Connect with us
DAPA Banner
DAPA Coin
DAPA
COIN PAYMENT ASSET
PRIVACY · BLOCKDAG · HOMOMORPHIC ENCRYPTION · RUST
ElGamal Encrypted MINE DAPA
🚫 GENESIS SOLD OUT
DAPAPAY COMING

Tech

SpaceX scrubs Starship launch with seconds to go

Published

on

Science

Not all bad news: Crypto billionaire signs up for a mission to Mars

SpaceX called off the launch of its huge Starship rocket seconds before liftoff due to a ground equipment problem.

The countdown clock reached a planned hold at T-40 seconds after a relatively trouble-free process. Some iffy weather had cleared, and everything looked good for the twelfth Starship test flight – the first try-out for the latest generation of the vehicle and launchpad.

Advertisement

Alas, it was not to be. After repeatedly resetting the countdown clock to the T-40 second mark due to problems, which included warnings from sensors on the quick-disconnect arm on the launch pad and issues with the pad’s water diverter, SpaceX eventually threw in the towel and scrubbed the launch.

Boss man Elon Musk blamed the scrub on the ground equipment, and posted on X: “The hydraulic pin holding the tower arm in place did not retract.” Musk wrote that if the issue could be fixed, SpaceX will try again later today. The next window opens at 5:30 pm CT, according to the billionaire.

Considering that this was the first launch attempt from a new pad and the first of this vehicle’s iteration, the countdown problems are unsurprising. As such, getting to the T-40 second mark was an achievement in its own right. Sadly, the team had only a few minutes to deal with the problems, since the propellant loading was complete and the fuel temperature could not be maintained for long.

Expectations are high for this mission. Despite years of development and Musk’s promises, Starship is still non-operational, and its launches remain on suborbital trajectories during its test phase. The vehicle has quite a way to go before it can play a part in NASA’s goal of landing a crew on the Moon.

Advertisement

According to the company’s recent IPO filing, “We expect Starship to commence payload delivery to orbit in the second half of 2026.”

The second half of 2026 is only weeks away, so it’ll be an interesting few months.

The IPO filing also states that Musk’s performance-based restricted shares in SpaceX vest upon the establishment of a permanent human colony on Mars “with at least one million inhabitants.”

First, however, the SpaceX needs to get to Mars. During the scrubbed launch attempt, it announced that crypto billionaire Chun Wang, who commanded the Fram2 private human spaceflight mission in 2025, would be on the crew for a future flyby of the red planet.

Advertisement

Hopefully, Wang’s jaunt to Mars won’t end up canceled like the dearMoon project, a mission to the Moon financed by Japanese billionaire Yusaku Maezawa. The project was unveiled in 2018, but was eventually canceled in 2024. Starship has yet to hit Earth orbit, let alone head to the Moon. ®

Source link

Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

Final Fantasy Resonance Rebuilds a Mobile Classic into the Franchise’s First HD-2D Console Game

Published

on

Final Fantasy Resonance Reveal
Square Enix surprised players during the June 9 Nintendo Direct with the reveal of Final Fantasy Resonance, the first entry in the long-running series to use the HD-2D art style. The game launches worldwide on October 22, 2026, for PlayStation 5, Xbox Series X and S, Nintendo Switch, Nintendo Switch 2, and PC through Steam and the Microsoft Store.



The normal version is priced at $49.99. If you’re ready to pay a little more, you can get the Digital Deluxe Edition for $59.99, which includes a bunch of useful in-game goodies. If you want to go all-in, the Collector’s Edition ($209.99) includes the base game, digital goodies, a physical artbook, the soundtrack, and a unique Final Fantasy Trading Card Game card.The plot revolves around Rain, a Grandshelt knight, his adoptive brother Lasswell, and the mysterious Fina as they work to defend the world’s crystals from Veritas of the Dark. Their adventure takes them all over the Lapis world, via villages, optional dungeons, and shrines that unlock additional Visions and some extremely cool memory cutscenes, all set in a big open overworld region that you may explore for free.


