Beyerdynamic has built its reputation making headphones and in-ear monitors for working professionals, spending decades refining products for studio and stage use. It should therefore come as little surprise that the company has introduced a new entry-level model for aspiring sound professionals, the DT 30 IE.

Priced at $149.99, the DT 30 IE brings some of the thinking behind Beyerdynamic’s more expensive DT 70-73 IE series stage monitors to a price point that students, musicians, engineers, and other working users can more realistically afford.

That matters because the professional market has very different priorities from the broader headphone category. While much of the industry continues to push wireless connectivity, ANC, apps, and spatial audio, Beyerdynamic is addressing a more practical problem: professionals still need durable, low-latency wired monitors that can survive daily use and deliver consistent sound without depending on batteries, codecs, or software.

For musicians and engineers, an in-ear monitor is a tool first. Sound quality matters, but so do isolation, fit, durability, and the ability to trust what you are hearing every time you plug in. Expectations are high, even at the entry level, because unreliable monitoring can become a much bigger problem than simply having a bad listening experience.

Related Reading:

Design, Fit & Durability

The DT 30 IE retains the basic shape and appearance of the earlier DT 70-series in-ears, but the earpieces are made from clear polymer rather than the black material used for their higher-end siblings. The cable is also similar in design to the DT 70-series version, with MMCX connectors, memory wires, a chin slider, and a 3.5 mm plug. Once again, color distinguishes the two, with the DT 30 IE sporting a white cable.

The case and accessories are also extremely similar to those supplied with the DT 70 series. A small square clamshell case holds the cable and earpieces separately, along with several sizes of both foam and silicone ear tips.

The overall construction feels purposeful rather than luxurious. This is an earphone meant to be used, packed away, and used again, not displayed. The clear polymer is deceptively tough. I had some initial concerns because I’ve encountered other products with what appeared to be similar construction that broke the first time they were knocked off a desk.

I put the DT 30 IE through a workout, some of it intentional and some accidental, and I can assure readers that the earpieces will survive a drop from table or even ear height. The cable is sturdy as well and should hold up to repeated gigs with reasonable care. Everything about the DT 30 IE suggests that this is an entry-level professional product rather than one designed primarily for consumers.

I selected the largest silicone tips, attached the cable, and prepared to begin my listening sessions, only to run into an issue. The DT 30 IE sits fairly shallowly in the ear, and while I could achieve a good seal when inserting the earpieces, the moment I wrapped the memory wire over my ear, that seal would break.

I tried repeatedly, both with and without my glasses, and never achieved an acceptable seal using the silicone tips. With glasses, it was a complete no-go. Without them, the earpiece would seal initially but pop loose as soon as I moved my head.

Back to the kit I went for the largest pair of foam tips. Those solved the problem, providing a good seal even with my glasses pressing against the memory wires. I also tried an Estron cable and found that it did not create the same issue, allowing me to use the large silicone tips without having to fight with the fit.

Fit is crucial with any in-ear monitor, and the DT 30 IE sounds very thin when the seal is compromised. Because of its relatively shallow insertion depth, some listeners may need to use a larger tip than they normally would to maintain a proper seal. The foam tips also retain more low-end energy than the silicone alternatives, so anyone auditioning the DT 30 IE should spend some time with both before deciding which works best.

Internals & Drive Requirements

The DT 30 IE uses a single 11 mm dynamic driver rather than one of Beyerdynamic’s Tesla designs. Specific details about the diaphragm materials are difficult to come by, with Beyerdynamic describing it simply as a German-designed 11 mm driver.

Nominal impedance is rated at 18 ohms, with a frequency response of 5 Hz to 20 kHz and a sensitivity of 111 dB/mW. Those specifications place the DT 30 IE firmly in the extremely easy-to-drive category, making it suitable for everything from portable recorders and interfaces to phones and dongle DACs.

That high sensitivity does come with a potential downside. Pair the DT 30 IE with an amplifier or source with a higher noise floor, and some background hiss may become audible. There is also very little need for aggressive volume settings here; the DT 30 IE reaches useful listening levels with minimal power.

Specifications:

• Type: Wired in-ear monitor
• Driver: Single 11 mm dynamic driver
• Driver Design: Non-Tesla
• Frequency Response: 5 Hz – 20 kHz
• Impedance: 18 ohms
• Sensitivity: 111 dB/mW
• Earpiece Material: Clear polymer
• Cable Connection: MMCX
• Cable: Detachable white cable with memory wire and chin slider
• Source Connector: 3.5 mm
• Ear Tips: Multiple sizes of silicone and foam tips
• Included Case: Square clamshell carrying case

Listening

The first thing that stands out about the DT 30 IE is its sense of balance. It does not push the bass forward merely to create instant excitement, nor does it chase the exaggerated upper-treble brightness that is sometimes mistaken for detail.

