HarperCollins is tapping into AI to bring some of its book franchises to life. Specifically, the publisher is teaming up with Toonstar, an AI animation studio, to turn them into digital shows. The first project will be an adaptation of Lisa Greenwald’s “Friendship List” series, which will also be joined by a graphic novel.

You’d be forgiven for being unaware of Toonstar, a studio that received some buzzy early on for simplifying typically complex animation pipelines with AI, but has mostly remained under the radar. Its biggest claim to fame is producing StEvEn and Parker YouTube series, which has amassed 3.38 million subscribers and sometimes has episodes reaching around a million views. It’s not something I’ve heard animation fans speaking about, though. And honestly, it was tough to sit through a few minutes of its sub-South Park animation.

“By leaning into the [AI] technology, we can make full episodes 80 percent faster and 90 percent cheaper than industry norms,” Toonstar co-founder John Attanasio, told The New York Times last year. In that same interview, the company revealed that it uses AI across its production, including having it dub dialog for international audiences, as well as working on storylines.

Toonstar initially pitched itself as an animation studio leaning into Web3 and NFTs, but those technologies seem virtually absent from the company’s presence today. Space Junk, one of its early series, was “put on hold for a variety of reasons,” a representative told Engadget. “It’s possible we’ll resurrect the concept in the future,” they added. Its original domain now points to a crypto gambling site.

“We’re honored to bring Friendship List to life as an animated series,” Attanasio said in a press release. “Our artist-centered approach ensures these beloved characters and stories stay true to the author’s vision, while our Ink & Pixel production technology enables fast, high-quality production at scale which unlocks the ability to meet audiences where and when they enjoy content today.”

Toonstar has certainly proved it can make “content” for YouTube. Can it actually produce an enjoyable animat edshow? That’s another question entirely.

Revel is heading into AXPONA 2026 (April 10-12) with a clear focus: the debut of its new Performa4 speaker series, expected to fall between $2,000 and $7,000 per pair. Under the HARMAN Luxury Audio Group umbrella, which also includes Arcam, JBL Synthesis, Lexicon, and Mark Levinson, Revel isn’t going after statement pricing here. Performa4 is aimed at the part of the market where most serious systems are actually built, and where the competition is crowded, well established, and not particularly forgiving.

Revel Performa4 Speaker Series

Revel’s Performa4 Series is a new loudspeaker line built on the company’s established approach to acoustic design and measurement. It reflects three decades of engineering focused on controlled performance and consistent results in real-world listening environments.

Revel’s Performa4 Series consists of two floorstanding models (F346 and F345), two bookshelf speakers (M146 and M145), a center channel (C245), and a powered subwoofer (B140). With multiple configurations available, the Performa4 lineup can be used in both two-channel music systems and multichannel home theater setups.

“At Revel, science is at the heart of everything we do. The Performa4 series represents the culmination of thousands of hours of research, development, and real-world testing. With our new 7th-generation Acoustic Lens waveguide and advanced DCC and MCC transducers, we’ve raised the bar for what’s possible in this class,” said Jim Garrett, Senior Director of Product Strategy and Planning at HARMAN Luxury Audio.

Acoustic Lens Waveguide, DCC and MCC Transducers Explained

The Performa4 series uses Revel’s Deep Ceramic Composite (DCC) and Micro Ceramic Composite (MCC) drivers, developed to improve stiffness while keeping mass low and reducing unwanted coloration.

Woofer and midrange drivers are built on cast aluminum frames designed with Finite Element Analysis to optimize airflow, control resonance, and maintain structural stability. Each driver also uses an inverted surround and integrated trim ring, which simplifies the front baffle and keeps the layout clean.

Revel’s 7th-generation Acoustic Lens waveguide is paired with a 1-inch DCC dome tweeter to improve integration with the midrange driver. The waveguide is designed to control dispersion more consistently across the listening area, while also supporting higher efficiency and lower distortion, including at off-axis positions.

Revel Performa4 Industrial Design

The Performa4 series adopts a clean, modern design that builds on Revel’s established cabinet approach without adding unnecessary complexity.

All models use magnetically attached grilles for a flush, hardware-free front panel, along with black accent detailing that keeps the visual profile consistent across the range. Cabinets are internally cross-braced to improve rigidity and reduce unwanted vibration.

Curved side panels are finished in real wood veneers, available in Natural Walnut and Black Walnut, offering a straightforward aesthetic that fits into both traditional and contemporary spaces.

Revel Performa4 Models

F346 

The F346 is a 3-way floorstanding loudspeaker and the top model in the Performa4 series.

It uses three 6.5-inch (165mm) MCC woofers, a 6.5-inch (165mm) DCC midrange driver, and a 1-inch (25mm) DCC dome tweeter paired with Revel’s 7th-generation Acoustic Lens waveguide.

Dual rear-firing ports provide low-frequency extension, while dual 5-way binding posts support bi-amping or bi-wiring. The cabinet is fitted with solid aluminum feet and includes optional floor spikes for added stability.

