Connect with us
DAPA Banner
DAPA Coin
DAPA
COIN PAYMENT ASSET
PRIVACY · BLOCKDAG · HOMOMORPHIC ENCRYPTION · RUST
ElGamal Encrypted MINE DAPA
🚫 GENESIS SOLD OUT
DAPAPAY COMING

Tech

Trump Administration Allows Anthropic to Release Mythos to Select US Organizations

Published

on

The US government has eased the restrictions it imposed on Anthropic’s most advanced AI model, Claude Mythos 5, allowing the company to grant access to more than 100 US organizations, including large corporations and government agencies.

In a letter sent to Anthropic’s cofounder and chief compute officer Tom Brown obtained by WIRED, US Commerce Secretary Howard Lutnick told the AI lab it would permit certain trusted partners to access Mythos because he had “determined that appropriate safeguards are in place.” Semafor first reported the existence of the letter.

“Anthropic has worked with the U.S. government to address risks associated with the Covered Models. These efforts have yielded significant progress,” Lutnick wrote.

However, the government stopped short of permitting a broader rollout of the model, and said nothing about the fate of Claude Fable 5, the consumer-facing version of Mythos that Anthropic released with significant additional safeguards. Lutnick noted in his letter that the other requirements outlined in the initial directive he sent on June 12 remain in effect.

Advertisement

“We received notice from the US government that Mythos 5, our strongest cybersecurity model, can be redeployed to a small group of cyber defenders and infrastructure providers,” Anthropic spokesperson Eduardo Maia Silva said in a statement to WIRED. “We are working to provision the approved set of providers and restore their access to Mythos 5 as quickly as possible. We are pleased to see this progress and continue to work with the government to expand access to Mythos 5 and make Fable 5 available for general use again.”

Anthropic is still in discussions with the White House about restoring access to Fable 5, and they are expected to continue over the weekend, according to a person familiar with the matter. Both parties are hopeful the resolution of this incident will help inform a lasting policy framework for future model releases, the person said.

The partial reinstatement comes roughly two weeks after the White House sent an export control directive to Anthropic that required the company to limit foreign nationals from accessing Mythos and Fable 5, including people working and living in the United States. In response, Anthropic disabled access to the models entirely. In his latest letter, Lutnick wrote that organizations approved to use Mythos may now allow their foreign national employees to access the model, and Anthropic may do the same for its own foreign national employees.

The Trump administration grew concerned about Anthropic’s rollout of Mythos after it learned the company granted access to a South Korean telecommunications firm it believed had ties to China, WIRED previously reported. Amazon and the National Security Agency also separately raised concerns to the White House that Fable 5 could be jailbroken, and the confluence of events convinced officials they needed to take action.

Advertisement

In recent weeks, Anthropic sent senior members from its cybersecurity and AI safety teams to Washington, DC to meet with Trump administration officials. Along with Brown, Anthropic’s public policy chief Sarah Heck have been leading the company’s discussions with the US Department of Commerce.

Getting Mythos 5 back online marks a promising step forward for Anthropic and the White House, but the saga has raised broader questions about the overall direction of US AI policy, particularly the extent to which the Trump administration will seek to control future model releases. On Friday, OpenAI announced it was delaying the release of its upcoming GPT 5.6 models in response to a request from the Trump administration.

Source link

Advertisement
Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

This iPod Classic Mod Kit Makes Modern Upgrades Feel Almost Effortless

Published

on

iPod Classic Mod Kit Modern Upgrade
Old iPod Classics still draw people in with their click wheel, physical buttons, and the simple joy of a dedicated music player that never pushes notifications or drains itself on background apps. The hardware holds up surprisingly well decades later, yet the original design shows its age in daily use. Proprietary cables, failing hard drives, and no easy way to connect wireless headphones turn what should feel timeless into something that requires workarounds.



