An old-style graphics system as found on many 8-bit computers and on early PC graphics cards drew its characters by retrieving their bitmaps from a ROM. With a little sideways thinking, [GloriousCow] has exploited this process to make a CGA card perform graphical tricks it was never designed to do.
The CGA card clocks its character ROM continuously across the whole screen, even at the edges where nothing would normally be displayed. By placing the ROM in tandem with a Raspberry Pi Pico 2 they were able to use this ROM clocking as a synchronization signal, and inject whatever pixel data they chose.
The result is a CGA card that can display 60 Hz high-res graphics in text mode, albeit with a very retro one bit color depth. It can overlay the text and the graphics too, because the ROM is still present. One fun result of this is a bouncing DVD logo screensaver, on a DOS PC.
Advertisement
There’s a PCB and a promise of more, meanwhile we suggest you take a look at an impossible feat using a similar technique: NES Doom.
In this week’s “Sunday Reboot,” Liquid Glass gets an award, Tim Cook heads to China once again, and a wish for HomeKit to be more cat-friendly.
Sunday Reboot is a weekly column covering some of the lighter stories within the Apple reality distortion field from the past seven days. All to get the next week underway with a good first step.
Since its introduction, Liquid Glass has been widely criticized for not being good enough for the perfection-seeking average user. It was an aesthetic that led to complaints that it was too transparent, or when it wasn’t transparent, that it wasn’t transparent enough.
Advertisement
It was a change that you either liked or hated, and that Apple worked to try and make people like.
Liquid Glass in iOS 26 – Image Credit: Apple
This is in part due to Apple having invested so much time in the design. So much so that you can expect it to hang around in the iOS 27 and macOS 27 generation, and be enhanced further.
While its user base has seemingly underappreciated Liquid Glass, it still got its dues from the experts. It received a Gold Cube honor at the 2026 Art Directors Club of New York Awards.
Advertisement
At a minimum, it means judges who know about the hard work and thinking that goes into design acknowledge what Apple has done. Even if there is a vocal contingent who dislike it.
No, it wasn’t the only thing Apple got a Gold Cube for, as it was honored for its Apple TV rebrand and a couple of ads too. But Liquid Glass getting a gong is a big thing for something that everyone complained about since the outset.
After a year of living with it, Apple’s reached a good place with the UI. As a modern interface, it’s an aesthetic that I can certainly live with, without much complaining.
When WWDC hits in June, Apple will certainly be making more changes, but it’s got a decent base to work from. Just hope it doesn’t go too nuts with it.
Advertisement
Tim Cook in China, once again
Current Apple CEO Tim Cook is enjoying his last few months in the hot seat, in preparation for the John Ternus era. While he can take his victory lap with ease, Cook is still the top man at the company for the moment, and so is still being called upon to do his CEO thing.
The latest is a headline that we have heard quite a few times before: Tim Cook has gone to China.
President Donald Trump and Apple CEO Tim Cook at a previous meeting
We’re all familiar with Apple executives visiting Asia for various reasons, and Cook has done so quite a few times already. He’s visited stores, talked to developers, and even took part in the recent anniversary celebrations there.
Advertisement
This time, it’s somewhat different. He’s gone there with a bunch of executives from other companies, as part of a group following U.S. President Donald Trump to the country.
Trump’s trip is one about trade, a hot topic that he wants to talk to Chinese President Xi Jinping about. Naturally, Trump needed to bring over a bunch of CEOS to emphasize the point of America being serious about business.
Cook’s travel on a US-sanctioned package holiday is still of benefit to Apple, despite really being more to support Trump’s high-level discussion. He has spent years building a working relationship with Trump to Apple’s considerable advantage.
At the very least, it will be a way to pacify Trump as Cook shifts from CEO to Executive Chairman in the fall. Cook will still be around, dealing with the political side of Apple on behalf of Ternus, who simply doesn’t have a history with Trump at all.
