Connect with us
DAPA Banner

Tech

There’s a Secret Ingredient to Making Luxury Ice at Home

Published

on

If you don’t want to bother with cutting your own cubes, then Klaris has you covered. Klaris has labored to make a kitchen countertop version of the classic Clinebell machine, and we loved it. Trouble is, it costs a hard-to-swallow $550. Now, however, the company has created a new, cheaper version called the Klaris Mini, which retails at a much more palatable $300. The small 8 x 8 x 8-inch box produces two ultra-clear, 2-inch cubes at a time, which can then be stored away in your freezer if you’re stocking up before a party.

Nice Ice

Now, these methods effectively banish those pesky bubbles, but what about replicating that glacial purity in your homegrown luxury ice? It turns out there are three solutions here, and all are easily attainable at home—the last one remarkably so.

“Glacial ice is quite pure because it comes from rainwater,” Salzmann says, adding that the way to get cleaner water at home is to remove the ionic impurities (dissolved inorganic salts, minerals, and metals that carry a positive or negative charge, such as calcium, sodium, chloride, and sulfates). Salzmann says a water filter will remove much of the tap water impurities and pollutants, or you can use what Salzmann recommends: deionized water—”the kind you would use for doing the ironing.”

Image may contain Bottle Water Bottle Beverage Mineral Water and Shaker

Clear choice: is this the best water for luxury home ice?

Advertisement

Photograph: Crystal Geyser

But we’re not done yet. Now you have to get rid of the gases in your water that will increase the chances of cloudy ice. To do this, boil your water first to force out any gas, then freeze it before it can reabsorb any more.

There’s a nasty problem with drinking too much very pure water. “Within your cells in your body, there’s a lot of water—but there’s also lots of other stuff, dissolved materials that exert osmotic pressure on your cell membranes,” Salzmann says. “If the medium surrounding your cells does not have the same content of dissolved materials, there’s a different osmotic pressure. So, the bottom line is, if you drink too much deionized or super-pure water, it would be quite bad for you.” Now, we should point out here that you’d have to drink an awful lot of this pure water to run into trouble—a few ice cubes won’t come anywhere near close to causing you any problems.

Still, we can swerve even this last potential pitfall by turning to the sage advice of Kevin Clinebell, grandson of Virgil, who now runs the family company with his brother Scott.

“I’ve got a customer in Las Vegas that studied [using water filters], because Las Vegas has very poor water,” Clinebell says. “Their dissolved solids are something to the tune of 450 parts per million, whereas here [in Colorado], it’s 45 to 48 parts per million,” adding that the system was also very inefficient. “So he started playing with different bottled waters—Fiji, Aquafina, all different types. The one that he found that was as close to perfect as you could get is Crystal Geyser bottled water. That one gave him the best results of any water that he’s ever tried, and he’s running reverse osmosis and everything else.”

Advertisement

Source link

Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

Basic-Fit hit by hack affecting members across multiple countries, including 200,000 in the Netherlands

Published

on

The breach exposed names, addresses, email addresses, phone numbers, dates of birth, and bank account details. No passwords or identity documents were accessed. The Dutch Data Protection Authority has been notified. Basic-Fit operates over 1,300 clubs across seven European countries.


Basic-Fit, Europe’s largest budget fitness chain by club count, has disclosed a data breach affecting members across multiple countries, with approximately 200,000 members in the Netherlands alone whose data was exposed.

The company confirmed it had notified the Dutch Data Protection Authority (Autoriteit Persoonsgegevens) after detecting unauthorised access to the system it uses to register member visits to its fitness clubs.

The data exposed includes membership information, names, home addresses, email addresses, phone numbers, dates of birth, and bank account details. Basic-Fit confirmed that no identity documents, such as passports or driving licences, are stored by the company, and that no passwords were accessed in the breach.

