Connect with us

Tech

FLASH Radiotherapy’s Bold Approach to Cancer Treatment

Published

on

Inside a cavernous hall at the Swiss-French border, the air hums with high voltage and possibility. From his perch on the wraparound observation deck, physicist Walter Wuensch surveys a multimillion-dollar array of accelerating cavities, klystrons, modulators, and pulse compressors—hardware being readied to drive a new generation of linear particle accelerators.

Wuensch has spent decades working with these machines to crack the deepest mysteries of the universe. Now he and his colleagues are aiming at a new target: cancer. Here at CERN (the European Organization for Nuclear Research) and other particle-physics labs, scientists and engineers are applying the tools of fundamental physics to develop a technique called FLASH radiotherapy that offers a radical and counterintuitive vision for treating the disease.

Photo of a white-haired man standing next to floor-to-ceiling experimental equipment with many tubes and wires. CERN researcher Walter Wuensch says the particle physics lab’s work on FLASH radiotherapy is “generating a lot of excitement.”CERN

Radiation therapy has been a cornerstone of cancer treatment since shortly after Wilhelm Conrad Röntgen discovered X-rays in 1895. Today, more than half of all cancer patients receive it as part of their care, typically in relatively low doses of X-rays delivered over dozens of sessions. Although this approach often kills the tumor, it also wreaks havoc on nearby healthy tissue. Even with modern precision targeting, the potential for collateral damage limits how much radiation doctors can safely deliver.

FLASH radiotherapy flips the conventional approach on its head, delivering a single dose of ultrahigh-power radiation in a burst that typically lasts less than one-tenth of a second. In study after study, this technique causes significantly less injury to normal tissue than conventional radiation does, without compromising its antitumor effect.

Advertisement

At CERN, which I visited last July, the approach is being tested and refined on accelerators that were never intended for medicine. If ongoing experiments here and around the world continue to bear out results, FLASH could transform radiotherapy—delivering stronger treatments, fewer side effects, and broader access to lifesaving care.

“It’s generating a lot of excitement,” says Wuensch, a researcher at CERN’s Linear Electron Accelerator for Research (CLEAR) facility. “We accelerator people are thinking, Oh, wow, here’s an application of our technology that has a societal impact which is more immediate than most high-energy physics.”

The Unlikely Birth of FLASH Therapy

The breakthrough that led to FLASH emerged from a line of experiments that began in the 1990s at Institut Curie in Orsay, near Paris. Researcher Vincent Favaudon was using a low-energy electron accelerator to study radiation chemistry. Targeting the accelerator at mouse lungs, Favaudon expected the radiation to produce scar tissue, or fibrosis. But when he exposed the lungs to ultrafast blasts of radiation, at doses a thousand times as high as what’s used in conventional radiation therapy, the expected fibrosis never appeared.

Puzzled, Favaudon turned to Marie-Catherine Vozenin, a radiation biologist at Curie who specialized in radiation-induced fibrosis. “When I looked at the slides, there was indeed no fibrosis, which was very, very surprising for this type of dose,” recalls Vozenin, who now works at Geneva University Hospitals, in Switzerland.

Advertisement

The pair expanded the experiments to include cancerous tumors. The results upended a long-held trade-off of radiotherapy: the idea that you can’t destroy a tumor without also damaging the host. “This differential effect is really what we want in radiation oncology, not damaging normal tissue but killing the tumors,” Vozenin says.

They repeated the protocol across different types of tissue and tumors. By 2014, they had gathered enough evidence to publish their findings in Science Translational Medicine. Their experiments confirmed that delivering an ultrahigh dose of 10 gray or more in less than a tenth of a second could eradicate tumors in mice while leaving surrounding healthy tissue virtually unharmed. For comparison, a typical chest X-ray delivers about 0.1 milligray, while a session of conventional radiation therapy might deliver a total of about 2 gray per day. (The authors called the effect “FLASH” because of the quick, high doses involved, but it’s not an acronym.)

Three sets of images comparing highly magnified tissue samples.

Although many cancer experts were skeptical about the FLASH effect on healthy tissue when it was first announced in 2014, numerous studies have since confirmed and expanded on those results. In a 2020 paper, a lung tissue sample taken 4 months after being exposed to conventional radiotherapy [center] shows many more dark spots indicating scarring than a sample exposed to FLASH [right]. The nonirradiated sample [left] is the control.

