Kane Parsons just made it free for anyone with an internet connection. The 16-minute piece of footage that played after the credits in the limited theatrical Everything Must Go Edition of his A24 film is now sitting on his Kane Pixels YouTube channel as a proper new episode in the long-running series.

Its release is a little later than expected. The extended theatrical edit hit theaters in early July, and the extra material was limited to those exclusive screenings until August 18, when it was ultimately released to the general public, adding 16 minutes and four seconds to the low-res square frame that defined the original found-footage shorts. For those who were unable to return to the cinema or simply wanted to take a closer look at the sequence without the pressure of a ticking clock, the wait is now over.

Sale

YGSKK Mini Projector with Wifi and Bluetooth, Built-in Apps,Movie Projector

• 【The Latest WIFI 6 Technology And Bluetooth 5.3】This projector with Wi-Fi and Bluetooth is equipped with the latest Wi-Fi 6 technology, compatible…
• 【Built-in Streaming Media APP】Without any additional equipment,The YGSKK Wi-Fi projector supports streaming apps such as Prime Video, YouTube, and…
• 【Native 1080P High Definition,Compatible 4K】The native 1080P resolution presents you with clear and sharp full HD picture quality, with a…

The short begins on a hot June 18, 1990. A small team from Async, all dressed in hazmat suits, goes through a sector of the Complex known as the Kelowna Branch. One of them has a camera slung over their shoulder. At first glance, the early corridors appear to be familiar, but soon the gang enters a room covered in sale placards. The same two lines of text appear repeatedly: “EVERYTHING MUST GO! ENTIRE STORE ON SALE.” Several of these signs hang so low that they sink straight through the floor, with the bottom edges disappearing into the carpet and concrete as if the sign had run out of steam.

The researchers treat the entire survey as if it were routine. They return the next day, armed with measuring instruments and thorough notes. Ronald McCarthy, one of the team members, observes that the three visible signs make a distinct pattern, and that a fourth sign should be hidden right behind the nearest wall. They cut into the drywall and, as expected, find the fourth sign, as well as a mannequin hand protruding out of a beam. Another cut reveals more of the figure, including a ship’s steering wheel, coat hooks, and various pieces of dispersed lawn furniture. The space on the other side of the wall is dark and empty, and it was clearly designed using the same visual language as Cap’n Clark’s Ottoman Empire, the zany furniture store at the center of the feature film.

The entire thing plays like a dry-as-dust research report, not a gruesome horror short. We occasionally see photographic stills interrupting the video. The radio noise is muffled under those hazmat hoods, and you know what takes up an unexpected amount of screen time? Sign measurements. The anxiety gradually increases during the scene, aided by repetition and the growing realization that the Backrooms is now duplicating portions of the outside world, albeit in an extremely flawed fashion.

Parsons completed the entire project in what must have been less than two weeks, employing the same creative approach that proved successful with the web series. It fits beautifully as the 25th entry in the series while also acting as a direct bridge to the feature film. Anyone who has watched the feature will recognize the business, signs, and final shape from a mile away. Anyone who is just familiar with the YouTube work will recognize the Async team, the clipped things, and the way the researchers describe this strange material in such a meticulous, almost bureaucratic manner, as if they knew they shouldn’t be there.

I was delighted to get Hibiscus (otherwise known as hot pink), but there’s also a more subtle Pistachio (warm green), and the usual Frost (white) and Obsidian (black). I’m sad they cut Indigo (surely everyone’s favorite from last year). Like Apple, Google seems to save the fun colors for the regular Pixel, and the Pros look more muted.

Despite a 6.3-inch screen, this is what passes for a small phone nowadays. Switching from last year’s Pixel 10 Pro XL, I really appreciated how easy it was to handle the Pixel 11 one-handed. It’s a little thick, but it feels good in hand and has almost the same profile as the Pro, so you can use cases interchangeably. And I do recommend snagging a Pixel 11 case; I already scuffed the paintwork when I dropped it on the beach.

