Connect with us

Tech

CSaaS: Your 24/7 Digital Security Team Explained

Published

on

cCSaaS: Know All About Your 24/7 Digital Security Team 

When you are in business, the trust of your customers and credibility in the marketplace are built with years of hard work. Just imagine if that trust and reputation are wiped off overnight just because of a small mistake that you did not pay attention to the most critical need in business, i.e., security, the security of your consumer data and your company data as well. X (formerly Twitter) was attacked by a hacker and more than 220 million user email addresses were leaked in 2023. 

If such a high-level security breach can happen with giants, then for small businesses, it’s a big concern, and managing a full-fledged cybersecurity team within budget constraints is difficult. That is where Cybersecurity as a Service (CSaaS) steps in.

Cybersecurity for small businesses is easily facilitated by CSaaS technology, where companies can now simply subscribe to expert cybersecurity services, which include detection, real-time threat termination, and monitoring. Instead of hefty investments in big full-time security staff and cybersecurity tools. 

Let’s understand this cybersecurity outsourcing in a detailed way with examples, how it works, pros & cons, and more.

What is Cybersecurity as a Service (CSaaS)?

Cybersecurity is not a very new concept. It started around the 2000s with antivirus software and on-premises firewalls, and has evolved to modern-day CSaaS. But don’t confuse it with the internet and cloud-based services; it’s not exactly about cloud technology, but more about how cybersecurity is delivered and managed. 

Advertisement
What is Cybersecurity as a Service (CSaaS)?

Cybersecurity as a Service, or CSaaS, means renting or subscribing to cybersecurity protection services rather than building a whole system and managing it all by yourself. 

Think of it like any movie streaming platform, say Prime Video, but for cybersecurity, you pay that service a yearly or monthly fee for their experts monitoring, detecting, and protecting your business and its systems from cyber mishaps. And that’s how CSaaS can provide you with enterprise-level cybersecurity protection, avoiding the high cost and complexity. 

Working of CSaaS

CSaaS is like your remote security team working to protect your business. Understand how this process works step by step.

1. Assessment & Setup

The first service provider will study your business and understand the level of security it requires. By this, they can identify vulnerabilities and accordingly set up monitoring tools. 

2. Continuous Observations

Your networks, systems, devices, and applications are monitored 24/7 to detect any unusual activity or potential cyber threats.

Advertisement

3. Threat Detection

The AI-powered processes and cutting-edge tools examine your traffic and patterns to point out malware, phishing, ransomware, or suspicious activity. 

4. Response

There is a quick response from the team if there is any detection of a threat, and immediate action is taken to block it and mitigate any damage.

5. Threat Intelligence

The CSaaS service provider stays updated with data from global sources to understand possibilities of new threats and vulnerabilities, and they can be proactively prevented. 

6. Reporting & Improvement

There are regular reports displaying your security status, mentioning risks, and identifying room for improvement.

Advertisement

Types of CSaaS 

1. Managed Cybersecurity Services 

It is where a team of experts is provided to businesses, which keeps the systems in check all the time. They ensure proper working of firewalls, antivirus systems, and other protections, and take timely actions in case of unusual happenings. It’s like having a security guard for your digital world of business. 

2. Threat Detection & Response (TDR)

This is a type of CSaaS that focuses on spotting cyberattacks as quickly as they take place. It is for immediate and quick management so that major damage can be prevented. It’s like an alarm system that sends alerts and automatically closes doors as well in case of an emergency. TDR is your ultimate cyber threat detection and response tool. 

3. Threat Intelligence Services

As the name suggests, this CSaaS is about intelligence, i.e., prior information to avoid mishaps and stay ahead & well prepared in strategies. Threat intelligence services gather global data to stay ahead of hackers and be capable enough to predict new attacks and be prepared for them. 

4. Cloud Security Services

They protect cloud applications and their data. They make sure the storage is safe and secure from hackers and attackers. 

Advertisement

5. Compliance & Risk Management Services

These services are responsible for helping businesses adhere to rules and regulations with regard to data safety. By figuring out weak spots and bottlenecks in systems, they help in lowering the breaches and legal difficulties. 

6. Endpoint Security as a Service

You can call it an end-to-end security system that protects individual computers, phones, and every device connected to your network. This ensures that hackers can’t even get through your single weak point. 

7. Identity and Access Management (IAM) Services

It keeps in check who can see and use the systems and data of your company. IAM services allow only the right people to access it, and prevent unauthorized access, causing damage. 

Real-Time CSaaS Case Studies

Real-Time CSaaS Case Studies

1. EY & Medical Service Provider (Healthcare) 

By teaming up with a medical service provider, EY helped them enhance their cybersecurity framework. They provided them 24/7×360 monitoring to improve threat detection, response to threats, ensure patient data safety, and avoid any hindrance in continuous healthcare delivery. 

2. J.P. Morgan (Finance)

One of the biggest US banks has pledged to make its firm cybersecure. The CSaaS providers help them in real-time monitoring and respond timely to any global operations. They make sure the transactions are secured and the data is in place, and they minimize the chances of theft, phishing, and other fraud that may affect their asset base of more than $3 trillion. 

