Connect with us

Tech

3D-printed batteries aim to reshape energy storage in small devices

Published

on


Material won a $1.25 million contract from the US Air Force to validate the 3D-printing technology earlier this year. The 18-month project aims to demonstrate how printed, conformable batteries could transform design freedom for defense and aerospace hardware.
Read Entire Article
Source link

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tech

AT&T Launches Its Own Kid Phone in Collaboration With Samsung, the AmiGo Jr.

Published

on

Parents grapple with the modern day question of whether to give their kids phones for staying in contact and keeping tabs on their whereabouts, while also navigating the realities of too much screen time and shielding them from the corrosive effects of social media. 

AT&T just introduced its own answer, the AmiGo Jr. Phone, a Samsung smartphone with an AmiGo app that applies parental controls at the device level. Parents use an AT&T AmiGo app on their iOS or Android phone to manage apps, settings and screentime limits on the kid’s phone; the AmiGo software works only with this AmiGo Jr. Phone.

The AmiGo Jr. is a Samsung Galaxy A16 phone with a 6.7-inch display, 128GB of storage and a 5,000 mAh battery. It has a trio of cameras on the back: a 50-megapixel main camera, 5-megapixel ultrawide camera and 2-megapixel macro camera. The phone is available only in black.

Advertisement

The phone is available now online at AT&T, in AT&T stores and via the MyAT&T app, and priced at $3 a month for a 36-month contract. Parents also need to purchase an unlimited data line on their phone plan for the phone starting at $61 a month, plus pay a $35 activation fee.

Offering an inexpensive older camera for a child’s use isn’t new — it’s how parents often set up devices for kids. The Galaxy A16 was released in January 2025. What makes the AmiGo Jr. different is the AmiGo app implementing parental controls at the device level under Android 16, according to an AT&T spokesperson. Beyond the parental control features offered in Android, the AmiGo software adds Safe Zones that generate alerts when the phone has entered or exited them and a School Mode for restricting features during times when their attention should be focused away from the screen.

“After extensive, candid conversations with parents, we heard a clear message: This isn’t just a device decision — it’s a deeply personal one about trust, safety and staying connected,” said Erin Scarborough, AT&T senior vice president of revenue management and commercialization, in a statement. “Creating a kid’s phone was the natural and overdue next step for us.”

The company cited the fact that 40% of its current customers are parents as incentive to develop the AmiGo Jr. Phone. And based on its own research, 60% of parents of kids up to age 12 consider a smartphone to be a safety essential.

Advertisement

Building phones for kids is not a novel concept; CNET’s Katie Collins looked at the HMD Fusion X1 at last year’s Mobile World Congress, for example. And system-based parental controls have also become more robust in recent years, even as a recent study suggests that parents should wait until the age of 13 to give their kids a phone.

Also available now is the AT&T AmiGo Jr. Watch 2, a more durable smartwatch that ties into AT&T’s AmiGo system.

Source link

Advertisement
Continue Reading

Tech

I test smart lights for a living, and these are my top 3 Philips Hue smart lights to brighten up any space

Published

on

Philips Hue bulbs and lamps are among the best smart lights around, and there’s a dizzying array to choose from. As TechRadar’s smart home tech editor, I’ve had my hands (and eyes) on all of the main products, and have put together this guide to help you decide which ones are right for you.

If you’re new to the world of smart lights and just want to try replacing a few of your existing bulbs, I recommend the Philips Hue Essential series. These are entry-level versions of the brand’s standard color-shifting smart bulbs, and are much more affordable. If you want to add ambience to a room or create an Ambilight-style home-theater effect without the hassle of fitting light strips behind your TV, I recommend the Philips Hue Wall Washer, and if you want string lights that will be fun and functional throughout the holidays and beyond, Philips Hue Festavia gets my seal of approval.

Source link

Advertisement
Continue Reading

Tech

Browser interoperability drive made Safari work more like the others

Published

on

Safari now works a lot like other major browsers when it comes to displaying web content on an iPhone or Mac, after a year-long joint effort to make the online experience similar across the industry.