Advertisement

Vincent Favaudon/American Association for Cancer Research

Many cancer experts were skeptical. The FLASH effect seemed almost too good to be true. “It didn’t get a lot of traction at first,” recalls Billy Loo, a Stanford radiation oncologist specializing in lung cancer. “They described a phenomenon that ran counter to decades of established radiobiology dogma.”

But in the years since then, researchers have observed the effect across a wide range of tumor types and animals—beyond mice to zebra fish, fruit flies, and even a few human subjects, with the same protective effect in the brain, lungs, skin, muscle, heart, and bone.

Why this happens remains a mystery. “We have investigated a lot of hypotheses, and all of them have been wrong,” says Vozenin. Currently, the most plausible theory emerging from her team’s research points to metabolism: Healthy and cancerous cells may process reactive oxygen species—unstable oxygen-containing molecules generated during radiation—in very different ways.

Advertisement

Adapting Accelerators for FLASH

At the time of the first FLASH publication, Loo and his team at Stanford were also focused on dramatically speeding up radiation delivery. But Loo wasn’t chasing a radiobiological breakthrough. He was trying to solve a different problem: motion.

“The tumors that we treat are always moving targets,” he says. “That’s particularly true in the lung, where because of breathing motion, the tumors are constantly moving.”

To bring FLASH therapy out of the lab and into clinical use, researchers like Vozenin and Loo needed machines capable of delivering fast, high doses with pinpoint precision deep inside the body. Most early studies relied on low-energy electron beams like Favaudon’s 4.5-megaelectron-volt Kinetron—sufficient for surface tumors, but unable to reach more than a few centimeters into a human body. Treating deep-seated cancers in the lung, brain, or abdomen would require far higher particle energies.

Photo of floor-to-ceiling electromagnetic hardware with many tubes and pipes, some of which is copper-colored.

At CERN, researchers working on FLASH are developing this hardware to boost electrons to ultrahigh power within a short distance.

Advertisement

CERN

They also needed an alternative to conventional X-rays. In a clinical linac, X-ray photons are produced by dumping high-energy electrons into a bremsstrahlung target, which is made of a material with a high atomic number, like tungsten or copper. The target slows the electrons, converting their kinetic energy into X-ray photons. It’s an inherently inefficient process that wastes most of the beam power as heat and makes it extremely difficult to reach the ultrahigh dose rates required for FLASH. High-energy electrons, by contrast, can be switched on and off within milliseconds. And because they have a charge and can be steered by magnets, electrons can be precisely guided to reach tumors deep within the body. (Researchers are also investigating protons and carbon ions; see the sidebar, “What’s the Best Particle for FLASH Therapy?”)

Loo turned to the SLAC National Accelerator Laboratory in Menlo Park, Calif., where physicist Sami Gamal-Eldin Tantawi was redefining how electromagnetic waves move through linear accelerators. Tantawi’s findings allowed scientists to precisely control how energy is delivered to particles—paving the way for compact, efficient, and finely tunable machines. It was exactly the kind of technology FLASH therapy would need to target tumors deep inside the body.

Advertisement

Meanwhile, Vozenin and other European researchers turned to CERN, best known for its 27-kilometer Large Hadron Collider (LHC) and the 2012 discovery of the Higgs boson, the “God particle” that gives other particles their mass.

CERN is also home to a range of smaller linear accelerators—including CLEAR, where Wuensch and his team are adapting high-energy physics tools for medicine.

Unlike the LHC, which loops particles around a massive ring to build up energy before smashing them together, linear accelerators like CLEAR send particles along a straight, one-time path. That setup allows for greater precision and compactness, making it ideal for applications like FLASH.

Advertisement

At the heart of the CLEAR facility, Wuensch points out the 200-MeV linear accelerator with its 20-meter beamline. This is “a playground of creativity,” he says, for the physicists and engineers who arrive from all over the world to run experiments.

The process begins when a laser pulse hits a photocathode, releasing a burst of electrons that form the initial beam. These electrons travel through a series of precisely machined copper cavities, where high-frequency microwaves push them forward. The electrons then move through a network of magnets, monitors, and focusing elements that shape and steer them toward the experimental target with submillimeter precision.