Advertisement

3. Tesla (Manufacturing)

Tesla was attacked with ransomware, which was contained internally. The incident took place in 2020, and Tesla then began using the CSaaS platform with extreme threat intelligence and endpoint protection. This proactive approach helped them stay protected from cyber attacks and theft, which led to innovative operations being conducted safely across the globe. 

Challenges & Benefits of CSaaS

Benefits of CSaaS Challenges of CSaaS
24/7 monitoring and protection Dependence on third-party provider
Cost-effective compared to in-house teams Possible data privacy concerns
Access to expert cybersecurity professionals Integration with existing systems can be complex
Real-time threat detection and response Limited control over certain security processes
Scalable solutions for growing businesses Requires trust in the vendor’s reliability
Regular updates and compliance support May need staff training to work with new systems
Rapid deployment and setup Potential hidden costs in contracts or add-ons
Proactive threat intelligence Challenges in aligning with company-specific policies
Reduces burden on internal IT staff Response times may vary depending on the provider
Continuous improvement through analytics Risk of over-reliance on automation instead of human oversight

Summary

In a world full of technology, security is the topmost priority, and cyber attackers and threats aren’t waiting for you or your business’s permission to intrude. But at times, it is difficult to build and manage high-proficiency security systems. Especially for small organizations, affordability is an issue. And CSaaS works as a windfall in cybersecurity for small businesses without the burden of maintaining in-house teams and expensive cybersecurity tools. 

By carefully studying the types of CSaaS, like cyber threat detection and response, threat intelligence services, or MCS, and many more, you can choose the right one as per business needs. It will assist you to stay safe, secure, and ahead of hackers and cyberattackers in a cost-effective manner. 

Related: SaaS Security Checklist: The Complete Guide
Related: What is this Levy: Google Disney Mobile Charge?

Advertisement

Source link

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tech

TECNO’s Modular Magnetic Smartphone Concept Revives a Forgotten Dream

Published

on

TECNO Modular Magnetic Interconnection Technology Smartphone Concept MWC
Smartphones have evolved into a rather predictable shape over time, with flat slabs, fixed cameras, and batteries well sealed up tight inside. TECNO decided to defy those standards at MWC 2026 by showcasing a design that brings back some pretty old-school modularity in a way that no one expected: a base phone so thin that it barely counts as a complete device until you start adding components to it.



The novelty here is that the main device is only 4.9 millimeters thick, making it narrower than a regular pencil and far thinner than those super-slim flagships that everyone has been gushing about recently. Without any accessories, the phone is rather stripped-down, with a rudimentary camera on the back, a small battery, and a few low-profile pogo pin ports. The back glass panel features a matte surface to reduce glare, and all of the edges are polished for added visual contrast and robustness. It’s all quite basic, and the markings on the rear are just subtle enough to indicate where the various modules should snap into position.

Sale


Google Pixel 10a – Berry – 128 GB with $100 Amazon Gift Card
  • Order the new Google Pixel 10a today and get an Amazon Gift Card; valid 2/18/2026 until 3/11/2026 at 11:59pm PT, while supplies last and subject to…
  • Return of Pixel 10a without gift card results in charge; offer cannot be combined, is non-transferable and not valid for cash or cash equivalent
  • If a qualifying item in your order is returned, you’ll be reimbursed for what you return, minus the value of the gift card

The attachment system is based on a rectangular array of magnets that function in tandem with the pogo pins. The magnets hold everything in place firmly, while the pogo pins give power with minimal trouble and heat. Data is transmitted wirelessly and can switch between Bluetooth, Wi-Fi, and even millimeter-wave communications depending on the module used and the situation. Pairing is simple: find the portion you want, bring it close, and it snaps into place.

Advertisement


Modules are what really make this device sparkle, without making it overly big. Right now, you have about ten possibilities in the present ecology. A power bank module adds capacity at only 4.5 millimeters thick, which is incredibly small, and it effectively doubles your useable battery life, not just for the phone itself, but also for any peripherals you connect to it. As for cameras, one module can transform the device into an action camera, allowing for fresh perspectives and innovative approaches. Another module has a telephoto lens, allowing you to use the phone display as a live viewfinder, resulting in low-latency previews and rapid pictures. Then there’s a larger zoom module with a genuine image sensor behind a true lens mount, along with some excellent physical controls on the side, essentially turning your phone into a compact camera body. Other alternatives include a gaming controller, a wireless mic that clips to your clothing, a wallet, and a speaker.

TECNO Modular Magnetic Interconnection Technology Smartphone Concept MWC
Two design possibilities demonstrate how this concept might look in real life. The ATOM version features a straightforward, sleek silver-aluminum design with some lovely red accents. The MODA edition, on the other hand, opts for a darker, more eye-catching appearance, with a strong emphasis on uniqueness. TECNO describes this as a platform rather than a single set product since it is supposed to be scalable, allowing future modules to offer all sorts of fascinating things such as AI, extra storage, off-grid communications, or accessories tailored to various lifestyles. The piece that holds it all together remains the same, so you can simply keep adding new stuff and using it all without any problems.

Source link

Advertisement
Continue Reading

Tech

Samsung Health app for Galaxy phones gets a Medications tool that also works as a discount hunter

Published

on

Samsung Health‘s Medications tracker just got a serious upgrade. It now hunts for prescription discounts across more than 70,000 pharmacies. Find a better price and you can save the coupon to Samsung Wallet with one tap. At the counter, just open Wallet and you’re done.