Nintendo Switch 2: Choose Your Game Bundle
  • Kick off the fun with a Nintendo Switch 2 system, your choice of a select digital game, and a savings* of up to $29.99!
  • Includes choice of either the Mario Kart World, Donkey Kong Bananza, or Pokémon Pokopia digital game download
  • One system, three play modes: TV, Tabletop, and Handheld


The story is based on the first major arc of the mobile game Final Fantasy Brave Exvius. Lancarse and Synthese have essentially recreated the entire thing from the ground up, rather than simply throwing it on a console and calling it good. The end result is a full-fledged console RPG that fits well into the series. When you need to travel, you can do so on foot, chocobo, or airship, and there are numerous destinations to visit across multiple continents.

Final Fantasy Resonance Screenshot
You’ll solve dungeon puzzles and complete side missions to help fill out the world. The transition from the mobile version’s node-based map to full-fledged open world movement gives the game a nice big Final Fantasy vibe without losing sight of the fundamental crystal conflict plot.

Final Fantasy Resonance Screenshot
Combat centers on a group of four, with a helpful timeline indicating when each character’s next move will happen. Do something big or make the right move, and you can move one of your characters’ turns a bit later down the line, so timing is essential. Each character has a Vision to use, which is a form of ghost fighter with strength from several Final Fantasy games, and these things level up on their own. The verified Visions include Warrior of Light, Terra, Cloud, Zidane, Shantotto, and Y’shtola, among others.

Final Fantasy Resonance Screenshot
Enemies have a stagger meter that fills up faster when you strike them where it counts. A fully staggered foe takes more damage and gives the party extra turns. When every enemy on the field staggers at once, the equipped Visions trigger a coordinated Resonance Attack shown in a short CG sequence. Fina can also call Espers for powerful summon moves, while Limit Bursts deliver big individual damage once the meter fills.

Final Fantasy Resonance Screenshot
The game also looks amazing, with realistic pixel sprites set against rich, layered backdrops that create a beautiful blend of old and new. Places feel deep and real, with proper lighting and shadow placement, and the overall experience makes you feel as if you’re actually there. The music has several familiar tracks from Brave Exvius as well as 33 brand new compositions created particularly for this game.
[Source]

Advertisement

Source link

Continue Reading

Tech

I‘ve had some awesome mobile mice in my time, but I can’t wait to travel with the Logitech Mobi Fold

Published

on


  • Logitech unveils a brand new folding mouse
  • The Mobil Fold is small and durable
  • It promises more than a month of battery life

I’ve had all manner of computer mice over the years, but by far my favorite is a travel mouse. They come in so many different shapes, sizes, and configurations. I fondly remember a promotional USB travel mouse, perhaps no bigger than my thumb, that featured a spring-loaded retractable cable. When that died after multiple road trips, I switched to a Microsoft Surface Arc Bluetooth travel mouse. It was darn near perfect. In travel mode, it was flat, and when you wanted to use it, you bent it to a perfect, palm-hugging curve. That one died after years of business travel.

So you can imagine my excitement when Logitech showed me its new Mobi Fold ($79.99 / $119.99CAD/€79.99 / £69.99). As the name suggests, it is a truly foldable Bluetooth travel mouse.

Source link

Advertisement
Continue Reading

Tech

The Patriot 4K UHD SteelBook Review: Mel Gibson’s Revolutionary War Epic Still Has Teeth

Published

on

After Independence Day, director Roland Emmerich and producer Dean Devlin could have easily kept feeding the multiplex more flag-waving alien carnage. Instead, with Robert Rodat’s Saving Private Ryan pedigree tempering the “U-S-A!” machinery, The Patriot became something more grounded, darker, and far better researched than anyone had reason to expect. It is still historical fiction with Hollywood fingerprints all over it, but compared to the glorious cheese fountain of ID4, this is a far more serious and satisfying story about American grit, personal loss, and the ugly cost of revolution.

Mel Gibson’s Benjamin Martin is not based on one specific individual but a composite of militia who fought so bravely to win our freedom from Great Britain some two-and-a-half centuries ago. As a veteran of the French and Indian War, specifically “the wilderness campaign,” he’s not only witnessed but perpetrated unspeakable horrors and is reluctant to see his people thrust into another bloody conflict. But when the war comes for him and his family, this expert in guerilla warfare answers the call and helps turn the tide. Beyond the relatively minor indignities such as the Tea Act Monopoly, the Stamp Act and the Writs of Assistance, we’re shown the atrocities visited upon the colonists by the British forces, a brutality born of arrogance, and it’s hard not to be invested in the struggle by the climactic battle.