The screen is the same as last year’s: an excellent 6.3-inch OLED display with a 1080 x 2424-pixel resolution and refresh rates of 60 or 120 Hz. It’s a shame Google didn’t upgrade to a variable refresh rate (1 to 120 Hz) since it can save battery life. It also defaults to 60 Hz, and you have to dip into the Display settings to toggle on the smoother 120 Hz. The display is plenty bright with a 3,000-nit peak brightness; I never found myself squinting. Side by side with the Pro, it’s not quite as bright or sharp, and it has larger bezels, but you have to look closely to see the difference.

The fingerprint unlock is as good as any, but Google’s Face Unlock still doesn’t work in the dark, which will annoy any iPhone defectors. US buyers will also have to do without a SIM slot, as the Pixel 11 is eSIM-only stateside. Physical SIM cards make switching between phones more straightforward, but phone makers and carriers have made that process smoother with eSIMs than in the past. Sure, it’s much easier to pop a card in than to go through your carrier when traveling abroad, but setting up an international eSIM isn’t that complex. Both have benefits, but with US phones and carriers embracing eSIM over the past couple of years, it’s become a nonissue.

Power Up

The new chip, Google’s Tensor G6, is supposed to deliver 20 percent gains in power efficiency, 25 percent faster browsing, and 15 percent faster app loading. The Pixel 11 has 12 GB of RAM and 256 or 512 GB of storage. For everyday use, it feels fast and responsive. I had no issues with loading apps or scrolling web pages, and the camera app feels a bit faster. Compared with my Pixel 10 Pro XL, I also noticed the Pixel 11 notified and loaded video from my Nest video doorbell a second or two faster.

I put it through its paces with the challenging mobile game Wuthering Waves. It was playable, but the action stuttered, and even on the Balanced (graphics and performance) setting, there were dropped frames aplenty during combat. After an hour, the Pixel 11 was warm, and the battery went from 40 to 26 percent. Less demanding games, like Mini Metro and Alto’s Odyssey, were fine, but dedicated gamers should still look elsewhere.

A retired military hauler once tasked with moving troops and supplies now carries a double bed, a Miele oven, and a bathroom most studio apartments would envy. Sitting on Cars & Bids right now is this ACELA MONTERRA GL 4×4 finished by Krug Expedition, a fully sorted expedition truck whose current asking range still sits below many 2026 Porsche 911 configurations while the auction runs.

Stewarts & Stevenson were the ones who created the original M1078A1 for the US Army. Later, Acela Truck Company acquired the surplus chassis, stretched it out, and made it all civilian-friendly by converting the Monterra GL into it, before pairing it with Krug’s 16-foot living module. Its power comes from a Caterpillar 7.2 liter inline six turbodiesel engine, which produces roughly 330 horsepower and 860 lb ft torque. An Allison 7-speed automatic with integrated transfer case distributes torque to all four wheels. There is a unique 113 gallon aluminum gasoline tank on board to keep you running on extended trips no matter what.

Sale

BLUETTI Elite 300 Portable Power Station for RV & Home Backup 3014.4Wh

• [Compact 3kWh Power — Verified by Frost & Sullivan] – Elite 300 packs a full 3014Wh capacity into an ultra-compact design—nearly 59% smaller than…
• [RV-Ready with TT-30 Port & 12V/30A DC Output] – Designed for RV power systems, Elite 300 includes a TT-30 RV outlet and high-current 12V/30A DC…
• [Reliable Home Backup Power for Outages] – Be prepared for unexpected power outages. With 3014Wh capacity and 2400W output, the Elite 300 keeps…

The off-road kit is as serious as the engine, with forty-six inch Goodyear tires on 20-inch wheels providing a monstrous 22 inches of ground clearance. You get a central tire inflation system, a permanent four-wheel drive system with a 50/50 split when needed, an auto lock differential, high-speed gearing, and a 30-inch water fording capacity. That means this device can handle a desert, beach, or woodland trail without issue, whether you want to glide over the dunes or simply get to the center of nowhere.