Sub-bass extension is good, but you have to look for it. Tracks that do not emphasize the lowest frequencies can make the DT 30 IE sound somewhat deficient in this region, but recordings with meaningful sub-bass content reveal that it is more capable than first impressions might suggest.

Bass is tight and reasonably deep, with enough weight to give kick drums and electric bass a proper foundation. It is not especially tactile or punchy, but presence and control are both good, which fits the DT 30 IE’s professional focus.

The midrange is its strongest area. Vocals have excellent intelligibility, acoustic guitars retain their texture, and electric guitars have enough edge without becoming abrasive. Strings have good energy without turning harsh, while piano is reproduced with convincing body and clarity.

Treble is clean, moderately detailed, and reasonably extended. Cymbals have definition without sounding tinny, and smaller recording details are generally easy to locate. The tuning is slightly polite in this region, which helps reduce fatigue during long listening sessions or extended set lists.

That does not mean the DT 30 IE glosses over poor recordings. Nasal vocal tones and sibilance are still easy enough to hear when they are present, so the softer treble balance should not be mistaken for an overly forgiving presentation.

The soundstage is fairly intimate, with slightly more width than depth. Imaging benefits from solid instrument separation, and placing individual performers within an orchestral recording is relatively straightforward. Stereo separation is also good, and layered arrangements remain coherent at moderate volume, although some congestion begins to appear as volume increases with particularly dense material.

Overall, the DT 30 IE is especially well suited to vocal-heavy music, small jazz ensembles, acoustic recordings, and live performances. That balance between clarity, separation, and long-term listenability feels very much in line with what Beyerdynamic intended for an entry-level professional monitor.

The Bottom Line

The Beyerdynamic DT 30 IE is aimed squarely at musicians, students, engineers, and working professionals who need an affordable, durable in-ear monitor with balanced tuning and low listening fatigue. Its controlled bass, articulate midrange, and restrained treble make it better suited to monitoring vocals, instruments, and live performances than chasing oversized bass or exaggerated detail.

Fit is the main caveat. Eyeglass wearers may struggle with the supplied memory-wire cable, and some listeners may need foam tips or an alternative cable to maintain a proper seal.

At $149.99, the DT 30 IE is an easy recommendation as a reliable backup for performers already using custom IEMs or Beyerdynamic’s more expensive DT 70-series models. For the gig bag, that kind of inexpensive insurance makes a lot of sense.

Pros:

• Balanced, professional-focused tuning
• Excellent midrange clarity and vocal intelligibility
• Tight, controlled bass
• Non-fatiguing treble
• Good imaging and instrument separation
• Very easy to drive
• Durable construction
• Detachable MMCX cable
• Foam and silicone tips included
• Strong value as a primary or backup stage monitor

Cons:

• Sub-bass can sound restrained
• Limited punch and physical bass impact
• Soundstage is fairly intimate
• Some congestion at higher volumes with dense recordings
• Stock memory-wire cable can create fit issues
• Eyeglass wearers may need foam tips or a different cable
• High sensitivity may expose hiss from noisier sources

Our Ratings:

★★★★★★★★★★ Sound Quality

★★★★★★★★★★ Build Quality

★★★★★★★★★★ Comfort (cable/tip issues)

★★★★★★★★★★ Value

Where to Buy:

Related Reading:

Welcome back to TechCrunch Mobility, your hub for the future of transportation and now, more than ever, the role AI is playing in it. To get this in your inbox, sign up here for free — just click TechCrunch Mobility!

Autonomous vehicle technology is not yet ubiquitous or mainstream. Readers here might shout, “It’s everywhere!” but I can tell you that it is not — although I understand why folks in the San Francisco Bay Area might disagree. 

The tech is, however, being commercialized and that transition from testing to commercial product has me thinking about scale. A few strategies are emerging. 

Scale through partnerships. A couple of announcements this week highlighted this strategy. Wayve locked in a commercial partnership with Mercedes-Benz to integrate the startup’s automated driving tech into at least one model set to be deployed within the next two years. This is a Level 2 type product, meaning it handles certain driving maneuvers but still requires the human driver to remain engaged. While this is not a Level 4, or fully driverless product, it gives Wayve reach and follows similar deals with Nissan and Stellantis. Those partnerships have also opened doors for its fully driverless product. Earlier this year, Wayve announced a partnership with Nissan and Uber to launch a robotaxi service in Tokyo. 

Widespread and concentrated, all at once. As I wrote this week, Waymo’s commercial robotaxi ramp-up looks expansive, both in geographic reach and ridership. And by almost every measure, it is — until you pay attention to where the bulk of those robotaxis are actually showing up.

I looked at vehicle registration data and found that, at least for now, Waymo is concentrating its efforts in just two states. About 80% of Waymo’s roughly 4,000 robotaxis are in California and Texas, and Texas is where the action is now: Waymo’s fleet there has grown by more than 49% in the past three weeks.