Safari web browser app icon featuring a blue compass with red and white needle on rounded white square, over blurred background of computer code and purple streaks
Safari is Apple’s web browser found in iOS, iPadOS, and macOS

As people who grew up with Internet Explorer and Netscape can attest, there can be a lot of difference between what one browser displays and what another shows. Thanks to an effort between multiple browser makers, including Apple, the web navigation tools now work a lot more predictably.
As explained in a Friday WebKit blog post, Interop 2025 was the fourth year when browser developers worked to improve the interoperability of browsers. The group, made up of Apple, Bocoup, Google, Igalia, Microsoft, and Mozilla, determined areas where interoperability matters for web developers, and then focused work on those features.
Continue Reading on AppleInsider | Discuss on our Forums

Source link

Continue Reading

Tech

Smartphone AI is slowly turning into bloatware we can’t remove

Published

on

There used to be a very easy way to deal with smartphone bloatware: you’d set up the device, find the folder of pre-installed games or apps you never asked for, and spend about 10 minutes deleting them. It was a bit of a tax on your time, but it was achievable. 

However, in the age of the AI-powered phone, bloatware now has a much smarter face. It’s being sold as the headline feature, and while a lot of it is technically impressive, we’re fast reaching a point where the sheer volume of ‘help’ is starting to feel like the very clutter we used to try so hard to avoid.

That thought really hit home this week after using the slimline Motorola Signature. The hardware is better than ever, with an impressive thin design, a top-notch screen, great camera performance and solid battery life, but the software is starting to feel like it’s suffering from an identity crisis. 

Motorola used to be the king of the near-stock Android experience, surpassed only by Google itself, but now it feels like they’re trying to do everything at once in this new AI arms race – and there’s no way to get rid of it. 

Advertisement

Motorola’s throwing everything at the wall and seeing what sticks

The most obvious sign of the more-is-more approach Motorola is taking is that it’s baked into not just the software but also the Signature’s hardware. 

Advertisement

On the right, you’ve got the same dual power/Gemini button found on most Android smartphones – but there’s also a button on the left for Motorola’s competing Moto AI. It’s a bold move, but it also highlights the central problem: the company isn’t sure which AI you should actually be using. 

Motorola Signature Catch Me Up featureMotorola Signature Catch Me Up feature
Image Credit (Trusted Reviews)

It’s not just buttons though; the interface is now home to a lot of competing ideas. You go to check your notifications and find ‘Catch me up’ summaries and daily briefings competing for space with your actual messages. 

You’ve also got a standalone Moto AI interface where you can ask Motorola’s assistant questions and tasks – but it’s not just Moto AI. There are also built-in hooks for Microsoft Copilot and Perplexity.

Advertisement

Individually, these are great AI tools, but when they’re stacked on top of each other and bundled within the Moto AI interface, the experience just starts to feel busy and overwhelming, especially if you’re new to the world of AI. 

Motorola Signature Moto AI interfaceMotorola Signature Moto AI interface
Image Credit (Trusted Reviews)

Advertisement

All the while, Gemini is still sitting there as the default Android assistant, ready to answer questions or get you somewhere using Google Maps – and in a very similar UI.

Instead of the stock approach to Android that made Motorola such a fan favourite, we’re now getting a phone that feels like it’s constantly trying to show off new tricks – and, for the most part, they’re not that helpful. 

If this were 10 years ago, each of those features would likely be a dedicated app – an app that we could uninstall if we wanted to. These AI features, though, are hard-baked into the system, and they’re not going anywhere anytime soon. 

Advertisement

Far from an isolated case

Of course, Motorola isn’t the only brand to try and insert AI-powered smarts into every crevice of the smartphone experience.

Brands like Apple, Samsung, Google, Oppo and Xiaomi are all actively doing the same thing, essentially trying to one-up each other to offer the widest range of tools available. But, in true Jurassic Park style, they were so preoccupied with whether or not they could, they didn’t stop to think if they should.

