The Dow closed at a record on Wednesday on signs of progress for a peace deal with Iran, while the Nasdaq saw its first decline in five sessions as SpaceX and AMD stumbled following their quarterly earnings. A proposed deal between Iran and Oman would give Tehran control over ships entering the Gulf through the Strait of Hormuz, a senior Iranian source and two regional officials told Reuters, in one of the ‌biggest concessions yet ⁠to Iran.

Stocks ⁠rallied to start the week, with the Dow and S&P 500 closing at records on Tuesday, as oil prices and U.S. Treasury yields dropped on hopes peace talks could lead to a deal, easing inflation pressures and lowering expectations for a rate hike from the Federal Reserve.

“It’s just a straight rocket shot that we’ve gone up, we didn’t ​even take a breath,” said Kenny Polcari, chief market strategist at Slatestone Wealth in Jupiter, Florida.

“It’s progress, but the market’s just going, we’re not going to give it to you this time until we actually see the progress, because how many times have we been jerked around over ​the last four months?”

According to preliminary data, the S&P 500 lost 13.33 points, or 0.17%, to ⁠end at 7,723.19 ‌points, while the Nasdaq Composite lost 225.32 points, or 0.85%, to 26,359.67. The Dow Jones Industrial Average rose 264.04 points, ​or 0.49%, to 54,349.92.

SPACEX ​SHARES TUMBLE ON AI SPENDING CONCERNS
Elon Musk-led SpaceX’s revenue nearly doubled and operating losses narrowed in its first ⁠earnings report since going public, fueled by its booming Starlink satellite communications and AI businesses, but ​shares tumbled on concerns about how long the company could maintain spending on AI-related investments such as ​data centers. Shares could face additional pressure from the expiry of the stock’s post-IPO lock-up period starting on Thursday.Advanced Micro Devices forecast quarterly revenue above estimates, reflecting strong AI demand. However, shares dropped as investors look for greater evidence the massive AI spending will result in faster growth. A gain in Amgen helped buoy the Dow, as second-quarter sales for the drugmaker rose 9%. Rival Eli Lilly also advanced after raising its full-year revenue forecast and the S&P 500 healthcare closed as one of the best-performing sectors on the session. Also helping to boost the Dow was a rise in Disney shares ‌after beating third-quarter profit expectations.

ADP PRIVATE PAYROLLS GROWTH SLOWS

On the data front, U.S. private payrolls growth slowed in July, as per the ADP national employment report. The data was the second in a string of reports on the labor ​market this week before ​Friday’s government payrolls report. Separately, the Institute for ⁠Supply Management said its nonmanufacturing purchasing managers index inched up to 54.1 last month from 54.0 in June, below the 54.5 estimate of economists polled by Reuters but above the 50 threshold that signals growth.

Data has largely reflected a stable labor market, but the war with Iran that began at the end of February has kept concerns about price pressures and the Fed’s response to it as a primary concern among investors. Minneapolis Fed President Neel Kashkari said in an interview with CNBC that he believed now is the time to start slowly moving interest rates higher. Federal Reserve Board Governor Lisa Cook and San Francisco Fed President Mary Daly are scheduled to speak later in the day. Expectations for a rate hike from the central bank at its September meeting have dipped to 54.9%, according to CME FedWatch, down from 58.3% a week ago.

Operator

Thank you for standing by. My name is Carly, and I will be your conference operator today. At this time, I would like to welcome everyone to the NCR Voyix Corporation Second Quarter 2026 Earnings Conference Call. [Operator Instructions] I would now like to turn the call over to Sarah Jane Schneider, Vice President of Investor Relations. Please go ahead.

Sarah Jane Schneider

Good morning, and thank you for joining our second quarter 2026 earnings conference call. This morning, we issued our earnings release reporting financials for the quarter ended June 30, 2026. A copy of the earnings release that we will reference during this call is available on the Investor Relations section of our website, which can be found at www.ncrvoyix.com and have been filed with the SEC.

With me on the call today are Jim Kelly, our Chief Executive Officer; Nick East, our Chief Product Officer; Darren Wilson, President, Retail and Payments; Benny Tadele, President, Restaurants; and Brian Webb-Walsh, our Chief Financial Officer. This call is being recorded, and the webcast is available on the Investor Relations section of our website. Before we begin, please be advised that remarks today will contain forward-looking statements.

These forward-looking statements are subject to

Most of the manufacturing firms in the United Kingdom have been experiencing continuous overspending and delayed deliveries due to the process of developing prototypes into large scale manufacturing. In many instances, complicated geometries lead to material waste above 30%.