Waymo is also scaling by seeking out new kinds of users: teenagers.  

I might put Aurora, a company developing and commercializing self-driving trucks, somewhere between these two categories. Aurora is clearly focused on Texas, but it has cast a wide net when it comes to partners. CEO Chris Urmson is also clearly bullish on how the company will scale over the next four years, noting this week that Aurora has “emerged from the building stage.” The company said it’s targeting more than 30,000 driverless trucks in operation by 2030. The company plans to have more than 200 driverless trucks by the end of the year.

A little bird

Our little bird items are typically just that: small yet notable nuggets of insider information from across the transportation industry. But every now and then, a tip turns into something much bigger. 

That’s what happened a few weeks ago, when Zoox workers reached out to senior reporter Sean O’Kane about a problem with the company’s test fleet in Atlanta. Workers were getting sick, and they suspected it was from its test vehicles, Toyota Highlander SUVs equipped with Zoox’s self-driving system.

The TL;DR: Zoox grounded its autonomous vehicle test fleet in Atlanta after safety drivers were potentially exposed to carbon monoxide, carbon dioxide, or hydrogen sulfide gas inside its vehicles last month. Zoox says it only ever found evidence of CO₂ in the vehicles.The repeated incidents led one worker to file a complaint with the Occupational Safety and Health Administration, which opened an inquiry and told Zoox to investigate the exposures.

You can, and should, read the whole story here.

Got a tip for us? Email Kirsten Korosec at kirsten.korosec@techcrunch.com or my Signal at kkorosec.07, or email Sean O’Kane at sean.okane@techcrunch.com.

Deals!

Wall Street may be preoccupied by whether the buzziest AI companies will go public in 2026, but there is other IPO activity in other industries, including transportation. Many of these are companies located outside of the United States. 

For instance, Carro, the used car marketplace backed by SoftBank, is considering dual listing on the Nasdaq and the Singapore Exchange. Two India-based companies — used car marketplace Spinny, which is back by Tiger Global, and electric bus company PMI Electro Mobility Solutions — have both filed confidentially for IPOs. Then there’s EcoCeres, a Hong ​Kong-based company that produces renewable fuels, which reportedly plans to raise about $1 billion ‌in a Hong Kong initial public offering.

And don’t forget just last week the U.S.-based autonomous vehicle company May Mobility said it planned to go public via a merger with a blank-check company. 

Other deals that got my attention …

Ultraviolette, the India-based electric motorcycle manufacturer, raised $85 million and has brought on Intel CEO Lip-Bu Tan as an adviser. Read our previous coverage on Ultraviolette here.

Notable reads and other tidbits

Comma, the startup founded by hacker George Hotz, is facing a federal investigation after five reported crashes involving the company’s aftermarket hands-off driver-assistance tech, two of which resulted in three deaths.

Einride, the Swedish autonomous and electric trucking company, said it plans to use Nvidia’s Hyperion platform to build the next generation of its self-driving system.

San Francisco-based PitPro Automation has developed a robot that can change tires and has now deployed it at a shop in Canada. 

The Boring Company is working on “a simple precursor Hyperloop” between Austin and San Antonio that will reduce the journey between the two cities to less than 30 minutes, according to the tunneling startup’s founder, Elon Musk.

Tesla is finally handing over the first of its all-electric Semi trucks to customers. CEO Elon Musk is known for shaky timelines, but when I attended the Semi reveal event in 2017, I didn’t think it would take nearly a decade. One insider note from reporter Sean O’Kane: “Customers will be able to take delivery of the truck whenever they are ready, though charging infrastructure remains a hurdle.”

Does AI need a learner’s permit? MIT researcher Bryan Reimer, whose work I periodically share here, weighs in.

Volkswagen is reportedly delaying the return of its ID Buzz to the United States. Meanwhile, Volkswagen subsidiary MOIA America has partnered with Beep and is now launching its first passenger services in self-driving ID Buzz vehicles equipped with Mobileye self-driving tech in the Orlando community of Lake Nona. There is still a human operator on board.

One more thing …

We’re a couple of weeks away from Disrupt 2026, TechCrunch’s annual tech conference in San Francisco. I am interviewing Rivian CEO RJ Scaringe onstage October 13, and we have a lot of ground to cover. If you recall, Rivian has some lofty plans for its R2, robotaxis, and automated driving. And then there is Scaringe’s other projects, the spinout Also and Mind Robotics. 

If you’re in San Francisco during Disrupt, you should come. And I’m offering you a 30% discount with code mobility30 by following this link. There are other interesting talks besides Scaringe, plus dozens of startups to check out. Check out the agenda here, which includes talks with folks from startup Bedrock Robotics, GM, and self-driving trucks company Waabi. Les Karpas, Nvidia’s head of physical AI, and Mark Wahlberg will also be there, among many, many others.

