Connect with us
DAPA Banner

Tech

Revel Performa4 Speaker Series Debut at AXPONA 2026 Priced From $2,000-$7,000

Published

on

Revel is heading into AXPONA 2026 (April 10-12) with a clear focus: the debut of its new Performa4 speaker series, expected to fall between $2,000 and $7,000 per pair. Under the HARMAN Luxury Audio Group umbrella, which also includes Arcam, JBL Synthesis, Lexicon, and Mark Levinson, Revel isn’t going after statement pricing here. Performa4 is aimed at the part of the market where most serious systems are actually built, and where the competition is crowded, well established, and not particularly forgiving.

Revel Performa4 Speaker Series

Revel’s Performa4 Series is a new loudspeaker line built on the company’s established approach to acoustic design and measurement. It reflects three decades of engineering focused on controlled performance and consistent results in real-world listening environments.

Revel’s Performa4 Series consists of two floorstanding models (F346 and F345), two bookshelf speakers (M146 and M145), a center channel (C245), and a powered subwoofer (B140). With multiple configurations available, the Performa4 lineup can be used in both two-channel music systems and multichannel home theater setups.

At Revel, science is at the heart of everything we do. The Performa4 series represents the culmination of thousands of hours of research, development, and real-world testing. With our new 7th-generation Acoustic Lens waveguide and advanced DCC and MCC transducers, we’ve raised the bar for what’s possible in this class,” said Jim Garrett, Senior Director of Product Strategy and Planning at HARMAN Luxury Audio.

Advertisement

Acoustic Lens Waveguide, DCC and MCC Transducers Explained

The Performa4 series uses Revel’s Deep Ceramic Composite (DCC) and Micro Ceramic Composite (MCC) drivers, developed to improve stiffness while keeping mass low and reducing unwanted coloration.

Woofer and midrange drivers are built on cast aluminum frames designed with Finite Element Analysis to optimize airflow, control resonance, and maintain structural stability. Each driver also uses an inverted surround and integrated trim ring, which simplifies the front baffle and keeps the layout clean.

Revel’s 7th-generation Acoustic Lens waveguide is paired with a 1-inch DCC dome tweeter to improve integration with the midrange driver. The waveguide is designed to control dispersion more consistently across the listening area, while also supporting higher efficiency and lower distortion, including at off-axis positions.

Revel Performa4 Industrial Design

The Performa4 series adopts a clean, modern design that builds on Revel’s established cabinet approach without adding unnecessary complexity.

Advertisement

All models use magnetically attached grilles for a flush, hardware-free front panel, along with black accent detailing that keeps the visual profile consistent across the range. Cabinets are internally cross-braced to improve rigidity and reduce unwanted vibration.

Curved side panels are finished in real wood veneers, available in Natural Walnut and Black Walnut, offering a straightforward aesthetic that fits into both traditional and contemporary spaces.

Revel Performa4 Models


F346 

f346

The F346 is a 3-way floorstanding loudspeaker and the top model in the Performa4 series.

Advertisement. Scroll to continue reading.

It uses three 6.5-inch (165mm) MCC woofers, a 6.5-inch (165mm) DCC midrange driver, and a 1-inch (25mm) DCC dome tweeter paired with Revel’s 7th-generation Acoustic Lens waveguide.

Advertisement

Dual rear-firing ports provide low-frequency extension, while dual 5-way binding posts support bi-amping or bi-wiring. The cabinet is fitted with solid aluminum feet and includes optional floor spikes for added stability.

The F346 is rated for a frequency response of 30Hz to 40kHz (±6dB), with 88dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 20 to 250 watts.

F345

f345

The F345 is a 3-way floorstanding loudspeaker that shares the same core design as the F346, using smaller drivers in a more compact cabinet.

It features three 5.25-inch (130mm) MCC woofers, a 5.25-inch (130mm) DCC midrange driver, and a 1-inch (25mm) DCC dome tweeter paired with Revel’s 7th-generation Acoustic Lens waveguide.

Dual rear-firing ports support low-frequency output, while dual 5-way binding posts allow for bi-amping or bi-wiring. The cabinet includes solid aluminum feet with optional spikes for placement flexibility.

Advertisement

The F345 is rated for a frequency response of 36Hz to 40kHz (±6dB), with 87dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 30 to 225 watts.

M146

m146

The M146 is a 2-way bookshelf or standmount speaker positioned in the middle of the Performa4 lineup.

It uses a 6.5-inch (165mm) MCC woofer paired with a 1-inch (25mm) DCC dome tweeter and Revel’s 7th-generation Acoustic Lens waveguide.

The crossover network incorporates air-core inductors, and dual 5-way binding posts support bi-amping or bi-wiring. Optional MFS4 floor stands are available for proper placement and listening height.

The M146 is rated for a frequency response of 43Hz to 40kHz (±6dB), with 86dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 15 to 200 watts.

Advertisement

M145 

m145

The M145 is a compact 2-way bookshelf speaker and the smaller option in the Performa4 lineup.

Advertisement. Scroll to continue reading.

It features a 5.25-inch (130mm) MCC woofer paired with a 1-inch (25mm) DCC dome tweeter and Revel’s 7th-generation Acoustic Lens waveguide.

Like the M146, it includes 5-way binding posts for flexible connectivity and is compatible with the optional MFS4 floor stands for proper positioning.

The M145 is rated for a frequency response of 54Hz to 40kHz (±6dB), with 85dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 15 to 150 watts.

Advertisement

C245

c245

The C245 is a dedicated center channel speaker designed for use in multichannel systems with other Performa4 models.

It features dual 5.25-inch (130mm) MCC woofers flanking a 1-inch (25mm) DCC dome tweeter, paired with Revel’s 7th-generation Acoustic Lens waveguide for consistent dispersion across the front soundstage.

The C245 is rated for a frequency response of 55Hz to 40kHz (±6dB), with 86dB sensitivity and a nominal impedance of 6 ohms. Recommended amplifier power ranges from 15 to 200 watts.

B140 

b140

The B140 is a powered subwoofer designed to integrate with the Performa4 series in both two-channel and home theater systems.

It uses a 10-inch (250mm) fiber-composite woofer driven by a 750-watt RMS Class D amplifier, with up to 1,500 watts peak output. The design targets low-frequency extension down to 26Hz.

Rear-panel controls include a variable low-pass filter (50–150Hz), LFE input, phase adjustment, volume control, and auto on/off functionality. A rear-ported enclosure using Revel’s Constant Pressure Gradient design is intended to reduce turbulence and maintain cleaner low-frequency output.

Advertisement

MFS4 Floorstands 

mfs4-stands

Revel also offers the optional MFS4 floor stands for the M146 and M145 bookshelf speakers.

Constructed from extruded aluminum and steel, the MFS4 stands are designed to position each speaker at an appropriate listening height. They include built-in cable management and optional spikes for use on carpeted surfaces. The stands are sold in pairs.

Revel Performa 4 Comparisons

Revel Model  F346 F345 M146 M145  C245
Speaker Type Floorstanding Floorstanding Bookshelf Bookshelf Center
Price $6,999/pair $4,999/pair $2,999/pair $1,999/pair $1,499/each
Speaker Configuration  3-way 3-way 2-way 2-way 2-way
Tweeter 1-inch (25mm) DCC Dome Tweeter with Acoustic Lens and 7th-Generation Waveguide 1-inch (25mm) DCC Dome Tweeter with Acoustic Lens and Waveguide  1-inch (25mm) DCC Dome Tweeter with Acoustic Lens and Waveguide 1-inch (25mm) DCC Dome Tweeter with Acoustic Lens and Waveguide  1-inch (25mm) DCC Dome Tweeter with Acoustic Lens and Waveguide 
Midrange 1 x 6.5 in (165 mm) Deep Ceramic Composite (DCC) Cone Driver 1 x 5.25 in (135 mm) Deep Ceramic Composite (DCC) Cone Driver  N/A N/A N/A
Woofer 3 x 6.5 in (165 mm) Micro Ceramic Composite (MCC) Cone Woofers 3 x 5.25 in (135 mm) Micro Ceramic Composite (MCC) Cone Woofers 1 x 6.5-inch (165 mm) Micro Ceramic Composite (MCC) Cone Woofer 1 x 5.25 inch (130 mm) Micro Ceramic Composite (MCC) Cone Woofer 2 x 5.25-inch (135 mm) Micro Ceramic Composite (MCC) Cone Woofers
Enclosure Tuning  Bass-Reflex via Dual Rear-Mounted Ports Bass-Reflex via Dual Rear-Mounted Ports Bass-Reflex via Rear-Mounted Port Bass-Reflex via Rear-Mounted Port Bass-Reflex via Rear-Mounted Port
Nominal Impedance 6 Ohms 6 Ohms 6 Ohms 6 Ohms 6 Ohms
Sensitivity @ 1m, 2.83V 88 dB 87 dB 85.5 dB 85 dB 86 dB
Recommended Amplifier Power 20-250W 30-225W 15-200W 15-150W 15-200W
Frequency Response +/-6 dB 30 Hz – 40 kHz 36 Hz – 40 kHz 43 Hz – 40 kHz 54 Hz – 40 kHz 55 Hz – 40 kHz
Crossover Frequency 275 Hz / 1.7 kHz 350 Hz / 2.1 kHz 1.7 kHz 1.8 kHz 1.8 kHz
Dimensions 44.4 x 14.1 x 16.3 inches

