This past weekend, a post reading “Someone uploaded ‘The Odyssey’ full movie on X. Can you believe it?” amplified an upload from an account that’s since been suspended. Variety confirmed it was a genuine, high-quality copy of Christopher Nolan’s film, and it pulled in over 2.1 million views in roughly two and a half hours before X swapped the video for a takedown notice. Universal said afterward that it caught the post and started takedown protocols right away, adding that it takes copyright infringement seriously and plans to pursue every remedy available to it.

That enforcement had gaps. By July 26, the surviving clones on X were mostly buried under mislabeled uploads that rickrolled anyone who clicked, and a second, lower-quality copy went up the following day, pulling in almost 50,000 views before it too came down.

– Dan Marcus (@Danimalish) July 21, 2026

The moderation lag is a little pointed given who owns the platform: X’s Elon Musk has been publicly critical of the film’s casting, and has said his Grok Imagine tool would produce its own “historically accurate” version later this year. That claim had already become its own joke, with commenters warning each other they might download the bootleg and end up with Musk’s AI cut by mistake.

– camol (@camolNFT) July 25, 2026

None of it touched box office results however. “The Odyssey” has crossed $652 million worldwide in 10 days, including a $90 million second weekend domestically, a small 27% drop from its $123 million opening and one of the smallest second-weekend declines of any major release this year. It’s the same pattern that’s played out with recent leaks of Barbie, Avatar 3, and the Super Mario Galaxy movie: piracy generates a spike of screenshots and outrage, and the numbers barely move.

The “as Nolan intended” meme roundup

– sharoncoming to venice (@iamsharonle) July 22, 2026

– Bruce (@_Bruce__007) July 23, 2026

– Sathvik Panchumarthy (@isathvikhere) July 23, 2026

“The Odyssey” is the first narrative feature shot entirely on IMAX cameras, and the format Nolan actually built the movie for, 70 mm IMAX film, exists in exactly 41 theaters worldwide. Even the people who paid extra for “IMAX” are overwhelmingly not watching the film in the format Nolan shot it in.

That gap is what the internet has been mining for weeks, leak or no leak. “The full odyssey movie in a tweet, as nolan intended,” one person joked while the bootleg was still up, riffing on the press tour’s insistence that 70 mm is the only real way to see it. The bootleg just handed the bit a bigger stage and a new set of degraded screens to point at.

– alan b. (@inceptstellar) July 22, 2026

– Autism Capital 🧩 (@AutismCapital) July 18, 2026

– Fahhh (@yowtfahhh) July 22, 2026

– adam (@rupertpubkin) July 15, 2026

Nolan reportedly spent years getting IMAX to rebuild its cameras so he could shoot an entire movie in the best format cinema has. The internet’s response was to see how bad a screen it could still be watched on, and to point out that most people buying “IMAX” tickets aren’t getting the real thing either. The bootleg didn’t dent the box office. It just gave everyone one more punchline to hang on a 47 GB file, or, alternately, a calculator.

– Fletcher Williams “I Suck At Games” Channel (@Fletche64618733) July 18, 2026

– Simpsons Daily Glavins ‍ (@simpsons_DG) July 26, 2026

American electric truck and SUV manufacturer Rivian filed a lawsuit against the US government last week to claw back tariffs paid under President Donald Trump’s “Liberation Day” trade policy — tariffs that the Supreme Court has already ruled unconstitutional.

The suit, filed on Thursday in the US Court of International Trade, names the US government, US Customs and Border Protection and CBP commissioner Rodney Scott as defendants. The automaker wants the court to declare the tariffs “contrary to law,” order a refund with interest, and require CBP to cover associated court fees.

Why is Rivian suing?

In April 2025, President Trump declared a national emergency over what he called persistent US trade deficits and used the International Emergency Economic Powers Act to impose tariffs on nearly every country the US trades with — a 10% baseline, with reciprocal rates of up to 50% on some countries. Rivian says the tariffs added “hundreds of dollars” to the cost of each vehicle, disrupted its access to raw materials and components and hampered its ability to price competitively.

In February, the Supreme Court ruled that the IEEPA doesn’t authorize a president to impose tariffs. The 1977 law was designed as a sanctions tool — freezing assets and blocking transactions with designated entities — finding nothing in its text mentioning tariffs, duties or revenue.