The problem originates from inadequate engineering design for manufacturability at an early stage of designing the product. This is caused by the traditional approach in which there is no connection between the engineering drawing and the process on the floor, which creates a loop of reworking. Using optimized sheet metal DFM with precision techniques would solve the problem of tooling resets and material savings.

Why Do Unoptimized Sheet Metal Designs Cause Budget Overruns for OEM Component Manufacturing?

Suboptimal designs lead to cost escalation throughout OEM component manufacturing processes. There are three design flaws that compel manufacturers to process parts through slow techniques and expensive equipment: excessive tolerances, improper bend radii, and positioning holes too close to bend lines.

Excessive Tolerances Drive Scrap Rates Above 35%

The analysis of engineering data reveals that excessive tolerances on non-critical features lead to scrap levels up to 38%. Every scrapped part wastes material, manufacturing time, and labor resources without any monetary gain. In case of complex sheet metal components, these losses can easily accumulate across many manufacturing batches.

Improper Bend Radii Increase Tooling Changeovers

Non-standard bend radii call for special setup of tooling that takes additional 20-30 minutes each time it changes. According to The royal academy of engineering – UK manufacturing reports, about 30% of costs related to manufacturing supply chain come from design mistakes identified through the process of DFM analysis. Sheet metal fabrication cost reduction process starts with setting standards for radius that fits the available tooling libraries.

What Are the Most Critical Sheet Metal DFM Guidelines for Engineering Teams?

Knowledge of basic sheet metal DFM guidelines helps to identify the risks connected with manufacturing process at the stage of engineering. There are four key factors that need special consideration: K-factor constancy, wall thickness homogeneity, relief cut position and distance between holes and bends.

K-Factor and Wall Thickness Control Bending Accuracy

The practice of ensuring consistent values for K-factors in all bends eliminates dimensional distortion in multi-bend assemblies. Consistency of wall thickness reduces stress concentrations leading to cracking when forming. This constitutes the basis for design for manufacturability implementation.

Relief Cuts and Hole Spacing Prevent Tearing

Proper relief cuts avoid material tear formation at the intersection of the bends, while proper hole spacing ensures no distortion of features. In cases where engineers encounter complicated and irregularly shaped components, taking advantage of professional sheet metal DFM services becomes a way of precisely determining possible failure modes before the drawings are finalized. It forms the basis for holistic sheet metal design optimization, which converts ideas to reality.

How Can Precision Sheet Metal Fabrication Services Reduce Material Waste and Lead Time?

Precision sheet metal fabrication services take advantage of modern technology to significantly reduce waste and fasten lead time. CNC laser cutting in combination with automated bending cells results in tolerance of ±0.05mm.

• Nesting Algorithms Drive Material Utilization to 92%: The nesting algorithms that are optimized in precision sheet metal fabrication ensure an increase in material utilization from a standard 68% to more than 91%. If you opt for fabrication of the parts using stainless steel fabrication services, the material cost is lowered as well as reduced environmental effects.
• Automated Bending Process Avoids Human-Driven Errors: Digital twin simulation technology ensures verification of bending processes prior to any cutting of metal. Monitoring of the process ensures detection of any deviation from the normal operation without any interference in real time and prevents scrap production. Use of this technology saves 40% in lead times than conventional methods.

How Do Aerospace and Automotive Quality Certifications Ensure Zero-Defect OEM Production?

Quality certifications provide the guidelines under which manufacturing excellence can be achieved consistently. Systems such as ISO 9001, ISO 14001, IATF 16949, and AS9100d certified manufacturing use strict documentation, process control, and continuous improvement systems.

Certification Mandates Full Material Traceability

Certification must be made for every material, from inspection to final delivery. Provenance is always documented in every lot, and every process is documented in terms of key parameters. This makes the SME manufacturing best practices possible at a large-scale level.

Quadruple Certification Prevents Batch Defects

For example, LS Manufacturing, an internationally renowned high-precision parts supplier, has obtained full quadruple certifications on their quality management system in compliance with ISO 9001, ISO 14001, IATF 16949, and AS9100D standards. This shows how standardization of quality management helps to prevent batch errors and ensure defect-free OEM production. In accordance with ISO quality management standards, successful quality management in manufacturing supply chains is characterized by documented processes, auditing, and corrective action systems.

Where Should Procurement Managers Source Scalable Custom Sheet Metal Fabrication?