Instead of a continuous stream, the electron beam is divided into nanosecond-long bunches—billions of electrons riding the radio-frequency field like surfers. Inside the accelerator’s cavities, the field flips polarity 12 billion times per second, so timing is everything: Only electrons that arrive perfectly in phase with the accelerating wave will gain energy. That process repeats through a chain of cavities, each giving the bunches another push, until the beam reaches its final energy of 200 MeV.

Close-up photo of an etched copper disc being held under a microscope by a gloved hand.

Physicist Marçà Boronat inspects one of the high-precision components used to accelerate the electrons for FLASH radiotherapy.

Advertisement

CERN

Much of this architecture draws directly from the Compact Linear Collider study, a decades-long CERN project aimed at building a next-generation collider. The proposed CLIC machine would stretch 11 kilometers and collide electrons and positrons at 380 gigaelectron volts. To do that in a linear configuration—without the multiple passes around a ring like the LHC—CERN engineers have had to push for extremely high acceleration gradients to boost the electrons to high energies over relatively short distances—up to 100 megavolts per meter.

Wuensch leads me to a large experimental hall housing prototype structures from the CLIC effort, and points out the microwave devices that now help drive FLASH research. Though the future of CLIC as a collider remains uncertain, its infrastructure is already yielding dividends: smaller, high-gradient accelerators that may one day be as suited for curing cancer as they are for smashing particles.

Advertisement

The power behind the high gradients comes from CERN’s Xboxes, the X-band RF systems that dominate the experimental hall. Each Xbox houses a klystron, modulator, pulse compressor, and waveguide network to generate and shape the microwave pulses. The pulse compressors store energy in resonant cavities and then release it in a microsecond burst, producing peaks of up to 200 megawatts; if it were continuous, that’s enough to power at least 40,000 homes. The Xboxes let researchers fine-tune the power, timing, and pulse shape.

According to Wuensch, many of the recent accelerator developments were enabled by advances in computer simulation and high-precision three-dimensional machining. These tools allow the team to iterate quickly, designing new accelerator components and improving beam control with each generation.

Still, real-world challenges remain. The power demands are formidable, as are the space requirements; for all the talk of its “compact” design, the original CLIC was meant to span kilometers. Obviously, a hospital needs something that’s actually compact.

Advertisement

“A big challenge of the project,” says Wuensch, “is to transform this kind of technology and these kinds of components into something that you can imagine installing in a hospital, and it will run every day reliably.”

To that end, CERN researchers have teamed up with the Lausanne University Hospital (known by its French acronym, CHUV) and the French medical technology company Theryq to design a hospital facility capable of treating large and deep-seated tumors with the very short time scales needed for FLASH and scaled down to fit in a clinical setting.

Theryq’s Approach to FLASH

Theryq’s research center and factory are located in southern France, near the base of Montagne Sainte-Victoire, a jagged spine of limestone that Paul Cézanne painted dozens of times, capturing its shifting light and form.

“The solution that we are trying to develop here is something which is extremely versatile,” says Ludovic Le Meunier, CEO of the expanding company. “The ultimate goal is to be able to treat any solid tumor anywhere in the body, which is about 90 percent of the cancer these days.”

Advertisement

Futuristic scientific equipment setup, featuring streamlined machinery and intricate components. Theryq’s FLASHDEEP system, under development with CERN and the company’s clinical partners, has a 13.5-meter-long, 140-MeV linear accelerator. That’s strong enough to treat tumors at depths of up to about 20 centimeters in the body. The patient will remain in a supported standing position during the split-second irradiation.THERYQ

Theryq’s push to bring FLASH radiotherapy from the lab to clinic has followed a three-pronged rollout, with each device engineered for a specific depth and clinical use. The first machine, FLASHKNiFE, was unveiled in 2020. Designed for superficial tumors and intraoperative use, the system delivers electron beams at 6 or 9 MeV. A prototype installed that same year at CHUV is conducting a phase-two trial for patients with localized skin cancer.

More recently, Theryq launched FLASHLAB, a compact, 7-MeV platform for radiobiology research.