Tito from Macho Nacho Productions embarks on an ambitious quest to make a completely upgraded 5th Generation iPod Classic using the Moonlit Market Classic Connect 2 kit, and he takes us through every step of the process. The final product appears to be straight out of the past, with its vintage interface and respectable sound signature, but then you realize all of the modern technologies that have been added, such as Bluetooth, USB-C, wireless charging, haptic feedback, and a larger battery. What stands out is how simple this build is in comparison to past custom projects. The kit is mostly assembled, making life much easier. It contains a frosted translucent replacement back shell pre-fitted with the larger battery, wireless charging coil, and main board that handles Bluetooth 5.2 and the haptic motor, as well as a tube of B7000 glue to finish the process. Tito uses it with an iM Cory SD card converter board and a microSD card for storage, discarding the old spinning hard drive because it will not fit with the new one.

iPod Classic Mod Kit Modern Upgrade
Opening the iPod requires some pressure from tiny plastic tools to remove the front and back parts without harming the plastic. Tito disconnects the battery and drive connections before removing the old hard drive. He swiftly cuts the small plastic clip above the screen to create space for the new board. The SD adapter is then inserted into the drive bay and connected to its own ribbon.

iPod Classic Mod Kit Modern Upgrade
The Moonlit board is then attached to the iPod’s main circuit board with a few extra connections. Tito gives it a quick test run before using the B7000 adhesive to keep everything together. He runs into a couple of minor snags along the way, both of which are easily fixed, as he replaces his microSD card with one that the adapter prefers and fixes a dead ribbon on the haptic feedback by reseating the connection and reactivating the vibration motor. These little obstacles highlight how straightforward this method is, as no soldering or specialized electronics knowledge is necessary.

iPod Classic Mod Kit Modern Upgrade
When the adhesive has entirely cured, the finished player feels complete. Bluetooth connectivity works easily with any AirPods or existing headphones, and higher-quality codecs do an outstanding job of preserving fine sound detail, which is frequently lost with basic wireless connections. The USB-C connector supports both charging and file transfers via a single interface, eliminating the need for cords.

iPod Classic Mod Kit Modern Upgrade
Even better, you can just place it on a wireless charging pad and it will charge automatically. The haptic feedback adds a pleasant light touch to each click wheel turn and button press, offering some of the tactile input that the original mechanical design did. The new battery cell hidden beneath the new shell delivers much longer runtime. Tito compares the finished product to the Boxy Pixel aluminum-and-glass kit he showed in an earlier video. The Moonlit option foregoes the luxury machining in favor of a much simpler installation and a few more functions from the start, such as wireless charging and haptics. The translucent frosted surface gives the player a unique appearance while yet feeling like an iPod and not an entirely other device.

Source link

Advertisement
Continue Reading

Tech

Whoops! Military Reverses Course On Flu Vaccine Requirements After Soldiers Got Sick

Published

on

When we talk about the scourge of anti-vaxxer philosophy within the federal government, we naturally spend a great deal of that time talking about RFK Jr. He’s the Secretary of Health and Human Services and perhaps the most infamous anti-vaxxer on the planet, after all. But if you thought HHS was the only part of the government infected with this dangerous unscientific nonsense, you’d be wrong.

In April of this year, Pete Hegseth, Secretary of Whatever-We’re-Calling-It-Today, rescinded a requirement for America’s fighting forces to be inoculated against influenza. Why? Well, because it just wasn’t necessary, you see. Also, freedom. Probably bald eagles. Perhaps apple pie and baseball are involved. It’s really anyone’s guess these days. Hegseth stated the following publicly on his decision:

“The notion that a flu vaccine must be mandatory for every service member, everywhere, in every circumstance, at all times, is just overly broad and not rational,” the secretary said. “Our new policy is simple: If you, an American warrior entrusted to defend this nation, believe that the flu vaccine is in your best interest, then you are free to take it; you should. But we will not force you.”

“Our men and women in uniform were forced to choose between their conscience and their country, even when those decisions posed no threat to our military readiness,” Hegseth said. “That era of betrayal is over. Under President [Donald J.] Trump, the War Department continues to take decisive action to once again restore freedom and strength to our joint force. We’re seizing this moment to discard any absurd overreaching mandates that only weaken our warfighting capabilities.

So, to summarize, the requirement that soldiers be vaccinated against influenza was as follows:

Advertisement
  1. Broad and irrational
  2. A betrayal
  3. An absurd and overreaching mandate
  4. Weakened our fighting forces
  5. Would be ended and soldiers would no longer be forced to be vaccinated

I assume that analysis still holds, other than the last, now that the military is once again mandating the flu vaccine for its soldiers because, and this will shock you, a bunch of soldiers got sick.