Procurement managers considering custom sheet metal fabrication suppliers should consider their entire supply chain capabilities rather than focusing on simple pricing alone. The key factors of consideration include the flexibility in production capacity, FAIR and Total Cost of Ownership (TCO).

1. FAIR and TCO Analysis Reveal Hidden Costs: Complete FAIR analysis will check the dimensions of the first piece according to the engineering specification provided. In calculating the TCO, tooling cost, logistical cost, quality control cost and possible rework cost need to be considered. These will help make better decisions regarding industrial product design optimisation.
2. Strategic Alliances Ensure Seamless Scaling Up: Companies needing extensive engineering validation and batch manufacturing require forging strategic alliances with experienced custom sheet metal parts factories. This will enable them to scale up from verification of prototypes to mass production. It will provide them with access to precision metal prototyping.

Conclusion

The DFM team at LS Manufacturing assists international medical, automotive, and aerospace industries to manufacture component parts efficiently and effectively. Being ISO 9001, ISO 14001, IATF 16949, and AS9100D certified, the DFM team guarantees defect-free production and scalability. The readers can now download the Precision Component DFM Design Self-Check Guide & Professional Evaluation Service.

FAQs

Q1: What is the primary role of DFM in sheet metal fabrication?

DFM detects possible manufacturing errors at the initial stage of engineering. With the help of change in bend radius, hole spacing, and tolerances, DFM significantly decreases production scrap, minimizes tooling expenses, and increases speed to market. For instance, fixing an undersized relief cut helps avoid frequent scrapping of many parts.

Q2: Why are standard bend radii crucial for reducing metal fabrication costs?

Standard bend radii make it possible to avoid high-cost customized tools and minimize setup time. They provide uniform stress distribution within sheet metal parts and avoid material cracking. Besides, standardization of bend radii helps to simplify inventory management and quotation process.

Q3: How does ISO and AS9100D certification impact sheet metal component quality?

Certifications assure that quality control measures, traceability, and accuracy are assured in all processes. The products conform to very high specifications demanded by the aerospace industry, automotive industry, and medical field. These companies undergo regular audits, and hence procurement officials can rest assured of a constant output.

Q4: What stainless steel grades are best suited for complex OEM parts?

There are austenitic stainless steel grades such as 304 and 316 that have high resistance to corrosion and formability. For high strength requirements, there is a preference for 17-4 PH grade because of its suitability in precision engineering. Proper selection of a suitable grade in relation to the application prevents product failure.

Q5: How can early DFM analysis shorten precision metal prototyping cycles?

DFM analysis identifies the mistakes in design prior to cutting of the materials. Early identification of geometrical problems results in reduction of iterations in physical prototypes by up to 25%. It also helps in reducing engineering changes that would be issued during production ramp-up.

Author Bio

Gloria’s LS Manufacturing team is here to assist global medical, automotive and aerospace customers with solving their manufacturing problems. The team provides zero-defect production and scalability thanks to being ISO 9001, ISO 14001, IATF 16949 and AS9100D certified company. Get a free consultation on DFM now!

Iran says it has reached an agreement with Oman on a route for shipping through the Strait of Hormuz.

Foreign ministry spokesman Esmaeil Baqaei did not give any further details on the agreement, which he said was “in the final stages”.

Baqaei warned however that a deal with Oman would not guarantee safe navigation through the strait on its own, arguing that security remains impacted by the US blockade of Iran’s ports. The US and Oman have not commented on the proposal.

Since the US and Israel attacked Iran in late February, Tehran has largely blocked the Strait of Hormuz through which about a fifth of the world’s oil and liquefied natural gas usually passes. Since then, global oil prices have fluctuated wildly.

On Tuesday, US President Donald Trump warned that Iran would be “hit very hard” if the strait did not open “very soon”.

His comments came after senior US officials said talks had progressed to allow shipments to potentially to resume later this week, though Iran has maintained that it is not negotiating with the US and has no plans to do so.

Reopening of the strait has been a key point in discussions between the two countries and mediators.

In his statement, the Iranian foreign ministry spokesman said the “geographical coordinates of the route” had been agreed with Oman.

“The factors making the Strait of Hormuz insecure still exist on the part of the United States, particularly the naval blockade and other aggressive and threatening actions against Iran and its interests,” he said, according to Iran’s official Irna news agency.

Iran’s Deputy Foreign Minister Kazem Gharibabadi later told Irna that the new route would be temporary and could stay open from two to four months. He did not give further details.

Since the beginning of the war, traffic through the strait has dwindled. Iran has said all passage needs to be cleared beforehand – and it has attacked vessels which have ignored the order.