5-the-patriot-movie-versions
My collection of The Patriot discs on DVD and Blu-ray.

A quick glance over my left shoulder at the shelf marked M through Z tells me that, damn, I must really like this movie. I’ve owned The Patriot on five different five-inch discs (see photo), and that was before Sony dropped its new and improved SteelBook 4K edition, once again serving up both the R-rated theatrical cut and the longer unrated version. On the 2018 UHD disc release, just the theatrical cut was in Atmos and 4K, but only in HDR10, with the unrated version in 1080p/5.1. This SteelBook set now offers both cuts each on its own BD-100 platter, in 4K, Dolby Vision and Dolby Atmos, with breathtaking cover artwork by Paul Shipper.

Say what you like about ol’ Mad Max here, but he is one intense thespian, and his closeups convey his grief, his conviction, and the inner demons that fuel Martin’s resolve. Not every shot is razor-sharp, but nonetheless it looks like we’re watching the Revolutionary War, the roll-up and the aftermath through an immaculate window. A light, consistent layer of film grain accentuates the 2.39:1 image, and the high dynamic range delivers consummate detail in the many period-authentic low-light scenes, illuminated by candles, fireplaces or campfires. Even the glisten of a brocaded epaulet is preserved. Whether through the use of filters, magic hour scheduling or post-production wizardry, Caleb Deschanel’s Oscar-nominated cinematography has an enticing golden glow, and the colors are significantly upgraded from the 2018 4K, with only the slightest perceptible drop in picture and sound quality at the inserts within the unrated cut.

Subtle LFE for hoofbeats and fireworks early in the story lull us into false resignation, until the realities of warfare are fully unleashed. Showoff scenes don’t come much better than Gabriel’s rescue–this is the one I routinely use to test speakers, in particular my surrounds and sub–conveniently located at the start of Chapter 5 on the theatrical version, 36:42 into the film. Our vantage point shifts frequently amid the chaos but the hard placement of off-camera voices keeps us in the middle of the action, with frequent booming gunshots all around. (I plan to watch it again after this review publishes, just because.) The whiz and impact of cannonballs are also outstanding. The active overhead channels bring a wonderful sense of spaciousness throughout, and dialogue scenes that proved challenging on past editions are now crystal-clear. The Patriot boasts a John Wiliams score, lesser-known despite its Oscar nomination, and it amplifies the excitement exponentially.

The extras are all ported from past editions, some dating back almost 26 years, spread across the two platters. The theatrical version carries an enjoyable Emmerich/Devlin audio commentary in addition to brisk featurettes about the production and the historical fact. Interestingly, the comprehensive deleted scenes section–13 minutes total with optional commentary–is located on the unrated disc, even though most of that footage has been integrated back into the movie to create the longer cut. Also on this disc are vignettes devoted to the visual effects and concept art.

Advertisement
patriot-4k-uhd-steelbook-case

The timing of the new The Patriot 4K SteelBook is curious, too late for Memorial Day and too early for The Fourth, but take it from me: This one would make a terrific Father’s Day gift. (Father’s Day feature incoming, but this one deserved its own review.) With top scores for the movie, audio and video, this one gets our highest recommendation.

Movie Details

  • STUDIO: Sony Pictures Home Entertainment
  • FORMAT: Ultra HD 4K Blu-ray (June 9, 2026)
  • THEATRICAL RELEASE YEAR: 2000
  • ASPECT RATIO: 2.39:1
  • HDR FORMATS: Dolby Vision, HDR10
  • AUDIO FORMAT: Dolby Atmos with TrueHD 7.1 core
  • LENGTH: 165/175 mins.
  • MPAA RATING: R/Unrated
  • DIRECTOR: Roland Emmerich
  • STARRING: Mel Gibson, Heath Ledger, Jason Isaacs, Chris Cooper, Tchéky Karyo, Joely Richardson

Our Ratings

★★★★★★★★★★ Movie

★★★★★★★★★★ Picture

★★★★★★★★★★ Sound

★★★★★★★★★★ Extras

Where to buy:

Advertisement. Scroll to continue reading.
Advertisement

Source link

Continue Reading

Tech

Report warns ‘potentially lethal’ knock-off phone chargers sold on Amazon Haul, B&Q and eBay can electrocute and even explode

Published

on


  • Which? discovers ‘potentially lethal’ phone chargers are being sold by major retailers
  • Cheap chargers pose serious risks of fire, electric shock and more
  • Consumer group demands stricter government regulation

British consumer watchdog Which? has revealed many of the third-party phone chargers available to consumers could present “potentially lethal” risks – and they’re often hidden in plain sight.