No more printing paper coupons or juggling separate apps. The whole thing lives inside two apps you probably already have on your Galaxy phone. Samsung says the goal is simple, make filling prescriptions less of a headache by combining medication tracking with instant savings.

How the prescription discount tool works

Open the Medications tracker inside Samsung Health. Log your prescriptions, set up your schedule, and now there’s a new option to search for discounts. The tool checks prices at local and national chains. Samsung claims access to deals at thousands of locations.

Found a lower price? One tap saves the coupon directly to Samsung Wallet. At the pharmacy, you tap your phone or show the barcode like you would with any other saved card. The discount applies right there.

The fine print says it’s limited to participating pharmacies. So not every drugstore may be included. But for the ones that are, you just saved yourself a few bucks and a bunch of hassle.

Advertisement

A broader push into health management

This isn’t happening in a vacuum. Samsung Health already lets you pull in health records from your doctors, so lab results and visit summaries live in one spot. It also offers access to board certified physicians through a partnership with HealthTap. You can discuss prescriptions without leaving the house.

Now add discounts to that mix. You track your meds, consult a doctor about them, and find a better price before you ever walk into the pharmacy. The app stops being just a step counter and starts helping you manage what you actually spend on your health.

Samsung hasn’t said whether the discounts work with insurance copays or just manufacturer deals. But for millions of users, it’s one more reason to open the app.

What’s next for Samsung Health users

The feature is live now. You’ll need the latest version of Samsung Health and Samsung Wallet installed. No word yet on international availability, US users are the likely focus given how pharmacy discounts work.

If you take regular medication, spend five minutes poking around inside the Medications tracker. You can even schedule a consultation with a doctor. Run a search on your prescriptions and see what turns up. Worst case, you stick with your current pharmacy. Best case, you save some money with a few taps and forget about it until your next refill. That’s the kind of update worth checking for.

Advertisement

Source link

Continue Reading

Tech

Charred Ryobi Air Compressor Is A Warning To Anyone Who Stores Power Tools In Their Car

Published

on





We may receive a commission on purchases made from links.

Ryobi’s tool offerings extended beyond one’s workshop or garage. There are plenty of Ryobi tools you should keep in your car in case of an emergency, though you should be mindful of where and how you store tools in your car. All it takes is one ending up in a position it shouldn’t be for things to turn catastrophic in a hurry. Case in point, Redditor u/BrianP84 found that their Ryobi handheld air compressor suddenly caught fire in their car — seemingly through no fault of Ryobi’s.

Advertisement

The Reddit user explained that the compressor caught fire, melting itself, the car’s seats, and parts of the floorboard. They also noted that the battery wasn’t the culprit, as there wasn’t any sign that it caught fire, so the Reddit community tried to fill in the blanks. The best guess was that the compressor may have moved around and had its power trigger pressed down and held in that position, likely because it wasn’t stored securely. This would have caused heat buildup over time as the tool ran, leading to overheating and eventual flames. Ryobi isn’t to blame here, as there’s no indication of a faulty tool. Instead, this was seemingly just a matter of circumstance. 

All in all, this is a cautionary tale of what can happen when tools aren’t properly stored in a vehicle. That raises the question: What is the right way to keep Ryobi power tools in a car? Well, there are a few steps one can take to ensure the safety of tools and the vehicle they’re stored in.

Advertisement

Best practice for in-vehicle Ryobi tool storage

If you absolutely need to keep Ryobi power tools in your vehicle, there are a few steps to keep yourself, your ride, and your collection safe. First, don’t leave batteries connected to your tools. Keeping a power source connected opens the door for accidental activation. Besides, a vehicle is one of the many bad places to store a Ryobi battery anyway: Ryobi recommends against long-term storage over 30 days in temperatures over 80 degrees Fahrenheit, which a vehicle interior can certainly reach. If not stored properly, lithium-ion batteries can overheat, leak, or even explode, which can spell disaster for you or your tools.

As for the tools themselves, it’s worth investing in a container to hold them while you drive. For example, Ryobi has its own line of storage containers, featuring latched lids, built-in organization, and more. These also support foam inserts, preventing your tools from rattling or moving around inside and potentially being damaged. Alternatively, a tool bag could be a good choice, as they’re designed for durability with pockets for organization and restricting tool movement. In especially hot conditions, though, moving tools to a climate-controlled area is best. Even without a battery, heat can cause damage to internal elements and thus reduce a tool’s life.

Ryobi tools generally aren’t prone to breaking or overheating suddenly, but they, and any other brand’s tools, could become dangerous in the right conditions. If you tend to leave tools in your vehicle for any amount of time, it’s in your best interest to do so as safely and responsibly as possible.

Advertisement



Source link

Advertisement
Continue Reading

Tech

Your Fridge Might Be Too Cold. Here’s How to Find Out

Published

on

Home Tips

A fridge that’s too cold or too warm will struggle to keep your food fresh. Produce is particularly susceptible to errant temps, but nearly everything you stick inside benefits from keeping your icebox set to a magic number, 

Not one to waste, I set out to find out how cool my fridge was since there’s no built-in thermometer. The ultimate goal was to ensure it’s set to that Goldilocks zone: the recommended temperature to keep most items as fresh as possible without freezing. 