President Donald Trump plans to host Anthropic boss Dario Amodei at a private White House dinner on Sunday evening. Maria Curi and Marc Caputo broke the news for Axios, citing people familiar with the matter.

It would be the first one-on-one meeting between the two, according to Axios. TNW has not independently confirmed the dinner.

TNW is owned by Tekpon. Anthropic’s Claude is listed on Tekpon’s marketplace.

Amodei missed last week’s state dinner for Chinese President Xi Jinping, which OpenAI’s Sam Altman and Google’s Sundar Pichai attended, because of a scheduling conflict. Trump then invited him personally to Sunday’s dinner, Axios reported.

On Tuesday, Trump and House Speaker Mike Johnson are due to meet tech CEOs on AI at the White House. Johnson has said the talks will cover the companies’ responsibility to keep AI safe.

Anthropic’s ties with the White House have had ups and downs this year. In April, the White House opposed the company’s plan to widen access to its Mythos model.

In June, after meeting Amodei at the G7 summit, Trump said he no longer saw Anthropic as a national security threat. Even so, some top officials had told Trump not to meet him, Axios reported.

The dinner also comes after Amodei called this month for the whole AI industry to slow down, a call Trump has brushed aside.

“President Trump has been clear: America will lead the world in Super Intelligence, while protecting American consumers,” a White House official told Axios.

A human pancreas typically contains about a billion beta cells, the primary producers of insulin. Among people with diabetes, these cells are either missing or dysfunctional, and thus scientists have been looking for ways to replenish their numbers as a possible long-term treatment or even cure for the condition. A team of researchers recently took a step closer to that reality, genetically altering another type of pancreatic cell to produce and release insulin in response to high blood sugar.

The researchers engineered ductal cells, which—as some previous studies had found—occasionally transform into beta cells all on their own. This is an unusual phenomenon among cells in adult bodies, which tend to be firmly fixed in their identities, and it hinted to the scientists that these ductal cells would be a good place to start.

Scientists previously had no clue what genes were driving this metamorphosis, said Jian Li, a postdoctoral researcher at Harvard Medical School who led the recent study in Science Translational Medicine. The researchers therefore took an approach called a genetic screen, which involves breaking little bits of DNA all across the genome to see which are important for a certain biological process. It’s a bit like individually removing pieces of a car engine without a schematic and seeing what breaks to learn which components are involved in delivering fuel or are essential for steering.

Through this process, the researchers found that taking out a gene called ALDH3B2 turned ductal cells into beta-like cells at a higher rate. Without the genetic alteration, fewer than 1 percent of ductal cells spontaneously took on a beta-cell-like state, but when ALDH3B2 was silenced, that proportion increased to about 8.5 percent.

Those initial experiments were performed on human cells in a dish, which the researchers then transplanted into mice with diabetes. Human insulin began circulating in the mice, and the animals’ glucose levels dropped to near-normal levels. These effects persisted for six weeks.

Science has previously explored some gene therapies for diabetes with the hopes of offering long-term relief. For example, a clinical trial launched earlier this year is taking the creative approach of equipping muscle cells with the genetic instructions to make insulin. Other emerging treatments aim to generate new insulin-producing cells in the laboratory and then transplant them into the patient.

This comes with a few risks, namely activation of the immune system. This new study points to another possibility: harnessing the cells that already exist in the pancreas and causing them to change function by turning off some of the genetic switches that maintain their identity.

That method also has its own hurdles, one of the most important of which is ensuring that only the target cells are edited. ALDH3B2 is used by many cells in the body, not just in the pancreas, so precision is important to prevent unforeseen complications.

There’s also a major lingering question: How is this gene involved in turning ductal cells into beta cells? “That’s the part we need to verify first,” Li said. Then, “the next step is either gene therapy or to find specific small molecules to inhibit this gene to see if we can achieve a similar—or even better—effect.”

Even partial improvement could make a massive impact in the lives of the estimated 830 million people who have diabetes worldwide, including many who die each year due to related complications.

This story originally appeared on WIRED en Español and has been translated from Spanish.

Update: Article rewritten with official confirmation from Citrix.

Citrix has confirmed that two critical NetScaler remote code execution vulnerabilities, tracked as CVE-2026-88771 and CVE-2026-88772, are being exploited in attacks and that it has released security updates to fix the flaws.

The vulnerabilities are the same zero-days that cybersecurity researchers, IT providers, and national cybersecurity agencies began privately warning organizations about over the weekend.

NetScaler appliances are particularly valuable targets because organizations commonly deploy them as Internet-facing edge devices that provide remote access and application delivery services for internal corporate networks.

Compromising one of these devices can give attackers an initial foothold at the perimeter of a victim’s network and potentially provide a path to internal systems without first compromising an endpoint inside the organization.

The first signs of the incident appeared when Citrix administrators began reporting on Reddit that IT suppliers and security teams were privately contacting their organizations and advising them to shut down their NetScaler appliances.

