Technology

This Sharge CarbonMag is perfect for your iPhone 16, now $45

Published

4 hours ago

September 27, 2024

This Sharge CarbonMag is perfect for your iPhone 16, now $45

The iPhone 16 is here and you’re going to want something just as sleek to keep it topped up with power when you’re out and about, and that’s why we’re highlighting this deal on the Sharge CarbonMag power bank that Amazon is currently offering.

Usually, this little accessory retails for $60 at its full price. However, right now Amazon is offering it with a 25% coupon that drops it down to $45. So you end up saving $15 and get a cool (and useful) little accessory for your brand-new phone. The Sharge CarbonMag, as the name suggests, is a MagSafe power bank that snaps onto the back of your iPhone 16 (or Android phone with a MagSafe-compatible case) to give your device that extra bit of power when it’s most needed.

This power bank has a 5,000mAh capacity, so there’s more than enough juice to get your iPhone 16 a full charge. Plus a little more if needed by the end of the day. The CarbonMag is also made of ultra-lightweight carbon fiber. While it’s still a battery pack that will add some extra weight to your phone, its slim design and carbon fiber build will help cut down on that as much as possible.

It’ll charge your device at 15W with wireless charging using the MagSafe connection, but if you want a little bit more speed, it is possible. The CarbonMag also supports 20W wired charging. So you just snap it onto the back of your phone, then plug the CarbonMag in through its USB-C port. Now you’re charging the phone at 20W and charging up the CarbonMag at the same time.

This power bank is thinner than the iPhone too, so it’ll easily fit into your pocket when attached.

Buy at Amazon

Source link

Servers computers

Supermicro’s H13 GPU Systems ft. @LinusTechTips

Published

33 seconds ago

September 28, 2024

NewsAdmin

Supermicro’s H13 GPU Systems ft. @LinusTechTips

Linus goes face to face with the 8U uGPU system featuring 8x NVIDIA H100 GPUs, and the flexible 4U GPU systems offering maximum acceleration to tackle the most intensive HPC, AI, ML applications out there.

Supermicro H13 Website: https://www.supermicro.com/en/products/aplus
H13 Jumpstart Program: https://www.supermicro.com/jumpstart/h13
AMD EPYC™ Website: https://www.amd.com/en/processors/epyc-server-cpu-family

Learn more
Supermicro H13 Website: https://www.supermicro.com/en/products/aplus
H13 Jumpstart Program: https://www.supermicro.com/jumpstart/h13
AMD EPYC™ Website: https://www.amd.com/en/processors/epyc-server-cpu-family

Subscribe to Supermicro
Newsletter: https://www.supermicro.com/en/news/newsletter-sign-up
YouTube: http://bit.ly/2eIqOCu

Follow Supermicro
LinkedIn: https://www.linkedin.com/company/supermicro
Twitter: https://twitter.com/Supermicro_SMCI
Facebook: https://www.facebook.com/Supermicro
Instagram: https://www.instagram.com/supermicro_SMCI

source

Technology

Tech Life: Mapping a changing world

Published

4 mins ago

September 28, 2024

NewsAdmin

How live updating of online maps is helping humanitarian work around the world.

Source link

Technology

Artificial flavours released by cooking aim to improve lab-grown meat

Published

25 mins ago

September 27, 2024

NewsAdmin

Artificial flavours released by cooking aim to improve lab-grown meat

Cultured meat, with added flavour
Yonsei University

Lab-grown meat could get a flavour boost thanks to aromatic chemicals that activate when cooked, releasing a meaty smell – or if you prefer, that of coffee or potatoes.

Meat grown from cultured cells can already be created in various forms that resemble slaughtered meat, including steak and meatballs, but matching the taste has proven more challenging. Traditional meat flavours are extremely complex and volatile and don’t survive the lengthy laboratory process.

One key component of the taste of cooked meat is the Maillard reaction, named after a French chemist who discovered that unique flavours are created in cooked food at between 140 and 165°C (280 to 330 °F). Jinkee Hong at Yonsei University in Seoul, South Korea, and his colleagues say they have worked out a way to simulate the Maillard reaction by adding “switchable flavour compounds” (SFCs) into a 3D gelatine-based hydrogel, called a scaffold, that remain stable while the meat is cultured.

Once heated to 150°C, the chemicals “switch on” and release their flavours, improving the cultured protein’s palatability. “We actually smelled the meaty flavour upon heating the SFCs,” says Hong, though he wouldn’t confirm whether the team had actually eaten the meat.

These SFCs can also be used to create different flavour profiles. For example, the researchers tested three compounds and say they produced flavours simulating roasted meat, coffee, roasted nuts, onions and potatoes. “We can diversify and customise the flavour compounds released from the SFC,” says Hong.