The company’s most ambitious system, FLASHDEEP, is still under development. The 13.5-meter-long electron source will deliver very high-energy electrons of as much as 140 MeV up to 20 centimeters inside the body in less than 100 milliseconds. An integrated CT scanner, built into a patient-positioning system developed by Leo Cancer Care, captures images that stream directly into the treatment-planning software, enabling precise calculation of the radiation dose. “Before we actually trigger the beam or the treatment, we make stereo images to verify at the very last second that the tumor is exactly where it should be,” says Theryq technical manager Philippe Liger.

FLASH Therapy Moves to Animal Tests

While CERN’s CLEAR accelerator has been instrumental in characterizing FLASH parameters, researchers seeking to study FLASH in living organisms must look elsewhere: CERN doesn’t allow animal experiments on-site. That’s one reason why a growing number of scientists are turning to PITZ, the Photo Injector Test Facility in Zeuthen, a leafy lakeside suburb of Berlin.

Advertisement

PITZ is part of Germany’s national accelerator lab and is responsible for developing the electron source for the European X-ray Free-Electron Laser. Now PITZ is emerging as a hub for FLASH research, with an unusually tunable accelerator and a dedicated biomedical lab to ensure controlled conditions for preclinical studies.

A photo showing a row of experimental electronic equipment on racks

A photo of a closeup of a gloved hand holding a sample of a purple liquid above a piece of equipment. At Germany’s Photo Injector Test Facility in Zeuthen (PITZ), the electron-beam accelerator [top] is used to irradiate biological targets in early-stage animal tests of FLASH radiotherapy [bottom].Top: Frieder Mueller; Bottom: MWFK

“The biggest advantage of our facility is that we can do a very stepwise, very defined and systematic study of dose rates,” says Anna Grebinyk, a biochemist who heads the new biomedical lab, “and systematically optimize the FLASH effect to see where it gets the best properties.”

The experiments begin with zebra-fish embryos, prized for early-stage studies because they’re transparent and develop rapidly. After the embryos, researchers test the most promising parameters in mice. To do that, the PITZ team uses a small-animal radiation research platform, complete with CT imaging and a robotic positioning system adapted from CERN’s CLEAR facility.

What sets PITZ apart is the flexibility of its beamline. The 30-meter accelerator system steers electrons with micrometer precision, producing electron bunches with exceptional brightness and emittance—a metric of beam quality. “We can dial in any distribution of bunches we want,” says Frank Stephan, group leader at PITZ. “That gives us tremendous control over time structure.”

Advertisement

Timing matters. At PITZ, the laser-struck photocathode generates electron bunches that are accelerated immediately, at up to 60 million volts per meter. A fast electromagnetic kicker system acts as a high-speed gatekeeper, selectively deflecting individual electron bunches from a high-repetition beam and steering them according to researchers’ needs. This precise, bunch-by-bunch control is essential for fine-tuning beam properties for FLASH experiments and other radiation therapy studies.

“The idea is to make the complete treatment within one millisecond,” says Stephan. “But of course, you have to [trust] that within this millisecond, everything works fine. There is not a chance to stop [during] this millisecond. It has to work.”

Regulating the dose remains one of the biggest technical hurdles in FLASH. The ionization chambers used in standard radiotherapy can’t respond accurately when dose rates spike hundreds of times higher in a matter of microseconds. So researchers are developing new detector systems to precisely measure these bursts and keep pace with the extreme speed of FLASH delivery.

FLASH as a Research Tool

Beyond its therapeutic potential, FLASH may also open new windows to illuminate cancer biology. “What is really, really superinteresting, in my opinion,” says Vozenin, “is that we can use FLASH as a tool to understand the difference between normal tissue and tumors. There must be something we’re not aware of that really distinguishes the two—and FLASH can help us find it.” Identifying those differences, she says, could lead to entirely new interventions, not just with radiation, but also with drugs.

Advertisement

Vozenin’s team is currently testing a hypothesis involving long-lived proteins present in healthy tissue but absent in tumors. If those proteins prove to be key, she says, “we’re going to find a way to manipulate them—and perhaps reverse the phenomenon, even [turn] a tumor back into a normal tissue.”