Advertisement

The attack targeted the chain’s club check-in and visit-registration system, which logs member access through turnstiles at each location. Basic-Fit operates in seven European countries: the Netherlands, Belgium, Luxembourg, France, Spain, Germany, and Austria.

Advertisement

The inclusion of bank account details in the leaked data is likely to be the most significant concern for affected members. In combination with names and dates of birth, IBAN numbers and bank details create the conditions for SEPA direct debit fraud and financial impersonation.

Basic-Fit’s privacy statement confirms that the company collects bank account numbers from all members as part of the subscription process, used to process recurring membership payments.

Affected members have been warned to monitor their accounts closely and to be alert to phishing attempts that may use the exposed personal details to appear credible.

The breach arrives during a difficult period for data security in the Netherlands. In February 2026, telecom operator Odido, formerly T-Mobile Netherlands, suffered what cybersecurity experts described as one of the largest data breaches in Dutch history, with the personal data of approximately 6.2 million customer accounts exposed through an attack on its customer relationship management system.

Advertisement

That incident included IBAN numbers, passport details, and dates of birth. The Basic-Fit breach is substantially smaller in scale but follows the same pattern of attacks targeting systems that hold aggregated customer identity and financial data in bulk.

Source link

Advertisement
Continue Reading

Tech

3D-Printed Parts Nearly Sink RC Submarine

Published

on

Of all the remote-control vehicles one can build, a submarine is possibly the hardest: if something goes wrong with almost any other vehicle, it’s easy to recover and repair, but a submarine is a very different affair. This nearly lost [James] of [ProjectAir] his latest project, a 2.7-meter long RC submarine, but it survived to make a few test sails.

Before building the full version, [James] made a test prototype. These submarines use large syringes as ballast tanks, pulling water in and out of the submarine body. The plungers are driven by a lead screw, and have a linear potentiometer for feedback. This can be wired in the same way as a servo motor, making it compatible with the RC controller. The controller receives its signal from an antenna in a buoy tethered to the submarine. Since initial tests worked well, [James] moved on to the full-scale model.

This was made out of radially-arranged acrylic tubes, with all but the top tube left open to the water. At the back of the submarine there were servo-actuated fins and a propeller, which would allow it to steer, ascend, and descend underwater. To waterproof the servo motors, [James] sealed them as much as possible, then filled them with oil. The other water-exposed electronics were either potted in epoxy or coated with a waterproofing compound. During testing, the submarine descended without issue, but was reluctant to resurface. Most of the external components had been 3D printed, and water infiltrated the infill below a certain depth. [James], however, managed to recover it before it was permanently lost, and managed to make a few other dives at a very limited depth.

On the other end of the spectrum from an RC submarine, we’ve also seen a rubber band-powered submarine. We’ve also seen a smaller, but more dive-ready RC submarine.

Advertisement

Thanks to [H Hack] for the tip!

Source link

Advertisement
Continue Reading

Tech

Reverse-Engineering An Amazon Blink Gen 3 Camera

Published

on

After some water intrusion apparently killed one of [electronupdate]’s Amazon Blink Gen 3 cameras he took this opportunity to do a full teardown and analysis of all the major components. Spread across its three PCBs there are no fewer than two wireless ICs and a custom ASIC for all the major processing. There’s also a blog post with easy-to-ogle pictures.

The most basic PCB is effectively just a PCB antenna for the Silicon Labs EZR32 IC on the main PCB, using which the ~915 MHz connection with the central hub is maintained. The other smaller PCB is a bit surprising in that it contains a Cypress CYW43438 W-Fi b/g/n and BT 5.1 chip. This would seem to be used for the setup process, but considering that it also uses a central hub it is a bit of a mystery as to what it is used for exactly.

Finally, the main PCB contains all the major parts, with the custom Amazon Immedia ASIC that’s an integral part of this very low-power camera. Given that two AA cells being enough to run the camera for about two years, using off-the-shelf parts probably wasn’t good enough without some serious customization.