Down within Krug’s module, you’ll find a torsion-free subframe that separates the living space from the chassis; the walls and ceiling are all composed of thick GRP laminate with lots of glass fibers. You get hardwood cabinetry, a permanent double bed in the back, and a dinette on one side that converts into another sleeping area, allowing you to have a suitable two-person layout. A fold-out table and few bench seats transform the lounge into somewhere you actually want to hang out.

The kitchen equipment in this thing is mostly unaffected by the usual limitations that most camper vans face. There’s an Miele induction hob on a soft-touch Fenix worktop, as well as a compact Miele oven with microwave and steam functions. And then there’s the Vitrifrigo fridge freezer, which has an impressive 169 liters of fridge space and 57 liters of freezer space. A genuine stainless steel sink with a built-in soap dispenser completes the wet side.

The bathroom features a real shower and a dry separate toilet, as well as 130 gallons of fresh water with three stages of filtration. You get 66 gallons of gray water from a tank underneath. A rooftop air conditioner and a hydronic heating system provide climate control. You’ll be “off the grid” owing to a 24 volt, 990 amp hour Li battery powered by a cheeky 1400 watt solar array. And just for good measure, all of your gear that needs to stay outside is placed in some aluminum storage crates.

The meter reading is approximately 12,000. It looks like it’s been loved like a family member, with little wear and tear. This thing is ready to leave Cheyenne and hit the open road. For anyone looking to escape the daily grind and live a life of wide open spaces, you’ll find almost everything you need right here, all packed up in one convenient package that can still handle obstacles most luxury cars can only dream of, and the auction is still going on, so the price is still unknown for the time being. What we do know is that this monster is already in some nice company, and a lot of those other things can’t even get out of their own way.
[Source]

‘Only markets in three categories – infrastructure; data and AI; and identity, access and network security – are broadly positioned for clear growth,’ finds Forrester.

Worries of a ‘SaaSpocalypse’ miss the bigger picture, says market research firm Forrester, which finds that AI’s impact on the service industry is anything but uniform.

Its new data-driven AI disruption model, a platform built on its in-depth research into the market, confirms a few widely recognised beliefs.

First, many of the enterprise software categories affected by AI will be reshaped rather than displaced.

The need for services to support in embedding technology into workflows, regulatory requirements and switching costs, alongside the growing demand for data, orchestration, governance and trust capabilities, will keep these support sectors relevant despite the heavy disruption they may face.

Second, the sectors most likely to invest in and succeed in the AI era are, unsurprisingly, those in the data, agentic, network, infrastructure and security sectors.

Sectors poised for success look to be those providing the infrastructure, data, governance, trust, and security capabilities that underpin AI adoption – rather than AI application vendors – as businesses move from experimenting with the technology to deploying it across their organisations.

These AI ‘enablers’ include cloud platforms, data centre and storage providers, and creators of AI models and platforms. Cybersecurity and identity providers are also expected to profit.

In comparison, skills-based services will face disruption as AI is expected to assume tasks that traditionally depended on human knowledge, according to Forrester.

Its model finds sectors including technology implementation, software development, creative services, localisation and training to be among those expected to come under strong pressure.

“Every technology and service market is facing an AI overhaul,” said Craig Le Clair, vice-president and principal analyst at Forrester, who co-authored the research.

“Our research shows that AI’s benefits will not be distributed evenly across technology markets. Only markets in three categories – infrastructure; data and AI; and identity, access and network security – are broadly positioned for clear growth. Technologies in the other categories will be forced to adapt.”

Ted Schadler, vice-president and principal analyst and the research’s other co-author, said: “The challenge for technology and service providers is not simply understanding where AI is advancing but how it will reshape the economics of their markets.”

Forrester’s new model analyses the impact of AI on 17 technology and service categories spanning more than 200 markets across factors including AI substitutability, labour intensity, support for agentic workloads, commercial models, data and trust advantages, agentic workload support, AI-focused R&D investment, regulatory friction, asset intensity and switching costs.

Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.

from the the-rich-get-richer dept

Warner Brothers CEO David Zaslav oversaw years of dysfunction during the last wave of pointless Warner Brothers AT&T and Discovery mergers, which included tens of thousands of brutal layoffs, consistent creative infighting, endlessly higher prices, cancelled programming, and endless chaos.

Unlike most of us, who’d be shitcanned and ostracized, Zaslav is the kind of affluent brunchlord who can only fail upward. He saw $165 million in compensation in 2025, and is poised to cash out with a $550 million golden parachute should the Paramount and Warner Brothers merger succeed.

With the merger postponed due to a 12-state antitrust lawsuit, Zaslav is still finding a way to fail upward either way the wind blows, most recently in the form of a $21.7 million stock sale. Which is on the back of two additional stock sales of $173 million earlier this year:

Zaslav’s latest sale of 773,173 shares of WBD stock, for an aggregate market value of $21,655,292, was handled on his behalf by Fidelity Brokerage Services, according to a company filing with the SEC Thursday. That came after the exec sold $59.47 million of stock in July and $114 million March.

Nice work if you can get it.

Zaslav is among the highest paid executives in media despite having done absolutely nothing to deserve such outsized compensation. He’s seen virtually nothing in the form of meaningful penalties for degrading the brand, derailing countless creative projects, overseeing devastating layoffs across the sector, or generally turning once-premiere brands like HBO into clunky has beens.

Guys like Zaslav aren’t actually building anything useful, nor are they remotely interested in the longevity of the company, its customers, the talent that powers it, or the people who work there. They’re playing with funny numbers to try and perpetually generate the illusion of impossible permanent growth at incredible scale, then cashing out when the check finally comes due for their complicated shell games.

As always, it’s labor and consumers that eat most of the costs at the other end, something that’s likely to accelerate dramatically should Paramount’s $111 billion acquisition of Warner Brothers survive state antitrust challenge.

Filed Under: brunchlords, ceo pay, david zaslav

Companies: warner bros.

Genesis just showed the world its first full-size electric SUV, the GV90, and the doors alone are enough to stop traffic. On the range-topping Neolun version, the rear doors open backward while the fronts swing forward. A dual-motion hinge lets the rear doors slide out a short distance first, then swing wide. When both pairs stand open, the B-pillar vanishes from view. Genesis calls the arrangement the Neolun Arch Gate and claims it is the first coach-door system that can open and close each door on its own. The result is a single, unbroken opening that feels closer to stepping into a private lounge than climbing into a conventional three-row SUV.

The identical Neolun model can be ordered as a four-seat Executive Suite, although this is not the only configuration option. Real wood veneer covers the second-row floor and even warms the space with soft heat from beneath, a modern spin on the popular Korean underfloor heating system. The armrests, side panels, and even the door trims join in the fun. When the car is parked, the front seats simply swing around to face the back, allowing four people to sit in a circle and speak. There’s also a privacy divider, a fridge, fold-out tables, and a glass ceiling (that allows you to adjust the transparency to your mood), all of which contribute to the feeling of a fancy living room on wheels. Seats with 15 individual air cells and a special metallic coating on the windshield that clears ice without the use of a climate system, because who needs the car’s heating to keep the windshield clear when you have this?

Sale

Bambu Lab A1 mini 3D Printer + LED Lamp Kit, Ready-to-Use for Beginners

• A1 mini + LED Lamp Kit for Creative Light Projects: Bring your ideas to life with the included LED Lamp Kit. Simply print compatible lamp models and…
• The Perfect 3D Printer for Beginners: A1 mini 3D Printer is designed to make 3D printing easy from day one with automatic calibration, simple setup…
• Experience the Bambu Lab Ecosystem: Access MakerWorld’s huge library of ready-to-print models, manage prints through the Bambu Handy app, and enjoy…

A dual-motor setup generates 657 horsepower and 590 lb-ft of torque. The 123.5-kilowatt-hour battery is the largest Hyundai Motor Group has ever fitted to an electric vehicle, which bodes well for range. So we’re looking at about 310 miles with the lighter seven-seat configuration, but with a lower load, and a 350-kilowatt charger that can charge the battery from 10 to 80 percent in 22 minutes. Multi-chamber air suspension ensures a smooth ride, and rear-wheel steering allows you to tilt the steering wheel a sharp 5 degrees, making the 208-inch-long GV90 feel like a midsize sedan.

