Connect with us

Servers computers

Home made wall mounted 19-inch server / data / equipment rack cabinet. Perfect for a home network!

Published

on

Home made wall mounted 19-inch server / data / equipment rack cabinet.  Perfect for a home network!



Rather than buying a pre-made wall mount server data cabinet I decided to build one myself, custom designing it to fit a standard 19-inch network switch, power strip, patch panel, NAS (Network Attached Storage) drive, wireless WiFi access point, fibre broadband modem and the Hive central heating panel.

The unit itself is easy to make out of timber, I show you how I made it from a simple kitchen wall cabinet but alter it to fit the rack perfectly. It looks good on the wall (it looks much nicer than a metal data rack cabinet) and can be altered in the future if I feel the need to expand the unit.

The costs for a pre-built metal unit of this size is around £135.00, this one I have built cost just £39.00 – that’s a huge saving!

Rack contents include (I am not sponsored):
– TP Link TL-SG1024 Unmanaged 24-port Gigabit Ethernet Switch – Amazon
– LMS Data 6-gang Horizontal Power Distribution Unit (PDU) – Amazon
– Western Digital (WD) MyCloud EX2 Ultra NAS server – Maplin (before they went bust!)
– BT Smart Hub 2 – Gigabit Router and WiFi Access Point with 802.11ac Wireless
– Hive HomeHub – Central Heating / Water Control Panel with Remote Access
– OpenReach – Fibre-to-the-home Modem with 900 mbps connection

Advertisement

Please subscribe to my channel to see the next video – installing 22 Cat-6 network points around the house. .

source

Continue Reading
Advertisement
26 Comments

26 Comments

  1. @keistian4752

    September 30, 2024 at 6:52 pm

    What are the measurements of the whole rack?

  2. @Jonbuildz

    September 30, 2024 at 6:52 pm

    Being a techy It's nice mate, visually looks great.

  3. @maxwarren2852

    September 30, 2024 at 6:52 pm

    This looks great. When do you think the sequel will come out?

  4. @pitsnipe5559

    September 30, 2024 at 6:52 pm

    Nice, just built something similar for my home network using scrap lumber from previous projects.

  5. @arf20

    September 30, 2024 at 6:52 pm

    I need a 1000mm deep rack
    Servers don't fit in such a short cabinet

  6. @chilson88

    September 30, 2024 at 6:52 pm

    Well done, Your accent kept my full attention

  7. @Trotter152

    September 30, 2024 at 6:52 pm

    Nice work, appreciating it here from Jersey, New Jersey, USA.

  8. @zl0y

    September 30, 2024 at 6:52 pm

    Wooden box! 🤦

  9. @georgelza

    September 30, 2024 at 6:52 pm

    do you have a link for the rack (the silver, into which you screw the components) rails.

  10. @sko3225

    September 30, 2024 at 6:52 pm

    @5:55 talking about back-heavy, screwing in top screw first, of course. Tip: screwing in bottom ones first will force the rack-ears to the rails and hold them instead of trying to sheer off, friction is your friend! So is the principle of lever.

    Rack looks really nice with the colour accents, thanks for sharing.

  11. @siva29701

    September 30, 2024 at 6:52 pm

    Super fiitting & your equipment 👌

  12. @stanbaldwin7993

    September 30, 2024 at 6:52 pm

    Great video. I was looking for an idea to make my media room rack. Thanks!

  13. @jean-sebastienfrenette5169

    September 30, 2024 at 6:52 pm

    The only thing missing is actually heat exhaust. You have just one or two switch so not the biggest heat output but I wouldn't do that with servers and big switch, need room for air in front and back

  14. @crestonsimpson1370

    September 30, 2024 at 6:52 pm

    I think I would have added some rack mount fans.

  15. @andygg65

    September 30, 2024 at 6:52 pm

    How did you fix the Hive Hub and and BT Hub to the red accent panel? My hubs do not have any slot mounts for screws.

  16. @lorenzopardini6769

    September 30, 2024 at 6:52 pm

    Very good job! Suggestion: add labels to cables and power supply units

  17. @makeamillion

    September 30, 2024 at 6:52 pm

    Damn, thought it was a server rack build but well done.