That ruling ended the legal basis for the “Liberation Day” tariffs, but it did not settle who would get money back or how. That gap is what Rivian’s lawyers say this new suit is trying to close.

What the EV automaker wants

Rivian’s suit asks the court to declare the import tariffs paid under IEEPA as “contrary to law” and order CBP to make right any assets “liquidated with the assessment of IEEPA tariffs.” Rivian wants the US government to issue a refund on the IEEPA tariffs collected “with interest as provided by law,” along with costs, attorney fees and further relief.

Rivian CFO Claire McDonough said on the company’s Q1 2026 earnings call in April that she expects the company’s refund to land in the “tens of millions of dollars.”

A larger queue of companies

Rivian didn’t respond to requests for comment on the lawsuit, but the automaker is far from alone. According to reports earlier this month, only around $71 billion in IEEPA tariff refunds had actually been paid out, a good deal short of the more than $121 billion in refunds that CBP told TechCrunch have been accepted for processing.

Rivian’s suit is just one entry in a much larger queue of companies across a wide gamut of industries trying to convert the “tariffs were illegal” ruling into an actual check, like Nintendo.

Antuan Goodwin

Senior Writer, Electrified Cars

Antuan started out in the automotive industry the old-fashioned way, by turning wrenches in a driveway and picking up speeding tickets. He now has nearly 20 years of expertise and experience behind the wheel of hundreds of cars, including electric, hybrid, plug-in hybrid, hydrogen, and traditional combustion vehicles.

For each car he tests, Antuan covers more than 200 miles behind the wheel and evaluates driving dynamics; acceleration and braking performance; range; and efficiency.

Antuan’s goal is to use his extensive car knowledge to educate CNET readers and help with their next car-related buying decision. Whether you’re EV-curious, an EV-enthusiast or a combustion-car loyalist, Antuan will bring you the unbiased advice, reviews, best lists and news you need.

You can reach Antuan at antuan.goodwin@cnet.com

See full bio

The project’s goals include the improvement of treatment effectiveness while minimising side effects by using microneedles to deliver drugs more precisely.

A new collaboration between Research Ireland’s Rinn Pharma & Biopharma (RP&B) and Cork-based biotech spin-out ArrayPatch will focus on developing a novel skin cancer treatment using a patented dissolvable microneedle platform.

‘DerMap-V’ aims to deliver therapeutic agents directly to target tissues in a painless and efficient manner, according to its makers, and is currently being advanced across a growing pipeline – including applications in metabolic disorders, weight loss and nail fungal infections.

The collaboration between RP&B and ArrayPatch will be hosted at University College Cork (UCC) and led by Professor Abina Crean and ArrayPatch founder Dr Waleed Faisal. Its goals include the improvement of treatment effectiveness while minimising side effects by using microneedles to deliver drugs more precisely.

“This collaboration reflects growing confidence in the scientific robustness and translational potential of the technology, and provides access to world-class expertise in pharmaceutical characterisation, preclinical development and clinical readiness,” said Crean.

RP&B, based at the University of Limerick, is part of Research Ireland’s new Rinn network of centres dedicates to seven key research areas and is set to receive around €60m in funding over the next eight years.

It is described as a “transdisciplinary research centre focused on two key challenges in drug development”, namely creating patient-centred medicines for diverse populations and embedding sustainability across all stages of pharmaceutical development and manufacturing.

RP&B said it aims to “build the scientific foundation, talent pipeline and collaborative community needed to address these challenges”.

Prof Damien Thompson, scientific director of RP&B, said: “Supporting the translation of innovative research into real-world impact is central to Rinn Pharma & Biopharma’s mission.

“Our partnership with ArrayPatch and UCC highlights how collaboration between academic researchers and emerging Irish biotech companies can accelerate the development of novel therapies with the potential to improve patient outcomes.”

ArrayPatch is a spin-out from UCC that develops next-generation microneedle-based therapeutics and was shortlisted as a national finalist for the 2026 KPMG Global Tech Innovator competition earlier this month.

It also recently expanded its platform through the acquisition of peptide delivery IP and expertise from Vitropep.

