Connect with us

Servers computers

Home made wall mounted 19-inch server / data / equipment rack cabinet. Perfect for a home network!

Published

on

Home made wall mounted 19-inch server / data / equipment rack cabinet.  Perfect for a home network!



Rather than buying a pre-made wall mount server data cabinet I decided to build one myself, custom designing it to fit a standard 19-inch network switch, power strip, patch panel, NAS (Network Attached Storage) drive, wireless WiFi access point, fibre broadband modem and the Hive central heating panel.

The unit itself is easy to make out of timber, I show you how I made it from a simple kitchen wall cabinet but alter it to fit the rack perfectly. It looks good on the wall (it looks much nicer than a metal data rack cabinet) and can be altered in the future if I feel the need to expand the unit.

The costs for a pre-built metal unit of this size is around £135.00, this one I have built cost just £39.00 – that’s a huge saving!

Rack contents include (I am not sponsored):
– TP Link TL-SG1024 Unmanaged 24-port Gigabit Ethernet Switch – Amazon
– LMS Data 6-gang Horizontal Power Distribution Unit (PDU) – Amazon
– Western Digital (WD) MyCloud EX2 Ultra NAS server – Maplin (before they went bust!)
– BT Smart Hub 2 – Gigabit Router and WiFi Access Point with 802.11ac Wireless
– Hive HomeHub – Central Heating / Water Control Panel with Remote Access
– OpenReach – Fibre-to-the-home Modem with 900 mbps connection

Advertisement

Please subscribe to my channel to see the next video – installing 22 Cat-6 network points around the house. .

source

Continue Reading
Advertisement
26 Comments

26 Comments

  1. @keistian4752

    September 30, 2024 at 6:52 pm

    What are the measurements of the whole rack?

  2. @Jonbuildz

    September 30, 2024 at 6:52 pm

    Being a techy It's nice mate, visually looks great.

  3. @maxwarren2852

    September 30, 2024 at 6:52 pm

    This looks great. When do you think the sequel will come out?

  4. @pitsnipe5559

    September 30, 2024 at 6:52 pm

    Nice, just built something similar for my home network using scrap lumber from previous projects.

  5. @arf20

    September 30, 2024 at 6:52 pm

    I need a 1000mm deep rack
    Servers don't fit in such a short cabinet

  6. @chilson88

    September 30, 2024 at 6:52 pm

    Well done, Your accent kept my full attention

  7. @Trotter152

    September 30, 2024 at 6:52 pm

    Nice work, appreciating it here from Jersey, New Jersey, USA.

  8. @zl0y

    September 30, 2024 at 6:52 pm

    Wooden box! 🤦

  9. @georgelza

    September 30, 2024 at 6:52 pm

    do you have a link for the rack (the silver, into which you screw the components) rails.

  10. @sko3225

    September 30, 2024 at 6:52 pm

    @5:55 talking about back-heavy, screwing in top screw first, of course. Tip: screwing in bottom ones first will force the rack-ears to the rails and hold them instead of trying to sheer off, friction is your friend! So is the principle of lever.

    Rack looks really nice with the colour accents, thanks for sharing.

  11. @siva29701

    September 30, 2024 at 6:52 pm

    Super fiitting & your equipment 👌

  12. @stanbaldwin7993

    September 30, 2024 at 6:52 pm

    Great video. I was looking for an idea to make my media room rack. Thanks!

  13. @jean-sebastienfrenette5169

    September 30, 2024 at 6:52 pm

    The only thing missing is actually heat exhaust. You have just one or two switch so not the biggest heat output but I wouldn't do that with servers and big switch, need room for air in front and back

  14. @crestonsimpson1370

    September 30, 2024 at 6:52 pm

    I think I would have added some rack mount fans.

  15. @andygg65

    September 30, 2024 at 6:52 pm

    How did you fix the Hive Hub and and BT Hub to the red accent panel? My hubs do not have any slot mounts for screws.

  16. @lorenzopardini6769

    September 30, 2024 at 6:52 pm

    Very good job! Suggestion: add labels to cables and power supply units

  17. @makeamillion

    September 30, 2024 at 6:52 pm

    Damn, thought it was a server rack build but well done.

  18. @ifohancroft

    September 30, 2024 at 6:52 pm

    By the way, mill is not the same as a millimeter. 1 mill is 1/1000th of an inch.

  19. @joshuacao

    September 30, 2024 at 6:52 pm

    Came here because my wife won’t let me leave the server rack exposed in the living room

  20. @samrahimi7521

    September 30, 2024 at 6:52 pm

    😂😂😂😂 you did not save £85 .. you lost a lot of time doing this
    BUT look’s good

  21. @manysaints

    September 30, 2024 at 6:52 pm

    It was a little flimsier than I expected. I had to add a 2×2 piece of wood to the bottom on the rear side in order to stabilize it better https://www.youtube.com/post/UgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.