Advertisement

Galaxy S25 Ultra - Drawing Assist ResultGalaxy S25 Ultra - Drawing Assist Result
Image Credit (Trusted Reviews)

Don’t get me wrong, there’s a lot of genuine innovation happening in the smartphone AI space – features like real-time transcription, effective object removal, notification summaries and multi-agent AI chats are fantastic tools for the right person – but by making them mandatory, permanent fixtures of the interface, they stop feeling like tools and more like obstacles.

We’re reaching a tipping point where AI smarts are becoming the new bloatware, the stuff that gets in the way of us using our phones how we want. If manufacturers want the next generation of flagship phones to truly feel like a step forward, they need to learn that the most intelligent thing a phone can do is know when to stay out of the way. 

Advertisement

Source link

Continue Reading

Tech

Workers in Singapore are happy, but also burnt out. What’s up?

Published

on

Singapore is one of the happiest cities in the world—but are workers really happy? 

In the past three years, Singapore has consistently been among the world’s happiest cities, placing third in 2025. However, the latest Jobstreet by SEEK Workplace Happiness Index reveals a striking gap between expectation and reality. 

While 81% of workers in Singapore believe that workplace happiness is achievable, only 56% actually experience it. This “aspiration gap” places Singapore second to last on APAC happiness rankings, just above Hong Kong’s 47%, and below neighbours Malaysia, Thailand, and Indonesia.

Here’s what Vulcan Post found, and what employers can do to close the happiness gap.

The “Happy but burnt out” paradox

singapore worker happiness and burnout singapore worker happiness and burnout
Though “happy” employees still experience burnout, “unhappy” employees are more prone to it. / Statistics credit: Jobstreet

Even in Singapore’s high-pressure environment, a “good” job can take a serious mental and physical toll, even on workers who consider themselves ‘happy’.

Almost half of the workers surveyed reported feeling burnt out or exhausted by their work, with 41% in that category describing themselves as “happy”. Similarly, among the 39% who often dread going to work, 34% still describe themselves as happy: a clear illustration of conflicting emotions at work.

Advertisement

The survey has suggestions for employers. Leaders can bridge this gap by investing in employee well-being beyond routine check-ins. Benefits could include subsidised gym memberships, monthly wellness allowances, or confidential counselling services.

Money is not the answer to happiness; autonomy does

Singapore workers overall happiness and burnout by monthly salaries Singapore workers overall happiness and burnout by monthly salaries
Overall happiness and burnout by monthly salaries / Statistics credit: Jobstreet

While money is the most common demand, with 64% ranking salary among their top five happiness drivers, money alone rarely guarantees satisfaction. 

Happiness peaks at 72% for those earning above S$10,000 per month, but half of these high earners still experience significant burnout. This suggests that higher salaries often come at the cost of work-life balance, diminishing the perks of earning more.

Age and life pressures also shape workplace happiness. Millennials, the so-called Sandwich Generation, reported the lowest happiness (52%) and highest stress-related dissatisfaction (31%), often due to caregiving responsibilities. In contrast, baby boomers were the happiest (71%), likely benefiting from greater autonomy and meaningful freelance roles. 

Salaries aren’t the key to lasting happiness: purpose is, and only 50% of Singaporeans find it in their roles. Employers can help by offering projects aligned with employees’ interests and strengths, and career development plans that support individual goals, also make a difference.

Advertisement

Why should employers care?

How happiness determines how much effort they put in and employee retention in singaporeHow happiness determines how much effort they put in and employee retention in singapore
How happiness determines how much effort they put in, and retention / Statistics credit: Jobstreet

Jobstreet’s report showed that happy employees deliver ROI: they’re five times more likely to go the extra mile and 37% less likely to job-hop. 87% of unhappy workers often consider leaving, compared with 50% of happy employees, showing that happiness still boosts loyalty and eases recruitment and training pressures.

Workplace happiness is also a two-way street: 85% of employees see it as a shared responsibility, signalling that traditional perks alone aren’t enough. By actively addressing employees’ needs and fostering transparency, employers empower staff. 