Advertisement
The Trump trip wouldn’t have been that productive for Cook at the time, but it’s one to help maintain a relationship for Apple’s future. At least while Trump is in charge.
Cat business and the need for HomeKit to adapt
As an Apple-focused site, it won’t surprise anyone that our team uses HomeKit and the Apple Home in various ways. We also know that cats rule the Internet, so if there’s an excuse to talk at length and to put photos of them up, we’ll take it.
On Friday, the two topics combined in a piece discussing the various ways one AppleInsider writer uses HomeKit with his collection of fluffy mischief missiles.
However, as usual, HomeKit is not playing that big a part here compared to what it could be doing. There’s some elements that can be HomeKit-powered, like cameras for monitoring and sensors for gates, but not the specialized stuff.
Advertisement
In Wesley’s case, that consisted of two product categories. One is an automatic pet feeder and the other is an automatic litter box.
Wesley’s cat Harvie handling business in the Litter-Robot 5.
While I can’t talk much about the feeder, I can certainly enthuse about the benefits of an automatically-cleaning cat toilet. With four cats of my own, it’s something that makes the air clearer and the process of ejecting used litter considerably easier, as I have mentioned before.
That said, these sorts of products are not directly supported by HomeKit at all. There’s no specific product category for a cat toilet, so we are stuck relying on a companion app.
Advertisement
My wish is for Apple to open up HomeKit in WWDC to allow manufacturers to specify the controls and sensors that HomeKit can access on their hardware. To me, this does obviously mean enabling some functions for automatic litter boxes and other devices in HomeKit.
The hope is that hardware could be added to HomeKit regardless of whether there is existing support for particular product categories. Sure, Apple could more firmly define what is permissible to do with a litterbox in HomeKit in the future, but I just want to be able to have a “Clean it now” button in HomeKit.
Sure, I wouldn’t mind having the hall light flashing red if the litter box is “full” and needs cleaning. But really, just having the ability to put the basic controls into HomeKit at all would be great.
Last week’s Sunday Reboot discussed Apple’s chip troubles, trademarking oranges, and “Schmigadoon!” going fantastically in its life after Apple TV.
Word traveled quickly through gaming circles about a solo developer’s latest update to his ongoing effort. Mark runs the YouTube channel called I Make Games and has poured months into rebuilding Diablo 2 inside Unreal Engine 5. His project began as a way to test what the old game might feel like from a first-person viewpoint and has now grown to include smooth switching into third-person mode as well.
Recently released footage shows a barbarian careening all over Mount Arreat’s snowy peak, and guess what? This time, we get to view it from both first and third person perspectives. The character is destroying adversaries with the iconic Whirlwind skill we all know and love, while three guardian spirits known as the Ancients loom big ahead. Mark used AI to create the boss models, then rigged and animated everything with the engine’s rudimentary blueprint tools. The entire scene took around ten days to complete and captures the scale of the summit as well as the frenzied rate of potion consumption that longtime gamers are accustomed to. Switching camera angles creates a really realistic sense and allows you to see exactly what’s going on with the character’s gear and motions during the combat.
XBOX EXPERIENCE BROUGHT TO LIFE BY ROG The Xbox gaming legacy meets ROG’s decades of premium hardware design in the ROG Xbox Ally. Boot straight into…
XBOX GAME BAR INTEGRATION Launch Game Bar with a tap of the Xbox button or play your favorite titles natively from platforms like Xbox Game Pass…
ALL YOUR GAMES, ALL YOUR PROGRESS Powered by Windows 11, the ROG Xbox Ally gives you access to your full library of PC games from Xbox and other game…
We’ve previously seen several early videos that show us various aspects of the experience. A video shows the player walking through the monastery gate area before using a charge skill to crash into the fray. The inventory displays appear clearly, with all of the loot items dropped by killed foes, as well as one of the carver shaman enemies, which behaves exactly as it does in the original source material. You’ll also notice some modern tweaks, like as the ability to just climb over low obstacles or slide across surfaces without losing the fundamental fighting sense that we’re all familiar with. In testing, fireballs are shooting through the air, and teleport moves allow players to blink across gaps or even directly through some walls.