Here’s how it went down and what I learned after testing nearly every temp setting on my fridge.

Advertisement

What temperature should your fridge be?

thermopro fridge thermometer and ikea timmerflotte in freezer

Before I can determine the best temperature setting for my fridge, we need to know what constitutes a safe temperature for storing food.

John Carlsen/CNET

The scientific consensus puts the ideal fridge temperature at 40 degrees Fahrenheit (4 degrees Celsius) or below — cold enough to keep bacteria in check, but not so cold that it freezes delicate foods.

Your freezer should be set to 0 degrees Fahrenheit (minus 18 degrees Celsius) or lower. It might seem like anything below 32 degrees Fahrenheit (0 degrees Celsius) would do the job, but the colder target exists for good reason: it keeps food solidly frozen even when you open the door, add fresh items, or ride out a brief power outage. As a bonus, lower temperatures also speed up freezing, which means smaller ice crystals and better preservation.

Advertisement

I ran tests using real-world conditions

thermopro-thermometer-hanging-in-crowded-freezer-door

When storing food in your refrigerator, ensure it falls within the safe temperature range for food storage.

John Carlsen/CNET

When testing the fridge temp settings, I didn’t unload all of my food, though I did move more sensitive items — fresh produce, eggs, and some glass jars — into temporary coolers for colder tests. Likewise, I couldn’t keep items outside the fridge or at warmer temperatures for longer than two hours.

This all required me to keep my tests short. Every time I opened the door, checked the temperature or changed a setting, I affected the test. These inconsistencies, while distressing to my scientific mind, yielded findings that align more closely with real-world conditions in which you might open a packed fridge multiple times an hour.

Advertisement

Fridge thermometers make these tests possible

various fridge thermometers and sensors on bamboo desk

An abundance of fridge thermometers and smart sensors helped with my test.

John Carlsen/CNET

As with any test, I needed a way to measure and track temperatures over time. For this test, I used three different kinds of temperature sensors: ThermoPro Refrigerator Thermometers, Hatusoku Digital Thermometer with External Sensor and the recently announced Ikea Timmerflotte smart temperature and humidity sensor.

ThermoPro is the most suitable option for most people because it can be hung from shelves or flipped back into a helpful stand. The built-in light also helps you see the LCD in low lighting — like my freezer, which has no interior light.

Advertisement

Hatusoku’s long temperature probe makes it a great option for a thermometer that you can stick on the outside of the fridge for at-a-glance checks. Still, the probe is extremely sensitive and almost always reacts when I open the door.

thermopro and hatusoku fridge thermometers on bamboo desk

ThermoPro and Hatusoku can track minimum and maximum temperatures, allowing you to see if the temperature leaves the safe zone or how much it fluctuates when the fridge compressor is running.

John Carlsen/CNET

Because it’s so sensitive, the min/max setting isn’t as useful. Consider waiting a few minutes after a cooling cycle before checking the temperature. You also need to contend with an additional wire when placing the probe.

Advertisement

Timmerflotte made my testing arsenal after I floated the idea to a company representative. They were just as curious to see how the sensor performed in the fridge as I was. Still, a developer with the company said the sensors could handle the internal temperature of my fridge, but that the metal might interfere with its connection to the Dirigera smart hub. (Fortunately, I had no connection issues during my test.)

hand pressing ikea timmerflotte to show current temperature

I liked that I could press the front of the Ikea sensor to show its current temperature and humidity without my phone.

John Carlsen/CNET

Because it’s a smart temperature sensor, Timmerflotte provided me with real-time temperature measurements without requiring me to open the fridge. Ikea sent enough sensors so that I could track the temperature in both the front and back of the fridge, which was incredibly helpful for finding the perfect setting. The Ikea Home Smart app didn’t have a way to track temperature over time — I couldn’t spot trends beyond my manual checks.

Advertisement

However, I should note that the minimum temperature for Timmerflotte was around 14 degrees F (minus 10 degrees C), so it was unable to track the temperature of my freezer. It also turned off after about 12 hours because freezing temperatures and Alkaline batteries don’t get along.

How I tested my fridge temps: Limitations and caveats

My refrigerator uses a simple dial thermostat to control both the fridge and freezer. The dial lists numbers 1 through 9, with 9 being the coldest setting. Starting with 1, I measured the temperature for at least 20 minutes (often longer with colder settings) to allow it to stabilize after each compressor cycle. 

ge fridge temperature control dial set to 6

My refrigerator uses a simple dial thermostat to control both the fridge and freezer. The dial lists numbers 1 through 9, with 9 being the coldest setting.

Advertisement

John Carlsen/CNET

Here’s the rub: My results are unique to my home and fridge. 

  • Although GE still makes my fridge (Model GTR15BBMRWW), it’s an old model with a likely manufacture date of April 2001. The owner’s manual even recommends setting the temperature control dial to 5 and adjusting from there.
  • I have a lot of food in my fridge due to Thanksgiving preparations. With such a large thermal load, it takes considerable time for the temperature to stabilize after adjustments are made. A high food load also blocks airflow during cooling, resulting in cold and hot spots.
  • The average temperature of my kitchen during these November tests was about 64 degrees Fahrenheit, which affects how long the fridge runs.
  • Frequently opening the door during testing certainly affected the results.
  • I usually use a slightly colder setting in the summer to keep foods in the safe zone, and GE’s advice reflects this. Even then, I only put items that are safe to freeze in the back of the fridge, just in case.