1127 x 357.33 x 414.48 mm

40.9 x 11.9 x 13.9 inches
Advertisement

1038 x 301.86 x 352.46 mm

14.1 x 9.7 x 12.7 inches

359 x 245.56 x 322.57mm

11.6 x 7.9 x 9.6 inches
Advertisement

294 x 200 x 245mm

7.1 x 23.4 x 10.9 inches

181 x 594.5 x 277 mm

Product Weight 87.5 lbs / 39.7 kg 64 lbs / 29.1 kg 24.3 lbs / 11 kg 15 lbs / 6.8 kg 27.1 lbs / 12.3 kg

Revel B140 Subwoofer

Revel Model B140
Product Type  Powered Subwoofer
Price $2,999/each
Driver 250mm (10-inch) Coated Fibre Composite Cone Driver in a cast-Aluminum frame
Amplifier Type Class D amplifier
Power Output 750W RMS (1500W peak) 
Enclosure Tuning Bass-Reflex via Rear-Mounted Port
Controls  Auto Power, Crossover, Level, Phase
Inputs RCA LFE/Line Level, 3.5mm, 12V Trigger
Frequency Response +/-6 dB 26Hz – 150Hz
Crossover Frequency (Variable) 50Hz – 150Hz
Dimensions 14.8 x 16.9  x 17.2 inches
(376.2 x 429.28 x 436.37 mm)
Weight 61.3 lbs / 27.8 kg

The Bottom Line 

Revel’s Performa4 series is a calculated move into one of the most competitive segments in loudspeakers. The combination of DCC and MCC driver materials, the 7th-generation Acoustic Lens waveguide, and consistent cabinet engineering across the range points to a focus on controlled dispersion, tonal consistency, and predictable in-room performance; areas where Revel has historically been very disciplined.

Advertisement
Advertisement. Scroll to continue reading.

The lineup is clearly built for flexibility. It can anchor a straightforward two-channel system or scale into a full home theater without mixing and matching across different voicings. That matters for buyers who want system coherence without overthinking every component swap.

What’s less clear is how much separation there is between models beyond size and output, and whether the subwoofer’s pricing will make sense for buyers building out a full system. There’s also no indication of built-in room correction or system-level integration features, which are becoming more common even in passive speaker ecosystems when paired with modern electronics.

This is for listeners who want a complete, measurement-driven speaker system in the $2,000 to $7,000 range without stepping into five-figure territory. Not entry-level, not cost-no-object—right in the middle where most serious systems live.

Advertisement

At AXPONA 2026, the F346 will be demonstrated with an Arcam SA45 integrated streaming amplifier and CD5 CD player, which should give a clear sense of how the top model performs with both streaming and physical sources.

Pricing & Availability

The Revel Performa4 series begins shipping in April through authorized Revel dealers and custom installation installers. All models are available in Natural Walnut and Black Walnut wood veneer finishes.

Suggested retail pricing is as follows:

  • F346 Triple 6.5-inch Floorstanding Speaker – $6,999/pair
  • F345 Triple 5.25-inch Floorstanding Speaker – $4,999/pair
  • M146 6.5-inch Bookshelf Speaker – $2,999/pair
  • M145 5.25” Bookshelf Speaker – $1,999/pair
  • C245 Dual 5.25” Center Channel Speaker – $1,499/each
  • B140 10-inch Powered Subwoofer – $2,999/each
  • MFS4 Floor Stands – $699/pair 

The Revel Performa4 series will make its official debut at AXPONA 2026, April 10-12, at the Schaumburg Convention Center in Chicago, IL.

For more information, visit www.revelspeakers.com

Advertisement

Source link

Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

How NinjaOne became a $5B challenger in unified IT operations

Published

on

Sal Sferlazza has a habit of building companies that get acquired. Before NinjaOne, the serial founder sold four startups in succession: a gaming studio to NCSoft, a data-protection firm to SonicWall, a network management company to Quest Software, and a file-sync service to eFolder. Each one solved a narrow IT problem. Each one got swallowed by a larger platform. By the time Sferlazza and his long-time co-founder Chris Matarese started NinjaRMM in 2013 (later rebranded to NinjaOne), the pair had learned something about the IT tools market: point solutions are a trap, for buyers and sellers alike.

That insight now underpins a company valued at $5 billion, with more than $500 million in annual recurring revenue, 35,000 customers, and a growth rate that makes most enterprise software vendors look glacial. In the first three months of 2026 alone, NinjaOne landed in the Leader quadrant of Gartner’s Magic Quadrant for Endpoint Management Tools (on its first appearance), signed a multi-year partnership with Audi’s debut Formula 1 team, launched two entirely new product lines, and reported that healthcare organisations are adopting its platform at a pace that nearly doubled its sector-specific revenue. For a company that spent its first several years in relative obscurity, the acceleration is striking. In a year that has already produced a fresh wave of European unicorns across cybersecurity, defence tech, and cloud optimisation, NinjaOne’s $5 billion valuation no longer looks like an outlier. It looks like part of a pattern.

The consolidation thesis

To understand NinjaOne’s trajectory, you first have to understand the mess it is cleaning up. The average mid-market IT department in 2026 runs somewhere between six and 12 separate tools to manage endpoints, deploy patches, track assets, back up data, provide remote support, and monitor network health. Each tool has its own console, its own alert logic, its own pricing model, and its own idea of what an “endpoint” is. The result is what the industry euphemistically calls “tool sprawl,” and what IT administrators more accurately describe as a daily exercise in context-switching and alert fatigue.

This fragmentation is not an accident. For two decades, the dominant philosophy in IT management was “best of breed”: pick the sharpest tool for each job, and stitch them together with integrations, scripts, and middleware. It worked tolerably well when a typical corporate fleet consisted of desktop PCs on a single network. It works considerably less well when that fleet includes laptops, tablets, phones, IoT sensors, cloud workloads, and medical devices scattered across dozens of locations, half of which have staff who never come into an office.

Advertisement

The shift in CIO spending patterns has been building since 2023, but 2026 is the year it turned into concrete purchasing decisions. Research from Futurum Group found that early executive intent to consolidate platforms has now translated into budget line items. Paessler, the network monitoring firm, published analysis calling 2026 “the year of monitoring consolidation.” And the vendors themselves are responding: Fortinet expanded into unified security operations, ServiceNow pushed deeper into cross-functional IT orchestration, and a generation of smaller players began marketing themselves as platforms rather than products. As TNW’s 2025 tech recap noted, the AI infrastructure build-out is forcing CIOs to rethink not just their security posture but the entire operational stack underneath it.

Advertisement

A platform built from scratch, not stitched together

NinjaOne’s pitch is that it was designed as a unified platform from the ground up, not assembled through a series of acquisitions bolted onto a legacy codebase. The distinction matters. Kaseya, which holds roughly 25.9 per cent of the remote monitoring and management market, has grown largely through acquisition: it bought Datto for $6.2 billion in 2022, absorbed Unitrends, IT Glue, and a string of other products, each with its own architecture. ConnectWise, at 25.4 per cent, has followed a similar playbook. The result, according to IT administrators who use these platforms daily, is inconsistent interfaces, duplicated functionality, and the persistent feeling that different parts of the product were built by different companies. Because they were.

NinjaOne took the slower route. Rather than acquiring its way to feature parity, the company built each capability natively on a single cloud-native, multi-tenant architecture. Endpoint management, patch management, remote access, backup, mobile device management, and (as of early 2026) IT asset management and vulnerability management all run on the same platform, share the same data model, and appear in the same console. The trade-off was time: NinjaOne spent years as a narrower product while its competitors could tick more boxes on procurement checklists. The payoff is that when an IT administrator deploys a patch through NinjaOne, the platform already knows which devices are affected, what their current vulnerability status is, whether they are under warranty, and what their backup state looks like. No integration required.