Mark is flying solo on this one, managing the most of the systems with blueprint scripting. He’s recreating environments like the rogue encampment and blood moor, taking great care and attention to get the lighting and details exactly perfect while maintaining the iconic gothic tone that we all know and love. Even the character meshes for Cain and Akara began as AI-generated models that he improved and altered. From the start, the intention was to keep the game as near to how it was in 2000 as possible while also providing the presentation refinement that today’s hardware demands. [Source]
Marshals, a new Yellowstone spinoff starring Luke Grimes as Kayce Dutton, is airing on CBS right now. You can also tune in with Paramount Plus. The Yellowstone sequel series sees Grimes’ former Navy SEAL join an elite unit of US Marshals to bring range justice to Montana, according to a synopsis from CBS.
The show includes Yellowstone actors Gil Birmingham as Thomas Rainwater, Mo Brings Plenty as Mo and Brecken Merrill as Tate. Spencer Hudnut is the showrunner of Marshals — formerly known as Y: Marshals — and Taylor Sheridan is an executive producer.
Advertisement
When to watch new Marshals episodes on Paramount Plus
Episode 12 of Marshals airs on CBS on Sunday, May 17. Viewing options for Paramount Plus customers vary by subscription tier. You can watch the episode live if you have Paramount Plus Premium, which includes your local CBS station. If you subscribe to Paramount Plus Essential, you can watch the installment on demand the following Monday, but not live on Sunday.
Here’s a release schedule for the next two episodes of Marshals.
Episode 12, The Devil at Home: Premieres on CBS/Paramount Plus Premium on May 17 at 8 p.m. ET/8 p.m. PT/7 p.m. CT. Streams on Paramount Plus Essential on May 18.
Episode 13, Wolves at the Door: Premieres on CBS/Paramount Plus Premium on May 24 at 8 p.m. ET/8 p.m. PT/7 p.m. CT. Streams on Paramount Plus Essential on May 25.
You can also watch CBS and the twelfth episode of Marshals without cable with a live TV streaming service such as YouTube TV, Hulu Plus Live TV or the DirecTV MyNews skinny bundle. In addition to offering a lower-cost option, Paramount Plus lets you watch the other three Yellowstone spinoffs: the prequels 1883 and 1923 and the sequel Dutton Ranch.
After a price increase in early 2026, the ad-supported Essential version runs $9 per month or $90 per year. The ad-free Premium version runs $14 per month or $140 per year. Paying more for Premium gives you downloads, the ability to watch more Showtime programming than Essential and access to your live, local CBS station.
Cisco is warning that a critical Catalyst SD-WAN Controller authentication bypass flaw, tracked as CVE-2026-20182, was actively exploited in zero-day attacks that allowed attackers to gain administrative privileges on compromised devices.
CVE-2026-20182 has a maximum severity of 10.0 and impacts Cisco Catalyst SD-WAN Controller and Cisco Catalyst SD-WAN Manager in on-prem and SD-WAN Cloud deployments.
In an advisory published today, Cisco said the issue stems from a peering authentication mechanism that “is not working properly.”
“This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system,” reads the Cisco CVE-2026-20182 advisory.
Advertisement
“A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric.”
Cisco Catalyst SD-WAN is a software-based networking platform that connects branch offices, data centers, and cloud environments through a centrally managed system. It uses a controller to securely route traffic between sites over encrypted connections.
The company says it detected threat actors exploiting the flaw in May, but did not share any details regarding how it was exploited.
However, shared indicators of compromise (IOCs) warn admins to check for unauthorized peering events in the SD-WAN Controller logs, which could indicate attempts to register rogue devices within the SD-WAN fabric.