Finally, my measurements were more consistent and reliable in the fridge than in the freezer, which fortunately stayed below 14 degrees Fahrenheit (minus 10 degrees Celsius) throughout the test. (I mostly chalk this up to forgetting to photograph refrigerator thermometer readings for Levels 2, 3 and 4.) However, the freezer thermometer wasn’t consistently at 0 degrees Fahrenheit (minus 18 degrees Celsius) or below until I reached Level 4.

My test results and takeaways

hatusoku thermometer probe and ikea timmerflotte in back of refrigerator

I kept both thermometers in the back of the refrigerator to get consistent readings from both.

John Carlsen/CNET

Ultimately, Level 5 (actually slightly below this) was the only one that kept all of my food within the target range. The front, back and freezer all met the aforementioned food safety guidelines. The other settings either froze items in the back or kept front items too warm.

Fridge temperature test results

Advertisement

Setting Level Fridge Front Fridge Rear Freezer
1 44º F (Fail) 41º F (Pass) 12º F
2 44º F (Fail) 39º F (Pass) No data
3 45º F (Fail) 38º F (Pass) No data
4 42º F (Fail) 37º F (Pass) No data
5 40º F (Pass) 33º F (Pass) 0º F
6 40º F (Pass) 29º F (Fail) -3º F
7 40º F (Pass) 26º F (Fail) -7º F
8 32º F (Fail) 19º F (Fail) -12º F
9 Canceled Canceled Canceled

You can see why I canceled the test after Level 8, which put the entire fridge at or below freezing. This level also caused the compressor to run continuously for almost an hour before shutting off. 

So, I couldn’t risk spending at least as much time trying to hit Level 9, which I suspect could turn my entire fridge into a freezer — even if the fridge compartment doesn’t quite hit 0 degrees Fahrenheit. (I don’t have enough cooler space to hold a fridge’s worth of food.)

For my fridge, Level 5 is right in the middle, which is likely what the manufacturer intended when curating the various settings. From a user standpoint, I found that impressive. My biggest takeaway from the results is that setting the fridge to a colder temperature isn’t necessarily better, which is sometimes my instinct when I perceive that food is spoiling too quickly. 

Advertisement
two fridge thermometers

A simple set of fridge thermometers can help you hit your target temp.

ThermoPro

Should you test the temperature of your own fridge?

If your food is consistently spoiling or freezing without explanation, it could be because your settings aren’t calibrated properly. You may not even know which setting is intended to hit the target fridge temp of 40 degrees Fahrenheit (4 degrees Celsius) or below. If that’s the case, running a similar test on your own fridge would be wise. 

I recommend getting a set of fridge thermometers as I did. I consider them essential for simple fridges like mine, which use a dial thermostat that doesn’t display the actual temperature.

While many fridges have a digital thermostat with your target temperature, an independent fridge thermometer’s flexibility can help you learn more about your fridge. For example, you’ll be able to move the thermometer around to find cold spots or track temperatures during a power outage.

Advertisement

Source link

Continue Reading

Tech

OPM Musical Artist Gets Copyright Notice For Performing His Own Song

Published

on

from the whoops dept

It’s a tale as old as time, assuming time began a decade or two ago. A music artist who just wants to make and perform their craft gets on the internet and performs the song he or she created, only to receive some version of a copyright notice or warning, confusing the hell out of them. Sometimes this happens due to fraud. More often it’s due to some mistake with some automated bot that trolls for rights violations on behest of some massive company.

The latter is likely the case when it comes to OPM performer Jireh Lim, who recently performed one of his songs from over a decade ago on Facebook, only to be notified that his reel was being demonetized.

OPM singer Jireh Lim appeared amused and puzzled at the same time after he got a copyright notice for singing his 2013 song “Buko” in one of his social media posts. Lim shared a video of himself singing his song along with a band, through his Facebook page on Saturday, Feb. 21.

Lim shared a screenshot of the notice that reads, “Your reel’s earnings are being claimed by music rights holders. Multiple rights owners requested changes to your video because a large amount of their music was detected.”

Lim included a response in the caption of the screenshot in what I believe is Tagalog. I’m sure the translation isn’t perfect, but he essentially says, “Guys, this is me. It’s my song.”

Advertisement

So, what’s going on here? Well, the details are somewhat lacking, so I’m left to speculate a bit. Here’s what I know for sure. Lim is currently signed with Warner Music Philippines. Warner definitely has the rights to Lin’s album Love and Soul, which he made in 2015 while with Warner. Before Warner, and in 2013 when Buko was recorded, he was an independent artist. His pre-Warner catalog, however, made its way onto streaming platforms also in 2015.

And now for the speculation. I am guessing that Warner also acquired the rights to his older music, at least for streaming distribution and the like. Warner is not only extremely protectionist on copyright matters, but also employs copyright bots that automatically look for infringing content on the internet, particularly on YouTube and social media sites. So, I would guess that Lim’s reel performing “his” song got flagged by whatever automated setup Warner Music has going.

None of which changes the fact that’s it’s crazy-pants that a musical artist can’t perform his own song on the internet unmolested, nor the fact that copyright laws are obviously so stupidly insane that even these artists can’t figure out how to navigate them properly.