Proponents of FLASH believe it could help close the cancer care gap worldwide; in low-income countries, only about 10 percent of patients have access to radiotherapy, and in middle-income countries, only about 60 percent of patients do, according to the International Atomic Energy Agency. Because FLASH treatment can often be delivered in a single brief session, it could spare patients from traveling long distances for weeks of treatment and allow clinics to treat many more people.

High-income countries stand to benefit as well. Fewer sessions mean lower costs, less strain on radiotherapy facilities, and fewer side effects and disruptions for patients.

The big question now is, How long will it take? Researchers I spoke with estimate that FLASH could become a routine clinical option in about 10 years—after the completion of remaining preclinical studies and multiphase human trials, and as machines become more compact, affordable, and efficient. Much of the momentum comes from a growing field of startups competing to build devices, but the broader scientific community remains remarkably open and collaborative.

Advertisement

“Everyone has a relative who knows about cancer because of their own experience,” says Stephan. “My mother died of it. In the end, we want to do something good for mankind. That’s why people work together.”

This article appears in the March 2026 print issue.

From Your Site Articles

Related Articles Around the Web

Advertisement

Source link

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tech

One Sailing Pulley To Rule Them All

Published

on

When thinking of humanity’s ability to harness wind energy, many people will conjure images of windmills from places like The Netherlands or Persia. But people have been using wind energy for far longer than that in the form of sailing ships. Using the wind for transportation goes back another four thousand years or so, but despite our vast experience navigating the seas with wind alone there is still some room for improvement. Many modern sailboats use a number of different pulleys to manage all of the rigging, but this new, open-source pulley can replace many of them.

The pulley, or “block” as they are sometimes called, is built with a polymer roller made out of a type of nylon, which has the benefit of being extremely durable and self-lubricating but is a bit expensive. Durability and lack of squeakiness is important in sailing applications, though. The body is made from CNC-machined aluminum and is composed of two parts, which pivot around the pulley’s axis to allow various ropes (or “lines”) to be inserted without freeing one end of the rope. In testing, this design outperformed some proprietary stainless steel pulleys of similar size.

Another perk of this design is that it can be set up to work in many different applications on a sailboat, whether that’s for hoisting a mainsail or pulling in a jib or any other task a pulley could be used for. It can also be stacked with others in many different configurations to build custom pulleys of almost any type, and can support up to 14 mm lines. For a sailor this could be extremely valuable, because as it stands each pulley on a ship tends to be used in only certain applications, and might also be proprietary from a specific company. This pulley is being released into the open-source world, allowing anyone to create them who wants one.

Advertisement

Thanks to [Keith] for the tip!

Advertisement

Source link

Continue Reading

Tech

Seagate is now shipping HAMR disk drives holding up to 44TB of data

Published

on


Seagate introduced the Mozaic 3+ platform in 2024, turning the heat-assisted magnetic recording (HAMR) dream into a real product for customers in need of massive storage capacities. The HDD maker is now introducing the next-generation Mozaic 4+ drives, which offer capacities up to 44TB.
Read Entire Article
Source link

Continue Reading

Tech

Apple thinks it can lure in the 'Apple curious' for $599

Published

on

Apple has made it pretty clear that it wants to siphon off Android and Windows users, and it’s doing it by adopting an aggressive, “budget-friendlier” model across nearly its entire ecosystem.

Large bold blue price text reading $599 with layered rainbow-colored shadows on a solid black background
Apple is using $599 devices to grow its ecosystem

When I first entered the Apple ecosystem, it was when I bought an iPhone 4 in 2011 — I got it right after the 4s made its debut. I don’t remember exactly what I paid, but I know it was less than the initial $199 price tag.
And back then, I thought that was a completely asinine amount of money to pay for a phone. Fortunately, or maybe unfortunately, I had more money in my pocket than brains in my head, so I bought it just the same.
Continue Reading on AppleInsider | Discuss on our Forums

Source link

Continue Reading

Tech

Anthropic will fight US ‘supply chain risk’ designation in court

Published

on

Anthropic confirmed it has been designated a ‘supply chain risk’ by the US administration, and said it has no choice but to challenge in the courts.

Despite ongoing talks between Anthropic and the US Department of Defense, Anthropic confirmed last night it had received a letter from defense secretary Pete Hegseth confirming the ‘supply chain risk’ designation that had been threatened.

