Connect with us

Servers computers

Let's Check Out an Old Blade Server System with 32 CPUs!

Published

on

Let's Check Out an Old Blade Server System with 32 CPUs!



Many, many servers these days run as virtual machines — but there was a time when virtualization was still just catching on, and companies needed physical servers to be as dense as possible. So let’s look at a blade server system from around 2010 that packs 32 CPU sockets and weighs 500 pounds!

Image of C7000 chassis will full-height blades: https://commons.wikimedia.org/wiki/File:HP_BladeSystem_c7000_Enclosure.jpg#/media/File:HP_BladeSystem_c7000_Enclosure.jpg

—————————————-­————————————-

Please consider supporting my work on Patreon: https://www.patreon.com/thisdoesnotcompute

Advertisement

Follow me on Twitter and Instagram! @thisdoesnotcomp

—————————————-­————————————-

Music by
Epidemic Sound (http://www.epidemicsound.com).

source

Advertisement
Continue Reading
Advertisement
31 Comments

31 Comments

  1. @SteveMacSticky

    September 27, 2024 at 5:51 pm

    I wonder where you work where you need these servers

  2. @eevd350z

    September 27, 2024 at 5:51 pm

    Actually from my experience you still need physical servers since VMware likes to take a shit after a power down. I say keep your desktops on VMs and keep your domain controllers physical!

  3. @왜못할거라생각해

    September 27, 2024 at 5:51 pm

    do you have a video for gpu server rtx 3090?

  4. @ncc17701a

    September 27, 2024 at 5:51 pm

    I've built many or these over the years. One project had 28 fully populated enclosures. I spent quite a lot of time building those (even using Puppet to do some of the basic deployment/configuration). HP also sell Virtual Connect modules – a way to consolidate and reduce the number of physical connections. Deployed that on a few other projects. A c7000 chassis can also take full-height blades and storage blades.

  5. @IkanGelamaKuning

    September 27, 2024 at 5:51 pm

    Had one in previous company I worked before. The same model. The lowest right, was used as email server. It worked fine in house, until transfer out to external hosting, because external utility power failure in weekend caused email access failure.

  6. @eliotmansfield

    September 27, 2024 at 5:51 pm

    Lovely bits of kit but the out of the box cost was very high before you even had 1 server, then once full you had to spend another huge amount of money to buy and network up the next chassis. Spent
    loads of time crunching the numbers and it was too expensive for our IaaS virtualisation environment and ended up buying good old DL380’s as the cost was more incremental. We did sell lots of c7000’s to customers who didn’t care about the economics

  7. @georgeh6856

    September 27, 2024 at 5:51 pm

    I worked on a similar product (non-Intel) from a different company a few years before this HP came out. The first generation of our product had problems but worked fairly well when we shipped it. The second generation, however, was a disaster. Almost the entire time we could not even install the OSes on it. The project manager who shortly before this got drunk and fell down at a company party as well as had pictures of him harassing a co-worker, was terrible. That guy broke all protocols, ignored our problem reports, and shipped the machines broken. Customers were not happy.

  8. @horacioabilio2420

    September 27, 2024 at 5:51 pm

    I have a problem with the blade server, there is one HDD which is red. How to solve it?

  9. @Ikxi

    September 27, 2024 at 5:51 pm

    wtf that power supply
    so much volume, and these server PSUs are denser than consumer stuff
    POWER

  10. @SuperMBARutgers2013

    September 27, 2024 at 5:51 pm

    Thank you.

  11. @petripuurunen2491

    September 27, 2024 at 5:51 pm

    Hi Colin! Its not even old, we still had lots of same c9000-enclosures fully housed in use in 2020. VirtualConnect and server/bay-profiles were pretty neat when HP brought it to market.

  12. @obsidian....

    September 27, 2024 at 5:51 pm

    This is really nice to see

  13. @seanh0123

    September 27, 2024 at 5:51 pm

    I remember installing about 16 of these one night at an equinix colo in 2008 I think. HP shipped all the blades, all the CPUs all the RAM all the hard drives everything in separate packaging. I had to open like a hundred CPU boxes two hundred little RAM boxes you get the idea. After 8 hours of assembling all the blades and installing them there was a no kidding 8 foot tall mountain of trash in the hallway 😂

  14. @TDub_ADV

    September 27, 2024 at 5:51 pm

    We still run blades at my company. Ours are Lenovo SN series in a flex chassis. We dont run individual apps on them ours are setup in a giant vmware cluster, 70 hosts and over 500 guest vm’s. The lenovo chassis have built in networking and brocade switches which greatly simplify the fiber cabling and with their clarity software management is a breeze. personally i strongly prefer a blade chassis over separate servers for a vmware cluster like ours.