Advertisement
By adding a rogue peer, an attacker could insert a malicious device into the SD-WAN environment that appears legitimate. That device could then establish encrypted connections and advertise networks under the attacker’s control, potentially allowing them to move deeper into an organization’s network.
The flaw was discovered by Rapid7 while researching a different Cisco SD-WAN controller vulnerability, tracked as CVE-2026-20127, which was fixed in February.
CVE-2026-20127 was also exploited in zero-day attacks by a threat actor tracked as “UAT-8616” since 2023 to create rogue peers in organizations.
Cisco has released security updates to address the vulnerability and says there are no workarounds that fully mitigate the issue.
Advertisement
The company also recommends restricting access to SD-WAN management and control-plane interfaces to trusted internal networks or to authorized IP addresses only, and reviewing authentication logs for suspicious login activity.
CISA has added the Cisco CVE-2026-20182 flaw to the Known Exploited Vulnerabilities Catalog, ordering federal agencies to patch affected devices by May 17, 2026.
Indicators of compromise
Cisco is urging organizations to review logs from any internet-exposed Catalyst SD-WAN Controller systems for events that may indicate unauthorized access or peering events.
The company says that admins should review /var/log/auth.log for entries showing “Accepted publickey for vmanage-admin” from unknown IP addresses:
Advertisement
2026-02-10T22:51:36+00:00 vm sshd[804]: Accepted publickey for vmanage-admin from port [REDACTED PORT] ssh2: RSA SHA256:[REDACTED KEY]
Administrators should compare IP addresses in logs with the configured System IPs listed in the Cisco Catalyst SD-WAN Manager web UI, under WebUI > Devices > System IP.
If an unknown IP address successfully authenticated, administrators should consider the device to be compromised and open a Cisco TAC case.
Cisco also recommends reviewing SD-WAN Controller logs for unauthorized peering activity, as attackers may attempt to register rogue devices within the SD-WAN fabric.
Cisco strongly recommends upgrading to a fixed software release, as this is the only way to fully remediate CVE-2026-20182.
Advertisement
Automated pentesting tools deliver real value, but they were built to answer one question: can an attacker move through the network? They were not built to test whether your controls block threats, your detection rules fire, or your cloud configs hold.
This guide covers the 6 surfaces you actually need to validate.
The Polar Street X gets some of the basics right, with a rugged design, solid sleep tracking and a useful built-in flashlight, but too much of the experience feels underdeveloped for the price, particularly its GPS accuracy, heart rate reliability and limited smartwatch features. While its distinctive G-Shock-style look may appeal to some, stronger battery life, navigation and overall value can be found in rival watches from Garmin, Coros and others.
Likeable G-Shock-style look
A good mix of sports tracking features
LED flashlight is nice and bright
Misses out on Polar’s latest sensor technology
Limited smartwatch features compared to competition
Desperately needs a better companion app
Key Features
Advertisement
Review Price:
£219
Rugged city-ready design
Advertisement
Built to military-standard durability, the Polar Street X pairs a tough G-Shock-style look with 50m water resistance and a bright LED flashlight.
Broad sports tracking
Advertisement
The Polar Street X tracks over 170 sports, from running and cycling to gym sessions, with useful extras like FitSpark and FuelWise.
Useful navigation tools
Advertisement
Alongside built-in GPS, the Polar Street X offers breadcrumb navigation, back-to-start guidance and turn-by-turn support for outdoor workouts.
Introduction
The Polar Street X is a multisports watch that Polar says is made for hybrid athletes and people who live, work and train in the city.
So what makes the Street X a perfect fit for city-dwelling fitness fans over other watches? It’s built to military-standard durability, can track over 170 sports, and includes a built-in flashlight to make nighttime outings easier.
Advertisement
The Street X is a new watch line for Polar, but did it need to make it? I’ve been putting it to the test for two weeks to find out.