One of the main points of disagreement between Tehran and Washington has been Iran’s threat to impose a fee on vessels wishing to cross the strait.

On Wednesday, Iranian officials did not say if this issue formed part of the talks with Oman.

In June, Iran and the US signed a Memorandum of Understanding (MoU), aiming to stop fighting, reopen the Strait of Hormuz, and reach agreement to end the war within 60 days.

The deal quickly fell through, as did diplomatic talks, with tit-for-tat attacks resuming just days after the MoU was signed.

The US has maintained a naval blockade of Iranian ports in the region, while another blockade is in place on Saudi Arabia’s ports in the Red Sea, imposed by Yemen’s Iran-backed Houthis since 20 July.

Now look, it may wind up being a huge gift to the GOP come November. But the far-left socialist, antisemitic, anti-American Democrats had a field day yesterday in carrying these Michigan primaries. Of course, the leader is this Dr. Abdul El-Sayed, who won his Senate race by a cat’s whisker, but he won it. He didn’t get any black votes, I don’t think. He didn’t get any brown votes. He didn’t get any working-class votes. Yet he beat a regular Democrat who was backed by Senator Chuck Schumer and Governor Gretchen Whitmer.

So the El-Sayed Democrats, they’re really no different than the Mamdani Democrats or the Bernie Sanders Democrats or the AOC Democrats. It is interesting politically how fast the socialists have taken over in the last couple of years. And the issues are very familiar and very bad for America. 

It’s big government socialism. It’s this Medicare for all, which is really a euphemism, not simply for government control of healthcare, but frankly for government control of the entire economy. Hence the flirtation, not just with socialism, but really with communism. To be sure, it means vast tax increases, the destruction and liquidation of wealth. The destruction of success, the end to individual initiative, the end-to-work incentives, open borders, anti-cops, anti-ICE. 

This crowd, by the way, would raise taxes beyond your wildest dreams. They have no family values. There’s no community, there’s no tradition. Some of them want to abolish the Thanksgiving Day holiday. All they can talk about is transgenderism, and then there’s Palestine. Oh, Palestine. Antisemitism is perhaps the driving animating force behind this entire socialist movement. 

The biggest issue in the Michigan Senate race seems to be the hatred of Israel, which levers off the anti-semitism of Mayor Zohran Mamdani of New York, and it is catching on with all the socialists.

Our friend Ben Domenech now calls the Democrats the party of Commie ISIS. Well put. Now, on the other hand, this is a great Republican opportunity if the GOP can seize it. The problem here is we’re in a booming economy. 

All cylinders, manufacturing, technology, consumers, businesses, a roaring stock market today, another record. Trump Accounts are the most popular thing going, but no one seems to know it according to the best polls. I’m talking about likely voters here, from ace Republican pollster, John McLaughlin, among the best in the business, not registered, not adults, actual likely voters who participated in the last elections. 

For the McLaughin poll he asked, is the economy worse or better? Are you listening? Some 56 percent say worse, 37 percent say better. And then he goes on. Are the Trump tax cuts of last year good enough to improve the economy? Only 26 percent said yes. Boy, that sounds like a messaging problem, but you know what, it’s a policy problem too.

Today, in the paper, an old Reagan hand, my pal, Bruce Thompson — and this was copied by the Committee to Unleash Prosperity Hotline — he notes that Americans pay more in taxes than they spend on food. Clothing and housing, that’s right. As of last year, Americans paid $8.192 trillion in federal, state, and local taxes, and spent $7.388 trillion on food, clothes and housing.

All right, that is not affordability. And I think that’s got people down. They should be up, but they’re not. Yet, the Republican Congress… Has completely bungled the budget. There’s just a couple of days left. No pro-growth tax cuts, no strong communication of the economic successes and the boom, no reform of the spending cuts.

To help solve the affordability issue, people want more money in their pockets. It’s an old Republican theme and for some reason Republicans in Congress and the White House have forgotten it

Today, I just saw the vice president talked about $56 billion of waste fraud. Why isn’t that in the budget? Times 10 years, that would be $560 billion of spending cuts from waste, fraud and corruption. Why isn’t that in the budget? Anyway, if the GOP doesn’t wake up, if the GOP doesn’t start to develop some policies, and if the GOP doesn’t start to develop some significant messaging, then they may bungle not just the midterm election, but they may bungle the whole battle with this Democratic Socialism. And I can’t think of anything worse for America.

For decades, global real estate investors have largely viewed the Middle East and North Africa as separate investment stories.