  15. @MegaDraadloos

    September 27, 2024 at 5:51 pm

    I love these. Have a C7000 with 12 G8 blades at home. Couple of 12 bay storageblades in it for vsan, HPE 3Par with fiber connected to the C7000 and blades. Very rock solid, flexible solution!

  16. @userbosco

    September 27, 2024 at 5:51 pm

    I used to sell IBM's competitive blade solution back in early/mid-2000's. It had four BLOWERS on it for cooling, not fans. If I recall, it took a 60A 208V 3P circuit, or circuits. Nuts.

  17. @TheMooMasterZee

    September 27, 2024 at 5:51 pm

    Blades were great, even without virtualization, for heavy compute workloads. Several earlier MMORPGs used blades for their backends as data was all stored in a separate database and the shards just needed to communicate with all the clients and do all the server-side rng, management, and physics computation. One company has auctioned off individual retired blade units with a fancy acrylic cover at various points to earn money for charity.

  18. @leonardotoschi585

    September 27, 2024 at 5:51 pm

    The c7000 should have ilo 3, g1 g2 has the ilo 4 and g3 has ilo 5. That's the main diffe Between shassis. You can put g9 blades in a g1 enclosure and that's the cool part

  19. @mojamb0

    September 27, 2024 at 5:51 pm

    Wow, this was a blast from the past. I used this server before. I remember when you start the server, it sounds like a jet plane.

  20. @BP-kc3dj

    September 27, 2024 at 5:51 pm

    EXCELLENT!!!!!!

  21. @davidew98

    September 27, 2024 at 5:51 pm

    I had one at the old job. I would love to have one at home.

  22. @bobblum5973

    September 27, 2024 at 5:51 pm

    I worked with many of these, and all the features you spoke of, in one overall system of blade servers, chassis, redundancy, was simply amazing.

    I wrote Windows command line scripts that accessed the servers and iLO through PuTTY's "plink" ssh, gathering data and generating reports on things like pending RAID accelerator battery failures, RAID drive status, firmware versions, just about anything.

  23. @PedroOliveira-lz3mk

    September 27, 2024 at 5:51 pm

    It is a great for deploying Oracle RAC clusters. We deploy them with two 10Gb VCs, two 16 or 32 Gb Brocade SAN switches and two Infiniband switches on the backplane, and distribute the cluster members on 2 or 4 IB interconnected C700 G3 enclosures. Now that architecture is being replaced by using stand alone servers using 100Gb ethernet and the cabling is a nightmare. Not to mention rack space.

  24. @garbarmihail

    September 27, 2024 at 5:51 pm

    Cool

  25. @SpeakerCraft-q9m

    September 27, 2024 at 5:51 pm

    Great video!

  26. @tripleaaa2024

    September 27, 2024 at 5:51 pm

    I have problem with ilo card in c7000 blade server i don't know the password and i try to hard reset ilo card but unfortiently it doesn't response the signal lost and i had to reboot it and after rebooting there is no change happend is there any way to reset ilo card to default user and password so i can access it waiting for a response and thx in advance

  27. @geometricart7851

    September 27, 2024 at 5:51 pm

    and only 1 kilowatt per hour 🙂

  28. @ChairmanMeow1

    September 27, 2024 at 5:51 pm

    I interned at Caterpillar years ago and got a look at some absolutely giant HP server racks. Always found it so cool…. literally. Had to A/C the hell out of the area because the computers made so much ambient heat.

  29. @danthompsett2894

    September 27, 2024 at 5:51 pm

    note 72GB or 600GB not 72TB or 600TB per HDD so not much HDD space by todays standards for a server.

  30. @stijnl13

    September 27, 2024 at 5:51 pm

    I still have 2 chassis running with 2 full height Itanium blades each, dual virtualconnect and dual fibre channel switches connected to Dell VNX 🙂 Software migration away from our mainframes takes longer than expected. Rock solid!

  31. @simonlenhard1712

    September 27, 2024 at 5:51 pm

    I had change to buy something like this for 60$ i don´t know why i didn´t 🙁

You must be logged in to post a comment Login

Leave a Reply

Servers computers

Hardy 42U Server Rack Benefits Video

Published

on

Hardy 42U Server Rack Benefits Video



Looking for reliable server racks for your data center?

Here are 10 reasons to choose the premium perforated racks from Hardy Racks!

Number 1.
The front and back sides of the rack come with a total perforation of 86%, an excellent means to dissipate over 3.5 Kilowatts of heat while allowing the free inflow of cool air.

Number 2.
The heavy-duty metal body of the 42U rack comes with a load-bearing capacity of up to 1200 kilograms!

Advertisement

Number 3.
The perforated front door and the perforated, space-saving split rear doors come with a one-click removable feature – and can be fitted or removed without any tools!