Nine of the 15 chargers tested by Which? posed serious electric shock risks, while eight also presented potential fire or explosion hazards, but more worryingly, many were available from popular and trustworthy high-street and online retailers like Amazon, B&Q and Debenhams.

Source link

Continue Reading

Tech

Rivian R2 First Drive Reveals Strong Performance and Genuine Off-Road Skills at an Attainable Price

Published

on

Rivian R2 First Drive
Rivian engineers took everything they learned from the larger R1 models and applied it to a vehicle sized for more people and more driveways. The result is the R2, a two-row electric SUV that starts well below sixty thousand dollars for loaded early versions and dips into the mid-forties for simpler single-motor models arriving next year. That pricing alone sets it apart from bigger adventure-focused rivals while still delivering real capability.



The body looks just like you’d expect from a car with a specific function, with no unnecessary frills and a nice, boxy form that declares its intent without being too huge for its own good. At 186 inches long, it’s around the size of a Honda CR-V in terms of footprint, but its stretched-out wheelbase makes it feel a little longer. The ground clearance is 9.6 inches, and the approach and departure angles are adequate for off-road adventures.

Sale


LEGO Speed Champions Mercedes-AMG G 63 & SL 63 Building Toys – Kids Pretend Play Toy Cars for Boys…
  • 2 Mercedes toy cars for kids – LEGO Speed Champions Mercedes-AMG G 63 & Mercedes-AMG SL 63 vehicle playset for boys and girls ages 10 and up and…
  • 2 driver minifigures – Each buildable vehicle toy comes with a driver minifigure wearing a Mercedes outfit so kids can role-play fast-paced races
  • Authentic Mercedes design – Each collectible car model features design details from the real life versions, including front grilles, hoods, wheels…

Stepping inside, you get the idea that the cabin is a huge open space with useful touches all over. The back seats provide ample leg and headroom and are exceptionally comfortable even on extended trips. The materials used are an excellent mix of nice everyday goods and some very smart eco-friendly choices, such as birch trim created from repurposed birch and a headliner built from ocean-rescued plastic. There are also spacious door pockets for holding water bottles, and the rear liftgate glass lowers to make loading heavier items easier.

Advertisement


The controls are one of the car’s most noticeable elements. There is a large, wide touchscreen that handles all of the normal features like as navigation, media, and vehicle settings, and it responds rapidly. You also get two huge halo dials on the steering wheel that allow you to change the climate, radio, drive modes, mirrors, and other settings with a few twists, pushes, pulls, or tilts. This strategy immediately became popular among reviewers, who considered it more user-friendly than scrolling menus while driving. One thing they needed was smartphone mirroring, but the native apps fulfill the most of your demands, and the interface is constantly updated with new features.


Under the hood, there’s an 88-kilowatt-hour battery and some extremely efficient motors. The top dual-motor Performance model generates 656 horsepower and accelerates to 60 mph in 3.6 seconds flat. Acceleration is powerful and immediate, but never uncomfortable. With 350 horsepower, the single-motor rear-wheel-drive car is a great option for people seeking for something a little more efficient. If you’re curious about how far you’ll get on a charge, the car’s range can reach 345 miles on the most efficient settings, thanks to its extraordinarily light weight (about 5,000 pounds) and sophisticated aerodynamic architecture that decreases the drag coefficient to 0.3.


Charging is quite speedy, with up to 230 kilowatts charging the battery from 10% to 80% in around 29 minutes under optimum conditions. You can also do bidirectional charging of up to 11 kilowatts, which allows you to power tools or even transmit electricity back to your home when the power goes out. Production of these things has already begun at Rivian’s plant in Normal, Illinois, with the intention of delivering the higher trims to clients this summer first.