Filed Under: automated copyright notice, copyright, demonetization, jireh lim

Companies: warner music group

Advertisement

Source link

Continue Reading

Tech

‘Game of Thrones’ Movie In the Works

Published

on

Warner Bros. is developing a feature film set in the world of Game of Thrones with writer Beau Willimon of Andor and House of Cards. “That’s about all we know right now, and as with everything ‘Thrones’ things could change, but the film is firmly in development,” reports TheWrap. Page Six Hollywood was first to break the news and speculated that the story could revolve around Aegon I, the legendary Targaryen king who spawned a dynasty. From the report: The Targaryens have been at the center of all things “Thrones” on HBO, with “Game of Thrones” following Daenerys Targaryen’s (Emilia Clarke) quest to usurp the throne, spinoff “House of the Dragon” set in the midst of the Targaryens’ reign and recent spinoff “A Knight of the Seven Kingdoms” following the squire-ship of Aegon “Egg” Targaryen towards the end of the family’s run atop the Iron Throne. All, of course, based on George R.R. Martin’s expansive book universe.

Source link

Continue Reading

Tech

Hackers abuse OAuth error flows to spread malware

Published

on

Phishing

Hackers are abusing the legitimate OAuth redirection mechanism to bypass phishing protections in email and browsers to take users to malicious pages.

The attacks target government and public-sector organizations with phishing links that prompt users to authenticate to a malicious application, Microsoft Defender researchers say.

with e-signature requests, Social Security notices, meeting invitations, password resets, or various financial and political topics that contain OAuth redirect URLs. Sometimes, the URLs are embedded in PDF files to evade detection.

Microsoft 365 account warning lure
Microsoft 365 account warning lure
Source: Microsoft

Forcing risky redirections

OAuth applications are registered with an identity provider, such as Microsoft Entra ID, and leverage the OAuth 2.0 protocol to obtain delegated or application-level access to user data and resources.

In the campaigns observed by Microsoft, the attackers create malicious OAuth applications in a tenant they control and configure them with a redirect URI pointing to their infrastructure.

Advertisement

The researchers say that even if the URLs for Entra ID look like legitimate authorization requests, the endpoint is invoked with parameters for silent authentication without an interactive login and an invalid scope that triggers authentication errors. This forces the identity provider to redirect users to the redirect URI configured by the attacker.

In some cases, the victims are redirected to phishing pages powered by attacker-in-the-middle frameworks such as EvilProxy, which can intercept valid session cookies to bypass multi-factor authentication (MFA) protections.

Microsoft found that the ‘state’ parameter was misused to auto-fill the victim’s email address in the credentials box on the phishing page, increasing the perceived sense of legitimacy.

OAuth redirect attack overview
OAuth redirect attack overview
Source: Microsoft

In other instances, the victims are redirected to a ‘/download’ path that automatically delivers a ZIP file with malicious shortcut (.LNK) files and HTML smuggling tools.

Opening the .LNK launches PowerShell, which performs reconnaissance on the compromised host and extracts the components required for the next step, DLL side-loading.

Advertisement

A malicious DLL (crashhandler.dll) decrypts and loads the final payload (crashlog.dat) into memory, while a legitimate executable (stream_monitor.exe) loads a decoy to distract the victim.

The malware attack chain
The malware attack chain
Source: Microsoft

Microsoft suggests that organizations should tighten permissions for OAuth applications, enforce strong identity protections and Conditional Access policies, and use cross-domain detection across email, identity, and endpoints.

The company highlights that the observed attacks are identity-based threats that abuse an intended behavior in the OAuth framework that behaves as specified by the standard defining how authorization errors are managed through redirects.

The researchers warn that threat actors are now triggering OAuth errors through invalid parameters, such as scope or prompt=none, to force silent error redirects as part of real-world attacks.

Malware is getting smarter. The Red Report 2026 reveals how new threats use math to detect sandboxes and hide in plain sight.

Download our analysis of 1.1 million malicious samples to uncover the top 10 techniques and see if your security stack is blinded.

Advertisement

Source link

Continue Reading

Tech

CPU benchmarks for M4 iPad Air show comparable scores to M4 iPad Pro

Published

on

The iPad Air with M4 isn’t going to have identical performance to the iPad Pro, and Geekbench scores have confirmed how that shows up in the spec sheet.

An iPad Air laying on a surface with the Home Screen shown. It has multiple icons and dock in view.
iPad Air is updated with M4

Once Apple finally announces a product to the public, it tends to start making its way out to testers. Then, the tester performs an inevitable Geekbench benchmark, and the results are public.
The iPad 16,11 in Geekbench is undoubtedly one for the iPad Air with M4. It was first discovered by MacRumors and the results aren’t surprising.
Continue Reading on AppleInsider | Discuss on our Forums

Source link

Continue Reading

Tech

These 6 Harbor Freight Products Will Save Your Back

Published

on





There’s a reason why the most important part of a structure is often described as its “backbone.” Your spine is literally holding you up, and damage to it can affect all kinds of motion elsewhere (not to mention all it does for your central nervous system). Even minor aches and pains should be avoided, because they can lead to greater problems much further down the line — when standing, walking, and even lifting lightweight items become much harder with age.