Advertisement
Design and screen
Uses bioplastic for case and bezel
AMOLED touchscreen
Built-in LED flashlight
The Street X is what I’d describe as a mix of a Casio G-Shock and Garmin’s Instinct watch. It wraps up a 1.28-inch, 416 x 416 resolution AMOLED display in a plastic shell that’s nicely weighted and, as mentioned, has been tested to military standards for durability. That means strong protection against drops and bumps. It’s also waterproof up to 50 metres depth, like most other watches around this price.
Image Credit (Trusted Reviews)
It’s not as hulking as your typical G-Shock watch, with the 45mm case size sitting in between the 40mm-50mm sizes that you can grab Garmin’s similarly rugged Instinct in.
There are five physical buttons dotted around the case, all with a textured finish to improve interactions with sweaty hands or gloves. They’re good-sized buttons, if maybe a little too encased in that shock and weather-resistant frame. It can make using them in a rush a bit awkward.
Advertisement
Advertisement
Image Credit (Trusted Reviews)
At the top of the case is an LED flashlight, a trendy feature for sports watches and marks the first Polar watch to include one. The flashlight is activated by the top-left button, where you can also adjust brightness or switch to red light mode for a less distracting, better penetrating light. It’s a bright flashlight that was useful for nighttime runs and for getting around a room without needing to hit the light switch.
There’s a 22mm silicone strap that’s available in three different colours, with a sliding pin mechanism to release it from the watch case. I wouldn’t say it’s the most comfortable strap I’ve worn on a sports watch. It sits quite snug, which means it stays well in place, but there were also a couple of occasions when I felt I needed to take it off to give my wrist a break.
Image Credit (Trusted Reviews)
That strap can also be replaced with one of Polar’s payment-enabled straps, which will cost you an additional £51 and adds the ability to make contactless payments.
The AMOLED screen, which is protected from scratches with Gorilla Glass 3, is a perfectly good quality AMOLED with good colour accuracy and overall sharpness. You can adjust the screen brightness, though I found that even at maximum, it felt a little dull compared to other watches I’ve tested at this price point. The screen responsiveness, while generally fine, does seem to experience slight lag at times, causing it to float between menus and modes.
Advertisement
Image Credit (Trusted Reviews)
Performance and software
Works with Android and iOS
Works with Polar Flow app
Displays notifications and music playback controls
Like other Polar watches, the Street X runs on Polar’s in-house operating system and can be set up using either the Polar Flow phone app or the desktop app. I did the former, which is relatively straightforward, aside from having to update the watch out of the box. That took about 20 minutes to complete.
Image Credit (Trusted Reviews)
The Polar Flow app dearly needs some love. It’s a very text-heavy app where data and insights aren’t particularly glanceable, and it all just seems a bit dated. Things are better on the watch, where that array of physical buttons and touchscreen makes it easy to get around a pretty straightforward user interface.
Something Polar lacks compared to Garmin is a rich array of smartwatch features. You can change watch faces, and while there are some nice options to pick from, most of the faces aren’t that exciting or memorable. You do have the ability to control music playing on your phone with controls well optimised for the touchscreen display. You can also simply view phone notifications and view some nicely detailed weather forecasts.
Advertisement
Advertisement
Image Credit (Trusted Reviews)
While this watch can share data with third-party apps like Strava, Komoot and TrainingPeaks, when it comes to storing data on the watch, there’s just 32MB to play with.
As a smartwatch, Polar is behind the competition not only in features, but in the execution of those features.
Tracking and features
Over 170 sports modes
Misses out on dual-band GPS and newer Polar Elixir sensor
Breadcrumb navigation with turn-by-turn support
The Street X seems to have everything in its locker to be a very capable and competent multisports watch. It can track sports such as running, cycling, and swimming, as well as indoor workouts like strength and circuit training. It has built-in GPS, a heart rate monitor to track effort levels and the ability to help you find your way or your way back home on a run in a new location.