Inside the cabin, the flat floor and the long 127.8-inch wheelbase provide plenty of space. When the vehicle is parked, the 23.6-inch OLED panel appears, and when there is additional space available, it extends to a 24.6-inch cinematic display. You also have a 25-inch head-up display that projects speed, navigation, and driver-assistance information directly in front of you. Twenty-five Bang & Olufsen speakers provide Dolby Atmos sound, and for added peace of mind, a new roof airbag deploys when you’re on your roof in a rollover, keeping everyone safe inside.

The regular GV90 is equipped with conventional doors and six or seven seats. Both use the same engine, battery, and much of the technology. There are sixteen exterior colors to pick from, including three matte finishes, while the limited Neolun comes in a special two-tone paint. The body color 24 inch forged wheels complement the wool cashmere touches inside.

Production will begin in the 2027 model year, although pricing has yet to be determined. We predict the conventional version to start about $100,000, while the Neolun variations will likely cost more. Genesis is positioning the GV90 as a comfy SUV, a place for you and your friends to hang out while driving, rather than a pure efficiency machine. With its coach doors, oak floor, and lounge seating, the GV90 feels more like a private room on wheels than a normal three-row hauler.
[Source]

Bambu Lab packed its most approachable machine into a footprint that fits on a crowded workbench and still delivers results that used to require far more patience and money. The A1 Mini, priced at $224.10 (was $249), reaches first-time owners fully assembled, already squared, and loaded with automatic routines that handle the tedious setup steps older printers forced users to master by hand. Unbox it, remove a few shipping ties, plug in power and Wi-Fi, and the machine begins calibrating itself. Bed leveling, vibration compensation, nozzle pressure checks, and Z-offset all happen without paper tests or manual adjustments. Most people reach a successful first print inside twenty minutes.

The build volume is a cube of 180 by 180 by 180 millimeters. This little beast of a machine can tackle a variety of projects, including phone stands, desk organizers, miniature tools, figurines, and about every useful component a beginner may require. Larger projects are more difficult to complete because they must be split and glued, but it is a small price to pay for keeping the item compact and stable. The moving bed and strong frame with full-metal linear rails maintain the motion looking smooth, even when the tool head is rushing ahead.

Sale

Bambu Lab A1 mini 3D Printer + LED Lamp Kit, Ready-to-Use for Beginners

• A1 mini + LED Lamp Kit for Creative Light Projects: Bring your ideas to life with the included LED Lamp Kit. Simply print compatible lamp models and…
• The Perfect 3D Printer for Beginners: A1 mini 3D Printer is designed to make 3D printing easy from day one with automatic calibration, simple setup…
• Experience the Bambu Lab Ecosystem: Access MakerWorld’s huge library of ready-to-print models, manage prints through the Bambu Handy app, and enjoy…

Speed is one of the primary reasons to purchase this printer. Official top speed is 500 millimeters per second with an acceleration of 10,000 millimeters per second squared, but in the real world, most people find that quality prints top out at 180-300 millimeters per second depending on the model, which is still a lot faster than those low-cost machines that were the norm for beginners just a few years ago. In some cases, a standard Benchy test model can conclude in less than twenty minutes, which is equivalent to completing a work break.

The print surface is ready to go because all you have to do is place the provided textured PEI plate on it and heat it to 80 degrees Celsius. When the print is finished, simply let it cool and it will pop out with a little flex. The all-metal hotend is capable of reaching 300 degrees Celsius and includes a 0.4 millimeter stainless nozzle that can be quickly replaced. You may also modify the nozzle size to 0.2, 0.6, or 0.8 millimeters to change the print detail or flow. Direct-drive extrusion works well with PLA, PETG, TPU, and PVA. ABS, on the other hand, is out of the question since the open frame and moderate bed temperature cannot maintain a consistent heat level.