That architectural bet is now paying off in measurable ways. NinjaOne’s customer base grew more than 60 per cent over the past year. It holds a 96 per cent “willingness to recommend” score in Gartner’s Peer Insights Voice of the Customer report, the highest among all vendors evaluated. And when Gartner placed NinjaOne in the Leader quadrant of its 2026 Magic Quadrant for Endpoint Management Tools, it did so on the company’s first-ever inclusion. Appearing in a Gartner Magic Quadrant for the first time and landing directly in the Leader position is uncommon enough that it tends to get noticed by the procurement teams who treat these reports as shortlists. In the cybersecurity space, Belgian startup Aikido recently reached unicorn status on a similar trajectory of rapid analyst recognition and customer adoption. The pattern suggests that buyers are increasingly willing to back newer vendors if the product-market fit is demonstrably strong.

From server rooms to operating theatres

One of the more revealing signals in NinjaOne’s recent trajectory is where its growth is coming from. In March 2026, the company reported that nearly 1,000 healthcare organisations had adopted the platform over the previous year, driving roughly 70 per cent year-over-year growth in healthcare-specific recurring revenue. This is not a sector that switches IT platforms casually.

Advertisement

Healthcare IT teams operate under constraints that most industries do not face. Regulatory mandates (HIPAA in the US, NIS2 in Europe) impose strict requirements on device management and data protection. Downtime tolerance is effectively zero: if a diagnostic workstation goes offline during a procedure, the consequences are clinical, not merely inconvenient. Staff are distributed across hospitals, clinics, and remote care facilities. And the device fleet is unusually heterogeneous, mixing standard laptops with specialised medical equipment, legacy systems that cannot be easily updated, and an expanding layer of connected devices.

The appeal of a unified platform in this context is not abstract. A healthcare IT team using NinjaOne can patch a workstation, verify its vulnerability status, confirm its backup is current, and remotely troubleshoot it from a single console, without switching between tools, correlating data manually, or waiting for a scheduled scan to complete. The company’s new vulnerability management capability, launched in March 2026, detects vulnerabilities in real time using existing device telemetry rather than periodic endpoint scans. For a hospital running thousands of devices across dozens of locations, the difference between continuous detection and weekly scanning is not a technical nicety. It is the difference between knowing about a critical vulnerability on Monday morning and discovering it the following Friday.

The AI layer: from reactive patching to autonomous operations

The two product launches NinjaOne announced in early 2026 share a common thread: they both lean heavily on artificial intelligence, but in ways that are more operational than aspirational. The IT asset management module, released in February, uses real-time data syncing to maintain a continuously updated inventory of hardware, software, warranties, and licences across an organisation’s entire estate. The practical benefit is that IT teams no longer need to run periodic audits or maintain parallel spreadsheets to know what they own, what condition it is in, and what is about to expire. The system knows, because it is drawing from the same telemetry that powers endpoint management.

The vulnerability management module, which followed in March, is more ambitious. Traditional vulnerability scanning works on a schedule: a tool scans endpoints at set intervals, generates a report, and hands it to a security team that then needs to figure out which findings are critical, which devices are affected, and how to remediate them. The gap between discovery and remediation is measured in days or weeks. NinjaOne’s approach skips the scanning step entirely. Because the platform already has continuous telemetry from every managed endpoint, it can assess vulnerability exposure in real time, server-side, without any additional agent load on the device. The company tested this in beta across more than 500,000 endpoints before the general release.

Advertisement

What makes this more than a feature announcement is how it connects to NinjaOne’s existing autonomous patching engine. When the vulnerability module identifies an exposure, it can trigger the patching system to prioritise and deploy the relevant fix automatically, using AI to assess patch confidence, test for conflicts, and determine deployment timing. The result is a closed loop: detect, prioritise, remediate, verify. For IT teams that currently manage this workflow across three or four separate tools and a ticketing queue, collapsing it into a single automated pipeline represents a meaningful reduction in both risk exposure and manual work.

The F1 play and the brand gap

If NinjaOne has a weakness relative to its larger competitors, it is brand recognition outside the IT administration community. Kaseya sponsors large industry events and has an outsized marketing presence. ConnectWise runs its own annual conference. NinjaOne, until recently, was the tool that IT professionals recommended to each other in forums and subreddits, but that CFOs and CIOs had rarely heard of.

The Audi Revolut F1 partnership, announced in January 2026, is a deliberate attempt to change that. NinjaOne is the official endpoint management, mobile device management, and SaaS backup partner for Audi’s debut Formula 1 team, which enters the FIA World Championship in March 2026. The company’s platform will manage endpoints and systems across factory and trackside operations globally, a use case that demands the same real-time visibility and zero-downtime resilience that NinjaOne pitches to its enterprise customers.

There is a pragmatic logic to the deal beyond brand exposure. Formula 1 is one of the most data-intensive environments in sport, with each car generating hundreds of gigabytes of telemetry per race weekend. The IT infrastructure supporting a team operates under extreme time pressure, across multiple continents, with no margin for the kind of tool fragmentation that causes delays. As a proof-of-concept for unified IT operations in a high-stakes environment, it is hard to invent a better one. It also fits a broader trend of AI-driven operational efficiency reshaping how organisations think about the ratio between human oversight and automated execution.

Advertisement

What comes next

NinjaOne’s CEO told CNBC that the company expects to sustain 60 to 70 per cent revenue growth through 2026 and plans to launch five to six additional products over the next year. The cadence is notable. Most enterprise software companies at NinjaOne’s scale slow their release velocity as they grow, layering on process and caution. NinjaOne shipped two major products (ITAM and vulnerability management) in the space of five weeks. Whether that pace is sustainable as the engineering team scales is an open question, but the company’s cloud-native architecture, which was designed for rapid iteration across a shared codebase, at least makes the mechanics easier than it would be for a vendor managing a portfolio of acquired products on different technology stacks.

The company is also increasingly vocal about where it thinks AI belongs in IT operations. Rather than treating AI as a standalone feature or a marketing talking point, NinjaOne has embedded it into existing workflows: AI-driven vulnerability assessment, AI-powered patch confidence scoring, automated deployment decisions. The philosophy, as articulated by the company’s engineering leadership, is that AI should reduce the number of decisions an IT administrator has to make, not create new ones. In a market where many vendors are racing to add “AI-powered” labels to existing features, NinjaOne’s approach of baking intelligence into the operational loop rather than bolting it onto the dashboard is a meaningful differentiator, at least in principle. The proof will be in whether the autonomous patching engine can maintain its accuracy and reliability as the number of managed endpoints scales into the millions.

For European organisations, the timing of NinjaOne’s expansion is relevant. The NIS2 Directive, which came into force in October 2024, significantly broadened the scope of cybersecurity obligations across the EU, requiring affected organisations to implement risk management measures that include vulnerability handling, patch management, and supply chain security. Compliance demands the kind of continuous visibility and automated remediation that a unified platform provides more naturally than a collection of point solutions. NinjaOne has not yet disclosed European-specific customer numbers, but the regulatory pressure is likely to accelerate adoption in the region.

The competitive question is whether NinjaOne can continue growing at this pace as it moves upmarket. Its traditional strength has been the mid-market and managed service providers (MSPs), the IT firms that manage technology for small and medium businesses. The healthcare push, the F1 partnership, the Gartner recognition, and the expansion into asset management and vulnerability management all suggest a deliberate move toward larger enterprises. That is a different sales motion, with longer procurement cycles, more complex compliance requirements, and entrenched incumbents who are not inclined to cede territory without a fight.

Advertisement

The incumbents are not standing still, either. Kaseya has been aggressively integrating its acquisitions under a common platform umbrella and cutting prices to defend market share. ConnectWise has invested in its Asio platform to modernise its architecture. Microsoft Intune, which comes bundled with many enterprise licencing agreements, continues to expand its endpoint management capabilities. And a newer crop of competitors, including Kandji (focused on Apple device management) and Drata (compliance automation), are carving out niches that could eventually overlap with NinjaOne’s territory. The market for unified IT operations is consolidating, but it is also getting more crowded at the edges.

There is also the broader question of what “unified IT operations” actually means as the definition of an endpoint continues to expand. Today it is laptops, servers, and phones. Tomorrow it will include AI workloads, edge compute nodes, autonomous devices, and infrastructure that has not been invented yet. The vendors that win this market will be the ones whose platforms can absorb new endpoint categories without losing the simplicity that made them attractive in the first place. NinjaOne’s architecture was built with that kind of extensibility in mind. Whether it can deliver on that promise at enterprise scale, while maintaining the speed and simplicity that earned it a 96 per cent recommendation rate, is the test that lies ahead. As the regulatory landscape tightens (the EU AI Act’s most substantive obligations take effect in August 2026) and the definition of what needs to be managed keeps expanding, the companies that have bet on platform unification rather than point-solution accumulation are about to find out whether that bet pays off at scale.