Image Credit (Trusted Reviews)
Advertisement
What it doesn’t do is give you the best that Polar has to offer on those hardware and software fronts. You’re getting a multi-GNSS setup for outdoor activity tracking, instead of a newer dual-band one. You miss out on Polar’s Elxir sensor, which means missing Polar’s latest heart rate sensor technology. That also means missing out on an ECG sensor and its latest skin temperature sensor technology. You also don’t get full offline maps to view your surroundings in greater detail, either.
Some of Polar’s standout software features do make it in. Like its useful FitSpark workout suggestions, with running, cycling and fitness tests along with Fuelwise fueling reminders. This is to help make sure you don’t crash during endurance-like training sessions due to a poor fueling strategy.
Advertisement
Image Credit (Trusted Reviews)
Let’s deal with the outdoor tracking performance first. While plenty of multi-GNSS-based watches can still serve up strong tracking results, the Street X isn’t a good example of that. Given that this is a watch designed for training in the city and doesn’t include dual-band technology to improve performance around tall buildings, this feature feels like an odd omission.
On most of my outdoor tests, the GPS performed fine, but I also had some bad moments on routes that I’ve tested other multi-GNSS watches on that have performed better.
Image Credit (Trusted Reviews)
Advertisement
The Precision Prime optical heart rate sensor technology is, unfortunately, not a fantastic performer all the time, as I’ve found on previous Polar watches that included it. On some sessions, like indoor bike rides, it matched up pretty well with graphs generated from a heart rate monitor. Average and maximum readings looked good, too.
There were also times when graphs and, particularly, maximum heart rate readings were off compared to a chest strap heart rate monitor. Thankfully, you do have the option to pair an external heart rate monitor to improve the accuracy of heart rate data during workouts.
Image Credit (Trusted Reviews)
Missing out on offline maps isn’t the worst thing here, as the breadcrumb navigation and features like back to start mode are effective enough in offering assistance when you’ve got a bit lost or need some guidance.
Sleep tracking is a strength for Polar’s ecosystem, and that remains true on the Street X. Whether that’s the recovery insights or Polar’s own take on telling you how ready you are to train, the core data underpinning those insights felt good enough to make those recommendations and guidance worth taking on board.
Advertisement
Image Credit (Trusted Reviews)
Advertisement
Battery life
Up to 10 days battery life
Up to 35 hours GPS battery life
Uses proprietary charging cradle
The Street X features a 385mAh capacity battery that Polar says can go up to 10 days without its proprietary charging cable. Features like continuous heart rate monitoring and keeping the screen on 24/7 will lower that number a bit.
Image Credit (Trusted Reviews)
I found that the average daily battery drop was around 10%. When I switched to using the always-on display mode, the battery was closer to 3 to 4 days. The battery dropped by around 5% within an hour of switching to that more power-hungry mode.
Polar also quotes a 35-hour battery for GPS battery life, which can be extended to 170 hours when you switch the watch into its eco training mode. This reduces heart rate tracking and samples GPS positioning data less frequently. An hour’s worth of GPS use saw the battery drop by 5%. That works out to 20 hours, which is short of the promised 35 hours.
Advertisement
Should you buy it?
You want a sports watch with a G-Shock-style look
Advertisement
The Polar Street X has a design that will certainly appeal to fans of the durable yet lightweight appearance associated with one of Casio’s most iconic watch lines.
Advertisement
You want the best mid-range sports watch and smartwatch
The mix of performance and level of features here means the Street X simply doesn’t match up to rival watches.
Advertisement
Final Thoughts
Polar has made a watch that struggles to justify its place in an already crowded mid-range sports watch market.
While the Street X gets some of the basics right, including a rugged design, solid sleep tracking and a useful built-in flashlight, too many parts of the overall experience feel undercooked for the price. GPS performance is inconsistent, heart rate tracking isn’t always reliable, and the software and smartwatch features lag behind key rivals.