The Gulf represented capital, stability, and modern infrastructure, while North Africa was often discussed through the lens of tourism or emerging markets.

That distinction may be beginning to blur.

As capital becomes increasingly global and investors search for markets supported by long-term structural fundamentals rather than short-term momentum, Morocco is attracting growing attention. The country’s strategic location, political stability, infrastructure investment, and demographic shifts are beginning to position it as one of the region’s more compelling long-term growth stories.

Rather than competing with the UAE, Morocco may ultimately complement it.

Lukas Kerrebijn, Co-Founder of RD Dubai, believes the two markets occupy different positions within the same broader regional growth narrative.

“We don’t see Morocco competing with the UAE,” he says. “We see it as complementary. They’re both countries that have strong long-term fundamentals and continue attracting people from all over the world.”

For Kerrebijn, the investment thesis extends well beyond property prices.

Leadership remains one of the most overlooked variables in long-term real estate investing. Countries capable of executing ambitious infrastructure projects, maintaining political stability, and fostering investor confidence often create conditions where private capital can compound over decades rather than years.

“Leadership is incredibly important,” he explains. “When a country has strong leadership and a clear long-term vision, it creates confidence for investors. We see that in the UAE, and we believe Morocco shares many of those characteristics.”

Infrastructure forms another pillar of that outlook.

Morocco has spent years investing in transportation networks, tourism infrastructure, and urban development while positioning itself as a gateway between Europe, Africa, and the Middle East. Those investments are expected to accelerate further as the country prepares to co-host the 2030 FIFA World Cup alongside Spain and Portugal.

Major international sporting events rarely create investment opportunities on their own. Instead, they often accelerate infrastructure spending, tourism development, and international visibility that were already underway.

“We want to establish ourselves before the World Cup,” Kerrebijn says. “We believe there will be tremendous growth because of everything that’s happening there.”

Geography also plays a central role.

Few countries occupy such a strategic position. Morocco sits just across the Mediterranean from Europe while maintaining deep economic and cultural ties throughout Africa and the broader Middle East. That accessibility continues to attract tourists, entrepreneurs, and international investors seeking exposure to multiple regions from a single location.

For European buyers in particular, Morocco offers an attractive combination of proximity, climate, and lifestyle.

“It’s very convenient for Europeans,” Kerrebijn notes. “It’s close to Europe, the weather is excellent, and there are significant opportunities developing across the country.”

Demographic trends reinforce the investment case.

Kerrebijn points to an often-overlooked phenomenon: members of the Moroccan diaspora who have spent generations living across Europe are increasingly returning to the country, bringing both capital and entrepreneurial activity.

“There’s a lot happening,” he says. “People whose families have lived in Europe for generations are starting to move back to Morocco, and that creates additional opportunities.”

Such population movements often become powerful drivers of long-term housing demand, business formation, and local investment.

Viewed together, these trends suggest Morocco’s story extends beyond tourism or short-term development cycles. Instead, it reflects the convergence of several structural forces: infrastructure investment, international connectivity, demographic change, stable governance, and increasing global attention.

For investors accustomed to looking only at established markets, those characteristics may appear familiar.

Indeed, many of the same long-term fundamentals that helped transform the UAE into a global investment destination are increasingly visible elsewhere in the region.

That does not imply Morocco will replicate Dubai’s trajectory, nor should it. Every market develops according to its own economic, political, and demographic realities.

But as institutional and private capital become increasingly selective, investors are placing greater emphasis on structural resilience than speculative momentum.

By that measure, Morocco’s investment story may be only beginning.

For firms like RD Dubai, the country’s appeal lies not in chasing the next headline, but in identifying markets whose strongest years may still lie ahead.

Payment integration often begins as an IT project: choose a provider, connect the API, complete the checks, and go live.

The way a business builds its payment infrastructure is now a commercial decision. A poor setup causes more declines and drives up support costs. Revenue suffers long before the technical team calls the integration a failure.

The European payment market is changing faster than most businesses can adapt. PSD3 will change how providers handle authentication, fraud data, and customer protection. The EU Instant Payments Regulation is requiring payment providers to offer instant euro transfers.

What works in Germany may reduce conversions in France. A checkout optimised for Spain can underperform in the Netherlands. Even neighbouring markets often rely on completely different payment habits.

The pressure is greater for High-Risk businesses in sectors such as iGaming and Forex. Banks apply different risk policies, approval rates fluctuate between providers, and a single integration decision can affect approval rates for months after launch.