The result? More resilient, successful operations that benefit everyone.

  • Read the full report here.
  • Read more articles we’ve written on job trends here.

Featured Image Credit: Shadow_of_light/ depositphotos

Advertisement

Source link

Continue Reading

Tech

New York lawmakers propose a three-year pause on new data centers

Published

on

New Yorker state lawmakers have introduced a bill that would impose a moratorium of at least three years on permits tied to the construction and operation of new data centers. While the bill’s prospects are uncertain, Wired reports that New York is at least the sixth state to consider pausing construction of new data centers. 

As tech companies plan to spend ever-increasing amounts of money to build AI infrastructure, both Democrats and Republicans have expressed concerns about the impact those data centers might have on surrounding communities. Studies have also linked data centers to increased home electricity bills.

Critics include progressive Senator Bernie Sanders, who has called for a national moratorium, as well as conservative Florida Governor Ron De Santis, who said data centers will lead to “higher energy bills just so some chatbot can corrupt some 13 year old kid online.”

More than 230 environmental groups including Food & Water Watch, Friends of the Earth, and Greenpeace recently signed an open letter to Congress calling for a national moratorium on the construction of new data centers.

Advertisement

Eric Weltman of Food & Water Watch told Wired that the New York bill — sponsored by state senator Liz Krueger and assemblymember Anna Kelles, both Democrats — was “our idea.” Data center pauses have also been proposed by Democrats in Georgia, Vermont, and Virginia, while Republicans sponsored similar bills in Maryland and Oklahoma.

According to Politico, Krueger described her state as “completely unprepared” for the “massive data centers” that are “gunning for New York.”

“It’s time to hit the pause button, give ourselves some breathing room to adopt strong policies on data centers, and avoid getting caught in a bubble that will burst and leave New York utility customers footing a huge bill,” she said.

Techcrunch event

Advertisement

Boston, MA
|
June 23, 2026

Last month, New York Governor Kathy Hochul announced a new initiative called Energize NY Development, which her office said would both modernize the way large energy users (i.e., data centers) would connect to the grid while also requiring them to “pay their fair share.”

Advertisement

Source link

Continue Reading

Tech

I’ve Been Doing My Own Renovations For 5 Years, And I Use These 5 Tools More Than Any Others

Published

on





We may receive a commission on purchases made from links.

Home renovations can feel intimidating, especially if you don’t have the right tools for the job. I spent most of my adult life renting, doing small projects around the house, but leaving the big repairs to my landlord. That all changed when I bought my house. The place was built in 1980, and just about everything inside it was old and either outdated or falling apart. Suffice to say, it needed a fair bit more than a fresh coat of paint.

Advertisement

In the years since, I’ve replaced roofing, plumbing, lighting, flooring, drywall, trim, and crown molding. I’ve also installed and tiled a new shower and tub, built a shed, and converted a room into a home library with custom-built shelves. And with each new project, my tool collection grew a little bit larger.

There are certainly projects that require specialty equipment, but I’ve found that there are a handful of tools that I reach for at some point in just about every job that I do. Of course, there are a few obvious ones. You probably don’t need anyone to tell you that a hammer and a screwdriver set will come in handy during home repairs. There are plenty of other tools you likely already have in your junk drawer that will come up all the time as well. A reliable level, a quality ratchet set, some hex wrenches, and some needlenose pliers are also sterling additions to any collection that deserve an honorable mention, but there are five tools that I find come in handy more often than any others.

Advertisement

Drill and impact driver

This is technically two tools, but drills and impact drivers are often sold together in kits, and it’s definitely worth getting both if you’re going to take on a lot of big projects. The drill is probably the most important power tool for home renovations that you can own. Not only do you need a drill for making pilot holes for fasteners, but it’s also useful for other tasks.