That leaves the Street X in an awkward position. It looks distinctive and will appeal to anyone who wants a sports watch with a more durable, G-Shock-style aesthetic, but once you start comparing it to what Garmin, Coros and others offer for similar money, its shortcomings become much harder to ignore. Better battery life, stronger navigation features and a more polished smartwatch experience are all available elsewhere.
Ultimately, the Street X feels like a watch with a few good ideas that hasn’t been fully backed up by the performance, hardware or software needed to make it stand out. For loyal Polar fans, there may still be enough here to like, but for most people shopping around this price, there are better all-around options in our roundups of the best fitness trackers and best smartwatches.
Advertisement
How We Test
We thoroughly test every smartwatch we review. We use industry-standard testing to properly compare features, and we use the watch as our primary device throughout the review period. We’ll always tell you what we find, and we never accept money to review a product.
Worn as our main tracker during the testing period
Heart rate data compared against dedicated heart rate devices
FAQs
Does the Polar Street X sync with Strava?
Yes, the Polar Street X can sync data to Strava and also offers a dedicated Strava Live Segments mode for Strava Premium subscribers.
Can you make payments with the Polar Street X?
Advertisement
Yes, you can make contactless payments with the Street X. You will need to purchase the optional payment strap to enable it, as they’re not directly supported from the watch.
America’s Library of Congress “is preserving a little piece of Hell,” jokes Engadget, “by inducting the soundtrack to the original Doom into the National Recording Registry.”
The album of demon-slaying tracks is joined by several other notable 2026 additions to the registry, like Weezer’s self-titled debut album (colloquially known as “The Blue Album”), Taylor Swift’s “1989,” Beyonce’s “Single Ladies (Put a Ring On It) and the original “Mambo No. 5.”
“Doom” was created by Bobby Prince, a freelance composer who worked on lots of id Software games, and also scored Doom’s ’90s rival Duke Nukem 3D. The soundtrack draws clear inspiration from metal bands, but also touches on techno and ambient music throughout its track list, making for an eclectic soundscape for tearing through enemies. That it all fits together is also impressive in its own right: All of the music for Doom was written before the game had completed levels to play through, according to Prince. The official announcement from the Library of Congress says Doom “brought a heavy metal energy to MS-DOS systems across the globe,” while also pioneering first-person shooter videogames.
“Key to Doom’s popularity was the adrenaline-fueled soundtrack created by freelance video game music composer Bobby Prince. Prince, a lifelong musician and practicing lawyer, was fascinated by the MIDI technology that rose in prominence in the mid-1980s as a means for instrument control and composition… For “Doom,” Prince took inspiration from a pile of CDs loaned by the game’s chief designer, John Romero, including seminal works by Alice in Chains, Pantera and Metallica.
Advertisement
Despite the limitations of the 1993-era sound card drivers, Prince composed the perfect riff-shredding accompaniment for the game’s demon-slaying journey to hell and back. Taking advantage of his knowledge of MIDI, Prince even worked to ensure that the sound effects he created could cut through the music by assigning them to different MIDI frequencies.
AI can’t call on years of industry experience to fix a nuanced problem. It can’t demonstrate empathy over shared frustrations or build strong human connections. It won’t even laugh at your bad jokes unless you tell it to.
Despite the hype, AI can’t actually fill a human space.
Advertisement
However, for small business leaders, the choice often isn’t between a human and AI, it’s between doing everything yourself, or not doing it at all – this is where AI can really help.
But what does it actually take to build a digital department that emulates a $50k hire? In this article, I’ll line up everything in the tech stack you need to get started.
I’ve launched 4 successful businesses in the last 10 years, all whilst working a full time job. During this time I have been always been looking for smart ways to save time and money whilst getting more done. AI has totally changed how I run my current side hustles, here are some of the tools I swear by.
AI automation
You wouldn’t want to hire someone for $50k, only to have to explain over and over again how to do the same task.