Source link

Advertisement
Continue Reading

Tech

Best 4K Blu-ray Releases March 2026: Must-Buy Ultra HD Discs for Your Collection

Published

on

March came in loud, packed with headline-grabbing releases. But once the noise settled, the real gems started to surface. Away from the hype cycle, several of last month’s most compelling 4K UHD discs quietly made their case offering the kind of audio and video quality collectors actually care about. Before they slip into the back catalog and get overlooked, these are the titles worth your time and shelf space.

Marty Supreme (A24)

timothee-chalamet-marty-supreme

Not since Forrest Gump has the sport of ping pong been so cinematic (sorry, Balls of Fury), as we follow a small-time hustler (Timothée Chalamet, never better) pursuing his dreams of becoming a table tennis champ. Not necessarily a drop-everything-and-run-to-the-theater premise, but the talent in front of and behind the camera is all top-notch, as director Josh Safdie conjures the high-energy of Uncut Gems without inducing the same level of anxiety. Beautifully stylized, the movie was shot almost entirely on film by Darius Khondji, with outstanding results here at 2160p. Sonically, the movie is perhaps most notable for its totally original use of music, with composer Daniel Lopatin providing an anachronistic ‘80s-style synth score for deliberate contrast, along with some iconic new wave/pop hits woven in to echo Marty’s unstoppable determination. And of course, table tennis presents unique opportunities for object-based audio.

Unlike other A24 discs I’ve reviewed, this one includes the movie on 4K and 1080p discs, both with an audio commentary, plus a different featurette on each in addition to a camera test involving Chalamet and co-star Gwyneth Paltrow.

Where to buy: $39.99 at Amazon


Five Nights at Freddy’s 2 (Universal Studios Home Entertainment)

five-nights-freddys-2

Adults needing a new reason to be terrified at the thought of a trip to Chuck E. Cheese, rejoice! The middle chapter of Blumhouse’s Freddy’s trilogy has arrived (be sure to stick around for this movie’s end credits scene for context), and it’s a hoot. A security guard (Josh Hutcherson) and his little sister must once again survive the now-defunct funtime pizza palace, populated by possessed animatronic critters masterfully brought to life by Jim Henson’s Creature Shop. The story is darker, there are great additions to the cast, and some crafty nods to fans of the wildly popular videogame series, now over a decade old. The Dolby Vision/Atmos 4K disc makes an impressive showing in the home theater, and the four featurettes turn up the lights on how the scares came together.

Where to buy: $27.95 at Amazon

Advertisement

Is This Thing On? (Fox/Disney)

is-this-thing-on

The latest from director and co-writer Bradley Cooper might have slipped in under the radar in late 2025 and early 2026, but there is nothing subtle about what he delivers. Set against the volatile backdrop of modern radio, the film unleashes controlled chaos that mirrors the unraveling personal life of DJ Alex, played by Will Arnett. Cooper gets a career-best performance from Arnett as well as a heartfelt turn by Oscar-winner Laura Dern, these in addition to some subtle comic brilliance by Cooper himself, ultimately showing the redemptive power of humor. I love that Fox has packaged the movie as a flawless native 4K/Dolby Vision disc with Dolby Atmos audio, reaffirming their commitment to premium physical media. A modest but worthwhile “making of” featurette is provided on the HD Blu-ray disc, and with the digital copy as well.

Where to buy: $49.99 at Amazon


Red Sonja Limited Edition (Arrow Video)

red-sonja-arrow-video

Richard Fleisher’s Red Sonja, produced on the heels of his Conan the Destroyer to exploit the hot sword-and-sorcery market of the mid-‘80s, brought Robert E. Howard/Roy Thomas’ blade-wielding she-devil to live action for the first time. (For legal reasons, lead actor Arnold Schwarzenegger’s character had to be renamed, but they weren’t fooling anyone.) It’s like a well-made B-movie, as our statuesque ginger heroine seeks revenge on an evil queen, teaming with Conan and a young prince to stop her nemesis from conquering the world with dark magic. The 4K restoration from the original camera negative has been HDR-graded by Arrow, paired with the original lossless mono plus a 5.1 remix. There are also two new audio commentaries and a host of terrific interviews, among them former child star Eddie Reyes Jr., Arnold and Brigitte’s stunt doubles, and The Man: action unit supervisor Vic Armstrong.

Where to buy: $59.95 at Amazon


Salem’s Lot Limited Edition (Arrow Video)

salems-lot-4k-ultra-hd

Five years after directing one of the scariest movies ever put to film down in the Lone Star State, Tobe Hooper brought the work of Stephen King to the small screen with the bold vampire opus, Salem’s Lot. Airing over two consecutive nights in November 1979 and boasting an extraordinary cast, the miniseries was remarkably effective horror for primetime network TV. Recognizing the hit they had on their hands, the producer spearheaded a shorter cut with some added footage to be released theatrically overseas, and Arrow has included that version on a separate platter. Both versions are restored in 4K at old-school 1.37:1, with their original lossless mono, on roomy BD-100 discs. The miniseries has an archival Hooper commentary plus a new film critic track and alternate footage. The movie disc has its own new critic commentary, new interviews, featurettes and a video appreciation. Whereas Sonja includes a set of six black-and-white photocards, Salem includes a nifty town sign sticker instead.

Advertisement. Scroll to continue reading.

Both arrive in rigid, slipcased boxes, each with a square-bound companion book, a reversible sleeve insert, and a two-sided poster.

Advertisement

Where to buy: $59.95 at Amazon


Anaconda (2025; Sony)

anaconda-4k-ultra-hd

This 2025 meta‑reboot Anaconda is set in a world where that 1997 Anaconda exists: self-aware and wasting no chance to poke fun at Hollywood’s obsession with intellectual property and the absurdity of the original film. The best part is the pairing of Jack Black and Paul Rudd as a wedding videographer and struggling actor both determined to punch above their weight with their attempt at a low-budget remake. It manages to both parody and honor the legend of the giant-snake, embracing its own silliness with a PG-13 rating and some fun Easter eggs and cameos. Exclusively available as a SteelBook release, this single-disc Dolby Vision/Atmos 4K packs bloopers and outtakes, deleted and extended scenes, and some breezy featurettes. A digital copy code is also included.

Where to buy: $39.94 at Amazon


Antonio Margheriti & The Jungles of Doom: His ‘80s Adventure Films (Severin Films)

Antonio Margheriti Movies

The three films in Antonio Margheriti’s “Jonesploitation” cycle were produced at breakneck speed in the wake of Raiders of the Lost Ark (and happily overlapping with Temple of Doom), clearly imitating the formula of pulp-era adventurers, exotic locations, traps, relics, and mercenary villains. Don’t look for a “trilogy” in the true sense, as there’s no single continuing protagonist across the three films, just a loose cycle of similarly styled adventures:

  • The Hunters of the Golden Cobra (1982, U.S. release 1984) – starring Bob Jackson as David Warbeck
  • The Ark of the Sun God (1984) Richard Harrison as “Rick Spear” in the English version
  • Jungle Raiders (1985) Christopher Connelly as Captain Yankee

In Hunters of the Golden Cobra, a daring adventurer chases his latest treasure, proof that nothing says “Indiana Jones knockoff” like oversized snakes and dramatic leaping. Ark of the Sun God follows a new hero scrambling after a stolen prize in equally exotic locales, while Jungle Raiders sends yet another fearless soul into perilous forests to outwit villains, dodge booby traps, and survive physics-defying explosions.

All three are newly scanned in 4K from the OCN and presented in English and Italian mono, with optional English subtitles. Every disc includes a movie-specific interview with Margheriti’s son/assistant director, Edoardo, along with some other video odds and ends. Ark of the Sun God packs a third platter: a CD soundtrack covering both Golden Cobra and Ark, featuring the bombastic, pulsing music of Carlo Savina and Aldo Tamborelli, respectively.

The titles are available individually or as a set, with the glossy box itself also sold separately at Severin’s online store.

Advertisement

The Devil’s Rain (Severin Films)

devils-rain-4k-uhd-severin

Long live mid-budget ‘70s horror full of fading stars and one noteworthy up-and-comer! Bill Shat headlines this absolutely bonkers creeper about a Satanic cult led by Oscar-winner Ernest Borgnine, set in a remote Southwestern town. He’s opposed at first, by the likes of Eddie Albert, Ida Lupino and a young John Travolta in his first big-screen appearance. Well-researched rituals, stolen souls and plenty of psychedelic goo are on the menu in this wild classic, here scanned in 4K from the original camera negative for the first time. The extras are heavenly, with one archival audio commentary (director Robert Fuest) and one new (historian and comic book artist Stephen R. Bissette), along with an extensive talent interview gallery plus a conversation with the current leaders of the real-life Church of Satan on the included Blu-ray.

When purchased directly from Severin’s website, the two-disc set arrives in the limited edition slipcover shown.

