Published

on

Artificial flavours released by cooking aim to improve lab-grown meat

Cultured meat, with added flavour

Yonsei University

Lab-grown meat could get a flavour boost thanks to aromatic chemicals that activate when cooked, releasing a meaty smell – or if you prefer, that of coffee or potatoes.

Meat grown from cultured cells can already be created in various forms that resemble slaughtered meat, including steak and meatballs, but matching the taste has proven more challenging. Traditional meat flavours are extremely complex and volatile and don’t survive the lengthy laboratory process.

Advertisement

One key component of the taste of cooked meat is the Maillard reaction, named after a French chemist who discovered that unique flavours are created in cooked food at between 140 and 165°C (280 to 330 °F). Jinkee Hong at Yonsei University in Seoul, South Korea, and his colleagues say they have worked out a way to simulate the Maillard reaction by adding “switchable flavour compounds” (SFCs) into a 3D gelatine-based hydrogel, called a scaffold, that remain stable while the meat is cultured.

Once heated to 150°C, the chemicals “switch on” and release their flavours, improving the cultured protein’s palatability. “We actually smelled the meaty flavour upon heating the SFCs,” says Hong, though he wouldn’t confirm whether the team had actually eaten the meat.

These SFCs can also be used to create different flavour profiles. For example, the researchers tested three compounds and say they produced flavours simulating roasted meat, coffee, roasted nuts, onions and potatoes. “We can diversify and customise the flavour compounds released from the SFC,” says Hong.

Advertisement

One big issue is that the chemicals involved aren’t currently seen as safe for human consumption. “Because the materials and culture medium are not approved as edible materials, we cannot ensure the safety of it,” Hong says. “However, we think that our strategy can also be applied to conventional edible materials, which would be safer than the materials used in this study.”

Johannes le Coutre at the University of New South Wales in Sydney, Australia, says he is sceptical of the work for numerous reasons, including that the flavour tests predominantly used an electronic nose to assess the chemicals being released, rather than human judgement of whether they smelled appetising.

“You cannot nourish human beings with this type of material,” says le Coutre. “While cell-based meat is a promising technology concept, this particular way of adding flavour will never provide safe and sustainable protein for low and middle-income communities that need food.”

Topics:

Advertisement

Source link

Continue Reading

Servers computers

Cara Merakit Rack Server 42U Perforated Door

Published

on

Cara Merakit Rack Server 42U Perforated Door



https://tokopedia.link/BOdpxiBQyib

WhatsApp wa/me8973379900

source

Continue Reading

Technology

GTA V for PlayStation 5 is only $20 today — normally $40

Published

on

GTA V for PlayStation 5 is only $20 today — normally $40


Best Buy has cut the price of Grand Theft Auto V by 50% and if you don’t already own it, you really need to buy it right now.

Source link

Continue Reading

Servers computers

Slimming down to 2U! SFF Rackmount Gaming PC

Published

on

Slimming down to 2U! SFF Rackmount Gaming PC



HUGE thanks to Micro Center for sponsoring this build! Here are links for their offer:

New Customer Exclusive – $25 Off ALL CPU’s: https://micro.center/yww
Shop Micro Center’s February BYO Deals: https://micro.center/fbi
Check out Micro Center’s Custom PC Builder: https://micro.center/b9o
Submit your build to Micro Center’s Build Showcase: https://micro.center/0jn

Parts used in this build (some links are affiliate links):

– MyElectronics’ 2U Mini ITX case: https://www.myelectronics.nl/us/19-inch-2u-mini-itx-case-short-depth.html
– Intel i5-13400 CPU: https://amzn.to/3K5bgJ1
– ASRock Z790M-ITX WiFi Motherboard: https://amzn.to/3YOnLwF
– CORSAIR Vengeance DDR5-5200 RAM with XMP: https://amzn.to/3lDqzi3
– LIAN LI SP 750 SFX PSU: https://amzn.to/3lGtUg4
– PNY Nvidia RTX A2000 12GB graphics card: https://amzn.to/3YobvmV
– be quiet! Pure Wings 80mm BL044 Case fans: https://amzn.to/3S23mCd
– Noctua NH-L9i-17xx Low-Profile CPU cooler: https://amzn.to/3EaWKMi
– 3.5mm Keystone Audio Jack: https://amzn.to/3YRPIUA
– Nanxudyj 3.5mm 1ft Audio Cable: https://amzn.to/3Ea26HD
– KIOXIA XG8 NVMe SSD: https://americas.kioxia.com/en-us/business/ssd/client-ssd/xg8.html

Advertisement

And here’s a link to the build from Micro Center (excluding the things I bought separate): https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=fe3f5ada-d5a2-4773-a2f3-28a25a21f8c5

Also mentioned in this video:

– LTT Personal Rig Update (Late 2021): https://www.youtube.com/watch?v=TgRXE9mUHJc
– LTT Heating my pool with computers: https://www.youtube.com/watch?v=4ozYlgOuYis
– It BROKE! LTT Screwdriver 6-month review: https://www.youtube.com/watch?v=uwoc6c4PMfU

Support me on Patreon: https://www.patreon.com/geerlingguy
Sponsor me on GitHub: https://github.com/sponsors/geerlingguy
Merch: https://redshirtjeff.com
2nd Channel: https://www.youtube.com/c/GeerlingEngineering

Advertisement

#Sponsored #MicroCenter #Homelab

Contents:

00:00 – Too much power?
00:48 – Short-depth 2U rackmount case
01:19 – Micro Center!
01:58 – SFF ask the expert
04:07 – Case closed… and opened!
05:08 – Assembling the motherboard
08:37 – I actually showed the thing!
09:00 – It’s coming together
10:35 – Front panel USB and a GPU to see
12:43 – It’s a lot heavier for its first boot
13:46 – No case is perfect
14:52 – Quieter AND faster!
15:34 – Gaming at 1080p
16:20 – Other SFF options and another build .

source

Advertisement
Continue Reading

Trending

Copyright © 2024 WordupNews.com