Many of the costs companies associate with payment processing in Europe are not caused by fees alone. They come from failed transactions, payment declines, abandoned checkouts, manual operations, delayed settlements, and rebuilding integrations that were never designed to scale.

Why payment integration in Europe is more complex

Europe is often treated as a single payments market. The Single Euro Payments Area (SEPA) and the Instant Payments Regulation have created common standards for many financial institutions. The move from PSD2 towards PSD3 will affect authentication, fraud controls and provider responsibilities. Merchants should review whether their current setup is ready.

Customers across the continent pay differently and expect different checkout experiences. In the Netherlands, iDEAL remains dominant for online purchases. German consumers still favour direct bank transfers and invoice payments. Southern European markets show stronger card usage, while open banking payments are gaining ground momentum across both the EU and the UK.

Payment integration in Europe needs to reflect local customer behaviour without forcing the operations team to manage a separate integration and dashboard for every market.

PSD3 introduces stricter rules around authentication and fraud prevention. The EU Instant Payments Regulation requires payment service providers to offer real-time euro transfers under the same pricing conditions as standard SEPA transfers. Faster settlement gives customers and merchants quicker access to funds, but it also leaves less time to catch processing errors.

High-Risk merchants face additional pressure because payment providers apply different risk criteria depending on industry, transaction volume, and geography. A payment route that performs well for an e-commerce retailer may generate lower approval rates for a Forex platform or an iGaming operator. Merchants expanding into multiple European countries often discover that approval rates differ significantly between providers.

Baymard Institute research shows that checkout friction remains a significant cause of cart abandonment. Worldpay’s latest Global Payments Report also shows that digital wallets, account-to-account payments, and alternative payment methods continue to gain market share across Europe, reducing reliance on traditional card payments.

For a growing business, payment processing in Europe is part of the customer experience. It needs the same level of localisation as pricing and language.

Understanding the European payments ecosystem

European payments are shaped by regulation and local customer behaviour. Success depends on understanding how these layers interact rather than treating them as separate challenges.

A checkout can pass every PSD2 requirement and still underperform in the Netherlands if it does not offer iDEAL. Equally, adding every available payment option without considering fraud controls or routing logic often increases operational costs instead of improving performance.

Five payment trends matter most for merchants entering Europe.

Trend	Business impact
Instant payments	Faster settlement and better cash flow, alongside rising expectations for real-time transfers
Open banking	Lower processing costs, higher trust in account-to-account (A2A) payments, and reduced dependence on cards
Payment localisation	Higher conversion rates through local payment methods and familiar checkout experiences
Stronger regulation	More investment required in compliance, fraud monitoring, and authentication
Payment orchestration	Better approval rates through smart routing and multiple provider management

[иллюстрация: оформить таблицу в фирменном стиле]

Many businesses still struggle to offer enough local payment methods when entering new European markets. Others experience declining approval rates because transactions are routed through a single provider regardless of geography or issuer behaviour. Fraud losses remain a concern. New compliance requirements are adding more work for payment and risk teams.

SEPA simplifies euro transfers across participating countries. Different currencies remain in use, while domestic banking systems operate alongside SEPA.

The UK follows its own regulatory system under the Financial Conduct Authority (FCA), while faster payments and open banking have evolved independently from the EU’s payment stack.

Companies that treat payment integration as an ongoing optimisation process generally achieve higher payment conversion rates than those relying on a one-time implementation.

Five costly mistakes

Most payment integration problems develop gradually as businesses grow. The same five mistakes recur among businesses entering European markets. While they are especially common among High-Risk merchants, they affect virtually any company managing cross-border payments across Europe.

Mistake 1: Ignoring local payment preferences

Payment behaviour varies widely between countries. Many customers actively look for familiar local payment methods before deciding whether to complete a purchase.

Dutch customers overwhelmingly expect iDEAL. German users often prefer direct bank transfers or invoice-based payments. Mobile payments are widely used across Scandinavia. Open banking payments grow across both the UK and continental Europe.

Customers hesitate when they cannot immediately recognise a trusted payment method. Some leave without paying. Others switch to competitors that offer payment experiences better aligned with local expectations.

The problem is sharper on mobile.

Younger users increasingly expect biometric authentication, QR payments, or digital wallets instead of manually entering card details. Every additional field, redirect or authentication step increases the probability of abandonment.

Currencies, language, checkout design, payment options — everything can affect conversion. Showing the most relevant payment methods first can improve payment conversion without changing the underlying payment setup.

Payment localisation belongs in the launch plan. Adding it after conversion falls is usually more expensive.

