Connect with us

Servers computers

UNBOXING and ASSEMBLY – 4 Post Open Frame Server Rack Series | StarTech.com

Published

on

UNBOXING and ASSEMBLY - 4 Post Open Frame Server Rack Series | StarTech.com



Unboxing and Assembling the 4 Post Server Rack Open Frame Series:

8U 19″ Rack – 4POSTRACK8U: https://www.startech.com/en-us/server-management/4postrack8u
12U 19″ Rack – 4POSTRACK12U: https://www.startech.com/en-us/server-management/4postrack12u
15U 19″ Rack – 4POSTRACK15U: https://www.startech.com/en-us/server-management/4postrack15u
18U 19″ Rack – 4POSTRACK18U: https://www.startech.com/en-us/server-management/4postrack18u
25U 19″ Rack – 4POSTRACK25U: https://www.startech.com/en-us/server-management/4postrack25u
42U 19″ Rack – 4POSTRACK42: https://www.startech.com/en-us/server-management/4postrack42

source

Continue Reading
Advertisement
7 Comments

7 Comments

  1. @paulscott56

    September 29, 2024 at 3:03 am

    I'm loving this open frame rack so far! I'm almost finished putting it together, and it is solid and very well made. The instruction manual is remarkably clear, the only reason I watched this video was to check the wheel and levelling screws installation.

  2. @darthrainbows

    September 29, 2024 at 3:03 am

    This video really helped with getting the pieces in place in the right order. The instruction manual suggests that the top and bottom horizonal bars install between the left/right bars and the adujustable bars, when they should mount in front of the whole stack. Once that was cleared up, the rest of the assembly process went rather smoothly (except for the feet, see below).

    Helpful tips that I wish I knew ahead of time:

    * when installing the top horizontal bars, it helps to bolt the adjustable bar into the left/right bars though the bottom bolt hole before attaching the top horizontal bar through the top bolt hole – that will hold the adjustable bar to the left/right bar while you align the horizontal bar
    * the bolt holes for the adjustable feet have a plastic lip at the end (why???) that you have to thread through with the bolt as you screw the feet in; you'll need an adjustable wrench to apply enough torque to screw them in
    * if you are using both the levelling feet and the casters, screw in the levelling feet in first; otherwise the casters will get in the way of turning the wrench

  3. @AceBoy2099

    September 29, 2024 at 3:03 am

    Ok, I built mine just by looking at the schematic diagram, however, I'm looking for how to set the adjustable sections. Instructions say "for x use index numbers y and z" but how do I reference them to get the desired setting? There's no marks to indicate a referance point to use the indexed numbers.

  4. @clsanchez77

    September 29, 2024 at 3:03 am

    2:40, no do not use pliers. Always use the correct tool, otherwise you will round out your nuts.

  5. @Scythe42

    September 29, 2024 at 3:03 am

    Fs vertical cable mansgement

  6. @RokeJulianLockhart.s13ouq

    September 29, 2024 at 3:03 am

    How does one install the plastic hooks??

  7. @rodioleary

    September 29, 2024 at 3:03 am

    One of the wheel bolts is a real challenge to get in as it’s partially blocked underneath by a bolt on the adjustable rail. I removed the bolts on the rail to allow for some movement and was able to get the bolt in eventually.

You must be logged in to post a comment Login

Leave a Reply

Servers computers

APC AR3100 SERVER RACK – 42U SX DATA CENTER ENCLOSURE

Published

on

APC AR3100 SERVER RACK - 42U SX DATA CENTER ENCLOSURE



APC AR3100 Server Rack. 42U data center enclosure.
Toll Free: 877-307-7225
Web: www.global1resources.com
Ebay Store: global1resources .

source

Continue Reading

Servers computers

Open Frame Server Rack | MI-7633 (Features)

Published

on

Open Frame Server Rack | MI-7633 (Features)



Our website: https://bit.ly/3rbH0m2
Also available on Amazon: https://amzn.to/35jknUs
And your other favorite vendors like, Walmart, Wayfair, etc!
———————————————————————————————————————————————————-
Servers, Mini PC’s, AV Equipment, Stereos, Routers, Modems & More: The Mount-It! portable server rack is versatile enough to be used as an AV rack (AV cabinet), small server rack or a classic networking rack.
———————————————————————————————————————————————————-
Follow us on:
Facebook: https://www.facebook.com/shopmountit
Instagram: https://www.instagram.com/mount_it_/
Visit our Website at: https://www.mount-it.com for more ergonomic solutions.
—————————————————————————————————————————————————– .

