Windows’ Classic 3D Space Cadet Pinball Is Getting a Physical Re-Creation

Hobbyist CNCDan is trying to build a real-world version of Windows’ classic 3D Pinball for Windows — Space Cadet, using 3D-printed flippers, bumpers, LEDs, slingshots, and a raised playfield modeled after the original virtual table. But in bringing the digital table into the real world, CNCDan has already run into several physical challenges the software never had to contend with… Ars Technica reports: After scaling and skewing the on-screen, perspective-shifted view of the Space Cadet playfield onto a 1-meter-tall table, he ended up with a rectangular playfield just 56 cm wide. That’s on the smaller side for commercial pinball tables and maps to playfield bumpers that are just 53 mm wide — way smaller than any prebuilt bumpers that are commercially available.

Once CNCDan dealt with issues with unreliable plastic microswitches for those tiny bumpers (Hall effect magnets seemed to help), he ran into a separate problem with the even smaller bumpers on the raised playfield. The wiring for those bumpers had to be arranged very carefully to avoid blocking a kickback return alley underneath, a positioning problem that the original designers of the virtual table didn’t have to consider at all. CNCDan also ended up adding a physical mechanism to simulate the short delay 3D Space Cadet players may remember, when the ball dropped down a hole from the raised playfield back to the flippers below.

CNCDan says he’s currently looking for artists to help him with a hand-drawn re-creation of the original Space Cadet playfield, which he doesn’t want to use AI for. “I’m sure [AI] can do it, but I’d much rather give this job to a real human being,” he said in the video.