Advertisement

As for why this outdoors-rated camera failed after a few years in the outdoors, the reason appears to be water intrusion via the speaker opening. As for why a camera needs a speaker and not just the microphone is left as an exercise to the reader, but maybe it could be useful for yelling at the local kids to get off your darn lawn?

Advertisement

Source link

Continue Reading

Tech

New XP95 hacker group targets Dublin recruitment platform Healthdaq

Published

on

Over the weekend, Northern Irish health trusts were on high alert after the XP95 hacker group claimed to have accessed half a million files.

A recruitment platform used by Northern Ireland’s health trusts has reportedly suffered a cyber attack from the relatively new hacker group XP95, who are claiming they accessed hundreds of thousands of files.

With headquarters in Dublin and offices in Belfast, Toronto and Melbourne, Healthdaq has not yet replied to our request for comment, but BBC NI reported over the weekend that it has seen an email from Healthdaq’s data protection officer, saying it had become aware of unauthorised access to data held on its platform on 30 March, and that the issue had been contained.

“The incident has been identified as a confidentiality breach involving unauthorised access and extraction of data,” BBC NI quoted the email, which said that names, contact details, CVs and forms of government ID could be among the data that was stolen, in some cases even health data.

Advertisement

The cited email went on to warn that the nature of the data stolen meant that there was a risk of misuse, from identity theft to fraud. According to the BBC, the health trusts have warned all staff to be aware of a potential cyber incident and to be extra vigilant.

Healthdaq told The Newsletter in Belfast that the incident had been reported to the “relevant regulatory and law enforcement authorities” including the Garda National Cyber Crime Bureau .

According to threat intelligence firm Red Piranha, the XP95 ransom actor was first observed on March 4, and its first know attack was on Eholo Health, a Spanish mental-health SaaS platform serving over 10,000 psychologists across Spain and Andorra.

“The actor’s BreachForums profile was freshly created at the time of first appearance, with no prior references in threat intelligence reporting linking XP95 to any known organised group or prior campaigns,” said Red Piranha in a threat intelligence report from early March.

Advertisement

“Unlike conventional ransomware operators, XP95 does not deploy encryption malware,” it said. “The group operates a pure exfiltration-and-extortion model: sensitive data is stolen from the victim environment, a proof-of-compromise sample is published on a Tor-hosted Data Leak Site (DLS) and cross-posted to BreachForums, and a ransom demand is issued with a hard payment deadline.”

Should the ransom not be paid, XP95 then threaten to publicly release the stolen dataset for sale. Reporting suggests that healthdaq has indeed received a ransom request.

Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.

Advertisement

Source link

Continue Reading

Tech

Anthropic is bringing Claude’s AI power to Microsoft Word

Published

on


  • Claude is now available directly within Word, Excel and PowerPoint
  • It is designed for more specific use cases than Copilot, at the moment
  • You can connect Claude with Word whether you’re using Windows, Mac or the web

Anthropic has launched a new add-in for Claude to embed its AI assistant directly into Microsoft Word, giving users an alternative to Copilot for asking questions about documents, editing and generating content.

Currently available in beta for Team and Enterprise plans, there’s no word on a broader consumer rollout across the wider word processor scene as yet.

Source link

Advertisement
Continue Reading

Tech

20x quota, long hours, or get out

Published

on

In short: Carles Reina, ElevenLabs’ head of go-to-market and one of the company’s earliest employees, has issued a candid warning to candidates considering sales roles at the $11 billion voice AI company: expect long hours, constant travel, and an annual quota worth 20 times your base salary, with termination as the direct consequence of missing it. The comments, made on the 20VC podcast hosted by Harry Stebbings, have drawn attention for their directness at a moment when ElevenLabs is one of the fastest-growing AI companies in Europe. The company raised $500 million in a Series D led by Sequoia Capital in February 2026, having scaled to $330 million in annual recurring revenue in three years without relaxing the performance bar Reina describes.