Advertisement

Source link

Continue Reading

Tech

Re-Enable All Compute Units On The PS5-like BC-250 Cryptomining Card

Published

on

The custom APU at the core of Sony’s PlayStation 5 hasn’t just been quietly powering these game consoles, but also made their way onto cryptomining cards around 2023 which are called the BC-250. The APUs on these boards differ from the one found in the PS5 most notably by having two out of eight CPU cores disabled, along with many compute units (CUs) of the iGPU. Now apparently it seems that you can re-enable these CUs per instructions by [duggasco] if you’re feeling adventurous.

The BC-250's AMD APU in all its glory. (Credit: Lowest Logan, YouTube)
The BC-250’s AMD APU in all its glory. (Credit: Lowest Logan, YouTube)

As stated in the project’s README, BC-250 boards come with only 24 out of 40 CUs enabled, but this is not a permanent (e-fuse) thing. Instead you can write to two hardware registers during the GPU driver initialization, something which can be added to for example the Linux kernel module parameters.

Since many of these APUs likely had cores and CUs disabled due to them failing QA during PS5 APU manufacturing, there’s a good chance that some of the CUs truly are bad. Yet as we saw with the AMD Phenom II X3 with a supposedly bad fourth core back in the day, sometimes demand for the ‘defective’ part is high enough that good parts get mixed in as well.

Thus people like [Lowest Logan] decided to give it a shot, demonstrating the use of the patch with Bazzite Linux on a BC-250 system. After a reboot the system does indeed list 40 CUs as being enabled, and running Furmark shows a big boost in performance without any glitches or fire. There is of course thermal throttling, but that is due to the default cooling solution not being designed for running it at full blast.

Advertisement

Incidentally the real PS5 has only 36 active CUs, so this technically makes these unlocked APUs more powerful. With the water cooling solution demonstrated by [Lowest Logan] the thermal throttling is also resolved, showing that you can get a pretty nice gaming system out of these old cryptomining boards if you happen to win the silicon lottery.

Advertisement

Source link

Continue Reading

Tech

What Makes Edtech Work for Students [Infographic]

Published

on

Even the most well-intentioned edtech can fall short if it does not meet students where they are. After several years studying the usability of edtech for teachers, the research team at ISTE+ASCD turned its attention to students — examining how the technical and pedagogical design of digital tools shapes their learning experiences.

In partnership with In Tandem and Sesame Workshop, researchers spoke with high school students across the United States to understand how they actually use edtech in real learning contexts. The findings identify five areas that matter most to students and offer guidance for educators and product designers seeking tools that are intuitive, meaningful and engaging.

Click here to see the full infographic .

A full framework and guidance for edtech buyers and product providers will be released in 2026.

This article was sponsored by ISTE+ASCD and produced by the Solutions Studio team.

Source link

Advertisement
Continue Reading

Tech

Fingertip-Sized 1:150 Scale Matchbox Toyota ProBox You Can Actually Drive by Remote Control

Published

on

Mini Matchbox Toyota ProBox RC Car Micro
Diorama111 released a fresh build just days ago that shows what happens when extreme miniaturization meets real remote control hardware. He started with an ordinary KATO 1/150 scale Toyota ProBox, the kind of plastic model that sits on N-gauge train layouts or display shelves. Most builders stop at painting and weathering. He kept going until the little van could roll under its own power, steer on command, and light up properly in both directions.



The finished model is only a few centimeters long, but at true scale, it is roughly 150th the size of a real Toyota ProBox. The exterior still looks like it just came off the production line, but everything inside had to be modified just to fit. This entailed designing new parts, modifying old ones, or just building them from scratch to allow for movement and electronics to fit within. Power is supplied by a tiny lithium-polymer cell measuring 9 by 9 by 4 millimeters. It sits on top of a custom control board and provides power to the complete arrangement. The duration is purposefully brief, just long enough to test it on a tabletop or in a diorama before it needs to be recharged quickly via the underside connectors.

A DC motor in the back propels the vehicle, and watch gears are used to slow it down significantly, allowing it to move at a suitable rate for its size. A brass-bushed axle is used to reduce friction, resulting in smooth acceleration and excellent control at low speeds. As a result, when observed from above, it looks to be moving steadily rather than bouncing about haphazardly.