The Army, Navy, and Air Force are once again requiring basic trainees to get vaccinated against influenza after the virus quickly swept through an Air Force base in Texas, sickening at least 222 recruits and hospitalizing four. Last week, news broke of a flu outbreak sweeping through Lackland Air Force Base, part of Joint Base San Antonio in Texas. Two unnamed sources told ABC News that the situation at the base has been worsening.

In addition to the 222 cases and four hospitalizations reported as of Tuesday, one recruit, Keon McDaniel, died. McDaniel was in his sixth week of basic training and suffered a medical emergency on June 12. It’s unclear if his death was related to the outbreak.

ABC News reported that sources think only about 40 percent of the new Air Force trainees at the base were vaccinated and that the outbreak began in early June.

So, according to Hegseth himself mere months ago, sixty percent of the new Air Force trainees at the base are going to be subject to a broad, irrational, absurd, freedom-stealing betrayal mandate to get the flu vaccine? Cool.

It’s absolutely incredible just how shallow the anti-vaxxer mentality can be. Freedom, I am told, is worth fighting and dying for. If a flu vaccine mandate is anti-freedom, why are we letting some illnesses and potential deaths cause us to take actions that are anti-freedom?

Advertisement

The answer is because it isn’t about freedom at all. It’s about placating the dumbest corners of our society just because they happen to be a voting bloc aligned with Donald Trump, a man not exactly known for his incredible good health and fitness.

Pentagon spokesperson Sean Parnell said that the Pentagon had granted exceptions to Hegseth’s optional flu shot policy to the Army, Navy, Air Force, National Security Agency, and the Defense Health Agency. The exceptions came after a “comprehensive review” and are in line with a standard policy of “adapting force health protection measures to critical operational realities.”

“The decisions were based upon thorough risk assessments and are designed to maximize operational readiness, lethality, and force generation, while safeguarding at-risk populations,” Parnell said.

And that’s any different than the situation three months ago, exactly?

It’s not different at all, of course. Pete Hegseth directly, and of his own accord, managed to get hundreds of soldiers sick, at a minimum. He reduced our war-fighting readiness as a result. And he reversed course the moment the inevitable outcome reared its ugly, feverish, coughing head.

Advertisement

Vaccine mandates are bad when its politically advantageous to say they are, but good when you’re in charge and need to prepare for an invasion of Cuba, or who knows where else.

Filed Under: air force, anti-vaxxers, flu, flu vaccine, pete hegseth, vaccines

Source link

Advertisement
Continue Reading

Tech

LastPass Says Hackers Stole Customer Support Case Data During Klue Breach

Published

on

LastPass says hackers stole customers’ personal information, support case records, and sales data by breaching market research partner Klue. The password manager told TechCrunch that its own systems and password vaults were unaffected. However, the hackers used their access to obtain “reams of data about LastPass customers,” the report says. From the report: In a blog post that shared information about the incident, LastPass said the hackers took customers’ names, phone numbers, email addresses, and physical addresses, as well as customer support case data and sales-related data. It’s not yet known what was in the contents of customer support tickets, although they likely contain fragments of potentially private or sensitive information. Customers typically contact customer service when they are having a billing issue or need assistance in gaining access to their accounts. Past incidents involving customer support tickets have included credentials and government-issued identity documents. The last data breach LastPass reported was in 2022, when hackers stole the company’s entire store of customer password vaults.

Source link

Continue Reading

Tech

OpenAI poaches Uber India chief to lead its biggest market outside the US

Published

on

OpenAI is making yet another big, visible bet on India. It has appointed former Uber India and South Asia president Prabhjeet Singh as its first managing director for the country to scale its presence in what it has called its second-largest market after the U.S.

Singh, who announced his resignation from Uber on Friday, will join OpenAI in September and report to Kiran Mani, the company’s managing director for Asia Pacific, the company told TechCrunch. He will be responsible for OpenAI’s performance in India across consumer growth, enterprise adoption, partnerships, regulatory engagement, and operations, the company said.

The hire marks OpenAI’s latest investment in India. The company opened its first office in New Delhi last August and earlier this year said it would establish new offices in Mumbai and Bengaluru. In 2024, it hired former Truecaller and Meta executive Pragya Misra to lead public policy and partnerships before expanding her role to head of strategy and global affairs last year. OpenAI had earlier brought on former Twitter India head Rishi Jaitly as a senior adviser to help establish its engagement with the Indian government on AI policy.