Twenty times your salary, or you’re out

The structure Reina describes is simple. “If I pay you $100,000 a year, your quota is $2 million,” he said on the 20VC podcast. “That’s it. If you don’t achieve your quota, then you’re going to be out, right?” The ratio, 20 times base salary, is considerably higher than the industry standard for enterprise software sales roles, where quotas of five to eight times base salary are more common. Reina does not frame this as a threat to candidates: he presents it as the operating logic of a company that has grown to $330 million in annual recurring revenue in three years, and argues that the quota filters in the right kind of person rather than simply filtering out people who cannot perform.

The caveat Reina offers is that the bar is achievable. He said more than 80% of ElevenLabs’ sales representatives hit their quota in recent periods, a figure that, if accurate, suggests the 20x structure functions less as an attrition mechanism than as a self-selection device during hiring. The intent, he argues, is to warn candidates before they join rather than to discover the mismatch after. The long hours and travel requirements he flagged on his second 20VC appearance are the complement to the quota: ElevenLabs’ sales culture is remote-first but built around in-person customer relationships, with account executives expected to travel frequently and operate with a high degree of autonomy. Reina has said that “outbound is dead unless you do it with humans,” a position that commits the sales team to a relationship-intensive model that cannot be compressed into a nine-to-five schedule.

The compensation structure includes one notable pro-sales element: both the account executive and the customer success manager are paid if an upsell is completed within the first 12 months. This model, which treats customer success as a revenue-generating function rather than a post-sale support role, is one of the more unconventional positions Reina has taken publicly. In his second 20VC appearance, which led to the Business Insider coverage, he framed the traditional separation of customer success from revenue as “total BS,” arguing that the function’s value is indistinguishable from the value of closing new business if it is structured correctly.

Advertisement

Built from inside the machine

Reina’s authority on these questions comes from an unusually close vantage point. He describes himself as ElevenLabs’ first investor and fourth employee, which means he was involved in constructing the sales culture from scratch rather than inheriting one. He has scaled the revenue organisation from its earliest days to the $330 million ARR milestone, a trajectory that spans three years and multiple product pivots as ElevenLabs moved from a text-to-speech research project to an enterprise voice platform. The culture he describes is, in that sense, not a policy imposed on an existing team but the output of building a sales function inside a product-led company that had strong pull before it had a dedicated sales motion.

Advertisement

ElevenLabs was founded in April 2022 by Mati Staniszewski, who serves as CEO, and Piotr Dabkowski, who serves as CTO. The two met as teenagers at Copernicus High School in Warsaw, Poland; Staniszewski later studied mathematics at Imperial College London and worked as a deployment strategist at Palantir Technologies, while Dabkowski completed degrees at Oxford and Cambridge and worked as a machine learning engineer at Google. Their starting frustration was the quality of dubbed American films they watched growing up in Poland, an observation about the gap between what voice synthesis could do and what it needed to do to be useful that turned out to have significant commercial application. The company’s total funding across five rounds since 2022 stands at $781 million.

The Series D, closed on 4 February 2026 and led by Sequoia Capital, added $500 million to the company at an $11 billion valuation, more than three times its previous round valuation from January 2025. Andreessen Horowitz quadrupled its stake in the round, ICONIQ Growth tripled its position, and new investors Lightspeed Venture Partners, Evantic Capital, and BOND also participated. Andrew Reed, Partner at Sequoia, joined the company’s board. ElevenLabs closed 2025 at $330 million in annual recurring revenue, with the company targeting a doubling of that figure by the end of 2026, driven primarily by enterprise expansion.

Voice AI grows up

The product Reina’s team is selling has changed substantially since the company launched. ElevenLabs began as a text-to-speech research platform and became publicly associated with the voice cloning capabilities that made it one of the faster-growing AI consumer products of 2023. Its current enterprise offering centres on ElevenAgents, a platform for deploying voice and conversational AI agents that the company positions against customer support, sales automation, internal enablement, and workflow use cases. The platform supports more than 10,000 voices across 70 languages, with enterprise customers including Deutsche Telekom, Square, the Ukrainian Government, and Revolut among those that have deployed it for production workloads.