Advertisement
So why would you want to do that with AI?
Automation is often overlooked by those looking to leverage AI. But continuously prompting your AI to do the same tasks chips away at your time.
Platforms like Google Gemini offer built-in automation tools that allow you to create one-off prompts that you can use again and again. For example, you may create a prompt that details your brand voice and preferred blog format, then you can feed a topic in whenever you want and let the AI create a blog post for you.
OpenClaw takes this one step further, allowing you to execute real-world tasks such as file management, browsing the internet, and sending emails. Where AI could previously only answer questions, with OpenClaw, it can execute commands. Although OpenClaw is free to use, you will need to host it, either on your own machine or through a managed hosting service like Hostinger.
Advertisement
A Stream Deck lets you connect automations to physical buttons that sit on your desk, helping you streamline common processes. For example, you may set up one button that automatically collects sales data from the last 30 days, populates it as a PDF, and emails it to you.
AI marketing
Marketing is an essential, yet time-consuming task for any small business. AI can take many of these tasks off your hands, whilst helping you to double down on what works.
Advertisement
By feeding an AI website builder a few prompts, you can get a purpose-built, fully populated website in just a few minutes. Although you will likely need to edit the AI’s output, you will still save considerable time when compared to building a website from scratch.
Canva AI works in a similar way for design. Describe what you want, whether that be an engaging social media post or a high-impact presentation, and let the AI do the work for you. Opus AI can be used to quickly turn long-term video into social media-optimized clips at the click of a button.
Vibe coding platforms like Hostinger Horizons offer a flexible way to build any web app. Small businesses on a budget can use them to create anything from CRMs to digital products.
Advertisement
AI admin
Using AI to take on admin tasks can be a massive time saver for small businesses.
Notion has been a popular workspace platform for small businesses for years, helping them store everything from leads and documents to project management plans and databases. In 2026, it introduced AI agents, that users can ask to do anything from lead vetting to customer outreach.
Zapier offers a range of platforms, ranging from marketing and sales to IT and customer support. Zapier’s AI agents help automate any process within its ecosystem of tools, allowing you to use AI platforms like ChatGPT and Gemini to orchestrate your business.
Advertisement
Note-taking is now a breeze thanks to AI. Investing in a voice or video + voice AI note taker will let you keep records of all meetings without the massive time drain of handwriting notes.
AMD’s gaming and graphics VP, Jack Huynh, recently confirmed that Radeon RX 7000 graphics cards will begin supporting FSR 4.1 this summer, with support for RX 6000 arriving in early 2027. The company’s presentation confirms what recent leaks indicated: the older GPUs will rely on INT8 processing, a slower alternative… Read Entire Article Source link
Sure, you can buy a portable monitor off your favorite e-tailer, but with perfectly fine displays in devices like laptops being tossed out every single day, why not repurpose those instead? That’s what [ScuffedBits] recently did with the panels pulled from some old laptops.
A good question with any such salvaged panel is just how practical it is to still use them, with disqualifying features being things like passive-matrix TFTs as well as the use of CCFL backlighting as with one of the three panels demonstrated in the video.
Looking up the model number of a panel on a site like panelook.com will tell you the display technology, resolution and other important details before you decide to commit to using it. If it’s using a LED backlight and at least Low-Voltage Differential Signaling (LVDS) but ideally eDP you can likely find a cheap driver board for it that has all the requisite inputs like HDMI and power.
Advertisement
The hardest part is probably the case for the panel, as they’re rather thin and fragile. Here [ScuffedBits] opted to 3D print two different types of cases, with the second variant probably being the best version as it protects most of the panel. Installing these is quite easy: slide the panel into the first half, then add the second half of the case to close it up. Permanently keeping the case in place was left as an exercise to a future [ScuffedBits], while demonstrating why it’s definitely the hardest part of repurposing an old laptop display.
You must be logged in to post a comment Login