“We got a call from our IT supplier’s security team, they couldn’t give any details but they advised to shut our Netscalers down immediately,” one administrator wrote.

Other administrators said law enforcement, CERTs, and national cybersecurity agencies had also been contacting organizations about the issue.

Cybersecurity firm watchTowr later publicly warned that it was “rapidly reacting to rumors” that multiple unpatched Citrix NetScaler remote code execution vulnerabilities were being exploited in the wild after verifying the information with “authoratitive sources.”

“We are currently rapidly reacting to rumors that multiple unpatched Citrix NetScaler RCE vulnerabilities are circulating in the wild. While details are scarce, the information is credible,” watchTowr said.

Citrix confirms active exploitation

Citrix has now published security bulletin CTX697096, confirming the vulnerabilities and releasing patches for affected NetScaler ADC and NetScaler Gateway appliances.

CVE-2026-88771 is a remote code execution vulnerability caused by improper input validation, allowing an unauthenticated attacker to execute arbitrary commands. It has a severity score of 9.5.

Citrix says the flaw affects all NetScaler ADC and NetScaler Gateway deployments, including those using the default configuration, and does not require any additional feature to be enabled.

CVE-2026-88772 is a memory overflow vulnerability that can lead to remote code execution or a denial-of-service condition, also with a severity score of 9.5.

This vulnerability can be exploited when DTLS is enabled on a NetScaler ADC or NetScaler Gateway. Citrix notes that DTLS is enabled by default on VPN virtual servers.

Citrix has confirmed that both flaws have been exploited in attacks against NetScaler devices as zero-days.

“Exploits of CVE-2026-88771 and CVE-2026-88772 on unmitigated NetScaler deployments have been observed,” Citrix said in the security bulletin.

Citrix says the following versions are affected:

• NetScaler ADC and NetScaler Gateway 14.1 before 14.1-73.37
• NetScaler ADC and NetScaler Gateway 13.1 before 13.1-64.23
• NetScaler ADC FIPS before 14.1-73.37 FIPS
• NetScaler ADC FIPS and NDcPP before 13.1-37.279

Secure Private Access Hybrid deployments using NetScaler instances are also affected and must be upgraded to the recommended builds.

Citrix says the bulletin only applies to customer-managed NetScaler ADC and NetScaler Gateway appliances. Cloud Software Group is upgrading Citrix-managed cloud services and Citrix-managed Adaptive Authentication.

The security bulletin also fixes six other NetScaler vulnerabilities, bringing the total to eight flaws fixed in this update.

NCSC warned organizations before disclosure

Before Citrix publicly disclosed the vulnerabilities, the Dutch National Cyber Security Center (NCSC-NL) reportedly sent a pre-notification to organizations in the Netherlands warning about two critical NetScaler zero-days.

Multiple people shared copies of the notification online, which said the agency had received information from a European partner CERT regarding two vulnerabilities that could independently lead to remote code execution.

According to the notice, one vulnerability allowed attackers to place shellcode directly into memory, while technical details about the second vulnerability were still being researched.

At the time, no CVE identifiers had been assigned, and Citrix had not yet published an advisory.

The notification said Citrix discovered the vulnerabilities while investigating incidents in customer environments and identified active exploitation.

It also said Citrix submitted a notification under the European Union’s Cyber Resilience Act after discovering the attacks.

The NCSC said exploitation had been identified at multiple Citrix customers worldwide, although it did not know whether the attacks were widespread.

The agency also warned that exploitation attempts could increase once Citrix released patches and additional technical details.

Because NetScaler upgrades can cause downtime, the NCSC said the warning was intended to give organizations time to prepare, implement safeguards where possible, and install patches quickly once they became available.

BleepingComputer contacted the Dutch NCSC to confirm whether the advisory circulating online was legitimate.

The agency declined to confirm the notification, saying it could not provide further information to organizations outside its constituency.

“As part of our role as the National CSIRT and sectoral CSIRT for designated organizations, the NCSC-NL monitors relevant developments and cyber threats affecting the Netherlands 24/7,” the NCSC-NL told BleepingComputer.

“We provide information and advice to organizations so that they can take appropriate measures. As you’re not part of our constituency, we cannot disclose any further information at this time.”

Now that Citrix has released fixes and confirmed exploitation, administrators should upgrade affected NetScaler ADC and NetScaler Gateway appliances to the patched versions as soon as possible.

Organizations that cannot apply the updates immediately should reduce Internet exposure where operationally possible until they can patch the appliances.

Join Mikko Hyppönen and security leaders from the NFL, CHANEL, and Atlassian for a two-hour digital summit on what AI-speed attacks change, what defenders should stop doing, and how to validate, decide, fix, and re-validate at machine speed.