Bonus Pick: The One You Probably Missed

Not every standout release arrives with a marketing blitz. Some slip through quietly, overshadowed by bigger titles and louder campaigns. This month’s bonus pick is one of those—easy to overlook, but absolutely worth tracking down if you care about what 4K UHD can really deliver.

All the President’s Men (Warner)

all-presidents-men-4k-ultra-hd

With all of the acclaim that Ben-Hur rightly received, Warner’s other mid-Feb. drop was largely overshadowed, so we therefore call your attention to All the President’s Men, which returned for its 50th anniversary. This tightly scripted true-life tale of hard news reporting and the power of the press that helped bring down a president might seem a bit alien to today’s viewers, but this excellent 4K disc makes the saga of Woodward, Bernstein and Deep Throat easier to swallow with a surprisingly stellar video restoration. Two new featurettes bring some welcome perspective, complementing three legacy vignettes and a vintage talk show clip with co-star Jason Robards.

Advertisement. Scroll to continue reading.

Where to buy: $29.98 at Amazon

Advertisement

Source link

Continue Reading

Tech

Sony PS-LX5BT Review – Trusted Reviews

Published

on

Verdict

Sony has replaced one of the very best pound-for-pound wireless turntables you could buy with one of the very best pound-for-pound wireless turntables you can buy. It’s not without its foibles, but the PS-LX5BT has an awful lot to recommend it

  • Sonic drive and detail in more-or-less equal measure

  • aptX Adaptive Bluetooth connectivity

  • Switchable phono stage

  • Sound is not absolutely balanced

  • Cannot adjust counterweight

  • Construction feels a little lightweight

Key Features

  • Trusted Reviews IconTrusted Reviews Icon

    Advertisement

    Review Price:
    £399

  • Wireless support

    Advertisement

    aptX Adaptive Bluetooth connectivity

  • Hi-fi set-up

    Advertisement

    Switchable phono stage

  • Playback

    Advertisement

    Fully automatic operation

Introduction

For six years and more, Sony’s PS-LX310BT was the go-to affordable Bluetooth turntable.

Time catches us with us all, though – and Sony has decided to replace the 310 with not one but two new models. This PS-LX5BT is the more expensive of the two new faces – does it have what it takes to follow a classic?

Advertisement

Advertisement

Design

  • Diecast aluminium platter
  • Weighs 3.6kg

Even with its diecast aluminium platter and its clear Perspex dust cover fitted, the PS-LX5BT tips the scales at a flyweight 3.6kg. A heavier turntable doesn’t automatically mean a better turntable, of course – but the weight of this Sony doesn’t inspire a whole lot of confidence.

Sony PS-LX5BT designSony PS-LX5BT design
Image Credit (Trusted Reviews)

That’s not to suggest the standard of construction or finish is in any way sub-par, though. The 117 x 430 x 366mm (HWD) deck is properly made, and all the physical controls operate with nice positivity. Sony has long been a master of giving an impression of quality no matter how much (or how little) it’s charging for a product, and the 5BT is no exception.

Features

  • aptX Adaptive Bluetooth connectivity
  • Switchable phono stage
  • Pre-fitted, pre-adjusted moving magnet cartridge

Fundamentally, the PS-LX5BT is ‘just’ a record player. It’s a belt-drive design, and can operate at 33.3 or 45rpm. It has an aluminium pipe tonearm, with a pre-fitted and pre-adjusted moving magnet cartridge attached to the business end. It has a rubber slip-mat.

But beyond this, Sony has piled on the features. Most significantly, the PS-LX5BT is a Bluetooth transmitter – it has the analogue-to-digital conversion circuitry required, and its compatibility with the aptX Adaptive codec means any similarly specified Bluetooth receiver (headphones, powered speakers, whatever) can receive a lossy 48kHz stream from the Sony.

Advertisement

Sony PS-LX5BT connectionsSony PS-LX5BT connections
Image Credit (Trusted Reviews)

The PS-LX5BT is also fitted with a phono stage, which is defeatable – so the output from the stereo RCA connections on the rear of the plinth can be at phono- or line-level. If you’re using the integrated phono stage, you can switch between three gain levels to ensure you’re getting an appropriate level of volume.

And it’s fully automatic in operation, too. There are controls to let the turntable know the size of the record on its platter (12-inch or 7-inch) and to let it know if it should turn the platter at 33.3 or 45rpm. There are three buttons (start, stop and up/down) to get things started or bring them to an end, and there is a button to initiate Bluetooth pairing.

Advertisement
Sony PS-LX5BT controlsSony PS-LX5BT controls
Image Credit (Trusted Reviews)

In practice, it all works very well and very reliably. Bluetooth pairing is swift, and once a connection is made it proves stable and robust. The automatic stop/start is equally dependable – and it’s to Sony’s credit that the PS-LX5BT will automatically play 45rpm 12-inch discs. Many automatic turntables can only equate 45rpm with 7-inch disc, but this one is a bit more adaptable.

About the only gripe I have where features are concerned centres around the tracking weight of the unbranded moving magnet cartridge. Sony suggests it’s been factory-set to 2.0g (+/- 0.5g), but my review sample has a weight of a little over 3.1g – which is on the hefty side but not fatally so. The inability to adjust the counterweight does mean you get what you’re given in this respect, though.

Sony PS-LX5BT record playingSony PS-LX5BT record playing
Image Credit (Trusted Reviews)

Performance

  • Energetic, direct and confident sound
  • Plenty of detail to go along with the drive
  • Not the most even or balanced presentation

Advertisement

There are differences, of course, between the way the PS-LX5BT sounds when wirelessly connected to a system and its sound when it’s hard-wired into the same system. What’s quite impressive, though, is how minor these differences are and how consistent the Sony sounds no matter the method of connection.

Wirelessly connected and playing a heavyweight reissue of Elaenia by Floating Points, the Sony’s fundamental character – energetic, forward and rhythmically sure-footed – is made immediately obvious.

Sony PS-LX5BT playbackSony PS-LX5BT playback
Image Credit (Trusted Reviews)

In ultimate terms the PS-LX5BT overstates the lowest frequencies in a recording, but it’s never bloated of draggy at the bottom of the frequency range – there’s plenty of variation to go along with the substance, and the control of attack and decay means tempos are handled confidently and rhythmic expression is naturalistic too.

Further up the frequency range there’s a similar amount of detail, both broad and fine, made available – and the tonal balance is, as with the lower frequencies, quite carefully neutral. The midrange is also very revealing of the PS-LX5BT’s ability to create an open and spacious soundstage, even though it’s probably nudged forward just a little when compared to what’s occurring around it.

Advertisement

There’s plenty of dynamic headroom available too, so when the recording really ramps up the intensity the Sony is able to track those fluctuations and express them coherently. It’s pretty adept where the dynamics of harmonic variation are concerned, too – its ability to paint what sounds very much like a complete picture in dynamic terms is never less than impressive.

Sony PS-LX5BT in a systemSony PS-LX5BT in a system
Image Credit (Trusted Reviews)

Advertisement

At the top of the frequency range, though, the PS-LX5BT changes its tune just a little. There’s still detail revealed and a definite sense of energy at the top end, but treble sounds are a little insubstantial in comparison with the rest of the frequency range and can, in extremis, sound a touch splashy.

Switch to a wired connection, engage the integrated phono stage and set gain to ‘mid’, and the Sony seems to double down on its sonic characteristics, for both good and bad. It remains a quite forceful and upfront listen, but its low-frequency preoccupation becomes a little more pronounced and its relative lack of high-frequency substance becomes a little more apparent.

In the broadest terms, though, the Sony sounds identifiably like its wireless self – which can only be good news. 

Advertisement
Sony PS-LX5BT dust coverSony PS-LX5BT dust cover
Image Credit (Trusted Reviews)

Should you buy it?

You enjoy fuss-free vinyl parties

You’re after as painless and convenient a vinyl experience as this sort of money can buy

Advertisement

The performance to match its wired counterparts

You’re expecting sound quality comparable to that of a ‘dumb’ £400 turntable

Advertisement

Final Thoughts

I am familiar enough with the outgoing PS-LX310BT to anticipate good things from the PS-LX5BT – but despite its little inconsistencies where outright sound quality is concerned, I’m nevertheless startled at just how accomplished and easy to live with this turntable is.
 
Which I suppose means the lesson is: never doubt Sony’s ability to get where it intends to go.

Advertisement

How We Test

I connected the PS-LX5BT to an Eversolo DAC-Z10 pre-amplifier via aptX Adaptive Bluetooth, and also to its analogue input using both the deck’s integrated phono amplification and via a Leema Elements phono stage.

Advertisement

The Eversolo is connected via XLR to a Cambridge Edge W stereo power amplifier, which is in turn connected to a pair of Bowers & Wilkins 705 S3 Signature loudspeakers.