Mistake 2: Skipping compliance checks

Compliance gaps often remain hidden until volumes rise. Then providers request updated documents, banks increase monitoring, and some payment flows begin to see more declines.

A compliance review can freeze settlement or delay a market launch.

Payment teams now have to prepare for:

• the transition from PSD2 to PSD3
• stronger AML requirements
• enhanced Strong Customer Authentication (SCA) rules
• stricter fraud-monitoring requirements

Payment providers are also becoming more selective when onboarding merchants operating in High-Risk industries.

Some businesses rely on payment providers that are not fully aligned with future regulatory changes. Others postpone fraud monitoring until chargebacks begin to increase. Documentation is treated as a one-off onboarding exercise instead of an ongoing operational process.

For companies handling payment processing in Europe, compliance should be part of the operating model. Working with providers that actively monitor regulatory developments and update their authentication, monitoring and reporting processes as the rules change reduces the risk of disruption later.

Mistake 3: Hardcoding provider integrations

Some businesses start with one PSP and later add separate providers for individual methods or markets.

Businesses relying on a single payment provider have limited ability to redirect traffic during technical disruptions. Each additional provider brings another API connection and reconciliation process. Over time, payment teams spend more resources managing integrations than raising approval rates and reducing failed payments.

Without dynamic payment routing, every transaction follows the same path regardless of issuer behaviour or approval history. If one provider experiences lower authorisation rates in a particular country, every declined transaction directly affects revenue. If the route underperforms, every transaction sent through it carries the same disadvantage.

Payment orchestration addresses this challenge by separating business logic from individual payment providers.

A payment architecture that connects several providers through one integration is significantly easier to scale than one built around a single integration. SPAYZ.io gives High-Risk merchants access to 55+ payment solutions through a single API integration. Availability depends on the market and the required payin/payout flow.

Mistake 4: Poor testing and error handling

A poorly tested integration may look fine on launch day.

Many merchants validate only successful transactions while overlooking the scenarios that happen every day in production:

• interrupted customer sessions;
• failed 3D Secure authentication;
• declined issuer responses;
• expired payment links;
• duplicate submissions;
• network latency;
• provider downtime;
• webhook delivery failures.

These scenarios directly affect payment approval rates and customer trust.

Imagine a customer authorises a payment through their banking app but returns to an error page because the callback was delayed by a few seconds. From the customer’s perspective, they’ve paid. From the merchant’s perspective, the payment may remain in an unknown state until someone manually investigates it.

The same applies to mobile checkout.

European consumers increasingly complete transactions on smartphones, particularly when using digital wallets or open banking payments. Redirect flows that work perfectly on desktop can introduce unnecessary friction on mobile devices. Long loading times, poorly optimised authentication pages, and unclear error messages all contribute to lower checkout optimisation metrics.

A practical approach includes:

• automated sandbox testing before every release;
• monitoring webhook delivery and retry logic;
• detailed payment logs for every transaction;
• real-time alerts when approval rates fall unexpectedly;
• clear customer-facing error messages that explain what happened and suggest the next step.

Testing should begin before launch and continue throughout the life of the integration.

Mistake 5: Overlooking fraud and security gaps

As payment technology changes, fraud tactics change with it. Criminals no longer rely solely on stolen card details. Account takeover attacks, synthetic identities, authorised push payment fraud, phishing campaigns, and increasingly sophisticated social engineering schemes are becoming more common across digital payments.

The challenge across European markets is balancing security with customer experience. Adding excessive verification to every transaction creates unnecessary friction and lowers conversion.

Higher-risk transactions should face stricter checks; routine payments should not carry the same friction.

Fraud prevention combines behavioural analysis with device fingerprinting and transaction monitoring to identify unusual activity without interrupting legitimate customers.

Alongside PCI DSS requirements for handling payment data, European businesses must comply with stronger cybersecurity expectations under rules such as NIS2, particularly if they provide essential digital services or operate critical infrastructure.

Strong payment fraud prevention affects approvals, chargebacks, and customer trust, so they can’t be left to the IT team alone.

UK vs EU: key payment differences

Following Brexit, the UK retained much of PSD2 but now develops payment regulation independently under the Financial Conduct Authority (FCA) and the Payment Systems Regulator (PSR). The EU, meanwhile, is moving towards PSD3 and implementing the Instant Payments Regulation.

For merchants, these differences have practical consequences.