Save your seat

Scott Manley teaches orbital mechanics through Kerbal Space Program, and he also DJs. For his latest project, he wired those two lives together on a whim, writing a small Python program that reads MIDI events from a portable mixer and turns them into spacecraft commands. The question he set out to answer was simple enough to print in all caps: can you fly a spaceship using a DJ mixer? After one messy airplane test and one surprisingly clean lunar landing, the answer was yes.

A Numark DJ2Go2 is at the core of this operation, but in a very small way, as this 2-channel USB controller is small enough to carry in a backpack. Oh, and it runs totally on MIDI, so no power issues there. Manley needed to complete a task, so he began mapping inputs that were never intended for pitch or yaw to do so, among other things. He did it all through a config file, which allowed him to adjust the dead zones and response curves without having to start over. As a result, Kerbal’s kRPC remote control interface could accept the translated commands and send them to the 2015 simulator. Throttle originated from a slider on the speed dial that, if yanked the wrong direction, does the opposite of what you’d expect. The attitude was taken care of by the little self-centering sticks and the jog wheels, which always seem like you’re playing with a vinyl record when you only need a few degrees of pitch, such as when you’re descending. Finally, buttons were utilized to control staging, SAS modes, RCS, landing gear, and action groups.

Estes 1469 Tandem X Rocket-Building Kit, Beginner Flying-Rocket Model Kit for Ages 10+, Includes Launch…

• BEGINNER MODEL-ROCKET LAUNCH SET: The Tandem-X rocket-model launch set offers adults and kids ages 10+ hours of fun during the holidays as they…
• 2 SOARING ALTITUDE HEIGHTS: Our Tandem X set offers a high-performing power duo with our giant 30-inch Amazon model (600-foot projected altitude with…
• READY TO ASSEMBLE: Our beginner model-rocket launch set comes with 2 build options. The precolored Amazon model features plastic fins and self-stick…

First up was a plane, and it was a close call because the plane almost won, but Manley quickly discovered that the rotation on the mixer was far too delicate when close to the ground. He nearly crashed the plane into the trees by over-correcting, then spent far too much time battling the camera before eventually figuring it out. At that point, he stopped treating the board as a flight stick and began treating it as a collection of poorly labeled sliders. He described the learning curve as steep and the configuration as unsuitable for low-altitude flight. SAS modes that propel a rocket into space are ineffective when flying a winged plane that follows the terrain. That particular flight landed on the runway due to sheer chance and early saves, rather than design.

When it came to rockets, it was a very different situation. Manley fired one, kept a steady path with the jog wheels, and then let the SAS handle the ride through the first stage burn. It wasn’t until he was climbing that things became a little unstable, and he had to cut the thrust to save the thing from frying itself, before staging, restarting, and sending it on its way. After a few minutes, they were in a 100-kilometer circular orbit, with no drama. From there, he focused on the Mun, decreased the orbit’s lowest point, and began a drop toward a good, smooth crater that would be far superior than the surrounding ridges for landings. Then it was simply a matter of directing it down to the ground with the jog wheels until the lander tipped in and landed on the soil.

Time acceleration was a continual battle for him because a poorly mapped reset caused the clock to spool back and added some annoying visual artifacts, so he saved frequently and flew the coast phases in real time more than he wanted to. Don’t even get started on the radar altitude, which never seemed to appear on the board, thus the last hover was a bit of a gamble, relying on camera zooms and enough practice to overcome the homing inaccuracy. The familiar layout of staging buttons and SAS modes, however, came readily to him, as it was similar to thinking about mixing tracks as a DJ, with distinct cues and a continuous fader. The problem was that planes required a continual stream of micro corrections right near the ground, and rockets provided him with extended burn periods and some nice staging events, but he needed a computer that could at least retain its position while he mixed it all together.
[Source]

A council in north Devon backed a huge AI datacentre plan more than a year before the public knew about it. The documents were reported by Sandra Laville for the Guardian.

Campaigners got the papers through freedom of information requests. They show the developer, Xlinks, had been in private talks with Torridge district council since March 2025. The council sent a letter of support in April 2025, before any environmental study or public consultation.

The council told the Guardian that such early talks are standard and confidential, and do not mean a proposal has been approved.

Xlinks plans a 1.5GW AI data campus and a 1.8GW battery storage site on about 344 hectares near Great Torrington, in a Unesco biosphere reserve. The company puts the cost at up to £13.8bn and says the site will create 600 to 1,200 permanent jobs.

Local campaigners point to the protected countryside, the loss of farmland, water use, noise and fire risks from the batteries. North Devon is also still under a hosepipe ban after a record hot summer.

One document showed that in severe heat and drought, the site could use about 2.9bn litres of water a year. However, Xlinks told the Guardian that figure came from an old design, and that the campus will mainly reuse water and top up from rain.

“How can the largest and most costly infrastructure proposal in the nation be conducted almost exclusively in secret?” said Emily Clark of the Devon Datacentre and BESS action group.

Meanwhile, a national petition started by Devon county councillor Cheryl Cottle-Hunkin has passed 36,000 signatures. It calls for a pause on datacentres and battery sites outside the government’s AI growth zones.