“Yesterday (March 4) Anthropic received a letter from the Department of [Defense] confirming that we have been designated as a supply chain risk to America’s national security,” wrote co-founder and CEO Dario Amodei last night in an official statement. “We do not believe this action is legally sound, and we see no choice but to challenge it in court.”

Amodei was quick to point out that “even supposing it was legally sound”, the limited application of the designation means the “vast majority” of its customers will be unaffected by the move. He said the restriction clearly only applied to the use of Claude by customers as a direct part of contracts with the US defense department, “not all use of Claude by customers who have such contracts”.

Advertisement

“The Department’s letter has a narrow scope, and this is because the relevant statute is narrow, too,” wrote Amodei. “It exists to protect the government rather than to punish a supplier.”

As with previous statements, Amodei strikes a conciliatory tone, saying Anthropic is committed to US national security and will offer continuing support from its engineers to ensure a smooth transition from Claude “for as long as we are permitted to do so”.

Anthropic drew the ire of the US administration after a standoff with the Pentagon, where Anthropic refused to change its safeguards related to using its AI for fully autonomous weapons, or for mass surveillance of US citizens.

With many in Silicon Valley supporting its relatively principled stand, and general users sending it to the top of the US Apple charts in recent days for free downloads – beating OpenAI’s ChatGPT for the first time – its flagship Claude.ai and Claude Code apps went down for around three hours on 2 March due to “unprecedented demand”.

Advertisement

Claude Cowork in particular was already becoming the darling of AI enthusiasts in the professional world, and Bloomberg reported on Tuesday that Anthropic was on track to generate annual revenue of almost $20bn, more than double its run rate from late 2025, signalling the rapid growth at the AI company which is today valued at around $380bn.

Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.

Source link

Advertisement
Continue Reading

Tech

Tinder settles age discrimination lawsuit for $60 million, see if you qualify for a payout

Published

on


According to the plaintiff, Tinder charged users aged 29 and older more for premium subscriptions such as Tinder Plus and Tinder Gold, while offering cheaper rates for the same services to users in their teens and 20s. The lawsuit claimed the tiered pricing model violated multiple California laws, including the…
Read Entire Article
Source link

Continue Reading

Tech

Cognizant TriZetto breach exposes health data of 3.4 million patients

Published

on

Cognizant TriZetto breach exposes health data of 3.4 million patients

TriZetto Provider Solutions, a healthcare IT company that develops software and services used by health insurers and healthcare providers, has suffered a data breach that exposed the sensitive information of over 3.4 million people.

The firm, which has been operating under the Cognizant umbrella since 2014, disclosed that it detected suspicious activity on a web portal on October 2, 2025, and launched an investigation with the help of external cybersecurity experts.

The investigation revealed that unauthorized access began nearly a year before, on November 19, 2024.

During the exposure period, the threat actors accessed records relating to insurance eligibility verification transactions, which are part of the process providers use to confirm a patient’s insurance coverage before treatment.

Advertisement

The types of data that have been exposed vary per individual, and may include one or more of the following:

  • Full names
  • Physical address
  • Date of birth
  • Social Security number
  • Health insurance member number
  • Medicare beneficiary identifier
  • Provider name
  • Health insurer name
  • Demographic, health, and insurance information

Affected providers were alerted on December 9, 2025, but customer notification started in early February 2026. According to a filing Maine’s Attorney General submitted today, the number of exposed individuals is 3,433,965.

TriZetto says that payment card, bank account, or other financial information was not exposed in this incident.

Also, the company is not aware of any cases where cybercriminals have attempted to misuse this information.

TriZetto says it has taken steps to strengthen cybersecurity on its systems and informed law enforcement authorities of the incident.

Advertisement

Notification recipients are offered free 12-month coverage of credit monitoring and identity protection services from Kroll to help mitigate risks arising from compromised data.

BleepingComputer has contacted TriZetto to learn more about the nature of the security breach and why the firm delayed notifications to consumers for several months, but we have not received a response by publication time.

No ransomware groups have taken responsibility for the attack yet, and no data leaks linked to TriZetto have appeared on underground forums.

Cognizant itself was rumored to have suffered a Maze ransomware breach in 2020. In June 2025, Clorox sued the IT firm for gross negligence after it allegedly let Scattered Spider operatives into its network following a social engineering attack in September 2023.