Over the past few months, OpenAI struck partnerships in the nation spanning higher education, enterprise payments, AI-powered commerce, and web streaming, while also becoming part of the country’s growing data center build-out. OpenAI has pointed to India’s rapidly growing adoption of ChatGPT as a sign of the market’s importance. Indian conglomerates Reliance and Tata Group are also among its early partners in the market.

Advertisement

The company has simultaneously ramped up hiring in India, with openings including AI deployment engineers, developer experience engineers, a developer marketing lead, a partner director, and solutions engineers.

India has emerged as one of the key battlegrounds for U.S. AI companies, driven by its vast developer base, more than a billion internet users, and surging demand for generative AI. Rival Anthropic opened its India office in Bengaluru in late 2025 and earlier this year named former Microsoft India managing director Irina Ghose as its India head.

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

Source link

Advertisement
Continue Reading

Tech

Emotiva XSP-2 Preamplifier Debuts with Balanced ESS DAC and Modular Streaming Upgrade Path

Published

on

Emotiva has built its reputation on delivering high-performance audio components with solid engineering, serious build quality, and prices that usually make the competition look a little too comfortable.

For 2026, the company is taking another run at the serious two-channel market with the XSP-2 Differential Reference Stereo Preamplifier, a major update to the well-regarded XSP-1 that first arrived in 2013. The new XSP-2 keeps the separates-first mindset intact, but adds a more modern modular platform, including a fully balanced ESS-based DAC module installed from the factory and an expansion path for a future streaming module.

The XSP-2 ships with a pre-installed DAC module that expands its connectivity with HDMI-ARC, USB-C, two coaxial inputs, and two optical inputs. Dedicated shielding keeps the digital section isolated from the preamplifier’s pure analog signal path.

The XSP-2’s fully balanced, fully differential analog signal path is designed to lower noise, reject interference, and preserve low-level detail. It also includes fully balanced bass management for 2.1 or 2.2-channel systems, with independent high-pass and low-pass crossover settings at 40, 60, 80, or 100 Hz, plus stereo or summed mono subwoofer output options.

Advertisement
emotiva-xsp-2-back

The XSP-2 also includes an onboard MM/MC phono section for easy connection to most turntables, along with a dedicated headphone output driven by a current-mode feedback amplifier designed to handle more demanding headphone loads.

All audio switching is handled by fourth-generation hermetically sealed subminiature relays, helping preserve signal purity throughout the audio path while reducing noise, crosstalk, and switching artifacts.

An external processor loop and Home Theater Bypass provide additional flexibility, allowing the XSP-2 to integrate more easily into mixed two-channel and home theater systems.

emotiva-xsp-2-low-pass-filter

The front panel features a large blue OLED display, which is larger than the display used on its predecessor, along with a flexible menu system that can be controlled from the front panel or the included remote. The display is easy to read, and the menu system provides quick access to the XSP-2’s core setup and control features such as MM/MC cartridge select, balance, high pass filter, low pass filter, and selectring subwoofer mono/stereo choices.

The XSP-1 is one of the most popular products in the history of the brand,” says Dan Laufman, President, Emotiva Audio Corporation. “It’s famous for being a highly flexible preamp that performs well above its price…After years of focused R&D, we’re finally ready to launch a worthy successor that retains the sonic benefits that made the original a hit, but with added flexibility across the board…The XSP-2 is not only a best-in-class preamp for today’s consumers, but it’s also ready for whatever comes next, including a streamer module that is currently in the works. When it launches, all it will take is a few easy steps to add it to the XSP-2.