EU Payments	UK Payments
PSD2 moving towards PSD3	FCA-led regulatory framework
SEPA credit transfer & SEPA Instant	Faster payments infrastructure
Instant euro transfers across participating countries	Near real-time GBP payments through faster payments
Growing adoption of open banking across member states	A more mature open banking market within one platform
Multiple currencies outside the Eurozone	Primarily GBP-focused domestic integration model

[иллюстрация: оформить таблицу в фирменном стиле]

Choosing the right UK payment providers, supporting payment processing in the UK alongside payment processing in Europe, and adapting checkout experiences to local expectations generally improves approval rates and checkout conversion.

Hidden costs businesses often overlook

When businesses compare payment providers, they usually focus on transaction fees. Those fees matter, but they are rarely the largest expense.

Hidden cost	Business impact
Payment declines	Lost revenue and lower customer lifetime value
Checkout abandonment	Reduced conversion despite stable website traffic
Manual reconciliation	Higher operational costs for finance teams
Provider downtime	Lost transactions during peak demand
Single-provider dependency	Limited negotiating power and slower expansion
Chargebacks and fraud investigations	Increased manual work and compliance costs
Slow onboarding for new markets	Delayed revenue generation in new GEOs

[иллюстрация: оформить таблицу в фирменном стиле]

Increasing the payment approval rate by only a few percentage points can generate substantial additional revenue for businesses processing thousands of transactions each day. Reducing payment failures reduces support requests and gives customers fewer reasons to abandon the platform.

Many payment teams eventually realise that payments should be managed like any other revenue-generating function. That means continuously monitoring performance, measuring provider efficiency by market, analysing decline reasons, and refining routing strategies over time.

How payment orchestration helps

Many of these problems emerge because payment infrastructure becomes increasingly difficult to manage as businesses grow.

Adding more providers introduces additional APIs. Expanding into new countries requires new payment methods. Fraud controls become more complex. Each change may require another API connection or manual process.

Payment orchestration reduces the number of integrations a merchant has to manage.

Transactions can be directed dynamically according to: customer location payment method historical approval rates issuer performance provider availability transaction value fraud risk

[иллюстрация: оформить как “цитату”]

If one provider experiences technical issues, traffic can automatically move to another route. If approval rates decline in a specific country, routing rules can be adjusted without rebuilding the entire payment architecture.

Payment provider checklist

Before committing to a new payment partner or reviewing your existing payment setup, use the checklist below.

Question	Why it matters
Does the provider offer your target markets?	Make sure the provider operates in the countries where you plan to expand.
Are local payment methods available?	Check whether it supports bank transfers, eWallets, or other local schemes customers use in each market.
Is the platform ready for PSD3 and future regulatory changes?	Ask how the provider updates authentication, reporting, and fraud controls when regulations change.
Can transactions be routed dynamically?	Ask whether routing can change by country, issuer or method.
Does the provider offer transparent reporting?	Ask for detailed analytics to identify payment failures, monitor conversion, and optimise performance.
How does the provider handle fraud prevention?	Look for PCI DSS compliance, risk scoring, 3DS, behavioural monitoring, and adaptive fraud controls.
Is the infrastructure flexible?	Check whether new methods and markets can be added without rebuilding the existing integration.
Can the provider work with High-Risk industries?	Businesses in iGaming, Forex, and other emerging markets require payment partners familiar with higher-risk transaction flows.

[иллюстрация: оформить таблицу в фирменном стиле либо сделать как карточки “вопрос/ответ”]

Many growing businesses now build their payment infrastructure around orchestration platforms, allowing them to manage several providers and change routing rules without redesigning the checkout.

Conclusion

Payment decisions belong in commercial planning because they determine how much acquired traffic turns into revenue.

Businesses that consistently improve payment localisation, monitor payment approval rates, build more resilient payment processing in Europe, and build a flexible payment architecture are usually better positioned to grow across both established and emerging markets.

The right setup should make the next market easier to launch, not add another integration the team has to maintain. Reviewing the payment setup before volumes rise is cheaper than rebuilding it after declines, support costs and provider dependencies are embedded in the business.

Bayer’s BAYN 2.01%increase; up pointing triangle Chief Executive Bill Anderson ruled out a breakup of the group’s operations for now, saying the company still has work to do before it can consider options.

The German conglomerate is focused on containing litigation uncertainty, reducing debt and internal bureaucracy, strengthening the drug pipeline of its pharma business, and improving the profitability of its agriculture unit. Anderson said Bayer wouldn’t allow discussions on potential sales or spinoffs of its divisions to become a distraction.

Copyright ©2026 Dow Jones & Company, Inc. All Rights Reserved. 87990cbe856818d5eddac44c7b1cdeb8