I also connected the Sony to a pair of the company’s WF-1000XM6 true wireless in-ear headphones.

  • Tested for several days
  • Tested with real world use

FAQs

Can I connect directly to my headphones?

As long as they’re wireless headphones, then Bluetooth connectivity is available. There’s no headphone socket here, though.

Advertisement
What should I do if the tracking weight is too much or too little?

I’m afraid you’re stuck with it – there’s no ability to adjust the counterweight here.

Advertisement

Full Specs

  Sony PS-LX5BT Review
UK RRP £399
USA RRP $499
EU RRP €449
CA RRP CA$549
AUD RRP AU$599
Manufacturer Sony
Size (Dimensions) 430 x 366 x 117 MM
Weight 3.6 KG
Release Date 2026
Turntable Type Belt Drive
Speeds (rpm) 33.3, 45
Ports Stereo RCA
Connectivity Bluetooth 5.3
Colours Black

Source link

Continue Reading

Tech

Toshiba starts shipping SMR MAMR enterprise hard drives offering up to 34TB of storage

Published

on


Toshiba’s M12 Series of 3.5-inch drives uses Shingled Magnetic Recording to achieve storage capacities ranging from 30 to 34TB. The Japanese corporation – one of the world’s largest HDD manufacturers alongside Seagate and Western Digital – said the new line of drives is specifically designed for hyperscale customers, cloud service…
Read Entire Article
Source link

Continue Reading

Tech

OpenClaw gives users yet another reason to be freaked out about security

Published

on

For more than a month, security practitioners have been warning about the perils of using OpenClaw, the viral AI agentic tool that has taken the development community by storm. A recently fixed vulnerability provides an object lesson for why.

OpenClaw, which was introduced in November and now boasts 347,000 stars on Github, by design takes control of a user’s computer and interacts with other apps and platforms to assist with a host of tasks, including organizing files, doing research, and shopping online. To be useful, it needs access—and lots of it—to as many resources as possible. Telegram, Discord, Slack, local and shared network files, accounts, and logged in sessions are only some of the intended resources. Once the access is given, OpenClaw is designed to act precisely as the user would, with the same broad permissions and capabilities.

Severe impact

Earlier this week, OpenClaw developers released security patches for three high-severity vulnerabilities. The severity rating of one in particular, CVE-2026-33579, is rated from 8.1 to 9.8 out of a possible 10 depending on the metric used—and for good reason. It allows anyone with pairing privileges (the lowest-level permission) to gain administrative status. With that, the attacker has control of whatever resources the OpenClaw instance does.

“The practical impact is severe,” researchers from AI app-builder Blink wrote. “An attacker who already holds operator.pairing scope—the lowest meaningful permission in an OpenClaw deployment—can silently approve device pairing requests that ask for operator.admin scope. Once that approval goes through, the attacking device holds full administrative access to the OpenClaw instance. No secondary exploit is needed. No user interaction is required beyond the initial pairing step.”

Advertisement

The post continued: “For organizations running OpenClaw as a company-wide AI agent platform, a compromised operator.admin device can read all connected data sources, exfiltrate credentials stored in the agent’s skill environment, execute arbitrary tool calls, and pivot to other connected services. The word ‘privilege escalation’ undersells this: the outcome is full instance takeover.”

Source link

Advertisement
Continue Reading

Tech

Tesla beats BYD in Q1 2026 EV sales but inventory build and Europe slump cloud the win

Published

on

Tesla delivered 358,023 battery electric vehicles in the first quarter of 2026, edging past BYD’s 310,389 pure electric sales to reclaim the global quarterly BEV lead it surrendered across all of 2025. The margin, roughly 48,000 units, was enough for the headline. What it was not enough to do was silence the questions multiplying around Elon Musk’s car company.

The 358,023 figure, reported on Thursday, missed the Wall Street consensus of 365,645 by about 7,600 vehicles, and Tesla’s stock promptly fell more than 5 per cent in its steepest single-day drop of the year. The company has now lost roughly 20 per cent of its market value since January. More troubling than the miss itself was the gap between production and deliveries: Tesla built 408,386 vehicles during the quarter but shipped only 358,023, adding more than 50,000 units to inventory in a single period. That is a demand signal, not a logistics hiccup.

Year on year, deliveries rose 6.3 per cent from Q1 2025’s 336,681 units. But Q1 2025 was Tesla’s weakest quarter in years, depressed by production shutdowns across all four factories for the transition to the refreshed “Juniper” Model Y. Beating a trough is not the same as demonstrating recovery. The Model 3 and Model Y accounted for 341,893 of the quarter’s deliveries, with production of those two models reaching 394,611, meaning the inventory build was concentrated in Tesla’s bread-and-butter vehicles. The Cybertruck offered the one unambiguous bright spot, surging 111 per cent year on year to 38,500 deliveries.

BYD’s quarterly dip, meanwhile, requires its own set of caveats. The Chinese New Year holidays fall in Q1 and consistently depress domestic purchase volumes, making the period BYD’s weakest for pure electric sales every year. BYD sold 700,463 new energy vehicles in total during the quarter, nearly double Tesla’s output, though that figure was down roughly 30 per cent from Q1 2025 and reflects a deliberate strategic pivot: consumers and BYD itself are shifting toward the company’s DM-i and DM-p plug-in hybrid platforms, which offer extended-range flexibility that pure electric models cannot yet match in China’s vast interior markets.

Advertisement

The 💜 of EU tech

The latest rumblings from the EU tech scene, a story from our wise ol’ founder Boris, and some questionable AI art. It’s free, every week, in your inbox. Sign up now!

The full-year context makes the quarterly headline even less convincing as a trend reversal. In 2025, BYD delivered 2,254,714 BEVs to Tesla’s 1,636,129, a gap of more than 600,000 units that no amount of seasonal fluctuation will close. BYD’s domestic market share did contract from 27 per cent to 17 per cent in the first two months of 2026, squeezed by a ferocious price war and the expiration of government purchase subsidies at the end of 2025. But the company is compensating with an aggressive international push: overseas shipments hit 120,083 vehicles in March alone, a 65 per cent year-on-year increase that means roughly 40 per cent of BYD’s monthly sales now come from export markets for the first time. It is precisely the kind of rapid geographic diversification that Europe’s own technology and industrial champions have struggled to execute at comparable speed.

Tesla’s European position has deteriorated more sharply than any other major market. Registrations across the EU, EFTA, and UK fell 17 per cent in January from an already weak prior-year base, with Norway down 88 per cent after the country terminated long-standing EV tax exemptions on 1 January, the Netherlands cratering 67 per cent, and France declining 42 per cent. The causes are structural, not cyclical. Musk’s role in the Trump administration’s Department of Government Efficiency triggered a global boycott movement that saw protests at Tesla showrooms in more than 250 cities. Dan Ives, the Wedbush Securities analyst long regarded as one of Tesla’s most prominent advocates on Wall Street, warned that demand would be permanently reduced by roughly 10 per cent, arguing that the brand damage from Musk’s political activities would be stained forever in Europe and the US.

Advertisement

March brought partial relief. Tesla’s European registrations tripled in France and more than doubled in the Nordic countries, though from the catastrophically low bases that January and February had established. Whether that trajectory holds depends in large part on whether European consumers are willing to separate the product from its chief executive, a question that Chinese competitors repositioning their manufacturing inside European borders are not giving them much time to deliberate.

The tariff environment is compounding the competitive pressure. EU levies on Chinese-made electric vehicles now reach as high as 28.8 per cent for some manufacturers, and the United States has layered its own duties on top. That has pushed Chinese automakers including Geely and BYD to localise production in Europe and South-East Asia, a strategy that, once operational, will eliminate the tariff disadvantage while preserving the cost advantages of a vertically integrated Chinese battery supply chain that European manufacturers have been unable to replicate. BYD is already building factories in Hungary, Turkey, and Thailand, and its 2026 overseas sales target has reportedly been raised to 1.5 million units.

For Tesla, the strategic challenge extends beyond any single quarter’s delivery figures. The company produced 50,000 more vehicles than it could sell in Q1, its energy storage deployments fell 38 per cent from the prior quarter, and its stock has entered 2026 in a sustained decline. Musk has signalled a pivot toward autonomous vehicles and robotaxis as the next growth engine, but the core car business, the one that generates the revenue to fund everything else, is showing signs of a demand ceiling in its most important markets.

BYD, by contrast, is managing a controlled transition from pure electric dominance toward a hybrid-plus-export model that diversifies its revenue geography and product mix simultaneously. Its BEV numbers dipped this quarter for reasons that repeat every year. Tesla’s numbers disappointed for reasons that might not.