Mini Matchbox Toyota ProBox 1:150 Scale RC Car
Steering was a challenge because the conventional solution would not have worked. So a second DC motor was added to drive a lead screw, and a rod-and-linkage system was adapted to convert linear motion into front wheel spin. Two photoreflector sensors continuously monitor the motor shaft and screw, providing feedback to the controller so that it knows exactly where the wheels are and can give true proportional steering rather than just on/off. This all fits into the compact chassis, leaving room for the battery and receiver.

Mini Matchbox Toyota ProBox 1:150 Scale RC Car
The radio signal is sent via infrared because a small surface-mount IR receiver module is contained within the body. The matching handheld transmitter contains two analog joysticks that provide you independent control over the throttle and steering. It appears delicate enough to execute figure-eights, smooth turns, and faultless parking on a cutting mat. Lighting only adds to the illusion, with a few tiny surface-mount LEDs concealed beneath the headlight and taillight lenses. A hair-thin magnet wire runs through the roof and body, transferring power without adding mass. The headlights turn on as you go forward. When you change into reverse, the rear lights brighten. Direction sensing guarantees that the lights function in the same way as a full-size car does.

Mini Matchbox Toyota ProBox 1:150 Scale RC Car
Building this micro car required a great deal of patience because each stage required extreme focus. The interior was removed to provide way for the construction process, and each mechanical part had to be precisely positioned and tested before being altered repeatedly until everything fit together neatly while still leaving room for the batteries and cables. The underside of the chassis contains terminals for charging the battery and reprogramming the controller, making it possible to do so without disassembling anything.
[Source]

Source link

Advertisement
Continue Reading

Tech

This 4.4-Millimeter Robot Switches Between Five Surgical Tasks in Under a Second

Published

on

NTU 5-in-1 Surgical Micro Robot
NTU researchers spent seven years building a magnetic robot just 4.4 millimeters long. The compact machine performs five surgical functions through external control alone. It travels across soft tissue, cuts when required, dispenses medicine, gathers samples, and creates localized heat. Work on the project took place in the School of Mechanical and Aerospace Engineering under Associate Professor Lum Guo Zhan.



Nicholas Yong Wei Foo, a PhD student, led the project’s hands-on development. Alumni and regulars, including Dr. Chelsea Shan Xian Ng and Yu Xuan Yeoh, made substantial contributions during the design and testing phases. The researchers published their findings in Advanced Materials after being funded by NTU funds, A*STAR, and the NHG Health group. NTUitive has received a technology disclosure and is poised to proceed. Almost every other magnetic robot of this size can only perform one or two tricks; this one can perform five, owing to a programmable core module.

Sale


LEGO Icons Optimus Prime 10302 Transformers Figure Set, Collectible Transforming 2-in-1 Robot and Truck…
  • With this set, based on the legendary Transformers Autobot, adults build LEGO Optimus Prime figure that converts from robot to truck and back
  • Relive the Transformers saga with accessories, including the ion blaster, Autobot Matrix of Leadership, an Energon axe, Energon cube and jetpack
  • This unique collectible robot model makes a great home décor piece – top off the build with a unique display plaque with Optimus Prime facts

The module’s magnetic state can be changed with a few external coils; just magnetize, demagnetize, or reverse the direction, and each condition corresponds to a specific tool or action. The innovative aspect is that zones in the body are designed to only illuminate active areas while leaving the rest dark. According to tests, a complete flip takes less than a second. Getting around is the first trick, but it is far from the only one. This robot can crawl on soft, uneven ground that replicates surfaces found deep within the body. It can also rotate along its long axis, which is important for achieving perfect alignment when things become tight or the surface starts to slope and fold. There’s also a blade that pops out for cutting, and in lab tests, it effortlessly sliced through chicken liver and gelatin models, or at least models designed to imitate the inside of a human.

Advertisement

NTU 5-in-1 Surgical Micro Robot
When it comes to medicine delivery, the robot’s dispensing arm simulates drug delivery by using preloaded particles. The operator merely needs to maneuver it to the right spot and then press the release. The robot collects samples by utilizing a gripper to grab and secure tissue until it is ready for laboratory analysis. Test results showed that the gripper performed effectively on the models tested.