Advertisement

Malware is getting smarter. The Red Report 2026 reveals how new threats use math to detect sandboxes and hide in plain sight.

Download our analysis of 1.1 million malicious samples to uncover the top 10 techniques and see if your security stack is blinded.

Source link

Continue Reading

Tech

The remake of one of the best Assassin’s Creed games is actually happening

Published

on

Ubisoft has finally confirmed what Assassin’s Creed fans have suspected for years: a remake of Assassin’s Creed IV: Black Flag is officially in the works.

The company revealed the project, titled Assassin’s Creed: Black Flag Resynced, in a new blog post outlining the future of the long-running series.

We don’t know much about the game yet, but initial reports suggest that Resynced will be a full remake rather than a simple remaster, with upgraded visuals and gameplay improvements, bringing one of the best AC games into the modern age.

It’s also suggested that new story content will be added to flesh out the world around Edward Kenway’s life – at the expense of the modern day gameplay, which has apparently been removed from the remake altogether. It’ll be interesting to see how this all works, given how the original game weaved parts of both storylines into the ending.

Advertisement

We’ve known for quite some time that Ubisoft has been thinking about breathing life into the 2013 game, but this was more or less confirmed when the name surfaced on a European ratings board listing late last year.

Advertisement

We don’t yet have a release date for the game, but we know that an unannounced game was due to arrive before the end of the current financial year. Of course, Ubisoft delayed seven games earlier this year – and Black Flag is expected to be one of them.

Whether or not we see the game before the end of 2026 remains to be seen, but for now we’ll keep our “spyglass on the horizon”.

Advertisement

Source link

Continue Reading

Tech

Fully charged: Meet the local leader energizing the Pacific Northwest battery boom

Published

on

Grayson Shor, far right, at a recent Pacific Northwest Battery Collaborative meet up at a Seattle brewery on Capitol Hill. Shor launched the organization to help the sector build connections. (PNWBC Photo)

Grayson Shor, founder and executive director of the Pacific Northwest Battery Collaborative, is the driving force that’s uniting and energizing the region’s battery community.

The collaborative’s launch in October 2024 was so popular it ran out of chairs and the group now caps RSVPs because venues keep maxing out. The nonprofit has hosted 1,400 attendees at 17 different events in Washington, Oregon and online. Shor’s latest project is helping create a battery-focused mini-series he describes as a hybrid between Anthony Bourdain’s “Parts Unknown” and “Cosmos.”

Who knew that energy storage devices could generate so much enthusiasm?

“Batteries are sexy right now,” Shor said.

Batteries are making electric vehicle adoption more attractive as they’ve become increasingly powerful and quicker to recharge. They’re ubiquitous given the pervasive use of phones and consumer electronics. And as electricity demand is spiking thanks to data centers and other energy users, they’re a relatively quick, affordable way to add more power to the grid.

Advertisement

“We are installing more grid batteries in 2025 than the total amount that existed globally just two years ago,” Shor said. “This isn’t just growth, it’s a total reimagining of how our economy is powered.”

A battery ecosystem emerges

Part of the crowd at the Pacific Northwest Battery Collaborative launch party, with founder Grayson Shor in the front row in a tie. (PNWBC Photo)

Shor has spent nearly a decade working on sustainability, circular economy and battery-related issues for organizations ranging from the U.S. Department of State to Amazon to startups. When the former diplomat landed in Seattle from the other Washington more than two years ago, he was impressed by the region’s battery sector.

That included startups in electric aviation, alternative chemistries such as sodium batteries, and next-generation silicon battery materials, plus R&D resources and support at the University of Washington’s Clean Energy Institute.

But he realized the industry lacked the connections to bring together companies, academics, entrepreneurs and investors, and set out to address it. The sector welcomes his efforts.

“I’ve paid attention to folks trying to knit together community, and for the Northwest battery innovation and application ecosystem, Grayson Shor has been an unrelenting force seeking to build and amplify our unique strengths,” said Dan Schwartz, founding director of the Clean Energy Institute.

Advertisement

Tom Gurski, founder of the plug-in hybrid vehicle startup Blue Dot Motorworks, has attended the group’s functions. “In a region famous for introverted personalities their events and happy hours are invaluable for breaking down silos and getting people to connect,” Gurski said.