Advertisement

Comparison

emotiva-xsp-2-xsp-1
Emotiva Model XSP-2 (2026) XSP-1 (2013)
Price $1,599 $999
Product Type Preampllifier Preampllifier
Number of Channels 2 2
Analog Inputs 4 pairs – unbalanced RCA inputs

2 pairs – balanced XLR inputs

1 pair – unbalanced RCA Processor Loop Inputs

1 pair – MC/MM phono input (switchable)

1 set (L/R/sub) – unbalanced (RCA) HT Bypass Inputs

Advertisement

1 set (L/R/sub) – balanced (XLR) Bypass Inputs

4 pairs – unbalanced RCA inputs

2 pairs – balanced XLR inputs

1 pair – unbalanced RCA Processor Loop Inputs

Advertisement

1 pair – MC/MM phono input (switchable)

1 set (L/R/sub) – unbalanced (RCA) HT Bypass Inputs

1 set (L/R/sub) – balanced (XLR) Bypass Inputs

Digital Inputs 1 – HDMI-ARC Input
Advertisement

1 – digital USB (DAC Input); stereo; supports up to 24/768k, DoP up to DoP256, and native DSD up to DSD512

2 – digital coax (S/PDIF) Inputs; stereo; support up to 24/192k

2 – digital optical (Toslink) Inputs; stereo; support up to 24/192k

Audio Outputs 1 pair – stereo line level balanced (XLR) Left and Right Main Outputs
Advertisement

1 pair – stereo line level unbalanced (RCA) Left and Right Main Outputs

1 pair – stereo line level balanced (XLR) Left and Right Subwoofer Outputs

1 pair – stereo line level unbalanced (RCA) Left and Right Subwoofer Outputs

1 pair – stereo unbalanced (RCA) Processor Loop Outputs

Advertisement

1 x Headphone; 1/4” stereo jack (front panel).

1 pair – stereo line level balanced (XLR) Left and Right Main Outputs

1 pair – stereo line level unbalanced (RCA) Left and Right Main Outputs

1 pair – stereo line level balanced (XLR) Left and Right Subwoofer Outputs

Advertisement

1 pair – stereo line level unbalanced (RCA) Left and Right Subwoofer Outputs

1 pair – stereo unbalanced (RCA) Processor Loop Outputs

1 x Headphone; 1/8” stereo jack (front panel).

Control Inputs and Outputs 1 – 12 VDC Trigger Output – delivers a 12VDC trigger signal when the unit is on
Advertisement

1 – Trigger Input – accepts inputs between 5V and 12V AC or DC

1 – IR input; wired; accepts standard “passive IR eye.”

Note: The XSP-2 will work with a variety of passive 3-wire IR sensors

1 x Trigger input and output: 
Advertisement

1 x IR input and output

Remote Control Yes Yes
Analog Audio Performance (Line Level Inputs) Maximum output level; balanced (XLR) is 8VRMS, and unbalanced (RCA) is 4 VRMS

Frequency response: 20 Hz to 20 kHz +0 / -0.1 dB

Frequency response: 5 Hz to 80 kHz +0 / -2.7 dB

Advertisement

THD+noise; 1 kHz; A-weighted: <0.0005%

S/N ratio; balanced (XLR); A-weighted: > 119 dB

S/N ratio; unbalanced (RCA); A-weighted: > 117 dB

Maximum Output Level (main outputs): +12 dB.
Advertisement

Frequency response: 20 Hz to 20 kHz +/- 0.017 dB 

Not indicated

THD+noise  1 kHz, < 0.006% (unbalanced into unbalanced out). 

S/N ratio > 114 dB (balanced into unbalanced out).

Advertisement

S/N ratio 113 dB (unbalanced into unbalanced out). 

Analog Audio Performance (Phonol Input) THD+noise; 1 kHz; A-weighted; Moving Magnet: <0.01%

THD+noise; 1 kHz; A-weighted; Moving Coil: <0.1%

S/N ratio; A-weighted; Moving Magnet: > 95 dB

Advertisement

S/N ratio; A-weighted; Moving Coil: > 80 dB

Moving Magnet – THD (total harmonic distortion, ref 10 mV): < 0.001%. 

THD (total harmonic distortion, ref 1.0 mV) Moving Coil < 0.008%  S/N A-weighted

Moving Magnet > 96 dB. 
S/N A-weighted, Moving Coil: > 79 dB. 

Advertisement
Audio Performance (Digital Inputs) Frequency response: 20 Hz to 20 kHz +0 / -0.1 dB

Frequency response: 5 Hz to 80 kHz +0 / -2.7 dB

THD+noise; 1 kHz; A-weighted: <0.0008%

S/N ratio; A-weighted: > 112 dB

Advertisement

The frequency response shown was measured with a high-resolution digital source. At lower sample rates, the frequency response will be limited by the sample rate of the content.