The government rejected the idea on 17 September. It said such projects already face planning and environmental checks, and that battery storage is needed to clean up the power grid by 2030.

Xlinks said it will design the campus with care for local people and nature. A public consultation planned for July has been put back to later this year, the council said.

The fight in Devon follows a wave of datacentre protests in the US, where local groups blocked $130bn of projects in the first three months of this year.

What we know so far: World’s Edge, the Microsoft studio that oversees the Age of Empires franchise, has lost nearly half its staff in the latest round of Xbox layoffs. The cuts coincided with Microsoft’s decision to place the studio under Activision. Former employees also said the studio’s next project was canceled during the transition. The moves raise questions about World’s Edge’s future role and the direction of Age of Empires under Activision.

“Our studio was reorganized to be under the Activision umbrella,” former senior software engineer Andrew Martz said in a LinkedIn post. “As part of that reorg, our next project was canceled and a large chunk of our studio was laid off. I was part of that layoff.”

The layoffs are part of 268 job cuts across Microsoft’s Xbox business. They contribute to the company’s projected target of 3,200 job losses during the current financial year.

World’s Edge has played a different role from a conventional game-development studio. It has overseen the Age of Empires brand and worked with outside developers on new releases, expansions and ports. That setup has allowed Microsoft to maintain several games in the series at once, including remasters of older titles and newer releases for consoles.

– Pirat_Nation 🔴 (@Pirat_Nation) September 22, 2026

Relic Entertainment, for example, was the main developer of Age of Empires IV. World’s Edge helped guide the project as the franchise’s steward. Age of Empires IV arrived on PC in 2021 before later coming to Xbox and PlayStation.

The layoffs mean it’s unclear what happens next for the franchise. Microsoft has not detailed World’s Edge’s plans under Activision or said what the canceled project was. It is also unclear how much of the studio’s work will remain focused on Age of Empires.

Adam Isgreen, World’s Edge’s former studio creative director, said many longtime employees were affected. Isgreen had spent 16 years working on Age of Empires, including his time at World’s Edge.

“I am of course disappointed that this is the way the time with World’s Edge and Age ends for myself and many of my talented teammates that were also impacted – we had some great plans for what’s next,” Isgreen wrote. “I hope the team that remains can rise to the occasion down the line.”

The Age of Empires series has continued to expand beyond its original PC audience. Modern releases have had to support online multiplayer, regular updates, console controls and different hardware platforms, while maintaining the core systems that define the games: resource gathering, base building, large-scale unit control and civilization-specific strategies.

That work is spread across several teams and partners. World’s Edge has been responsible for keeping the franchise’s games and content aligned, even when another studio handled most of the development. A smaller staff could make that job more difficult, especially if Microsoft plans to pursue another major entry in the series.

The reduction comes as new Age of Empires content continues to arrive. Viking Sagas, the latest downloadable expansion for Age of Empires II: Definitive Edition, just launched. It adds three civilizations and 15 single-player campaign scenarios.

Another former World’s Edge employee, lead principal software engineer Greg Snook, said he was informed of his departure while on vacation.

“‘It was nice working with you’ was not a message I expected to get while on vacation,” Snook wrote. “Like many others, I was cut loose from Microsoft today. Turns out my last day with building access is also my exact 25-year hire anniversary.”

For now, the fate of World’s Edge under Activision remains uncertain. The studio still has a major franchise attached to it, but the layoffs and project cancellation suggest its role inside Microsoft’s gaming organization has changed significantly.

The EU’s special envoy for industrial AI has told the EU’s top officials to focus on using AI to lift Europe’s slow productivity. Racing to build the best models matters less, he told them. Zoya Sheftalovich reported the story for Politico.

Jim Hagemann Snabe gave the message to the 27 commissioners at a private seminar on 4 September, two Commission officials told Politico. He said AI could help health, farming, transport, defence and factories.

A week earlier, a Commission AI expert gave a similar briefing to the commissioners’ heads of cabinet. The US and China may lead on models and computing power, but Europe can still gain by putting AI to use, according to slides seen by Politico.

The slides gave examples such as easier testing rules for self-driving cars, secure data spaces for personalised medicine and a digital adviser for farmers.

Commission President Ursula von der Leyen made a similar point in her State of the Union speech on 16 September. She said Europe does not need to build frontier AI to get the most value from it.

Snabe, who chairs the supervisory board of Siemens, was appointed in June to advise von der Leyen and tech chief Henna Virkkunen. His appointment drew conflict-of-interest criticism at the time.

A Commission spokesperson, Thomas Regnier, told Politico the talk was about how Europe can get firms to use AI faster.

However, not everyone backs this plan. German MEP Axel Voss said the Commission was too slow to enforce its AI law, and pointed to recent hacks by AI agents, Politico reported.