Spending time in a garage or on a jobsite often requires a lot of lifting, bending, and twisting, which can take its toll on your back. Sure, manual labor is part of the job, or if you’re a DIYer, it may even be part of the fun, but not all physical effort is the same — and not all of it is necessary. Reducing strain on your spine and back muscles is always a good thing, no matter how fit you are. That’s why it’s just as important to include items in your toolset that specifically help your back, even if they’re not totally necessary for the job.

Advertisement

Among its other hardware and home improvement products, Harbor Freight sells several tools, accessories, and other gear that can help reduce or prevent back strain. Many of these come from one or more of Harbor Freight’s house brands and include equipment that can help bear weight, prevent injuries, or keep you from having to bend so low or at awkward angles all the time. Here are six currently available Harbor Freight products that will help save your back.

Advertisement

Pittsburgh Mechanics Roller Seat

There are several Pittsburgh tools worth buying from Harbor Freight, but the house brand makes other gear and accessories as well, including a Mechanics Roller Seat. A roller seat may not be as comfy as a high-end office chair, but the ability to roll around the garage, whether it’s to your workbench or to another tire, greatly minimizes the number of times you need to get up and down from the ground, saving your back a ton of strain.

The Pittsburgh Mechanics Roller Seat costs $31.99 and is 14 ½ inches tall. With a max load capacity of 250 pounds, the seat is 15 x 14 inches and rests on 2 ½-inch swivel casters. The casters are constructed from high-impact polyurethane to better resist oil and other chemicals commonly found in garages. The frame is built with durable steel, and the seat sports foam cushioning, so it isn’t the worst thing in the world to sit on all day as you work on a vehicle.

One very useful feature is an integrated tray to keep the tools you need most — that way, you don’t even need to roll over to your chest to grab them. It’s made from high-impact PVC, so you won’t have to worry about putting tools back as gently as possible. This feature is one of the reasons Pittsburgh’s Mechanics Roller Seat is so highly rated by Harbor Freight customers, with 93% of those surveyed recommending the product.

Advertisement

Western Safety Back Support Belt

In addition to tools and other hardware, there are also several Harbor Freight products that will help keep you safe on the jobsite, such as hard hats and safety goggles. These are obvious accessories that can prevent harm to your body, but an unsung safety product is the Western Safety Back Support Belt. By increasing abdominal pressure and reducing load on your lumbar area, as well as limiting movement so you don’t accidentally pull or twist something, it can help prevent less-conspicuous injuries. Plus, it also encourages you to maintain good posture, which can be especially hard when working.

The Western Safety Back Support Belt comes in several sizes and costs less than a sawbuck. Adjustable suspenders and a hook-and-loop design allow you to quickly make yourself comfortable in the apparatus and size it so that it can properly do its job. It’s built with tapered abdominal support panels and elastic outer panels for better comfort. 

Advertisement

It weighs less than a pound, so you won’t need to worry about it weighing you down, either. Harbor Freight also sells a Western Safety Back Support Belt with Reflector, doubling down on safety. It’s built exactly the same, so it’s providing the same benefit to your back, but with the addition of highly visible reflective strips and neon-orange suspenders. That way, your coworkers and others can easily spot you on a jobsite, even while you’re lifting something heavy.

Advertisement

Pittsburgh Telescoping Magnetic Pickup Tool

If you’re not already, you should be maximizing the efficiency of your workshop or jobsite by taking advantage of magnetic tools and accessories. Magnets may be simple, but they can offer lots of convenience when it comes to mounting, storage, cleaning, and more, which is why there are multiple magnetic tools from Harbor Freight that users love.

One such tool is the Pittsburgh Telescoping Magnetic Pickup Tool, which makes it easy to grab metal items from the ground without having to bend over and strain your back. Whether it’s a small tool or a tiny screw that’s rolled off the workbench, Pittsburgh’s deceptively straightforward pickup tool can take a lot of frustration, time, and effort out of your workday.

The Pittsburgh Telescoping Magnetic Pickup Tool has a 15-pound load capacity, so there are plenty of metal objects in the garage that it can lift on your behalf. It telescopes from 7-½ inches to over 29-½ inches, allowing you to use it in tight spaces or reach something nearly a yard away. The tool won’t add to your burden since it’s lightweight and the grip is layered with foam, so it’s more comfortable to use throughout the day. 

The device has a ¾-inch wide head and is built with steel to keep it strong and durable over time. Users love the product, and it’s one of the higher-rated tools in Harbor Freight’s catalog. In customer reviews, multiple users specifically say it’s great for your back, whether you’ve got a bad back or are trying to prevent one while you can.

Advertisement

Bauer Steel Adjustable Sawhorse

Many carpenters, both professional and casual, know that there are many Harbor Freight woodworking tools that are worth buying. One of these products — Bauer Steel Adjustable Sawhorse — can save your back in addition to helping you accomplish your woodworking tasks. That’s because its nine different height settings allow you to erect the sawhorse at a level that’s optimal for you and your back, enabling you to cut wood without having to hunch in an awkward — and potentially damaging — position.