  18. @ifohancroft

    September 30, 2024 at 6:52 pm

    By the way, mill is not the same as a millimeter. 1 mill is 1/1000th of an inch.

  19. @joshuacao

    September 30, 2024 at 6:52 pm

    Came here because my wife won’t let me leave the server rack exposed in the living room

  20. @samrahimi7521

    September 30, 2024 at 6:52 pm

    😂😂😂😂 you did not save £85 .. you lost a lot of time doing this
    BUT look’s good

  21. @manysaints

    September 30, 2024 at 6:52 pm

    It was a little flimsier than I expected. I had to add a 2×2 piece of wood to the bottom on the rear side in order to stabilize it better https://www.youtube.com/post/UgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.

  22. @jamesinbradford5882

    September 30, 2024 at 6:52 pm

    I’ve from Bradford , ever year I go to Cumbria for a week. Has soon has I leave Keighley I’m in a different world. Then a week later driving through Keighley towards Bradford I’m back in driving hell !

  23. @summerbee80

    September 30, 2024 at 6:52 pm

    Can you do an update on your home server please

  24. @TheDwight1379

    September 30, 2024 at 6:52 pm

    Did you move the ONT, or did they install to that corner?

  25. @LiLBitsDK

    September 30, 2024 at 6:52 pm

    that's a GIGANTIC case… for ONE switch… must admit I actually expected "something" in the rack…yes yes there are the stuff on the shelf below but that obviously didn't need a rack.

  26. @skynetnetworks

    September 30, 2024 at 6:52 pm

    A hidden cable pip that can open and a patch panel and ethernet outlet for the equipment below the cabinet

You must be logged in to post a comment Login

Leave a Reply

Servers computers

Dell 42U Server & Networking Rack

Published

on

Dell 42U Server & Networking Rack

source

Continue Reading

Servers computers

The Lenovo ThinkSystem SR670 V2 is a GPU-rich 3U rack server that supports eight double-wide GPUs.

Published

on

The Lenovo ThinkSystem SR670 V2 is a GPU-rich 3U rack server that supports eight double-wide GPUs.

source

Continue Reading

Servers computers

Tủ rack, tủ mạng 20U D1000 chất lượng cao, giá rẻ thương hiệu SeArack.

Published

on

Tủ rack, tủ mạng 20U D1000 chất lượng cao, giá rẻ thương hiệu SeArack.



Thông số kỹ thuật:

* Kích thước: H.1060*W.600*D.1000mm.
* Hệ thống cửa đều có khoá an toàn, dễ dàng tháo lắp.
* Cửa trước đảm bảo tính thẩm mỹ và tạo độ thông thoáng cho các thiết bị trong tủ.
* Hệ thống bánh xe và chân tăng giúp dễ di chuyển cũng như cố định tủ.
* Bảo hành 12 tháng theo tiêu chuẩn nhà sản xuất.

Liên hệ hotline 0982626028 để được tư vấn và đặt hàng giá tốt nhất.
Wedsite: www.codienhanoi.vn hoặc www.searack.vn
#codienhanoivn #turack #tumang #turacksearack #tiktok #xuhuong #LearnOnTikTok #severrack #hethongmang

source

Continue Reading

Servers computers

Blade Server HS21 in the Lenovo/IBM BladeCenter H – 524

Published

on

Blade Server HS21 in the Lenovo/IBM BladeCenter H - 524



Looking at the Lenovo/IBM Blade Server HS21.
This server is available in to versions, and the better one of the two is the one that can use the Intel Xeon 5400 series.
I show both the 8853-C3G and 8852-L3G. Of these two, only the C3G can be upgraded to the Xeon 5400 series.

Link – IBM BladeServer HS21 8853 : http://amzn.to/2rnmWiI
Link – IBM BladeCenter H : http://amzn.to/2r6I6BM

Read All About it:
http://bladecenter.lenovofiles.com/help/topic/com.lenovo.bladecenter.hs21.doc/hs21_install_ug.pdf
_________________________________________________________________
http://www.patreon.com/myplayhouse
Even just 1$ a month, comes out to the same as Binge-watching all of my 500+ Videos every month.