The infrastructure supporting those deployments has been reinforced by a series of major partnerships. In February 2026, ElevenLabs and Google Cloud expanded their strategic partnership to run on NVIDIA Blackwell GPUs, giving ElevenLabs access to the compute architecture it needs to serve high-volume enterprise inference at the latency standards voice applications require. In March 2026, ElevenLabs and IBM announced an integration between ElevenLabs’ text-to-speech and speech-to-text capabilities and IBM watsonx Orchestrate, IBM’s enterprise agentic AI platform, targeting banks, insurance companies, healthcare providers, and utilities that need voice agents capable of operating across languages and regulatory environments simultaneously.

Advertisement

The revenue split at the end of 2025 was approximately 50% enterprise and 50% consumer. The company expects that ratio to shift to 60% enterprise and 40% consumer by the end of 2026, and to continue moving in the same direction in 2027. This trajectory explains the specific shape of the sales culture Reina describes: enterprise software with a rapidly expanding product surface, in a market where competitors are also investing heavily, requires a sales organisation that can build and sustain relationships at speed and volume. The quota that results is high by conventional standards. By ElevenLabs’ own account, it is calibrated to what the market and the product make achievable.

What the model reveals

The directness of Reina’s candidate warnings sits within a broader pattern of AI-era companies reconfiguring what they expect from people, and where they invest the headcount they do hire. Meta cut hundreds of jobs across Reality Labs, recruiting, and sales in March 2026, redirecting the capital toward a $135 billion AI investment programme that Zuckerberg described as the defining bet of the company’s current phase. The pattern, which has played out at Klarna, Microsoft, and others, is consistent: AI spending rises, headcount in traditional functions falls, and the roles that survive carry higher expectations and, in some cases, higher compensation.

TNW reported in August 2025 that the next generation of AI unicorns might not hire anyone at all, analysing a structural shift in which the average seed-stage startup was being built with fewer than four people compared to more than six in 2022. ElevenLabs is not a zero-workforce company, and Reina’s comments are not a defence of that model: the whole point of his sales culture is that outbound is a human discipline that requires more relationship investment, not less. But the underlying dynamic is the same. Fewer roles, each carrying more responsibility, selected more precisely, paid more directly for measurable outcomes.

The voice AI category Reina is selling has also attracted its own wave of smaller investment activity. In March 2026, Ringtime raised €1.8 million to deploy AI voice agents in blue-collar recruitment, automating candidate outreach, screening, and matching across 22 languages for logistics, retail, food processing, and construction employers. The use case is different from ElevenLabs’ enterprise positioning, but the underlying technology and the commercial logic of replacing manual communication workflows with AI agents are the same. The market Reina is working is expanding from both ends: from the enterprise side, through large platform integrations, and from the startup side, through an increasing number of vertical applications built on voice AI infrastructure.

Advertisement

Glassdoor reviews from ElevenLabs employees describe “abnormally high” quotas and long hours, consistent with Reina’s public characterisation. Some reviewers note that leadership views membership of the ElevenLabs team as a reward in itself, a perspective that has generated frustration among employees who feel their performance above quota is not separately recognised. Reina’s approach to candidate transparency is, in that sense, a response to a known tension: the culture is demanding, it produces results, and it is better for both parties if candidates know that before they start rather than after.

Whether that level of directness becomes more common in AI-era hiring is partly a function of whether the results it produces continue to justify the model. ElevenLabs reached its current position as part of a broader acceleration in European AI ambition. TNW observed that five European startups joined the unicorn club in the opening weeks of 2026, a moment it described as evidence of a maturing European tech identity. ElevenLabs, with Polish founders and a global product, fits that pattern. At $330 million in ARR and $11 billion in valuation, the performance standards it demands of its sales team are the internal expression of the same ambition visible in the funding numbers.