Beyond building community, Shor is lobbying for support for local and state policies that promote the industry and get more batteries deployed in the state. The energy storage devices have important societal benefits, he said, including better electrical grid performance and helping meet power needs during peak demand.

‘The Battery Life’

Shor speaking at a Pacific Northwest Battery Collaborative event in Seattle during 2025 PNW Climate Week. (PNBC Photo)

Shor is also the co-founder and chief product officer for Buckstop, an “urban mining” startup helping recover critical minerals from waste electronics. He also volunteers as the policy and government affairs director for the Volta Foundation, the world’s largest battery industry association.

And there’s the TV series, called “The Battery Life.” Crews recently spent three days in the Seattle area filming the first episode, visiting the battery materials company Group14 Technologies and interviewing startups at the UW’s Clean Energy Test Beds.

“We’re doing walks through factories. We’re meeting with the CEOs and the inventors, diving deep into their technology,” Shor said. But the series also has “the ‘Carl Sagan vibe,’” he added, explaining “how does this technology actually impact humanity, and why does it matter to the average person?”

Advertisement

Additional episodes will be shot in Portland and Vancouver, B.C. The plan is to air the series later this year at energy events in Oregon and Las Vegas, plus other area venues.

Future Pacific Northwest Battery Collaborative plans include a job fair and fundraising gala. Shor also envisions a convention where the entrepreneurs and innovators could set up booths to show off their technologies. The ideas keep coming.

“This is playing my little role in trying to tackle climate change, to try to advance the energy transition,” he said. “It helps with equity, it helps with economic opportunity …. It makes me happy.”
 

Source link

Advertisement
Continue Reading

Tech

The World’s Smallest Marble Clock With Pick And Place Arm

Published

on

Clocks come in many styles and sizes, with perhaps the most visually pleasing ones involving marbles. Watching these little spheres obey gravity and form clearly readable numbers on a clock has strong mesmerizing qualities. If you’re not into really big marble clocks, or cannot quite find the space for a desk-sized clock, then the tiny marble clock by [Jens] may be an option.

While he totally loved the massive marble clock that [Ivan Miranda] built, it is a massive contraption that’s hard to justify as a permanent installation. His take on the concept thus makes it as small as possible, by using a pick-and-place style arm to place the marbles instead. Although the marbles don’t do a lot of rolling this way, it’s decidedly more quiet, and replace the rumbling and click-clacking of marbles with the smooth motion of a robotic arm.

Another benefit of this clock is that it’s cheap to make, with a price tag of less than $23. A big part of this is the use of cheap SG90 micro servos, and a permanent magnet along with a mechanism that pushes the marble off said magnet. Perhaps the biggest issue with this clock is that the arm somewhat obscures the time while it’s moving around, but it’s definitely another interesting addition to the gallery of marble clocks.

Advertisement

We have previously seen such clocks built out of wood and brass as well as 3D-printed using pendulum mechanisms, which can be made pretty compact as well, albeit with a more analog vibe.

Thanks to [Hari] for the tip.

Advertisement

Source link

Continue Reading

Tech

Scenario Modeling and Array Design for Non-Terrestrial Networks (NTNs)

Published

on

Scenario Modeling and Array Design for Non-Terrestrial Networks (NTNs)

Non-terrestrial networks (NTNs) using low earth orbit (LEO) satellites present unique technical challenges, from managing large satellite constellations to ensuring reliable communication links. In this webinar, we’ll explore how to address these complexities using comprehensive modeling and simulation techniques. Discover how to model and analyze satellite orbits, onboard antennas and arrays, transmitter power amplifiers (PAs), signal propagation channels, and the RF and digital receiver segments—all within an integrated workflow. Learn the importance of including every link component to achieve accurate, reliable system performance.

Highlights include:

  • Modeling large satellite constellations
  • Analyzing and visualizing time-varying visibility and link closure
  • Using graphical apps for antenna analysis and RF component design
  • Modeling PAs and digital predistortion
  • Simulating interference effects in communication links

Click ‘Watch Now’ to explore this webinar.

Source link

Continue Reading

Trending

Copyright © 2025