My PlayHouse is a channel where i will show, what i am working on. I have this house, it is 168 Square Meters / 1808.3ft² and it is full, of half-finished projects.

Advertisement

I love working with heating, insulation, Servers, computers, Datacenter, green power, alternative energy, solar, wind and more. It all costs, but I’m trying to get the most out of my money, and my time. .

source

Continue Reading

Servers computers

Dell PowerEdge R640 1U Rack Server 80 Cores 512GB RAM Home Lab TrueNAS Unraid VMware ESXi

Published

on

Dell PowerEdge R640 1U Rack Server 80 Cores 512GB RAM Home Lab TrueNAS Unraid VMware ESXi



In this video, we provide a brief rundown of the DELL R640, along with instructions on how to set up and enhance its various components.

Our Listings:
https://newyork.craigslist.org/search/sss?query=rentyourlab.com/
https://www.facebook.com/marketplace/profile/100092225825225/

#education
#educational
#dell
#virtualization
#vmware
#budget
#esxi
#intel
#xeon
#gold
#6148
#Windows
#Server
#Hyper-V
#Linux
#UBUNTU
#Red Hat
#CentOS
#SUSE
#Debian
#AI
#Machine Learning
#CAD
#engineering
#Docker
#Kubernetes
#Kafka
#Power BI
#BigData
#analysis
#Proxmox
#Xen

source

Continue Reading

Servers computers

Home Lab Build – P.1 – Building a NAS

Published

on

Home Lab Build - P.1 - Building a NAS



My home lab journey.

Part 2: https://youtu.be/BVWmstt0AWM

Server rack:
StarTech.com 42U 19″ Open Frame Server Rack – 4 Post Adjustable Depth 22-40″ https://amzn.to/3NSeQ8B

Rails:
1U 19 inch Server Rack Rails: https://amzn.to/3OhHHD9

Advertisement

Switch:
10G 8 Port TP-Link switch: https://amzn.to/3NTRRKn

NAS Build:
Case: Rosewill 4U 12-bay hot swap server rack casing: https://amzn.to/3xks2fm
Motherboard: GIGABYTE Z590 AORUS Master: https://amzn.to/3tzCHlj
CPU: Intel® Core™ i5-11600K: https://amzn.to/3Of9W5f
RAM: Corsair Vengeance LPX 32GB: https://amzn.to/3NUJM80
Power Supply: Corsair RM850x: https://amzn.to/3xLYqJh
4x 18TB: Seagate Exos X18 18TB Enterprise HDD: https://amzn.to/3MKwM3H
3x 120mm Noctua fans: https://amzn.to/3QlXi6j
2x 80mm Noctua fans: https://amzn.to/3xOFb1w

Super quiet Puget Workstation build: https://hubs.ly/H0-By8Q0

PCIe SATA Expansion: https://amzn.to/3Odm9Yi

Advertisement

TrueNAS Core 12.0 install tutorial video I used: https://www.youtube.com/watch?v=nVRWpV2xyds

Neural Networks from Scratch book: https://nnfs.io
Channel membership: https://www.youtube.com/channel/UCfzlCWGWYyIQ0aLC5w48gBQ/join
Discord: https://discord.gg/sentdex
Reddit: https://www.reddit.com/r/sentdex/
Support the content: https://pythonprogramming.net/support-donate/
Twitter: https://twitter.com/sentdex
Instagram: https://instagram.com/sentdex
Facebook: https://www.facebook.com/pythonprogramming.net/
Twitch: https://www.twitch.tv/sentdex

Contents:
00:00 – Server rack types
00:30 – StarTech 42U 4 Post Open Frame Server Rack
01:15 – Network Area Storage (NAS)
02:42 – Prebuilt NAS Options (QNAP vs Synology)
03:36 – Custom-built rack-mount NAS
07:52 – Server rack Power Distribution Unit (PDU) (Tripplite PDU1230)
09:48 – Server Rack/Homelab networking (TP-Link TL-SX1008) 8x 10G
11:35 – StarTech 1U 19″ Server Rack Rails
12:21 – TrueNAS 13 w/ RAIDZ1
14:03 – Why HomeLab?

#homelab #server .

source

Advertisement
Continue Reading

Trending

Copyright © 2024 WordupNews.com