Source link

Advertisement
Continue Reading

Tech

5 Things That Will Void Your Milwaukee Tool Warranty Immediately

Published

on





In many corners of the consumer power tool market, Milwaukee Tools is a name respected for manufacturing tools that boast a desirable mix of power, performance and durability. Milwaukee has also served as one of the more forward-thinking names in the powered tool game, with the company developing innovative gear like the reciprocating saw, and spearheading the market’s move towards game-changing Lithium-Ion battery technology.

These days, Milwaukee Tools makes powered and non-powered devices that can handle pretty much any job you might encounter on a work site or undertaking DIY projects on the home front. Apart from its reputation for producing innovative, high quality tools, Milwaukee backs those products by one of the better warranty programs in the consumer tool arena.

Advertisement

There are, of course, conditions to Milwaukee’s warranty coverage, with customers required to officially register the tool within 30-days of purchase to qualify. Assuming you properly check all the warranty boxes, Milwaukee’s coverage should protect you from any number of “defects of the product during the warranty period, due to faults in workmanship or material at the purchase date.” The coverage is, however, restricted to a “repair or replace” policy. Moreover, there are several rules that owners of Milwaukee Tools need to abide by to ensure their device is still properly covered if they need to cash in on the warranty. Here’s a look at a few things that might lead Milwaukee Tools brass to void that coverage with a quickness.

Advertisement

Using an incorrect power source

Given Milwaukee Tools’ history with Lithium-Ion technology, it’s not hard to understand why the company has pivoted as hard as any of the major power tool manufacturers into battery-powered devices. These days, there are dozens of devices that fall under the brand’s M18 family of cordless power tools. Of course, if you’ve already purchased a device or two in the M18 lineup, you likely know that you may need more than one rechargeable Lithium-Ion battery to power them, and that those battery packs are hardly cheap.

That last fact may tempt you to search for off-brand power packs that are compatible with Milwaukee’s M18 offerings, as they tend to be cheaper to buy than official gear. You may, however, want to think long and hard about taking the cheap way out when it comes to powering your Milwaukee tools gear, because according to the company’s warranty terms, connecting your device to an improper supply will instantly void your coverage.

In particular, that term specifically includes any power supply that provides the wrong level of amps, voltage, or frequency to the device it’s connected to. Yes, that also includes any corded Milwaukee tools you might be plugging into outlets that are providing too much or too little power. As such, you’ll want to be vigilant about not only where you plug your tool in, but that any battery packs you are eyeing fit within the power specs laid out by Milwaukee Tools in its instruction manual.

Advertisement

Improper maintenance or modifying your tool in any way

One might reasonably assume that every Milwaukee-branded tool has been designed and manufactured to perform precisely as it should when deployed for the job it’s intended for. Operating under that assumption, it would seem pretty unnecessary to even consider trying to bolster the device’s performance with upgrades or modifications. Even still, there are no doubt Milwaukee Tools owners who want to push their current device beyond its intended limits with alterations and enhancements of their own doing.

Apart from the potential dangers that come with making those sorts of mods on your own, you should know that such alterations will also negate any warranty coverage that may still exist for the device itself. Per Milwaukee Tools warranty conditions breakdown, that caveat will negate coverage for “Any product that has been altered or modified,” seemingly without exception.

Advertisement

Now that you know you should not try to alter or modify your Milwaukee device on your own, there is another factor to consider, which is that you will also need to properly care for and maintain your tool during its warranty period. While Milwaukee does not specifically break down the parameters of such care, it’s reasonable to think that includes things like cleaning up your device after every use. With battery packs, it may also include proper storage habits, and with tools like chain saws, it means ensuring they are properly oiled during use, as failure to do so may indeed void your warranty.