Advertisement

The quarterly BEV crown is a useful metric, but it measures one dimension of a contest that has become far more complex than a simple unit count. The question is no longer which company sells more pure electric cars in a given three-month window. It is which company’s business model, manufacturing footprint, and brand resilience are best positioned for a global automotive market in the middle of its most disruptive transition since the internal combustion engine replaced the horse. On that broader scorecard, a 48,000-unit quarterly lead is not the answer Tesla needs it to be.

Source link

Advertisement
Continue Reading

Tech

A Year After DOGE Cuts, GSA Now Plans to Hire Hundreds of Employees

Published

on

A year after Elon Musk’s so-called Department of Government Efficiency (DOGE) effectively fired thousands of government employees, one federal agency that was affected by those cuts is now preparing to hire hundreds of people.

The General Services Administration (GSA), an agency that oversees the government’s IT department and real estate holdings, is hiring “approximately 400 positions” across its Public Building Service (PBS) division, according to an email obtained by WIRED.

“We’re thrilled to announce that the GSA Strategic Hiring Committee has approved the PBS staffing plan designed to address our workforce needs and strengthen our teams,” states an email sent by PBS chief of staff Donna Dix to employees on Monday.

The email goes on to say that the hiring effort will focus on “the most significant areas of need: facilities management, acquisition, and project management.”

Advertisement

GSA did not respond to a request for comment.

PBS, which manages the federal buildings under GSA’s banner, lost hundreds of employees in March 2025 following DOGE cuts. The agency, WIRED reported at the time, was also instructed to sell off more than 500 government buildings, some of which housed government agencies and the offices of US senators. One of the properties on the list was a sensitive complex housing a CIA facility in Northern Virginia. Since then, the agency has walked back the extent of these plans, and instead doubled down on assisting Immigration and Customs Enforcement (ICE) expand across the US. WIRED reported in February that GSA and PBS were assisting ICE’s plans to lease offices throughout the US as part of a massive expansion campaign.

This isn’t the first time that PBS has announced plans to rehire or replace federal employees cut by DOGE. In September, hundreds of PBS employees were given the opportunity to return to work months after they accepted a deferred resignation offer, effectively making their half-year separation an extended vacation.

Stephen Ehikian, the former acting head of the GSA, left the agency in September 2025 after conducting extensive layoffs. As of last May, 2,100 workers took deferred resignation and 1,000 more were laid off. “The opportunity we had was to restructure [GSA], slim it down, and now the team’s in a phenomenal position to build it back the way they want,” he told Nextgov at the time. Ehikian’s wife previously worked for Elon Musk’s social media firm X.

Advertisement

Since leaving the government, Ehikian has moved into the private sector, running the enterprise AI firm C3 AI. Earlier this year, the company announced significant cuts to its workforce. Its stock plunged 17 percent following the announcement.

Source link

Continue Reading

Tech

Dell packs full desktop performance into a palm-sized device that’s powered entirely through a single USB-C connection

Published

on


  • Dell Pro 5 Micro delivers desktop-class computing in an ultra-compact form
  • Single USB-C input allows powering directly from compatible Dell Pro monitors
  • Integrated NPU provides 50 TOPS performance for on-device AI acceleration

Dell is shrinking the office desktop computer down to a block which can sit entirely behind a monitor while still doing the work of a full-sized business PC.

The new Dell Pro 5 Micro Desktop ditches the traditional tower for an ultra-compact form, which suits offices where desk space is limited and cable clutter is a visible problem.

Source link

Advertisement
Continue Reading

Tech

Quordle hints and answers for Saturday, April 4 (game #1531)

Published

on

Looking for a different day?

A new Quordle puzzle appears at midnight each day for your time zone – which means that some people are always playing ‘today’s game’ while others are playing ‘yesterday’s’. If you’re looking for Friday’s puzzle instead then click here: Quordle hints and answers for Friday, April 3 (game #1530).

Quordle was one of the original Wordle alternatives and is still going strong now more than 1,400 games later. It offers a genuine challenge, though, so read on if you need some Quordle hints today – or scroll down further for the answers.

Advertisement

Source link

Advertisement
Continue Reading

Tech

12 Home Improvement Tools Under $75 That Are Actually Worth Buying

Published

on





We may receive a commission on purchases made from links.

Every time you head to the hardware store, it seems like there’s a new cordless version of a tool you already own or a big company launching a tool to solve a problem you didn’t even know you had. It can be tough to navigate the constantly rotating inventory of hardware stores, whether you’re shopping in stores or online. Deciding what’s actually worth your hard-earned money is a hassle for both new homeowners building a tool collection from scratch and seasoned veterans simply looking to spend some extra cash on a new useful tool.

Of course, different renovation projects require different tools. Giving your bathroom a modern makeover is a much more involved project than organizing and hanging a photo wall. While each project might require a few specialized tools, there’s still a wealth of tools most homeowners would consider essential to have on deck at all times. We’ve rounded up 12 of these go-to tools, all of which are affordably priced under $75, well-reviewed, and can easily prove their worth after just a few uses.

Advertisement

Vonforn Paint Sprayer

If you have a ton of painting planned for future renovations, a paint sprayer will make the process much faster and easier. The Vonforn Paint Sprayer is equipped with a 700-watt motor, an attached container that can hold up to 1200 milliliters of paint, and adjustable flow control with four different nozzle sizes, including 1mm, 1.5mm, 2mm, and 3mm.

Advertisement

There are also three spraying patterns you can swap between — horizontal, vertical, and circular — to suit the needs of different projects. You can use this sprayer to put a fresh color on iron patio furniture or your kitchen chairs, to liven up an entire room in your home, or to paint pretty much anything else you can think of, including fences, doors, and cabinets.

Vonforn’s sprayer tool comes with a dust blowing joint that makes it easy to clear away dust and debris from the surface you’re about to paint. Then, cleaning up after you’re done painting is just as simple. The sprayer comes with a nozzle cleaning needle and a cleaning brush for the parts you’ll need to manually clean, and you can hook up the cleaning connector to your faucet to wash out any paint coating the pipe inside.

Advertisement

Ryobi One+ 18V Cordless Drill/Driver Kit with Battery, Charger, and Bits

One of the best home improvement tools you can invest your money in is a good drill. The Ryobi One+ 18V Cordless Drill/Driver slides in at just under $75 and comes with a battery, a charger, and a 40-Piece Impact Drive Kit. Among the kit’s 40 total pieces, there are 14 one-inch impact drive bits, 12 black oxide drill bits, four bradpoint drill bits, four two-inch impact drive bits, three impact nut drivers, two woodboring spade bits, one impact magnetic bit holder, and a clear case to neatly hold everything.

As for the drill itself, it features a 3/8-inch keyless chuck, a variable speed trigger with possible speeds up to 600 RPM, and a built-in LED light to help you work in dark spots. Thanks to its lightweight of 2.8 pounds (without the battery), it’s comfortable to hold for long projects, and there’s an easy button to switch it between forward and reverse modes. And like many of Ryobi’s power tools, this 18V Cordless Drill is backed by a 3-year manufacturer’s warranty.

Advertisement

Motovera Self-Leveling Laser Level with Tripod

The laser level is easily one of the most underrated home improvement tools. You might not need it often, but when you need to hang some pictures, curtains, or any other decor piece in your home, you’ll be grateful for your laser level. The Motovera Self-Leveling Laser Level is quite an affordable option, and it comes with an aluminum tripod to make the process of hanging anything even easier. The tripod can extend from 15 to 46 inches in height, swivel a complete 360 degrees, and tilt 90 degrees.

The level is equipped with a green light that Motovera says is about four times the brightness of standard red lasers and stays visible on walls up to 100 feet away from the level. If you don’t need 100% brightness, you can adjust it down in 25% increments. You can manually set the laser’s trajectory or use the built-in self-leveling mode, which can level within about four degrees of accuracy. If you need to hang something outside in drizzly or dusty conditions, no worries. The level has IP54 dust and water resistance, and it’s able to survive accidental drops from up to 30 inches.

Advertisement

Skil 15-Amp Circular Saw

If you take on lofty home improvement projects, you might benefit from adding a circular saw to your collection. For quickly making precise, straight cuts in wood, metal, plastic, and other materials, there’s no better tool than a circular saw. The Skil 15-Amp, 7.25-Inch Circular Saw, in particular, is one home improvement tool designed to last a long time and carry you through hundreds of renovation projects.

Advertisement

This circular saw by Skil features a 24-tooth, 7.25-inch carbide blade, a 15-amp motor capable of working up to 5,300 RPM, a 51-degree bevel capacity with a positive stop at 45 degrees, and a durable bag to neatly pack it away when you’re not using it. There are also quite a few built-in safety features, like a laser to guide you while making cuts, a spindle lock to make it easier to swap out the blade, and a guarded trigger paired with a power-on indicator to prevent accidental starts. Then, a built-in dust blower helps keep the area and your line of sight free of sawdust while working.