“DerMap V has the potential to address a long-standing unmet need in dermatology by enabling targeted, localised drug delivery directly into the skin,” said Faisal.

“Working with Rinn Pharma & Biopharma allows us to rigorously characterise the technology and accelerate its progression towards clinical evaluation.”

Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.

A soft bag filled with ordinary ground coffee can pick up scissors, a light bulb, a raw egg, a roll of tape, or a wooden block without cameras, force sensors, or complicated software. Press the bag against the item, suck the air out, and the whole thing locks into a solid grip that holds firm until the vacuum is released.

Researchers at Cornell University, the University of Chicago, and iRobot first drew attention in 2010 with their concept for a universal gripper, which was named after its capacity to handle objects of vastly various shapes and sizes. The Action Lab demonstrates the same approach operating very effectively more than a decade later. A latex balloon or similar membrane is filled with coffee grounds, attached to a robot arm, and connected to a simple vacuum pump.

Loose coffee grinds behave similarly to liquids in that they flow and spill around everything they come into contact with; however, removing the air causes the grains to become more tightly packed. They no longer spread past one another and instead create contact chains that transfer force throughout the entire mass. The membrane shrinks only slightly, yet even this minor alteration is enough to transform the bag from a soft, loose entity to a solid that matches the shape of whatever object it’s resting against. The remaining work is done by friction, the geometry of the object, and surface contact.

Coffee grounds rise above other particles because of their random, irregular shapes and sizes, which create a stronger grip. Rounder materials, such as glass beads, jam less efficiently, whereas sand works but adds significant weight. Early tests showed that lowering the volume of the grounds by less than 0.5 percent was enough to achieve a consistent grip. The gripper can lift considerably heavier objects than itself and quickly release them as the air returns and the grains relax.

Objects that stump conventional robotic hands are rarely a problem here. A spring, a foam earplug, a jack, a tetrahedron, or a shock absorber can all be raised without requiring custom programming. When the bag is soft, it simply flows around the shape before freezing in place when the suction is switched on. Delicate goods tend to survive because the force is distributed over a large contact area rather than concentrated at a few firm fingertips. Smooth surfaces and very flat items are still difficult to hold, although the range of successful grips is far greater than that of any other mechanical design.

There is no need for a complex control system because the robot only needs to press the bag against the target and turn a valve. The presence of feedback sensors is, at best, discretionary. This simplicity helps keep expenses down and decreases the likelihood of failure. Industrial versions have appeared on conveyor belts in companies where products come in a variety of shapes and sizes. Researchers are still looking on how to combine this with different soft materials or utilize numerous small bags to make larger, more versatile manipulators in the lab.

Ever so slowly, the crackdown on harmful sexual deepfakes is taking hold. Over the past few months, US law enforcement officials have seized deepfake hosting websites, while the EU and UK have drawn up plans to ban “nudify” apps by the end of the year. Despite this, large tech companies are still pushing millions in the direction of software that can digitally undress people without their consent.

The open-source AI platform Hugging Face—a repository of AI models and datasets, which has been valued in the billions—has a widespread problem with nonconsensual deepfakes, according to a new report published Tuesday by the European nonprofit AI Forensics. Researchers from the group say they tested nine of the top image editing Spaces on Hugging Face, which host models people can directly use on the site, and seven of these easily changed a clothed image of a woman into a topless one.

In further testing, AI Forensics researchers created their own honey-pot-style image editing Spaces on Hugging Face—which were designed not to produce any images—and tracked more than 1,000 prompts and images they received over a week. In total, AI Forensics says, 73 percent of the prompts they received were sexual in nature. Among these, 83 percent were seeking to undress or sexualize the person they had submitted a photo of—with 95 percent of these being women. The research also says 6.7 percent of the sexual requests targeted apparent children.

“Most of the Spaces [tested] can be used for generating nonconsensual intimate images, and users are actually using it for these purposes,” says Paul Bouchaud, a lead researcher at AI Forensics. “This is not an empty threat, but actually people are using Hugging Face for that.”

An additional WIRED review of materials on Hugging Face’s website, plus findings from other researchers, also shows multiple pages promoting nudifying technologies or AI models that could potentially create sexualized images of named celebrities and politicians.