NTU 5-in-1 Surgical Micro Robot
Then there’s heat generation, which is a different magnetic process that warms up a small region by creating high-frequency alternating fields that force the particles inside to warm up. The idea is that this might be used for targeted therapy, raising the temperature in a specific area without damaging the surrounding tissue.

NTU 5-in-1 Surgical Micro Robot
The robot’s body is a clever combination of two flexible silicones, PDMS and Ecoflex, with magnetic particles that are barely five micrometers across. It has just enough give to bend and twist as needed while yet preserving enough shape to complete the task. Because there are no batteries, wires, or electronics inside the robot, all guidance and tool activation occurs from the outside. Because the robot is designed to be tiny and simple, all commands are given from the doctor’s control station.

Lab studies on actual biological samples showed that the design choices worked successfully. The robot completed all of the tasks on the samples, and subsequent tests comparing the materials to human skin cells found that more than 99% of the cells were still alive and active, which is optimistic for future development. According to Associate Professor Lum, most magnetic robots this size can only do one or two tasks.
[Source]

Source link

Advertisement
Continue Reading

Tech

The Digital Accessibility Deadline Is Here. Schools Aren’t Ready.

Published

on

A big civil rights deadline that impacts schools and vendors will hit this month.

Federal law has required accessibility for people with disabilities for decades, says Glenda Sims, chief information accessibility officer at Deque Systems, a company that specializes in digital accessibility.

But two years ago, the federal government finally gave schools a way to measure whether their websites, mobile apps and digital content were accessible under law when it released a “final rule.”

In essence, the final rule updated 2024 Title II of the Americans with Disabilities Act, a federal law concerning equal opportunity, setting out standards for public institutions around website and mobile app accessibility. When the deadline was put in place, disability experts told EdSurge that the rules provided clarity for schools and edtech vendors, and also set a ticking clock for when they would have to make changes. The rule set varying deadlines for school districts and state and local governments — in April 2026 or April 2027, based on population size.

Advertisement

On April 24, the first deadline will hit. By then, institutions have to make their web content and mobile apps comply with Level AA of the Web Content Accessibility Guidelines (WCAG) 2.1, a widely recognized accessibility standard that includes accommodations such as a minimum contrast ratio and a requirement for audio descriptions.

But with the well-advertised deadline just days away, schools are well behind schedule.

Some advocates worry that digital accessibility is being swept up in broader political trends. So, what happens when the deadline hits?

Not Ready for Prime Time

Only 14 percent of districts had completed the accessibility updates required by law, according to a survey from the National School Public Relations Association released last December. The survey also found fewer than half of districts prioritized digital accessibility or had procedures for vetting vendor accessibility, which is required by the rule.

Advertisement

It’s not just about course content, but also the apps that a school may use, says Sambhavi Chandrashekar, global accessibility lead at D2L, a company that runs a widely used learning management system. “I doubt if a single K-12 district in the U.S. or anywhere else has an inventory today of all the web apps and forms and content that they have that are not accessible,” Chandrashekar says.

NEWSLETTERS

STAY AHEAD IN EDUCATION.

Sign up for EdSurge newsletters for timely news, insights and analysis.

Figuring that out requires performing an audit, which most schools likely haven’t done and which can be expensive, she adds.

Advertisement

At EdSurge’s request, AAAtraq, a company that sells disability-related legal compliance services, surveyed around 20 of the largest schools across a number of states — in California, Colorado, Florida, Illinois, New York, Texas and Washington state. Many school websites and online PDFs failed along “basic accessibility fundamentals,” based on a benchmark the company uses to assess legal exposure. Alt text was missing, there was not enough color contrast and many websites didn’t have an accessibility statement, the company reports. The company found that 88 percent received an “F,” the lowest possible grade.

The company uses AI in its assessments, which do not cover all of the WCAG technical guidelines, and its assessment was meant only as rough barometer. In some cases, the use of AI in accessibility is controversial.

“Title II should have been a wake up call,” said AAAtraq CEO Lawrence Shaw in an emailed comment, referring to the major disability law behind the “final rule.” Yet many schools, including some of the largest in the country, have left themselves open to legal action.

Digital Exhaustion

Schools’ relationship to technology has also changed since two years ago, from rushing to embrace it to trying to limit it.