Not Applicable
Power Requirements 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected) 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). 
Dimensions 17” wide x 5-1/4” high (without feet) x 14-1/2” deep (without connectors)

17” wide x 5-2/4” high (including feet) x 15” deep (including knobs and connectors)

17” wide x 6” high x 16.5” deep (includes feet and terminals) 
Weight  13 lbs (unboxed) 28 lbs (unboxed)
Expansion Slots 2 x rear panel slots None
emotiva-xsp-2-angle

The Bottom Line 

The Emotiva XSP-2 looks like a strong value play in the serious two-channel preamp category. It’s competitively priced and feature packed with a fully balanced analog signal path, built-in MM/MC phono stage, balanced bass management, Home Theater Bypass, an external processor loop, and a factory-installed ESS-based DAC module for $1,599.

What makes the XSP-2 more interesting than a typical stereo preamp is its modular architecture. The two rear expansion slots give Emotiva room to add future functionality, and the included DAC module already brings HDMI-ARC, USB, coaxial, and optical digital inputs without turning the XSP-2 into a compromised digital-first control box. The analog section remains the main event.

Advertisement
Advertisement. Scroll to continue reading.

The catch is obvious but important: the XSP-2 is a preamplifier, not an integrated amplifier. It still needs to be connected to a power amplifier before it can drive a pair of loudspeakers. Emotiva’s own options include the XPA-2 Gen3 stereo power amplifier at $1,499, a pair of XPA-DR1 Differential Reference monoblocks at $1,699 each, or one of its Build-Your-Own XPA Gen3 power amplifiers starting at $1,499.

Also missing at launch is built-in streaming. Emotiva says a streaming module is in the works, but for now, anyone who wants network playback will still need to add an external streamer or use one of the XSP-2’s digital inputs. HDMI-ARC is useful for TV integration, but this is still a two-channel preamp, not a surround processor or all-in-one streaming amplifier.

Pro Tip: You may also desire to include one or two subwoofers into the mix, such as the xs12e ($399 each).

Advertisement

Price & Availability

The Emotiva XSP-2 Differential Reference preamplifier is available now for $1,599 at Emotiva.com.

Source link

Advertisement
Continue Reading

Tech

You Can Now Check ASUS Laptop Spare Part Prices Online Before Booking a Repair

Published

on

Repair costs are often unknown until you visit a service center. ASUS aims to address that with its new Part Price Checker, which lets customers check the prices of genuine spare parts online before booking a repair. The user just needs to provide the device’s serial number to view the prices of ASUS spare parts. This will give them an idea of the cost of repairs before going to a service center.

Part of the ASUS Assurance Program

Asus NVIDIA RTX Spark

The Part Price Checker is part of the ASUS Assurance program, which aims to make after-sales support more convenient for customers. The program is built around four key pillars: Assured Quality, Always-on Support, All-around Coverage, and Added-value Services. The new tool lets customers check the prices of genuine spare parts online before visiting a service center. This makes it easier to estimate repair costs before taking the device for service.

ASUS recently expanded the availability of genuine laptop batteries through its Exclusive Stores and authorized partners across India. The Part Price Checker builds on that effort by giving customers another way to plan repairs before booking a service.

Instead of guessing replacement costs, customers can determine the true cost before visiting their authorized ASUS repair facility. This enables customers to budget for the repair and schedule visits to the repair facility at a convenient time.

Source link

Advertisement
Continue Reading

Tech

Dublin’s TensorX to partner with Solstice on sovereign European AI

Published

on

Earlier this week, TensorX raised €8m in a seed funding round, which its founder Shane Morton described as an ‘opening move’ ahead of a much larger build-out.

Irish AI infrastructure company TensorX is to collaborate with finance provider Solstice in a partnership to deliver up to $1bn-worth of sovereign European AI infrastructure.

The companies said they “will work together to create a facility … to finance AI hardware and data centre build-out to meet rising demand for sovereign compute across the EU”.

Dublin-based TensorX buys and runs AI hardware and data centre capacity across the EU, with the aim of connecting its start-up and enterprise clients to private compute and keeping “prompts and data on European infrastructure with full data residency and zero retention”.

Advertisement

Solstice is described as “an on-chain settlement and yield protocol and part of the Deus X Capital ecosystem”.