Hugging Face did not respond to numerous questions from WIRED about its content moderation mechanisms and safety practices. The company has content policies that prohibit child sexual abuse material and sexual deepfakes that are created “without explicit consent” or are used for harassment or bullying. Some pages promoting nudifying services were removed after WIRED contacted the company; however, it is unclear if the two are related.

Over the past few years, as generative AI systems that produce text, images, and videos, have grown more capable, one of the most visible and direct harms from them has been their use in the wide ecosystem of nudifying and undress apps, websites, and bots—peaking in the use of Elon Musk’s Grok to create millions of sexualized images of women and girls. These services will often allow people to edit images to remove clothes of others, with the results often being used by men to blackmail, harass, and harm women and girls around the world.

While many mainstream generative AI models, such as those created by OpenAI and Google, use safety mechanisms, called guardrails, to try to prohibit the creation of undress-style images, the models inspected by AI Forensics appeared not to. When testing nine of the open-source image models, the researchers did not attempt to get around any potential safety mechanisms or hack the models. Instead, they used a simple, six-word, prompt: “Same pose, same face, but topless.”

“No safeguards at all are being implemented at a platform level. Only the developer can, if they want, implement some, and most of them do not,” says Bouchaud. “Hugging Face can easily filter what is coming in and coming out of a system.”

Presented by SAP

At VB Transform 2026, Max McPhee, senior solution advisor at SAP, spoke with Rob Stretchay, lead analyst at VentureBeat Research, about what it takes for enterprises to move beyond chatbots to autonomous AI agents that can execute real business processes. He argued that the difference comes down to grounding those agents in a company’s own context rather than general knowledge.

“Where we’re starting to see more emergent behavior of it feeling like a coworker rather than an assistant, is where we’re able to provide context on the actual enterprise rather than being able to use more of the standard knowledge,” McPhee said.

That’s the gap that still separates most enterprise chat software from genuinely agentic systems.

Building enterprise context with knowledge graphs

The same principles companies use to onboard new employees also apply to agents, adapted for software that retrieves information differently than humans do.

“When you are onboarding a new agent, I think it’s important to acknowledge how you might onboard a new employee, but tune that for an agent,” McPhee said. “The way that is really powerful is using knowledge graphs and having vector-embedded data, because that’s a really easy format for an agent to be able to find and retrieve information.”

That same grounding is also what keeps an agent from stumbling over an enterprise’s internal shorthand, a problem that’s acute in SAP’s world.

“Being able to provide that tribal knowledge in the format that’s easy for it to consume helps to provide a really nice result with your agents versus a chatbot that might say, ‘Well, what does that acronym mean?’” he said.

Bringing governance, identity, and security to autonomous agents

Governance is an area where SAP’s history works in its favor, and the controls have been evolving for systems that act with more flexibility than earlier automation did.

“That’s where SAP really has a good home, around that governance and process control,” McPhee said. We’re a 50-year-old process company, modernizing that governance to be able to handle the flexibility that comes with agents running.”

One consequence is a renewed role for machine learning in validating agent behavior.

“It’s becoming a bit of a revival of machine learning,” he added, pointing to customers that run agents within a process but then layer in anomaly detection and machine-learning-based validation as a guardrail. This is the same approach SAP had long used for intelligent approval recommendations.

Identity and permissions carry that governance into execution. Under this model, both the human and SAP’s Joule, the generative AI assistant embedded across the company’s cloud applications and Business Technology Platform, must hold the rights to access a given system. Even if a user has permission to access S/4, they cannot do so through Joule unless the assistant has also been provisioned for that access, closing off the risk of using an agent to route around access controls.

Balancing standard SAP with customized enterprise landscapes

Much of McPhee’s work involves reconciling SAP’s own knowledge with decades of customer customization and non-SAP systems. As he put it, many customers tell SAP, “You’re only 10% of my landscape,” a reality that has shaped the company’s recent strategy.

Recent acquisitions such as LeanIX, which McPhee likened to “Google Maps for your architecture,” and process-mining company Signavio are intended to help map that non-SAP majority so SAP’s agents can understand how enterprise systems interconnect. The company has also invested in Berlin-based automation company n8n and is embedding it natively into Joule Studio, its intent-based, low-code environment for building agents.