I’ve used a drill with hole saw attachments to cut holes for plumbing and other utilities, for example, while cylindrical sander and burr grinding bits have helped me open up narrow channels in wooden doors when installing new knobs and locks. Brush attachments can be used to clean out vents, while mixing attachments can blend paint, mortar, and grout. The ability to use a drill with so many different attachments that have nothing to do with drilling makes it absolutely vital for almost every kind of maintenance and renovation.

Having a dedicated impact driver expedites many tasks for a couple of reasons. The first is simply that having your drilling and driving bits on separate tools makes it quicker to swap between them. The second is that impact drivers are different from drills. They have more power, with a mechanism that creates a hammer-like motion. This gives the driver mechanical downward force in addition to high-speed rotation. This is particularly useful for framing, roof sheathing, and underfloor installation. It helps get that initial bite in the wood, drives fasteners quickly, and sinks them. I have this DeWalt 20V Max Cordless Drill and Impact Driver kit that has yet to let me down.

Advertisement

Utility knife

A quality utility knife is going to be your best friend in all kinds of different renovation tasks. I’ve used mine for scoring drywall and cement backerboard, cutting lengths of insulation, removing old caulk, cutting roofing shingles, scraping off excess mortar, and running the blade along dried paint lines to prevent accidental peeling. But that’s really just the tip of the iceberg. There are a million different uses for a utility knife that come up in every renovation, and once you own one, you’ll find yourself reaching for it every few minutes.

Advertisement

To be clear, I’m not talking about bargain-bin box cutters with flimsy, plastic cases and blades that dull after the first cut. I personally have two that I use all the time. The first is the OLFA 18mm Heavy-Duty Utility Knife, which uses snap-off blades that are excellent for fine cuts. This utility knife has a sturdy handle and a strong ratcheting lock that doesn’t slip like cheaper ones do. Pair this with a pack of OLFA blades, and you’ll always have a sharp razor that’s ready to go at a moment’s notice. Just break off the dull blade with a pair of pliers, and you have a fresh tip that’s good to go.

For more heavy-duty tasks, I use the Milwaukee Fastback Press and Flip Utility Knife. It uses thicker, stronger blades, and its all-metal construction makes it a strong choice for tasks that require a lot of pressure. It also has tool-free blade changing, which makes it easy to maintain.

Advertisement

Miter saw

When it comes to big power tools, the miter saw is the one that I’ve found comes in handy most often. I’ve used my table saw, circular saw, jig saw, and reciprocating saw for various projects, but the miter saw is probably the one where I’ve spent the most time with my finger on the trigger.

This tool allows you to make cross, miter, bevel, and compound cuts quickly and easily. That means that you can get reliable 90-degree cuts, as well as the more complex angles you might need for corners and edges. The ability to make all of these different kinds of cuts is what makes the miter saw useful for just about any task that involves cutting a board to length, as long as the board is narrow enough to fit beneath the blade.

I’ve used it to cut 2x4s for framing, as well as flooring boards, shelves, trim, molding, and a wide range of other materials. Your options aren’t limited to just wood, either. You can actually use a miter saw with a good carbide-tipped blade to cut plastics like PVC, ABS, and vinyl, aluminum transition strips, and composite materials like those used in decking.

Advertisement

My miter saw is an old Craftsman model I got from my father-in-law that isn’t in production anymore, but the DeWalt 12-inch Double Bevel Sliding Compound Miter Saw is an excellent premium option for those seeking a reliable tool for all their home renovation needs. Those seeking something more affordable might prefer a tool like the Metabo HPT 10-inch Single Bevel Compound Miter Saw.

Advertisement

Tongue and groove pliers

There are a lot of different kinds of pliers out there, but the type that I reach for most often is tongue-and-groove pliers, also known as channel lock pliers. These have an adjustable slip joint that makes them easy to lock in different widths, allowing you to simply squeeze to get a sturdy grip on whatever it is you’re using them on.

I find these come in handy during plumbing tasks. I’ve used these pliers to tighten and remove threaded pipe, water lines, slip joints, pipe caps, pipe plugs, and various other fixtures. I’ve replaced faucets and toilets, installed tub and shower fixtures, and modified internal plumbing with these guys, and they’ve never let me down. They’re also really good for situations that involve working with large nuts and bolts. Tongue-and-groove pliers are ideal for gripping one side of a connection while you tighten or loosen the other with a ratchet.