Number 4.
The side panels are also detachable. They come with the provision to be kept locked when not in use. These features make the massive 42U rack easy to transport, install, and seamless to work with during maintenance!

Number 5.
The sticker-free numbering of U positions – both from the top to bottom and bottom to top – makes it really convenient for identifying rack positions for installation, troubleshooting and maintenance!

Number 6.
5 cable entries on the top and 5 cable entries at the bottom – provide you with the option to bring in your cables easily, whether you have a raised flooring or false flooring setup in your data center.

Advertisement

Number 7. (04:43 – 04:57)
The rack is spacious enough to handle more than one PDU, which can be mounted at the back of the server rack with the help of the vertical cable manager.

Number 8.
The insulated panes between the doors and walls of the server rack is a safety feature that prevents metal to metal friction which can cause serious damage in heat-producing environments.

Number 9.
6 points of grounding at the bottom, and 1 point of grounding at the top of the rack – an extremely important safety feature for a rack that will be filled with electrical equipment!

Number 10.
The stylish, rotary handle with an in-built lock on the front door takes up virtually no extra space and can be tucked in while not in use.

Advertisement

From toughened body to user-friendly features and all safety amenities required for smooth operations – we have thought of everything!

But don’t just take our word for it!

All our server racks are CE certified – which is the seal of trust that indicates that our products conform to all requisite standards.

Interested in knowing more?

Advertisement

Give us a call at +91 844 844 47 46 or visit www.hardyracks.com.

source

Continue Reading

Servers computers

Rakit rack server open 8U 19 inch

Published

on

Rakit rack server open 8U 19 inch



Source of inspiration @chrclmnky
Terima kasih

source

Continue Reading

Servers computers

INDORACK Close Rack 20U – Glass Door

Published

on

INDORACK Close Rack 20U - Glass Door

source

Continue Reading

Servers computers

Dell PowerEdge 1955/1855 Blade Servers

Published

on

Dell PowerEdge 1955/1855 Blade Servers



A short tour of the Dell PowerEdge Blade centre and servers featuding
the removable power supplies and ethernet, the BIOS, the RAID, and a
look inside the servers themselves. More info can be foun here:
http://www.server-centre.net/blog/dell-1955-blades-overview.htm .

source

Continue Reading

Servers computers

Rackmount NAS Servers – Before You Buy

Published

on

Rackmount NAS Servers - Before You Buy



NASCompares Free Advice Area – https://nascompares.com/contact-us/

Thanks for watching. Do you still need help? Use the NASCompares Free Advice section above. It is my free, unbias community support system that allows you to ask me questions about your ideal setup. It is NOT a sales platform, NOT a way to push hardware you don’t need and, although it is just manned by me and might take a day or two for me to reply, I will help you any way I can. Below are some more popular guides.

NAS Buyers Guide – Get It RIGHT First Time – https://nascompares.com/2021/01/01/nas-buyers-guide-2021-get-it-right-first-time/

Mesh Routers VS Powerline Adapters And Wi-Fi Extenders – Buyers Guide 2021 – https://nascompares.com/2021/03/08/mesh-routers-vs-powerline-adapters-and-wi-fi-extenders-buyers-guide-2021/

Advertisement

Synology NAS Unofficial Memory Upgrade Guide – https://nascompares.com/2020/04/06/synology-nas-memory-upgrade-guide-2020-edition/

How To Switch From Google Photos And Drive To Synology NAS – A Step By Step Guide – https://nascompares.com/2021/01/17/how-to-switch-from-google-photos-and-drive-to-synology-nas-a-step-by-step-guide/

This description contains links to and Amazon. These links will take you to some of the products mentioned in today’s video.

Amazon NAS Solutions – https://amzn.to/37oX47P

Advertisement

Or follow and speak with Robbie directly on his Twitter – https://twitter.com/RobbieOnTheTube

Still not enough? Then why not visit and subscribe to our blog. Updated regularly it provide you with hints and tips on how to make the most of your hardware here http://www.NASCompares.com

Don’t forget to visit them on Facebook to enter prize draws, giveaways and competitions, as well as hear about the latest news, NAS releases & offers – https://www.facebook.com/nascompares/ This description contains links to Amazon. These links will take you to some of the products mentioned in today’s video. As an Amazon Associate, I earn from qualifying purchases. .

source

Advertisement
Continue Reading

Servers computers

APC AR3300 SX Server Rack – 42U Data Center Enclosure

Published

on

APC AR3300 SX Server Rack - 42U Data Center Enclosure



APC AR3300 SX Server Rack enclosures for all 19″ rack mount servers. Data Center Racks available daily.
Toll Free: 877-307-7225
Web: www.global1resources.com
Ebay Store: global1resources .

source

Continue Reading

Trending

Copyright © 2024 WordupNews.com