  22. @jamesinbradford5882

    September 30, 2024 at 6:52 pm

    I’ve from Bradford , ever year I go to Cumbria for a week. Has soon has I leave Keighley I’m in a different world. Then a week later driving through Keighley towards Bradford I’m back in driving hell !

  23. @summerbee80

    September 30, 2024 at 6:52 pm

    Can you do an update on your home server please

  24. @TheDwight1379

    September 30, 2024 at 6:52 pm

    Did you move the ONT, or did they install to that corner?

  25. @LiLBitsDK

    September 30, 2024 at 6:52 pm

    that's a GIGANTIC case… for ONE switch… must admit I actually expected "something" in the rack…yes yes there are the stuff on the shelf below but that obviously didn't need a rack.

  26. @skynetnetworks

    September 30, 2024 at 6:52 pm

    A hidden cable pip that can open and a patch panel and ethernet outlet for the equipment below the cabinet

You must be logged in to post a comment Login

Leave a Reply

Servers computers

1U Server Rack Shelf – SHELF-1U-20-FIXED-S | StarTech.com

Published

on

1U Server Rack Shelf  - SHELF-1U-20-FIXED-S | StarTech.com



The SHELF-1U-20-FIXED-S lets you add a 1U 20 inches (50.8 cm) deep shelf to any EIA-310 compliant 19-inch rack or cabinet.

source

Continue Reading

Servers computers

Bolein 32U 600mm*600mm Floor Standing Network Server Rack Cabinet (Glass Door)

Published

on

Bolein 32U 600mm*600mm Floor Standing Network Server Rack Cabinet (Glass Door)



Bolein 32U 600mm*600mm free-standing DDF network rack enclosure server cabinet can be used in data centers, monitoring rooms, CCTV, and other places.
The front toughened glass door with a spring lock, side panels are removable, steel rear door with a round lock.
Assembled frame structure.
Cable entry and ventilation hole on top cover and bottom panel.
The main material is SPCC cold-rolled steel.
Mounting profile thickness is 2.0mm, mounting angle thickness is 1.5mm, others thickness is 1.2mm.
The degree of protection is IP20 and it can be customized.
Standard static loading capacity is 800 KG, and it can be increased to 1000 KG by adding auxiliary
mounting angle if need.
Adjustable feet and heavy-duty casters.
Cable manager, cooling fan, fixed shelf, sliding tray, patch panel, and other rack accessories are available.
If you are interested in it, you can contact us. We are also able to provide you the OEM racks.
Whatsapp: +8613467017439; Mobile/Wechat : +8617854120882; Skype: live:brenda123456fanhua; Email: sales3_cd@bolein.net; Site: www.bolein.net; bolein.en.alibaba.com

source

Continue Reading

Servers computers

Dell PowerEdge M820 Blade Server and M1000e Blade Enclosure Overview ( IT Creations, Inc )

Published

on

Dell PowerEdge M820 Blade Server and M1000e Blade Enclosure Overview ( IT Creations, Inc )



http://www.itcreations.com/
Phone: 1-800-983-5318
E-Mail: itcreationstv@gmail.com

This full height blade server boasts more processor cores, usable memory, and networking options than its predecessors. You’ll find that the M820 is a great choice for the largest demands in virtualization.

Film/Edited by: James Gage
Script by: David Kim / James Gage
Speaker: Chris Rodinis

Music:
Growing UP’ by Andrea Quarin
(www.melodyloops.com/tracks/growing-up/)Order #: 23615698474
Date: 2013-03-26
as Royalty Free Music under Creative Commons License CC BY-ND 3.0 (www.melodyloops.com/support/full-license/)
For more information contact Melody Loops at support@melodyloops.com .

source

Advertisement
Continue Reading

Servers computers

R750 2U Dual CPU Rack Server

Published

on

R750 2U Dual CPU Rack Server



We are YongChang GaoTai Company from China, who is the distributor of various brands, such as DELL, HPE, Lenovo, Inspur, …

source

Continue Reading

Servers computers

Dell 42U Server & Networking Rack

Published

on

Dell 42U Server & Networking Rack

source

Continue Reading

Servers computers

The Lenovo ThinkSystem SR670 V2 is a GPU-rich 3U rack server that supports eight double-wide GPUs.

Published

on

The Lenovo ThinkSystem SR670 V2 is a GPU-rich 3U rack server that supports eight double-wide GPUs.

source

Continue Reading

Trending

Copyright © 2024 WordupNews.com