Advertisement

Kobalt 158-Piece Household Tool Set with Folding Case

A must-have home improvement tool for renters and homeowners is a solid set of basic tools. It doesn’t necessarily need to be super fancy or high-quality, but it should ideally have a good mix of screwdrivers and other tools needed to hang pictures, put furniture together, and carry out simple repairs around your home. For a budget of $75 or less, we’re fans of the Kobalt 158-Piece Household Tool Set from Lowe’s.

Inside, there’s a 12-foot tape measure, a fiberglass hammer, some scissors, a nine-inch liquid level, a set of eight Metric and eight SAE hex keys, some pliers, an adjustable wrench, multiple precision screwdrivers, and a screwdriver handle with 20 essential bits — and that’s not even naming everything included among this kit’s 158 pieces, many of which are made with Chrome Vanadium steel. To keep everything organized well, this Kobalt kit comes with a hard storage case and molded spots for each included tool.

If this $60 household tool set is out of your price range, no problem. Instead, take a look at the best home improvement tools under $10 we rounded up to start your collection.

Advertisement

Dremel 3100 Rotary Tool Kit

If you love putting finishing touches on each renovation project, a rotary tool kit is a must. You can use a good rotary tool to make small, precise cuts, sand surfaces, drill, engrave, carve, sharpen, grind, clean, and polish all kinds of materials, including wood, brass, metal, seashells, terracotta, and more. For less than $75, this Dremel 3100 Rotary Tool Kit comes with the rotary tool itself, an extra attachment, and 15 accessories. If you opt for only the rotary tool and a few accessories, you can often find this home improvement tool for under $50.

Dremel’s 3100 Rotary Tool features a 1.2-amp, variable speed motor with five total speeds between 5,000 and 35,000 RPM to experiment with. It has an EZ twist nose cap that makes swapping out accessories a breeze, a lightweight main body that’s easy to grip and made with 65% recycled plastic, and a 6-foot power cord that allows you plenty of room to work without needing to worry about the battery dying mid-project.

Advertisement

Workpro 8-Piece Flex-Head Ratcheting Wrench Set

This Workpro 8-Piece Ratcheting Wrench Set may be more expensive than a basic wrench set, but if you’ve ever worked on a project that involves using wrenches a lot, you know how invaluable the ‘ratcheting’ feature can be in a tool set. Here are all the sizes included in this particular set: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4 inches. It’s easy to use any of these wrenches in tight spaces, thanks to each wrench being equipped with a 180-degree pivoting head and a 72-tooth ratchet gear that needs only a five-degree swing arc.

Advertisement

Plus, the quality you get from Workpro’s wrenches is pretty great. Each of the wrenches in this set is constructed with heat-treated Chrome Vanadium steel and nickel-plated to prevent rust and corrosion. To further protect the tools, the set comes with a rolling pouch that’s made with durable, tear-resistant 1680D polyester material, has pockets with size markings for each wrench, and has four total fasteners to ensure the wrenches stay put while traveling.

Advertisement

Stanley 6-Gallon Wet/Dry Shop Vacuum

If the only byproduct your renovation project has stirred up is a little dust and other small debris, you can probably use your home vacuum to clean up. But for many home improvement projects, there are nails, staples, big chunks of wood or sheetrock, other large materials, and occasionally liquids — all of which shouldn’t be sucked up by your everyday vacuum. Instead, you need a shop vac.

A good choice under $75 is Stanley’s 6-Gallon Shop Vacuum, equipped with a four peak-horsepower motor that promises powerful suction for dry debris and wet spills. In addition to seamlessly cleaning up these messes, it’s also capable of blowing air, great for clearing away leaves in your yard, quickly drying swimsuits, or airing up some inflatables.

With its 10-foot power cord, 6-foot hose, and two extension wands, you can clean over 16 feet away from an outlet. It also comes with a ton of accessories, including a crevice nozzle that’s great for cleaning vehicle seats, a floor nozzle, a gulper nozzle, a foam filter for wet debris, a reusable filter for dry debris, and a disposable filter bag. There are four spots above each wheel where you can store up to four nozzles or wand accessories.

Advertisement

Wetols 27-in-1 Multi-Tool

Sometimes, multi-tools can be seen as a tool that’s only useful for outdoor enthusiasts or trades professionals, but they’re also insanely practical for DIYers taking on multiple home improvement tasks. By definition, they’re packed with multiple tools in a compact, pocket-sized footprint, and many of the tools they include are ones used frequently in renovation projects. For its value, we love the Wetols 27-in-1 Multi-Tool. It’s well under $75 (and often goes on sale for much less), made with hardened stainless steel that’s resistant to rust and corrosion, and comes with so many tiny yet quality tools.

Just to name a few of its most helpful tools for tackling home projects, it’s equipped with a small hammer, needle nose pliers, soft and hard wire cutters, a double tooth saw, a serrated blade, a knife, and multiple different screwdriver bits. Less practical tools that are still neat include a fire starter, a window breaker, a whistle, a wood and metal file, and an opener for bottles and cans. If you wanted a cheaper multi-tool with less tools, check out Wetols’ 21-in-1 Multi-Tool, a stellar option that’s surprised many Amazon users with impressive quality for its price.

Advertisement

Kobalt 15-Inch Carbon Steel Pry Bar

Sometimes, the best tool for the job isn’t the smartest or the most powerful; it’s the simplest. This 15-Inch Carbon Steel Pry Bar by Kobalt isn’t much to look at, but it’s capable of quite a lot. It’s essentially a long, thin bar of forged and heat-treated carbon steel with a matte finish, all coming together to increase its strength, durability, and wear resistance.

Advertisement

This unassuming pry bar will keep your home repairs simple, especially when it comes to the demolition portion of a project. On one end of the bar, there are two different slots to help you safely pull nails out of wood, metal, flooring, and other materials. Then, if you need to lift or separate wooden boards, baseboard trim, clapboard siding, or pretty much any other material, you can use the pry bar’s other end to get great leverage. Plus, if you need to remove a small amount of drywall, you can simply use the pry bar instead of opting for a dedicated mallet or hammer.

Advertisement

Bauer 5-Inch Random Orbit Palm Sander

Countless home improvement projects involve sanding. While you can certainly take on the process manually with individual sandpaper sheets or tackle small areas with a rotary tool, nothing can really compare with a power random orbit palm sander for big projects. A simple power sander is one home improvement tool some people don’t realize exists, but once you use one, you’ll wonder why you didn’t grab one sooner.

To save quite a bit of money on this helpful power tool, we’d recommend looking for the Bauer 5-Inch Random Orbit Palm Sander at affordable retailer Harbor Freight. This sander features a grippy rubber handle, variable six-speed control, a dust collection chamber, and a 2.8-amp, fan-cooled motor with sealed bearings that’s capable of producing up to 13,000 OPM (orbits per minute). Its random orbital action moves only 3/32 of an inch to give your surface a swirl-free finish, and the six-foot power cord gives you adequate leeway to move around.

Advertisement

Quinn 66-Piece SAE and Metric Socket Set

Owning a socket set allows you to work on your vehicles as well as bicycles, some furniture, and various home improvement tasks. That said, for most homeowners or renters who rely on a mechanic for vehicle-related work, there’s no need to spend an arm and a leg on a super high-quality socket set. Instead, opt for an affordable yet reliable option through Harbor Freight, like this Quinn 66-Piece SAE and Metric Socket Set.

Quinn’s Socket Set comes with three 72-tooth, quick-release ratchets, three extension bars of various sizes, 26 1/4-inch sockets, 28 3/8-inch sockets, and six 1/2-inch sockets. All the sockets and ratchets are crafted with Chrome Vanadium steel to boost durability and resistance to rust, scratches, and corrosion. Then, every socket features a high-visibility marking and the SAE and Metric sockets are color-coded to make it easier to grab exactly what you’re looking for. To keep the whole set organized, each piece has its own dedicated spot in the included blow-molded storage case.

Advertisement

Methodology

To create this list of home improvement tools that are actually worth your money, we used specific criteria to guide us while searching online stores. Each tool we selected needed to have at least 100 reviews, an average rating of at least 4 stars, and a price below $75. That said, except for a few items on this list, most items have well over 1,000 reviews and an average rating of at least 4.6 stars.

We scoured hundreds of possible tools online at these popular hardware retailers: Amazon, Lowe’s, Home Depot, and Harbor Freight. We tried to choose a good mix of tools that are essential for new homeowners to start their collection with, as well as tools that established homeowners might not have yet, but are incredibly useful.

Advertisement



Source link

Advertisement
Continue Reading

Trending

Copyright © 2025