The machine monitors things as it goes, such as filament runout, tangle detection, and power outage recovery, to help prevent those annoying unsuccessful prints that can occur overnight. There’s even a camera on board that records your print progress and allows you to create time-lapse videos, which is really cool. The touchscreen is 2.4 inches in size and color, and you can operate pretty much anything from there, but there’s also free software and a phone app to help with slicing, remote monitoring, and file transfer by Wi-Fi or microSD. Best of all, there are pre-tuned profiles for most of the popular filaments, so you don’t have to go through all that trial and error stuff..

Original Bamboo Lab A1/A1 Mini AMS Lite Filament Hub, 4-in-1 PTFE Adapter,Compatible with Bambu Lab A…

• 【AMS lite Filament Hub】It is an essential part for switching different printing materials smoothly when using multiple filaments. It connects to…
• 【Supports Multi-Color Printing】Supports up to 4 filaments for switching. Works with AMS Lite to realize multi-color and multi-material printing…
• 【Low Friction & Durable】Low friction design ensures smooth filament switching and fewer jams. Made of solid material, it works well with PTFE…

If you want to go fancy, there is an extra AMS Lite unit that adds four-color support. This device sits outside the printer and can switch materials on the fly during a single job; it’s like magic, I tell you. You can perform multi-color printing without constantly changing filament, but it generates waste and takes up more room, and don’t get me started on flexible filaments…

Even in the quieter modes, this machine is reasonably quiet, with noise levels of less than 48 dB, allowing you to use it in a shared living room without bothering anyone. It also weighs only 5.5 kilograms and measures 347 by 315 by 365 millimeters, making it easy to transport if necessary. The greatest part is that everything comes in one box, including a starter spool, spare nozzle, some tools, and adhesive, so you’re virtually ready to go from the start.

Facepalm: The latest Patch Tuesday update for Windows 11 started rolling out last week, bringing multiple new features, improvements, and bug fixes. However, following several complaints from disgruntled users, Microsoft has now acknowledged that the update may be causing some games to crash on affected devices.

The KB5121003 update was released on August 11 for Windows 11 builds 26200.9168 and 26100.9168. According to some users who installed the update, it contains a bug that is causing games to crash and display the EXCEPTION_ACCESS_VIOLATION error. In some cases, the PC automatically reboots after the crash.

After Redditor MyCatsNameIsKlaus reported the issue last week, several others confirmed that they were also experiencing crashes, error messages, and random reboots after installing the update. Redditor Thin_Twist7030 even posted event logs, WER reports, and a kernel dump analysis by DeepSeek, suggesting that the game crashes were actually system BSODs that occurred while playing Arc Raiders.

The AI analysis suggests that the problems are caused by a pre-existing “bad-handle bug” that Windows previously ignored or returned an error for when an invalid handle was closed. However, the update appears to have tightened kernel handle validation, causing the same invalid handle close to trigger bug check 0x93 INVALID_KERNEL_HANDLE instead of being tolerated.

Microsoft confirmed that the issue is affecting Windows 11 versions 25H2 and 24H2 and is investigating whether it is caused by the update or incompatible third-party software. The company added that affected games include Arc Raiders, Marvel Tokon: Fighting Souls, and The Finals.

Microsoft hasn’t suggested an official workaround, but Thin_Twist7030 claims that rolling back KB5121003 via DISM stopped the crashes on his system. They added that they have paused Windows Update for one month so that the contentious update package won’t automatically reinstall. As a permanent fix, they recommend that users remove old drivers responsible for the bad-handle bug.

Game crashes and random reboots are apparently not the only issues caused by KB5121003. According to a Microsoft Learn post by Brian Stringfellow, Teams and the new Outlook are no longer working on Arm devices after installing the update. While Teams crashes after opening, the new Outlook doesn’t even launch. The classic Outlook app, however, works as expected.