Others want Europe to build more of its own AI capacity. Earlier this month, former commissioner Margrethe Vestager and economist Philippe Aghion called for Europe to hold 15% of global compute by 2030.

Snabe’s team will study how each sector can use AI until December, then draft new policies near the end of the year, according to Politico. A final report and strategy are expected in early 2027.

Amazon’s next big sale is still a little over a week away, with Prime Big Deal Days officially running on October 6 and 7. Even then, there are still plenty of Bluetooth speaker deals available for the early buyers, and a few of them are already considerably better than I expected.

I went through the early discounts and narrowed them down to five speakers I’d pay attention to right now. There’s a tiny JBL for less than $40, a Flip 7 sitting well below $100, and options from Bose, Ultimate Ears, and Marshall if you have a little more room in the budget.

Note: Amazon prices and discounts can change quickly and may differ between colors.

JBL Go 5 — $39.95 (27% off)

The JBL Go 5 is the easiest recommendation here if all you really want is a small speaker that can disappear into a backpack. Amazon has it at $39.95, which takes $15 off its $54.95 price. It is tiny at just 0.51 pounds, yet JBL still gives it an IP68 rating for dust and water resistance. Battery life reaches eight hours, with Playtime Boost squeezing another two hours out of it, and the Go 5 also supports Auracast if you eventually want to connect compatible speakers together.

JBL even added ambient edge lighting this generation, which is one of the upgrades over its predecessors At under $40, this is the one I’d throw into a bag for a trip, keep around the bathroom, or take somewhere I wouldn’t necessarily want to risk a more expensive speaker.

Ultimate Ears Wonderboom 4 — $51.44 (49% off)

Spending another $11 gets you something bigger. The blue Ultimate Ears Wonderboom 4 has dropped to $51.44 on Amazon, which is one of the better discounts in this entire list. Amazon commonly sells it below its $99.99 MSRP, yet $51.44 remains an unusually low price and sits only a couple of dollars above its previous Prime Day low.

I also like how it’s built for outdoor use with an IP67 rating. It can even float if it falls into water and survive drops from up to five feet. You get up to 14 hours of audio playback on a single full charge. Its 360-degree design makes placement fairly painless, while Outdoor Boost changes the tuning for open spaces and Podcast Mode focuses more heavily on voices. For just over $50, there’s a lot going on here.

Marshall Emberton III — $144 (20% off)

Marshall goes in a different direction from the utilitarian JBL and Bose designs, and the Emberton III is easily the speaker I’d pick if I cared about how the thing looked sitting on a desk or shelf. The Black/Silver Amazon listing has recently hovered around $144, putting it roughly $36 below Marshall’s $179.99 price.

The bigger reason I’d spend the extra money is battery life. Marshall claims more than 32 hours from a charge, comfortably the longest figure among these five speakers, and a 20-minute quick charge can add another six hours. The Emberton III also has an IP67 rating, Bluetooth 5.3 LE, a built-in microphone for calls, and Marshall’s True Stereophonic multidirectional sound. Two 2-inch 10W full-range drivers sit inside, accompanied by passive radiators.

It is the most expensive pick here. Still, the combination of battery life, ruggedness, and that iconic Marshall design gives it a clear place in this list.

JBL Flip 7 — $119.95 (20% off)

For those looking for a bigger JBL portable speakers, the Flip 7 is the perfect pick. It’s compact enough to carry around without becoming luggage, while giving you considerably more speaker than the tiny Go 5. Amazon currently has the black model at $119.95. JBL rates the Flip 7 for up to 16 hours of playback with Playtime Boost, alongside an IP68 rating that covers water and dust resistance. It is also drop-proof from up to one meter. The newer PushLock system lets you attach interchangeable carrying accessories, and USB-C supports lossless audio when connected to a compatible source.

This makes the Flip 7 the safest all-rounder of these five for me. It has enough battery life and durability for travel, enough output to make sense outdoors, and still occupies very little room in a backpack. At around $120, it sits nicely between the cheaper compact speakers and the more style-driven Marshall.

Beats Pill — $99.95 (33% off)

The Beats Pill has been around in one form or another for years, and the 2024 revival is currently available for under $100. It is currently listed on Amazon as a limited-time deal, with the price sitting at $99.95. Beats claims up to 24 hours from a charge, placing the Pill well ahead of both JBL models above. The USB-C port is useful in both directions too. You can use it for high-resolution lossless audio with a compatible wired source or pull power from the speaker to charge your phone.

Beats also gave the Pill an IP67 rating, a removable lanyard, Apple and Android one-touch pairing, Find My support, and the ability to pair two speakers together in Amplify or Stereo modes. There’s even a microphone for calls and voice assistants. Beats also gave the Pill an IP67 rating, a removable lanyard, Apple and Android one-touch pairing, Find My support, and the ability to pair two speakers together in Amplify or Stereo modes. There’s even a microphone for calls and voice assistants.