Advertisement

The Bauer Steel Adjustable Sawhorse is built to be heavy-duty and can hold 1,300 pounds, giving it a 2,600-pound max capacity when paired with a second one. It’s made entirely of durable steel and is powder-coated and zinc-plated to better withstand harsher jobsite conditions. It includes material support pegs and pivoting feet to provide users with better stability during cuts. It can easily be adjusted, and the tallest of its nine height options is 32 inches.

Besides being better for your back, it’s also easy to move around and store. It folds up into a more compact, easier-to-carry shape and includes an integrated carrying handle. With all this in mind, it’s not hard to see why 96% of surveyed Harbor Freight customers recommend the product and why it’s highly rated. While some owners say it can be a bit of a hassle to initially set up, more than one user reports that it makes working without back pain possible.

Advertisement

Cosco 3-in-1 Convertible Hand Truck and Franklin Hardwood Dolly

Lifting a car all on your own is preposterous, which is why Harbor Freight’s metallic red Daytona jack and similar tools are readily available. But there are plenty of reasons why you shouldn’t lift and carry smaller loads, either. You might be physically strong enough to move around heavy tool boxes, lumber, or equipment, but your back would really appreciate it if you lightened the load when you can. 

Over time, you’ll appreciate it yourself, because straining your back as you carry items, as well as bending up and down to lift and drop them, takes its toll on your spine and surrounding muscles. Harbor Freight sells several kinds of hand trucks, wagons, and dollies that will handle most of the weight for you. The Cosco 3-in-1 Convertible Hand Truck can be used as an upright 2-wheel truck, as well as a 4-wheel cart or hand truck, and can be switched between these modes one-handed and without tools. When horizontal, it can hold up to 1,000 pounds; when vertical, it can hold up to 800 pounds.

Franklin also makes a heavy-duty hand truck, but an even simpler option is its 18 x 12-inch Hardwood Dolly, which has a 1,000-lb capacity. Its carpeted surface prevents scratches on whatever you’re carrying, like furniture. Using products like Cosco’s hand truck and Franklin’s dolly will save your back a lot of wear and tear. You might be the type of person whose pride is hurt when others see you not lifting the big stuff all on your own, but wounded pride is a lot, lot better than a wounded back.

Advertisement



Source link

Advertisement
Continue Reading

Tech

Trapeze Rec Club to close, sudden notice leaves members seeking answers

Published

on

The wellness club was founded by GJ Wee, son of UOB CEO Wee Ee Cheong

Homegrown wellness club Trapeze Rec. Club (TRC), opened by GJ Wee, son of billionaire UOB CEO Wee Ee Cheong, is set to close by Mar 22.

In a post on its Instagram page yesterday (Mar 3), the business said “rising costs” made continuing at its current location unsustainable. The decision was reportedly made last week.

TRC said its team is individually reaching out to members, processing refunds, and supporting its coaches, though the post did not clarify what would happen to the coaching staff and encouraged the community to contact them directly.

The club added that it is also “closing the chapter right” with suppliers, vendors, and partners.

Advertisement

Classes and private training will continue until the closure date.

trapeze rec club appointment closuretrapeze rec club appointment closure
Screenshot of TRC’s website as of Mar 4 shows that the wellness club is still open for bookings./ Screengrab by Vulcan Post

As of Mar 4, TRC’s website is still open for bookings until Mar 18, while there are classes still scheduled until Mar 22.

Launched in 2021, TRC is a four-storey fitness club spanning 8,000 square feet that’s located in a pre-war shophouse at Tanjong Pagar. It offers group classes covering fitness, wellness, and more, alongside personal training.

The club operates under the wellness-focused lifestyle company Trapeze Group, also founded by GJ Wee. Other brands under the group include Hideaway, a massage and bathhouse-style recovery concept in New Bahru, which appears to be operating as usual.

A “surprising closure”

A day prior to TRC’s official Instagram announcement on Mar 2, a netizen going by @swiftologist was already seeking answers about the club’s “imminent (and surprising) closure” from both TRC and its founder.

Advertisement

He called the closure sudden and “disruptive,” while lauding TRC’s trainers “who did everything they could to keep Trapeze going, despite clear indifference to the well-being of members and staff from upper management.”

trapeze rec. club instagram closuretrapeze rec. club instagram closure
Screenshots of comments made by @theswiftologist on TRC’s Instagram page on Mar 2 and Mar 3./ Screengrab by Vulcan Post

In response to the official announcement on Mar 3, the netizen added that members were “given less than a month’s notice,” after seeking clarification on Mar 2 and only “finally” getting an official address on Mar 3.

He further questioned if TRC’s closure was “truly unavoidable due to rising costs,” and that “the community deserves a direct explanation from the founder itself—not just a message via the brand account.”

@swiftologist also went on to question the founder’s priorities “when other projects appear to continue while this space (the one with a real, invested community) is deemed ‘unsustainable’.”

Other members have echoed similar concerns, describing the closure as given on “very short notice.” One netizen noted that members were informed of a possible relocation “just last month,” only to now be told that operations are shutting down entirely, which they said “feels abrupt, poorly handled and communicated.”

Advertisement

That said, some members have also expressed support amid the discussion.

When Vulcan Post approached @swiftologist and TRC for additional comments, both said that they had nothing to add.

  • Read more stories we’ve written on Singaporean businesses here.

Featured Image Credit: Trapeze Rec. Club

Advertisement

Source link

Continue Reading

Trending

Copyright © 2025