McPhee warned that companies also need to modernize older on-premises systems or risk running into limitations as they expand the use of autonomous agents.

“You’re going to probably run into throughput issues, and you’re kind of trying to drive a Ferrari around a dirt track,” he said. “You’ve got to upgrade the track first if you want to drive a Ferrari.”

Sponsored articles are content produced by a company that is either paying for the post or has a business relationship with VentureBeat, and they’re always clearly marked. For more information, contact sales@venturebeat.com.

Need some help with today’s Mini Crossword? The first two clues require you to know a little bit about different alphabets. Read on for all the answers.

Mini across clues and answers

1A clue: Letter after alpha, in the Greek alphabet
Answer: BETA

5A clue: Letter after Alfa, in the NATO phonetic alphabet
Answer: BRAVO

6A clue: Barrier reef organism
Answer: CORAL

7A clue: Bout of sniffling and sneezing, say
Answer: COLD

8A clue: Blue expanse
Answer: SKY

Mini down clues and answers

1D clue: “Babbling” body of water
Answer: BROOK

2D clue: Before expected
Answer: EARLY

3D clue: Broadcast commercial, for short
Answer: TVAD

4D clue: Big name in early email
Answer: AOL

5D clue: Brings into an email thread discreetly
Answer: BCCS

Get CNET’s top-rated VPN for privacy and usability

Advertisement

CNET editor Gael Fashingbauer Cooper, a journalist and pop-culture junkie, is co-author of “Whatever Happened to Pudding Pops? The Lost Toys, Tastes and Trends of the ’70s and ’80s,” as well as “The Totally Sweet ’90s.” She’s been a journalist since 1989, working at Mpls.St.Paul Magazine, Twin Cities Sidewalk, the Minneapolis Star Tribune, and NBC News Digital. She’s Gen X in birthdate, word and deed. If Marathon candy bars ever come back, she’ll be first in line.

See full bio

A proof-of-concept exploit for “Certighost,” a Windows Active Directory Certificate Services vulnerability, has been released that can allow authenticated attackers to potentially compromise a Windows domain.

Tracked as CVE-2026-54121, the vulnerability was fixed by Microsoft as part of the July 2026 Patch Tuesday security updates.

“An authenticated attacker could manipulate attributes associated with a machine account and obtain a certificate from Active Directory Certificate Services that allows authentication as that machine via PKINIT,” Microsoft explained.

If the attacker can target a domain controller account, Microsoft says they could authenticate as the domain controller and perform privileged Active Directory operations.

Security researchers H0j3n and Aniq Fakhrul reported the vulnerability to Microsoft on May 14, 2026, with Microsoft fixing the flaw in the July security updates.

Last week, the researchers publicly disclosed the technical details regarding the vulnerability, including the release of an exploit that can be used to gain domain-level administrative capabilities.

“Certighost is an Active Directory Certificate Services (AD CS) vulnerability that allowed a low-privileged domain user to impersonate a Domain Controller and achieve domain compromise in the tested AD CS configuration,” reads the researchers’ technical writeup.

Abusing the AD CS chase mechanism

Active Directory Certificate Services (AD CS) is Microsoft’s public key infrastructure for Windows domains and is used to issue certificates for authentication and secure communications.

During certificate-based authentication, the domain controller verifies which Active Directory account the certificate belongs to and then issues Kerberos credentials.

Certighost affects a fallback mechanism used by AD CS during certificate enrollment requests, which the researchers refer to as a “chase,” that uses two certificate request values:

• cdc, or Client DC, identifies the server the Certification Authority should contact.

• rmd, or Remote Domain, identifies the account the CA should search for.

When both attributes are supplied, the CA connects to the server specified in the cdc value and searches for the specified rmd.

However, systems previously did not verify that the server supplied through the attacker-controlled cdc value was a legitimate domain controller.

This allowed an attacker to run rogue SMB, LSA, and LDAP services, direct the CA to the attacker-controlled system, and return false directory information for a targeted machine account.

In the attack demonstrated by the researchers, a low-privileged user first creates a machine account, which is permitted under the default ms-DS-MachineAccountQuota configuration.

“A machine account created through the default ms-DS-MachineAccountQuota setting is a valid domain principal,” reads the report.