source

Continue Reading

Servers computers

Bolein 27U 600mm*800mm Floor Standing Network Server Rack Cabinets (Glass Door)

Published

on

Bolein 27U 600mm*800mm Floor Standing Network Server Rack Cabinets (Glass Door)



Bolein 27U 600mm*800mm free-standing DDF network rack enclosure server cabinet can be used in data centers, monitoring rooms, CCTV, and other places.
The front toughened glass door with a spring lock, side panels are removable, steel rear door with a round lock.
Assembled frame structure.
Cable entry and ventilation hole on top cover and bottom panel.
The main material is SPCC cold-rolled steel.
Mounting profile thickness is 2.0mm, mounting angle thickness is 1.5mm, others thickness is 1.2mm.
The degree of protection is IP20 and it can be customized.
Standard static loading capacity is 800 KG, and it can be increased to 1000 KG by adding auxiliary
mounting angle if need.
Adjustable feet and heavy-duty casters.
Cable manager, cooling fan, fixed shelf, sliding tray, patch panel, and other rack accessories are available.
If you are interested in it, you can contact us. We are also able to provide you the OEM racks.
Whatsapp: +8613467017439; Mobile/Wechat : +8617854120882; Skype: live:brenda123456fanhua; Email: sales3_cd@bolein.net; Site: www.bolein.net; bolein.en.alibaba.com

source

Continue Reading

Servers computers

HP ProLiant Quick Deploy Rail Kit installation

Published

on

HP ProLiant Quick Deploy Rail Kit installation

source

Continue Reading

Servers computers

Supermicro 1U 5017R-MF Intel Xeon E5 Rackmount Server

Published

on

Supermicro 1U 5017R-MF Intel Xeon E5 Rackmount Server



http://serverfactory.co.uk/budget-intel-xeon-e5-rackmount-server.html
Price as configured: £595.00
Budget Supermicro 1U 5017R-MF Intel Xeon E5 rackmount server
Intel E5-2603 1.8Ghz 80W QuadCore processor
Kingston 4GB DDR3 1333Mhz ECC REG
Onboard IPMI/KVM with Dedicated LAN
Without DVD player
350W Gold Level Power Supply
* without hdd, please choose in menu (max 1 hdd)
http://serverfactory.co.uk/budget-intel-xeon-e5-rackmount-server.html .

source

Continue Reading

Servers computers

INSTALASI RACK SERVER 42U #InstalasiRackServer #InstalasiWallmountRack #PindahanKantorJakarta

Published

on

INSTALASI RACK SERVER 42U #InstalasiRackServer #InstalasiWallmountRack #PindahanKantorJakarta



Kami adalah Perusahaan Jasa IT yang berlokasi di Jakarta.
Mengerjakan:
– IT Outsourcing/Manage Service
– IT Relokasi
– IT Instalasi Infrastruktur (CCTV + Alarm, PABX, IP PBX, IP Phone, Access Control)
– Web Hosting, Design dan Optimasi SEO
– Layanan Cloud dengan Office 365 for Bussiness dan G- Suite
– Smart Work Training
– Implementasi CRM (Agile CRM)

Spesialisasi Kami: Pindahan Server dan Perangkat IT Perusahaan.

Info detailnya, silahkan kunjungi website kami: https://mas-it.id/
atau hubungi kami di: 021 – 21472099 atau hallo@mas-it.id

Jangan lupa kunjungi online store kami di:
https://www.tokopedia.com/mas-it-1 &
https://shopee.co.id/masitonlinestore

Advertisement

#JasaPindahanJakarta, #JasaPindahKantorJakarta, #JasaPindahanKantorJakarta, #JasaPindahKomputerJakarta, #JasaPindahPerangkatITJakarta, #JasaRelokasiServer, #JasaITOutsourcing, #JasaITRelokasi, #JasaPindahServerJakarta, #JasaPindahKomputerJakarta, #JasaRelokasiServerJakarta, #JasaRelokasiServer, #RelokasiServer, #RelokasiKomputer, #JasaRelokasiKomputrer, #JasaRelokasiKomputerJakarta .

source

Continue Reading

Trending

Copyright © 2024 WordupNews.com