One big issue is that the chemicals involved aren’t currently seen as safe for human consumption. “Because the materials and culture medium are not approved as edible materials, we cannot ensure the safety of it,” Hong says. “However, we think that our strategy can also be applied to conventional edible materials, which would be safer than the materials used in this study.”

Johannes le Coutre at the University of New South Wales in Sydney, Australia, says he is sceptical of the work for numerous reasons, including that the flavour tests predominantly used an electronic nose to assess the chemicals being released, rather than human judgement of whether they smelled appetising.

“You cannot nourish human beings with this type of material,” says le Coutre. “While cell-based meat is a promising technology concept, this particular way of adding flavour will never provide safe and sustainable protein for low and middle-income communities that need food.”

Topics:

Source link

Servers computers

Cara Merakit Rack Server 42U Perforated Door

Published

33 mins ago

September 27, 2024

NewsAdmin

Cara Merakit Rack Server 42U Perforated Door

https://tokopedia.link/BOdpxiBQyib

WhatsApp wa/me8973379900

source

Technology

GTA V for PlayStation 5 is only $20 today — normally $40

Published

47 mins ago

September 27, 2024

NewsAdmin

GTA V for PlayStation 5 is only $20 today — normally $40

Best Buy has cut the price of Grand Theft Auto V by 50% and if you don’t already own it, you really need to buy it right now.

Source link

Servers computers

Slimming down to 2U! SFF Rackmount Gaming PC

Published

1 hour ago

September 27, 2024

NewsAdmin

Slimming down to 2U! SFF Rackmount Gaming PC

HUGE thanks to Micro Center for sponsoring this build! Here are links for their offer:

New Customer Exclusive – $25 Off ALL CPU’s: https://micro.center/yww
Shop Micro Center’s February BYO Deals: https://micro.center/fbi
Check out Micro Center’s Custom PC Builder: https://micro.center/b9o
Submit your build to Micro Center’s Build Showcase: https://micro.center/0jn

Parts used in this build (some links are affiliate links):

– MyElectronics’ 2U Mini ITX case: https://www.myelectronics.nl/us/19-inch-2u-mini-itx-case-short-depth.html
– Intel i5-13400 CPU: https://amzn.to/3K5bgJ1
– ASRock Z790M-ITX WiFi Motherboard: https://amzn.to/3YOnLwF
– CORSAIR Vengeance DDR5-5200 RAM with XMP: https://amzn.to/3lDqzi3
– LIAN LI SP 750 SFX PSU: https://amzn.to/3lGtUg4
– PNY Nvidia RTX A2000 12GB graphics card: https://amzn.to/3YobvmV
– be quiet! Pure Wings 80mm BL044 Case fans: https://amzn.to/3S23mCd
– Noctua NH-L9i-17xx Low-Profile CPU cooler: https://amzn.to/3EaWKMi
– 3.5mm Keystone Audio Jack: https://amzn.to/3YRPIUA
– Nanxudyj 3.5mm 1ft Audio Cable: https://amzn.to/3Ea26HD
– KIOXIA XG8 NVMe SSD: https://americas.kioxia.com/en-us/business/ssd/client-ssd/xg8.html

And here’s a link to the build from Micro Center (excluding the things I bought separate): https://www.microcenter.com/site/content/custom-pc-builder-intel.aspx?load=fe3f5ada-d5a2-4773-a2f3-28a25a21f8c5

Also mentioned in this video:

– LTT Personal Rig Update (Late 2021): https://www.youtube.com/watch?v=TgRXE9mUHJc
– LTT Heating my pool with computers: https://www.youtube.com/watch?v=4ozYlgOuYis
– It BROKE! LTT Screwdriver 6-month review: https://www.youtube.com/watch?v=uwoc6c4PMfU

Support me on Patreon: https://www.patreon.com/geerlingguy
Sponsor me on GitHub: https://github.com/sponsors/geerlingguy
Merch: https://redshirtjeff.com
2nd Channel: https://www.youtube.com/c/GeerlingEngineering

#Sponsored #MicroCenter #Homelab

Contents:

00:00 – Too much power?
00:48 – Short-depth 2U rackmount case
01:19 – Micro Center!
01:58 – SFF ask the expert
04:07 – Case closed… and opened!
05:08 – Assembling the motherboard
08:37 – I actually showed the thing!
09:00 – It’s coming together
10:35 – Front panel USB and a GPU to see
12:43 – It’s a lot heavier for its first boot
13:46 – No case is perfect
14:52 – Quieter AND faster!
15:34 – Gaming at 1080p
16:20 – Other SFF options and another build .

source