These tools are pretty sturdy, and even a cheap pair can handle a lot of abuse. I personally use the Doyle 10-inch High Performance Grove Joint Pliers from Harbor Freight, which I’ve found to be very grippy and offer plenty of leverage. Other options include the Craftsman 10-inch Groove Joint Pliers, which are among the highest rated on Amazon, and the Channellock 10-inch Tongue and Groove Pliers that users consider one of the best tools you can buy at Lowe’s.

Advertisement

Oscillating multi-tool

The oscillating multi-tool is one of those products that you can get by without for a really long time, but which you’ll question why you didn’t buy sooner once you actually have one. These little tools oscillate blades of various types and shapes, making them great for many different applications. I first purchased mine when I was replacing some old, ratty roll-on flooring with vinyl tile. The old flooring was much thinner than the tile, so I needed to trim the door frames to make the tile fit underneath. An oscillating multi-tool was the perfect tool to get the job done without breaking out a hacksaw or taking the framing off the wall first.

Since I added one to my tool bag, I’ve found myself using it more and more for all kinds of renovation tasks. It’s great for the small, straight drywall cuts needed for things like vents, switches, and outlets, which is why I ended up using it every single day when I replaced the ceiling in my bedroom. I’ve also used it to start plunge cuts in underflooring, to cut threaded screws, and to sand corners and tight spaces that round sanders couldn’t reach. I also purchased some diamond file blades when I replaced my shower to remove large mortar deposits from between the tiles before grouting.

Advertisement

I use the DeWalt 20V Max XR Oscillating Multi-Tool. It’s strong and reliable, and I’ve yet to encounter any issues with it. That said, there are dozens of more affordable options out there, such as the WEN Oscillating Multi-Tool Kit, if you only need a multi-tool for a single project.



Advertisement

Source link

Continue Reading

Tech

Embracing unconventional talent with Tenable’s Thomas Parsons

Published

on

The latest episode of The Leaders’ Room podcast season four features Thomas Parsons, head of Tenable in Ireland and VP of product management. This series is created in partnership with IDA Ireland.

Once again in season four of The Leaders’ Room podcast, we get to know the leaders of some of the most influential multinationals in tech, life sciences and innovation, as well as getting insights into their leadership styles and the high-tech trends they see coming down the line.

In this latest episode, we speak to Thomas Parsons, who heads up threat exposure cybersecurity company Tenable in Ireland as well as serving as VP of product management for the Maryland-based company, about a career that parallels the evolution of the cyber threat landscape since the ’90s, and a style of leadership that spots the best cybersecurity talent sometimes in the least expected places.

Advertisement

It’s a fascinating listen charting Parsons’ distinguished career in cybersecurity, from Symantec, via Intel to Tenable which he joined shortly after the exposure management company arrived in Ireland in 2016. Parsons was indeed Tenable’s first R&D hire in 2017, and today some 50pc of the 140-strong Irish team work on the R&D side in Dublin, he tells us.

In a series on leadership, Parsons got to work at Symantec at a time when a renowned leader took the reins – John Thompson. A longtime IBM alumnus, Thompson radically changed how Symantec thought about security for organisations, at a time when large-scale cybercrime and nation-state attacks were not yet on the agenda. Under Obama, Thompson was considered for the role of Secretary of Commerce, and Nancy Pelosi appointed him to the Financial Crisis Inquiry Commission in 2009.

Parson also got to experience first-hand the process of Tenable going public, including being on the ground in New York on the day it did so. His thoughts on how good leaders in his sector need to keep an eye out for talent in places you might least expect are well worth a listen as are his insights on what might be coming down the line.

We’re grateful to all our interviewees again this season, for taking the time out of busy schedules to come into the studio and share their insights and their intelligence with us. And a big thanks as ever to our partners IDA Ireland who make this series possible.