The F346 is rated for a frequency response of 30Hz to 40kHz (±6dB), with 88dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 20 to 250 watts.

F345

The F345 is a 3-way floorstanding loudspeaker that shares the same core design as the F346, using smaller drivers in a more compact cabinet.

It features three 5.25-inch (130mm) MCC woofers, a 5.25-inch (130mm) DCC midrange driver, and a 1-inch (25mm) DCC dome tweeter paired with Revel’s 7th-generation Acoustic Lens waveguide.

Dual rear-firing ports support low-frequency output, while dual 5-way binding posts allow for bi-amping or bi-wiring. The cabinet includes solid aluminum feet with optional spikes for placement flexibility.

The F345 is rated for a frequency response of 36Hz to 40kHz (±6dB), with 87dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 30 to 225 watts.

M146

The M146 is a 2-way bookshelf or standmount speaker positioned in the middle of the Performa4 lineup.

It uses a 6.5-inch (165mm) MCC woofer paired with a 1-inch (25mm) DCC dome tweeter and Revel’s 7th-generation Acoustic Lens waveguide.

The crossover network incorporates air-core inductors, and dual 5-way binding posts support bi-amping or bi-wiring. Optional MFS4 floor stands are available for proper placement and listening height.

The M146 is rated for a frequency response of 43Hz to 40kHz (±6dB), with 86dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 15 to 200 watts.

M145 

The M145 is a compact 2-way bookshelf speaker and the smaller option in the Performa4 lineup.

It features a 5.25-inch (130mm) MCC woofer paired with a 1-inch (25mm) DCC dome tweeter and Revel’s 7th-generation Acoustic Lens waveguide.

Like the M146, it includes 5-way binding posts for flexible connectivity and is compatible with the optional MFS4 floor stands for proper positioning.

The M145 is rated for a frequency response of 54Hz to 40kHz (±6dB), with 85dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 15 to 150 watts.

C245

The C245 is a dedicated center channel speaker designed for use in multichannel systems with other Performa4 models.

It features dual 5.25-inch (130mm) MCC woofers flanking a 1-inch (25mm) DCC dome tweeter, paired with Revel’s 7th-generation Acoustic Lens waveguide for consistent dispersion across the front soundstage.

The C245 is rated for a frequency response of 55Hz to 40kHz (±6dB), with 86dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 15 to 200 watts.

B140 

The B140 is a powered subwoofer designed to integrate with the Performa4 series in both two-channel and home theater systems.

It uses a 10-inch (250mm) fiber-composite woofer driven by a 750-watt RMS Class D amplifier, with up to 1,500 watts peak output. The design targets low-frequency extension down to 26Hz.

Rear-panel controls include a variable low-pass filter (50–150Hz), LFE input, phase adjustment, volume control, and auto on/off functionality. A rear-ported enclosure using Revel’s Constant Pressure Gradient design is intended to reduce turbulence and maintain cleaner low-frequency output.

MFS4 Floorstands 

Revel also offers the optional MFS4 floor stands for the M146 and M145 bookshelf speakers.

Constructed from extruded aluminum and steel, the MFS4 stands are designed to position each speaker at an appropriate listening height. They include built-in cable management and optional spikes for use on carpeted surfaces. The stands are sold in pairs.

Revel Performa 4 Comparisons

Revel B140 Subwoofer

The Bottom Line 

Revel’s Performa4 series is a calculated move into one of the most competitive segments in loudspeakers. The combination of DCC and MCC driver materials, the 7th-generation Acoustic Lens waveguide, and consistent cabinet engineering across the range points to a focus on controlled dispersion, tonal consistency, and predictable in-room performance; areas where Revel has historically been very disciplined.

The lineup is clearly built for flexibility. It can anchor a straightforward two-channel system or scale into a full home theater without mixing and matching across different voicings. That matters for buyers who want system coherence without overthinking every component swap.

What’s less clear is how much separation there is between models beyond size and output, and whether the subwoofer’s pricing will make sense for buyers building out a full system. There’s also no indication of built-in room correction or system-level integration features, which are becoming more common even in passive speaker ecosystems when paired with modern electronics.

This is for listeners who want a complete, measurement-driven speaker system in the $2,000 to $7,000 range without stepping into five-figure territory. Not entry-level, not cost-no-object—right in the middle where most serious systems live.

At AXPONA 2026, the F346 will be demonstrated with an Arcam SA45 integrated streaming amplifier and CD5 CD player, which should give a clear sense of how the top model performs with both streaming and physical sources.

Pricing & Availability

The Revel Performa4 series begins shipping in April through authorized Revel dealers and custom installation installers. All models are available in Natural Walnut and Black Walnut wood veneer finishes.