Advertisement

Repairing a tool yourself

Despite having a reputation for being durable on the job, there’s no guarantee that your Milwaukee device will not malfunction or break during usage. That possibility is, after all, one of the primary reasons that warranty coverage exists in the first place. 

The good news is that, should your Milwaukee Tools device fail or break during usage, it can likely be repaired quickly when you use the company’s eService Repair support option. That option will almost certainly, of course, require that you ship the device to a Milwaukee repair center so that the fix can be made by a certified professional. That means you’ll be without your tool for as long as it takes to make the repairs and ship it back to you, which may be too long for some folks; especially those who have a knack for fixing broken things on their own.

As tempting as that may be for folks who enjoy tinkering with broken things and fixing them on their own, Milwaukee Tools has strict rules about the way their warrantied devices can be repaired. And yes, if you choose to undertake that repair on your own, or use an unapproved third-party, the warranty coverage will be voided. It is not clear, however, how far ranging that rule is, particularly when it comes to relatively simple fixes like re-attaching the chain to a saw’s guide bar. So, you may want to contact Milwaukee Tools before undertaking such endeavors.

Advertisement

Using a tool for work it is not designed for

It should go without saying that every device bearing Milwaukee Tools’ iconic lightning bolt logo has been painstakingly designed and tested to perform a specific task before it made its way to the consumer retail market. Given the fact, it should be just as obvious that each of those devices should only be used to perform the work it was specifically produced to perform.

Unfortunately, that concept is not so obvious to some pro workers and DIYers throughout the Milwaukee Tool using world. We might even go so far as to posit that it is not entirely uncommon for those who utilize Milwaukee devices to apply the “multi-tool” label to some devices that are not at all intended for the multi-use approach. As tempting as it may be to save a few bucks by tasking a seemingly capable tool with a job it wasn’t designed to do rather than buy a new one, doing so will indeed void said tool’s warranty coverage.

Advertisement

Milwaukee covers that restriction a couple of ways in the terms and conditions of its warranty coverage for tools, stating initially that coverage does not apply to “Any damage caused by non-observance of the instruction manual.” A later bullet point on Milwaukee Tools’ terms and conditions page goes on to add that a warranty will also not cover “Inappropriate use, overloading of the tool.” So, go ahead and count yourself warned. 

Advertisement

Using unapproved accessories

On the “misuse” list, Milwaukee’s warranty coverage also does not cover things like damage caused by water, hazardous chemicals, or foreign objects. However, it also doesn’t cover average wear and tear the device might endure during usage, though most warranties are not meant to protect against degradation for the duration of the tool’s lifespan. For the record, that last bit also includes any accessories that were included with the tool at the point of purchase, with Milwaukee specifically noting, “screwdriver bits, drill bits, abrasive discs, sand paper, blades and lateral guide, blades, saw chains and cutting lines.”

It turns out that accessories are a bit of a hot button subject when it comes to the warranty coverage provided for many Milwaukee Tools, as the brand will also void said coverage if it is discovered that you have been outfitting your device with accessories or parts that have not been approved for use with it. That list no doubt includes a wide range of Milwaukee compatible accessories that were manufactured by brands other than Milwaukee.

Just as with battery packs, off-brand gear tends to be priced considerably cheaper than some official Milwaukee accessories. This restriction would also seem to cover incorrect usage of even Milwaukee-branded accessories. While we’d never try to dissuade you from saving a few bucks in the often pricey power tool market, we are still compelled to encourage you to weigh the potential savings of buying off-brand gear or misusing official gear versus the risk of losing your warranty coverage.

Advertisement



Source link

Advertisement
Continue Reading

Tech

vivo V70 FE Goes on Sale With 200MP Camera and 90W Fast Charging

Published

on

After launching the pretty-decent vivo V70, which we reviewed and loved, the Chinese smartphone maker is back at it again. The company has just announced the sale of its latest V-series smartphone, the vivo V70 FE, in India. The new device focuses on high-resolution imaging, premium design, and long battery life, targeting users who want a feature-packed mid-range phone. Here’s everything you need to know about it.