Advertisement

The Leaders’ Room podcast is released fortnightly and can be found by searching for ‘The Leaders’ Room’ wherever you get your podcasts. For those who prefer their audio with visuals, filmed versions of the podcast interviews are all available here on SiliconRepublic.com.

Check out The Leaders’ Room podcast for in-depth insights from some of Ireland’s top leaders. Listen now on Spotify, on Apple or wherever you get your podcasts.

Source link

Advertisement
Continue Reading

Tech

Free Bi-Directional EV Chargers Tested to Improve Massachusetts Power Grid

Published

on

Somewhere on America’s eastern coast, there’s an economic development agency in Massachusetts promoting green energy solutions. And Monday the Massachusetts Clean Energy Center (or MassCEC) announced “a first-of-its-kind” program to see what happens when they provide free electric vehicle chargers to selected residents, school districts, and municipal projects.

The catch? The EV chargers are bi-directional, able “to both draw power from and return power to the grid…” The program hopes to “accelerate the adoption of V2X technologies, which, at scale, can lower energy bills by reducing energy demand during expensive peak periods and limiting the need for new grid infrastructure.”

This functionality enables EVs, including electric buses and trucks, to provide backup power during outages and alleviate pressure on the grid during peak energy demand. These bi-directional chargers will enable EVs to act as mobile energy storage assets, with the program expected to deliver over one megawatt of power back to the grid during a demand response event — enough to offset the electricity use of 300 average American homes for an hour. “Virtual Power Plants are the future of our electrical grid, and I couldn’t be more excited to see this program take off,” said Energy and Environmental Affairs Secretary Rebecca Tepper. “We’re putting the power of innovation directly in the hands of Massachusetts residents. Bi-directional charging unlocks new ways to protect communities from outages and lower costs for families and public fleets….”

Additionally, the program will help participants enroll in existing utility programs that offer compensation to EV owners who supply power back to the grid during peak times, helping participants further lower their electricity costs. By leveraging distributed energy resources and reducing grid strain, this program positions Massachusetts as a national leader in clean energy innovation.

Advertisement

Source link

Continue Reading

Tech

Amazon’s big bet, a ‘MySpace for bots,’ and a conversation with AI veteran Oren Etzioni

Published

on

This week on the GeekWire Podcast: Andy Jassy tells Wall Street that Amazon is planning $200 billion in capital expenses this year, mostly to build out AI infrastructure, and investors give it a thumbs down.

Microsoft’s financial results beat expectations but the company loses $357 billion in market value in a single day after investors learn the extent of its dependence on OpenAI.

Meanwhile, OpenAI leases 10 floors of office space in Bellevue, lawmakers in Olympia propose new taxes impacting startup exits and high-income earners, and the bots get their own social network. 

In our featured conversation, recorded at a dinner hosted by Accenture in Bellevue, GeekWire co-founder Todd Bishop sits down with computer scientist and entrepreneur Oren Etzioni to talk about AI agents, the startup landscape, the fight against deepfakes, and what good AI leadership looks like.

Etzioni is co-founder of AI agent startup Vercept, founder of the AI2 Incubator, professor emeritus at the UW Allen School, venture partner at Madrona, and the former founding CEO of the Allen Institute for AI.

Advertisement

“Moltbook is to agent networks as Myspace was to social networks,” he posted on LinkedIn. “It’s a sign of what’s to come, and will soon be supplanted by more secure and more pervasive alternatives.”

Upcoming GeekWire Podcast Live Event: Join us from 4 p.m. to 6 p.m. Thursday, Feb 12 at Fremont Brewing for a live recording of the GeekWire Podcast with Todd Bishop and John Cook. Free for Fremont Chamber members, $15 otherwise. Register here.

Agents of Transformation: Check out the series and join us for the conference, presented by Accenture, March 24 in Seattle.

With GeekWire co-founder Todd Bishop. Edited by Curt Milton. Music by Daniel L.K. Caldwell.

Advertisement

Source link

Continue Reading

Trending

Copyright © 2025