Suggested retail pricing is as follows:

• F346 Triple 6.5-inch Floorstanding Speaker – $6,999/pair
• F345 Triple 5.25-inch Floorstanding Speaker – $4,999/pair
• M146 6.5-inch Bookshelf Speaker – $2,999/pair
• M145 5.25” Bookshelf Speaker – $1,999/pair
• C245 Dual 5.25” Center Channel Speaker – $1,499/each
• B140 10-inch Powered Subwoofer – $2,999/each
• MFS4 Floor Stands – $699/pair 

The Revel Performa4 series will make its official debut at AXPONA 2026, April 10-12, at the Schaumburg Convention Center in Chicago, IL.

For more information, visit www.revelspeakers.com

Related Reading:

French fries are delicious, but notoriously unhealthy. A research team at the University of Illinois, however, has developed a deceptively straightforward method to keep the satisfying taste and crunch without requiring as much oil.

The cooking method combines traditional frying and microwave heating. Adding that microwave step could reduce the amount of oil used in the process, meaning you would absorb less fat with each bite. All the secrets to being able to cook fries in this way have been laid out in two studies published in Current Research in Food Science and The Journal of Food Science.

French Fries and Health

Although popular, fried foods contain high levels of fat, which is linked to several health problems, including obesity and hypertension. “Consumers want healthy foods, but at the time of purchase, cravings often prevail,” says Pawan Singh Takhar, author of one of the two studies. “The high oil content adds flavor, but it also contains a lot of energy and calories.”

It’s precisely with the goal of helping consumers make better food choices without feeling deprived that researchers have been trying to figure out how they can cook healthier french fries, achieving lower fat content without altering their taste and texture.

One of the main difficulties in frying, as the studies explain, is preventing the oil from penetrating the food. In the early stages of the french fry process, in fact, the pores of the potato are filled with water, leaving no room for the oil.

As cooking continues, however, the water evaporates, creating empty spaces that allow the oil to be drawn in by negative pressure. Much of the frying process takes place under that negative pressure, which essentially increases the tendency of the oil to be sucked into the fries

A New Wavelength

In the new study, therefore, the researchers tried to figure out how to extend the time in positive pressure and reduce the period under negative pressure. “When we heat something in a traditional oven, the heat transfers from the outside to the inside, but a microwave oven heats from the inside to the outside because the microwaves penetrate everywhere in the material,” Takhar says.

Specifically, microwaves cause water molecules to oscillate, resulting in increased vapor formation and thus shifting the pressure profile toward positive values that prevent the oil from being easily absorbed.

Microwave frying alone, however, would not produce the desired texture. “If only microwaving is used, the food turns out mushy,” says Takhar. In order to achieve crispness, frying and microwaving should be combined.

To achieve the right balance, the researchers carried out an experiment in which they specially designed a microwave fryer, monitoring temperature, pressure, volume, texture, moisture, and oil content of the chips. “We propose to combine the two methods in the same device. Traditional heating maintains crispness, while microwave heating reduces oil consumption,” the study concludes.

It’s been more than 50 years since NASA astronaut Harrison Schmitt took the famous Big Blue Marble photograph, showing a breathtaking vision of Earth taken aboard the Apollo 17 spacecraft on its way to the moon. Now, as the four-astronaut crew of the Artemis II mission heads toward the moon, more spectacular images are being released.

This stunning photo is perhaps the most reminiscent of the Big Blue Marble, showing Earth in all its fragile, lovely glory.

“That’s us!” NASA wrote in a post. The post also quoted astronaut Christina Koch as saying of Earth, “You guys look great.”

In a reply to questions on the post, NASA wrote, “Two auroras (top right and bottom left) are visible in this image. Zodiacal light (bottom right), is also visible, as well as airglow from Earth’s atmosphere.”

Another neat photo from the Artemis mission shows the planet neatly bisected, with one side lit up by the sun and the other in darkness.

Advertisement

“You look amazing, you look beautiful,” Victor Glover, Artemis II pilot, said of the views of Earth in a video call with ABC News.

Another intriguing image shows part of the spacecraft itself. USA Today noted that “the image appears to show the bottom of Orion’s service module where its main engine and auxiliary thrusters are housed.”

We’re tracking the 10-day Artemis II mission with a regularly updated blog.

Keep an eye on NASA’s image repository to see the latest photos.

The total workforce at Tesla’s factory outside Austin, Texas shrunk dramatically last year as the company suffered its second straight year of declining sales, according to a compliance report spotted by Austin American-Statesman.

Tesla went from employing 21,191 people at the factory in 2024 to 16,506 workers in 2025, a drop of 22%. That’s despite the company’s global workforce growing from 125,665 employees in 2024 to 134,785 employees in 2025, according to filings with the U.S. Securities and Exchange Commission.

It’s not clear which teams were most affected by Tesla scaling back its workforce at the plant. But the company has become one of the largest employers in the Austin area since it opened the factory in 2022. CEO Elon Musk also relocated Tesla’s headquarters to the factory in 2021 before it opened. The company has invested more than $6.3 billion in the facility to date, according to the new report.