200MP For the Win

The headline feature of the vivo V70 FE is its 200MP OIS main camera, designed to capture highly detailed images with improved stability. The phone also supports AI-powered features like 30x SuperZoom, multifocal portraits, and 4K video recording with stabilization. On the front, users get a 50MP selfie camera with eye autofocus, making it suitable for group shots and video calls.

vivo is also bundling a full AI photography suite, including tools like object removal, scene enhancement, and automatic color correction. These features aim to simplify editing and help users achieve polished images with minimal effort.

New Design & Processor

v70 fe

One of the more interesting additions is vivo’s Darkness Glow Technology, available on the Northern Lights Purple variant. As the name suggests, the back panel can glow in the dark after exposure to UV light, adding a bit of flair to the design.

On the front, there’s a 120Hz OLED display, while performance is handled by the MediaTek Dimensity 7360 Turbo chipset, combined with LPDDR5 RAM and UFS 3.1 storage. The smartphone runs on OriginOS 6, offering AI tools, productivity enhancements, and customization options. vivo is also promising 4 years of OS updates and 6 years of security updates, which is notable for this segment.

Advertisement

The vivo V70 FE is available in three variants:

  • 8GB + 128GB: ₹37,999
  • 8GB + 256GB: ₹40,999
  • 12GB + 256GB: ₹44,999

Source link

Continue Reading

Tech

Google has reportedly started to add Polymarket data to News results

Published

on

Google News has begun showing Polymarket bets and odds alongside actual stories, . These look to appear as large blocks that include links to numerous ways for people to lose their money.

Bets tend to appear in the “For you” section of Google News, which is supposed to be tailored to a person’s particular interests. Futurism notes that the platform actually placed a Polymarket bet as the top news result when inquiring about the price of Bitcoin.

The publication saw links to the prediction market all over Google News, including in searches. It popped up in queries regarding the Strait of Hormuz, which presents a link that lets people bet on the number of ships that the critical passageway. The report even indicates that users were able to set the gambling platform as a source, which directs readers to an aggregate page of other Polymarket links.

There’s a caveat here. I wasn’t personally able to confirm most of these results. This could indicate that Google has quietly made some changes behind the scenes following Futurism’s initial report.

Advertisement

Complaints on indicate that Google started doing this at the tail-end of March. However, one user noted all the way back in January that Polymarket results had started showing up in the news section of a traditional Google search. I was able to replicate that one.

Polymarket links on Google News.

Lawrence Bonk/Google News

Engadget has reached out to Google to see just what’s going on here and if it plans to continue displaying Polymarket bets alongside actual news stories. The company did with both Polymarket and Kalshi back in November. This deal indicated the two gambling platforms would feed prediction data into Google’s finance platform, but didn’t say anything about News.

It’s pretty easy to see why Polymarket would be attractive to Google’s algorithms. The platform generates huge numbers on pages that are constantly updated. This could make these algorithms think the links are leading to valuable news stories and not, you know, a place to .

Prediction markets like Polymarket give users the ability to place bets on real world outcomes, which includes wars and other gruesome things. This has led to , which include an incident in which an unknown Polymarket user made more than $400,000 after “predicting” the capture of Venezuela’s president Nicolás Maduro invaded the country and abducted him.

Advertisement

Polymarket has hosted bets on the in current global conflicts, which is pretty dang chilling when you consider the possibility of government employees tipping the scales in their favor. President Trump did, after all, recently threaten to end an entire civilization.

Source link

Continue Reading

Tech

We Tested Every Ryzen 5 and 7 X3D CPU: From 5800X3D to 9800X3D

Published

on

Nine X3D CPUs, two platforms, and 14 games tested. We compare every Ryzen 5 and 7 X3D processor to find out how much performance has improved since the 5800X3D and where it actually matters.

Read Entire Article
Source link

Continue Reading

Trending

Copyright © 2025