Advertisement

These days, beset by digital exhaustion and regret over the reach of tech into children’s lives, schools have sought to restrict screens in schools.

But it’s important for schools and lawmakers to distinguish between meaningful tech and doomscrolling on social media, says Luis Pérez, senior director of disability and accessibility for CAST, a digital access advocacy group. Students are under more pressure to manage their own attention, Pérez says, but those with disabilities and multilingual learners rely on certain digital tools, such as text-to-speech and adjustable text sizing to navigate daily learning. When used correctly, digital tools that expand accessibility can foster a sense of belonging, especially for underrepresented groups.

He worries that screen time laws that lump all screens together could make digital accessibility harder.

K-12 schools may be having the toughest time. Universities are usually more prepared for digital accessibility than state or local governments, which run K-12 public schools, says Sims of Deque. That’s partly because students with disabilities represent a more identifiable group in universities and that allows them to advocate for accommodation, she says.

Advertisement

These schools are heavily reliant on vendors for accessibility, Sims says.

It doesn’t help that there’s uncertainty at the moment.

Old Rules, New Rulers

While the accessibility deadline is still in place, the intentions of the federal government have become murky.

Last year, the Department of Justice signaled that it might issue a new “interim final rule” that would impact the deadline. And recently, the Office of Information and Regulatory Affairs — a federal agency that is usually not involved with accessibility — has been holding meetings on the rule, as “credible rumors” have circulated that the rule is in danger of getting delayed or scrapped.

Advertisement

Yet, the federal government has not publicly released information about its intentions, according to Jarret Cummings, senior adviser for policy and public relations at Educause.

The Office of Information and Regulatory Affairs did not immediately respond to a question from EdSurge about whether a delay is expected.

However, some documents related to the meetings are publicly accessible, giving a glimpse into what they are hearing.

A group representing more than 800 Minnesota cities argued in written testimony that none of the Minnesota cities that would be impacted by the rule are fully compliant with the law. The letter states that the cost of compliance would squeeze small government budgets. In a similar argument, testimony from the National Association of Counties estimated that it would cost small counties about $32,000 to fix problems with accessibility on their sites, and large counties as much as $700,000.

Advertisement

Cummings’ organization, Educause, has also argued that two years was not enough time for most higher-ed institutions to make changes. It suggested that the government alter the timeline.

In contrast, Mark Riccobono, president of the National Federation of the Blind, testified that the rulemaking process has been ongoing for decades, with ample time for comment. The bill represents a compromise that clarifies rules, while reducing the burden of those under the law by providing exceptions and generous timelines, Riccobono argued.

Politically, the national mood has changed since the rule was issued a couple of years ago.

The affiliation of accessibility with diversity, equity and inclusion has politically backfired under the Trump administration. The administration has shredded grants it has identified with “radical” DEI ideology, and mass firings have gutted agencies like the Education Department, which the administration is actively trying to dismantle.

Advertisement

For students with disabilities, it means that there’s no guarantee of federal support, even when a federal complaint is filed.

“I would say that so many of the places that were reasonably staffed… have been reduced to almost bare bones, nothing. And so even if there are complaints coming in, there’s no way to truly handle them,” says Sims, of Deque.

Indeed, mass firings have led to 90 percent of all student civil rights complaints, including from students with disabilities, being dismissed by the federal government in the second half of last year, according to a nonpartisan government watchdog report published in January.

In the absence of federal help, people with disabilities have turned to the courts. There were more than 3,000 accessibility lawsuits filed in federal court last year, according to legal analysis of court data.

Advertisement

Long-term Goals

Pérez of CAST maintains that advocates should keep on track, focusing on long-term strategy, no matter what happens at the federal level. Accessibility benefits everyone, regardless of their background or disability status, he says.

Sims, of Deque, has also made a “business case” for considering accessibility during the design of products, suggesting that as schools embrace accessibility, the vendors that can show they build accessibility into their products will be rewarded.

Some hope that artificial intelligence tools will help students with disabilities access information on their own, and point toward tools like Aira, an AI tool that aids in remote video interpretation for people with visual impairment.

But even there, disability law experts insist that the federal rule hasn’t actually changed. “The rule is the rule until it isn’t,” wrote Lainey Feingold in early March.

Advertisement

Source link

Continue Reading

Trending

Copyright © 2025