Stringfellow claims that the issue is affecting a Snapdragon-powered Microsoft Surface Laptop 7th Edition assigned to his company’s CFO. He added that the same problem cropped up earlier this year after installing KB5094126, but the issue was resolved by simply rolling back the update. The problem has now apparently reemerged following last week’s update.

Microsoft has yet to respond to the report, but a couple of other users replied to the thread, confirming that they are also experiencing similar issues on the HP OmniBook 3 and Surface Pro 11, both powered by Arm64 processors.

A lawsuit has been filed against the well-known smart ring brand Oura, alleging the company used false advertising by deceiving users about the accuracy of its AI-generated sleep tracking. The suit, filed Thursday by Clarkson Law Firm in San Francisco, seeks class action status and a jury trial.

“Oura built an $11 billion company on that trust,” the lawsuit alleges. “To capitalize on consumers’ desire for a tracker that could actually track sleep and monitor their sleep cycles. Oura sold expensive tracking rings, priced at $300 and up, advertising exactly that: that Oura rings are capable of seeing what only a hospital sleep lab can see.”

Representatives from Oura didn’t immediately respond to a request for comment.

The lawsuit alleges that Oura Ring‘s algorithms and sensors can’t detect the physiological signals required to accurately measure the details of the different stages of sleep. Instead, the suit alleges that Oura’s devices rely on “AI-generated guesses” that are no better than “a coin flip.” Since Oura says otherwise in its marketing and product details, the suit alleges the company is deceiving customers who have bought an Oura Ring.

Head over to Oura’s website, and you’ll see the company says its wearables track seven sleep elements, including REM and deep sleep, to provide a sleep score. The suit points out that Oura’s marketing includes statements such as “95% Sleep Staging Accuracy compared to clinical sleep lab,” but alleges that sleep labs require complex methods, including multiple electrodes to measure brain activity, which Oura’s products lack.

“When people rely on a device to guide decisions about their health, misinformation cannot be tolerated,” Ryan Clarkson, co-founder and managing partner at Clarkson Law Firm, said in a press release. “Oura users trust that the numbers on their screen reflect reality. People structure their days, interpret the way they feel and design their lives around inaccurate figures.”

What does this mean for Oura?

Nasha Addarich Martínez/CNET

It’s too early to say whether Oura Ring buyers could join the suit, or what specific compensation they could get should the trial go ahead or a settlement be reached.

For more insight, I asked one of CNET’s experts on Oura products, Senior Editor Anna Gragert, what she thinks of the company.

“While health trackers like the Oura Ring can flag potential symptoms that may prompt a helpful conversation with your doctor, they can’t diagnose,” Gragert said. “They’re also not the same as the medical equipment you’d find at your doctor’s office. For sleep scores and stages in particular, these are just estimates … don’t overemphasize a single data point or ‘score.’”

Gragert also mentioned that more research is needed on devices like those Oura sells.

“It’s also important to consider that wearable health trackers have been launched at a pace that’s made it difficult for scientific research to keep up, so more studies investigating the potential downsides of these devices are needed,” she said.

This isn’t the first lawsuit Oura has faced: There is an ongoing class action alleging that Oura collected sensitive personal information without customer consent for two years.

Tyler Lacoma

Editor / Home Security and Smart Home

Advertisement

Tyler has worked on, lived with and tested all types of smart home and security technology for over a dozen years, explaining the latest features, privacy tricks, and top recommendations.

With degrees in Business Management, Literature and Technical Writing, Tyler takes every opportunity to play with the latest AI technology, push smart devices to their limits and occasionally throw cameras off his roof, all to find the best devices to trust in your life. He always checks with the renters (and pets) in his life to see what smart products can work for everyone, in every living situation.

Living in beautiful Bend, Oregon gives Tyler plenty of opportunities to test the latest tech in every kind of weather and temperature. But when not at work, he can be found hiking the trails, trying out a new food recipe for his loved ones, keeping up on his favorite reading, or gaming with good friends.

See full bio