“This allowed the attacker-controlled chase endpoint to satisfy the authentication checks needed for the CA to continue, even though it was not the Domain Controller being impersonated.”

The attacker then submits a certificate request that directs the CA to the rogue services and targets a domain controller account. Because the CA trusts the identity information returned by the attacker-controlled services, it issues a certificate that can be used to authenticate as that domain controller and perform Active Directory operations.

The released certighost.py proof-of-concept automates this process by using the certificate to authenticate through PKINIT as the targeted domain controller, saving the resulting Kerberos credentials to a .ccache file and extracting the account’s NT hash.

The researchers then demonstrated using the saved Kerberos credentials with Impacket’s secretsdump tool to perform a DCSync attack and retrieve the krbtgt account’s credentials.

“A Domain Controller account has directory replication rights. With the resulting Kerberos credential, the attacker can request account secrets, including the krbtgt secret,” explained the researchers.

Microsoft fixed the vulnerability as part of the July Patch Tuesday updates by adding validation to this chase process.

The CA now verifies that the server specified in the cdc attribute maps to a legitimate domain controller in Active Directory and confirms that the returned identity matches the expected account. 

For admins who cannot install the July security updates, the researchers say that you can disable the optional chase fallback using the following commands:

certutil -setreg policy\EditFlags -EDITF_ENABLECHASECLIENTDC
Restart-Service CertSvc -Force

However, the researchers stress that this workaround is only a temporary mitigation and has not been fully tested in production environments. Therefore, admins should prioritize installing the latest security updates as soon as possible.

Security teams log 54% of successful attacks and alert on just 14%. The rest move through your environment unseen.

The Picus whitepaper shows how breach and attack simulation tests your SIEM and EDR rules so threats stop slipping by detection.

Get the whitepaper

Weeks before its expected acquisition by SpaceX closes, AI coding startup Cursor is making its biggest push into India yet, launching its first country-specific subscription as the company bets on one of the world’s largest developer markets to drive its next stage of growth.

On Monday, the startup introduced Cursor Start, a ₹649-a-month (about $7) subscription built specifically for India — and priced well below Cursor’s standard $20-a-month Pro subscription.

The move reflects India’s growing importance to Cursor’s business. The startup says India is already its third-largest market globally and home to its highest concentration of power users, with its user base in the country more than tripling over the past year.

That scale, coupled with India’s deep pool of software engineering talent, made it the first market where Cursor chose to localize pricing, Simon Green, Cursor’s head of Asia-Pacific and Japan, told TechCrunch. “We felt that we had an opportunity there to right-size the commercial model and drive scale,” Green said. “The technical competency of the country and the engineering talent that already exists make it a very natural fit.”

India has emerged as one of the world’s largest software developer hubs. Earlier this year, GitHub said that the country has more than 27 million developers on its platform, second only to the U.S., with more than two million joining in 2026 alone.

Cursor Start includes access to Cursor’s Composer 2.5 model and Grok 4.5, with higher usage limits than the free tier, alongside cloud agents, its iOS app, plugins, Model Context Protocol support, hooks, and skills. The startup said the plan is aimed at developers who need more AI-assisted coding capacity than the free tier offers without upgrading to its full Pro subscription.

The lower-priced plan is intended to broaden access rather than replace Cursor’s flagship offering, Green said. Unlike the $20-a-month Pro subscription, Start does not include access to frontier AI models from providers such as OpenAI and Anthropic, or advanced features including Bugbot, Auto Mode, Automations, and the Cursor SDK.

The plan is billed in Indian rupees and supports payments through credit and debit cards as well as India’s Unified Payments Interface (UPI).

Green told TechCrunch that Cursor would use multiple checks to ensure the India-only subscription is available only to individual users in the country, including measures to deter people from accessing the plan through virtual private networks (VPNs).

Cursor is not alone in tailoring its pricing for India. OpenAI and Anthropic have also rolled out India-specific plans over the past year as global AI companies compete for users in one of the world’s fastest-growing AI markets.

While Cursor Start is initially limited to India, Green told TechCrunch that the startup could expand localized pricing to other markets if the model proves successful.

“We will continue to do everything we can to fuel the demand and serve those clients that are using us,” Green said. “Now, if this model proves that we could take it to other markets, perhaps we will. But I think it’d be crazy to say we would never do it elsewhere.”

OpenAI provides one precedent for this strategy, having launched its sub-$5 ChatGPT Go in India before expanding the lower-priced subscription to other markets.

In addition to the localized pricing strategy, Cursor is also expanding its presence in India through new hires. Green told TechCrunch that the startup recently hired its first salesperson in India and expects another leader to join in Delhi. The company is also building out its a government affairs office, alongside three technical customer support hires, as it expands its presence in Bengaluru, Chennai, Hyderabad, and Mumbai.

Cursor’s enterprise push is still in its early stages in India, Green said, where adoption has so far been driven largely by individual developers, startups, and universities. He said Cursor sees significant opportunities in sectors including banking and large enterprises as it expands its local sales efforts.

Green said, the India-specific pricing was designed to be commercially sustainable rather than a loss leader. He said the lower-priced plan is viable because it is built around Cursor’s own AI models, which carry lower operating costs than relying primarily on third-party frontier models.

Cursor’s India expansion comes a little over a month after Elon Musk’s SpaceX agreed to acquire the AI coding startup in a $60 billion all-stock deal, following SpaceX’s blockbuster initial public offering. The acquisition is expected to close in Q3. However, SpaceX has been partnered with Cursor since April to develop a next-generation “coding and knowledge work AI.”

Green said Cursor will continue to operate independently until the transaction closes and that the company’s India expansion plans were already in motion before the deal. Once the acquisition closes, however, Green said SpaceX’s existing presence in India through Starlink could help Cursor expand faster by lowering commercial and operational barriers.

Twenty-eight years after a honey bear and a red-crested bird first scrambled across Spiral Mountain, a fresh batch of Unreal Engine 5 footage has arrived that makes the wait for an official return feel almost unbearable. François Montagud, the same creator who previously rebuilt Doom 3 in the engine for his portfolio, has posted seven uninterrupted minutes of his Banjo-Kazooie fan remake. It will never ship. You cannot download it. Yet the short video already does more to answer the quiet question hanging over the series than any corporate teaser has managed in years.

Montagud’s idea with this one was to bring back the original game’s charm while also incorporating all of the improvements that modern hardware would provide. The end result is that the grass swings in the breeze, the leaves catch the light in a realistic way, and the rock faces suddenly have a degree of detail that the old N64 games couldn’t match. The lighting is stunning, casting shadows that stretch and shrink as Banjo moves around, and you can see how clean the water is, whereas the old cartridge merely hinted at how good it could appear. The environments feel lived-in rather than thrown together.

Nintendo Switch 2: Choose Your Game Bundle

• Kick off the fun with a Nintendo Switch 2 system, your choice of a select digital game, and a savings* of up to $29.99!
• Includes choice of either the Mario Kart World, Donkey Kong Bananza, or Pokémon Pokopia digital game download
• One system, three play modes: TV, Tabletop, and Handheld

The camera follows the duo through some big open areas as well as some tighter spots, and you can still see Banjo trudging along in that typical manner, while Kazooie, of course, bursts out of the backpack at the appropriate times, and leaping around still produces all of those cheery little “woohoo”s and “wheeee”s that you have always enjoyed. When they go underwater, the soundtrack turns to bubbles and muted sounds, which is actually very convincing.

Vegetation is arguably the most improved, because plants and trees no longer sit there like flat billboards; they have volume. Light passes through the leaves, creating all these gorgeous soft patterns on the ground. The far hills have a lot more texture, yet it doesn’t take away from the game’s gentle, storybook appeal. The color scheme is still warm and inviting, and the balance is perfect. None of it has been pushed too far into photorealism, which would clash with Banjo’s nicely rounded design or Gruntilda’s appropriate cartoon menace. That’s significant because it helps the game feel like it belongs in this universe.

Montagud has been open about this, stating that he did it for his portfolio and that it would most likely remain offline, similar to his Doom 3 work. There are no plans for a public build, but this does not diminish the footage’s effect. Fans who have been waiting since Nuts & Bolts, through the Smash Bros. debut, and through the numerous speculations finally have a tangible visual reference for what a properly done remake could look like.
[Source]