“Europe wants AI that can run on its own terms, on its own soil, without handing its data to someone else’s cloud on the world stage,” said Tim Grant, the chair of TensorX.

“Meeting that accelerating demand takes hardware, and a lot of it. The billion dollars going into GPUs and data centre capacity is the first step, and we expect to keep buying as demand grows. Solstice gives us a financing partner that can keep pace with this incredibly fast-moving market.”

Relatedly, Solstice will launch a yield asset named ‘aiUSX’ to help companies finance AI build-outs using capital they already hold.

Advertisement

“Every company is turning into an AI company, and every one of them watches its inference bill climb,” said Ben Nadareski, CEO of Solstice.

“aiUSX puts the money they set aside for AI to work in the meantime. They get access to the kind of AI-infrastructure lending that used to sit with large institutions, the capital stays liquid, and what it earns goes toward inference later.”

Earlier this week, TensorX raised €8m in a seed funding round with the goal of further contributing to European plans for sovereign AI infrastructure, which its founder Shane Morton described as an “opening move” ahead of a much larger build-out.

The EU is concerned about the control US technology companies wield over the bloc’s technology infrastructure and data.

Advertisement

“European companies don’t want to make a political statement about their AI stack. They want to make a practical one,” said Grant earlier this week. “Their data has to stay in Europe, on infrastructure they can trust, under laws they are required to comply with.”

Data from Accenture suggests that 62pc of European organisations seek sovereign AI, while 75pc of European enterprises plan to move AI workloads to local providers by 2030, according to Gartner.

“Sovereign AI is one of the biggest infrastructure build-outs of this decade, and it runs on capital as much as it runs on chips,” said Stuart Connolly of Deus X Capital.

“TensorX builds the compute, Solstice brings the financing and aiUSX lets more companies take part in funding it.”

Advertisement

Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.

Source link

Advertisement
Continue Reading

Tech

Does DeleteMe Actually Get Your Info off the Internet? I Tried It

Published

on

Recent estimates approximate that there are 16.4 billion Google searches per day globally. A huge portion of those searches is for people’s names. Of those names, many are likely public figures, like Lionel Messi, Sabrina Carpenter, or any number of politicians doing something nefarious. But a great many of the name searches are ostensibly for normies. Maybe even you. Definitely me, based on the deluge of spam calls I get.

DeleteMe was founded in 2010 and claims to be one of the oldest companies in data removal. Services like DeleteMe and its competitor Incogni work by contacting data brokers on your behalf and getting them to remove your personal information, including your current and past mailing addresses, your phone numbers, and your email address. Theoretically, this process removes you from annoying marketing lists and makes it harder for randos to find you. I’ve used DeleteMe since January, and while it’s not a silver bullet for ensuring the complete absence of unwanted communication from strangers and scammers, it seems to have helped with the number of unsolicited marketing calls I get. It also helped clean up personal info from my Google results, so you’re more likely to read an old article I wrote than see where I live.

Image may contain Page and Text

DeleteMe via Martin Cizmar

I have also used Incogni, where I managed an account for my elderly mother. She got similar results, which is to be expected, says DeleteMe executive Jason Dalrymple. Services like DeleteMe and others “all basically do the same thing,” he says. “We’re bound by the same laws and constraints in compliance. It’s a cat-and-mouse game.”

That’s because the degree to which data brokers need to cooperate with the requests of deletion companies is legally murky, given that there’s no comprehensive federal law in the US that regulates the way private companies can use personal data. Rather, most regulations are at the state level, where protections are varied (I live in Missouri, where I feel lucky to have running water). Some states, like California, have more protections, while many states have none. Regardless of where you live, data brokers aren’t necessarily just going to delete your information upon request. They may request further verification of your identity before complying and confirming the request was granted, they may deny the request, and they may ignore the request completely—all actions that require follow-up correspondence with the deletion service.

Advertisement

With DeleteMe and Incogni, you can track progress via a dashboard that provides an at-a-glance update on how many removal requests have been made and fulfilled. A few more clicks will show you specifics on each broker, though most of these will be unfamiliar to typical users. The main difference I noticed between DeleteMe and Incogni is that the former’s dashboard doesn’t update as often as the latter’s and also doesn’t show as many brokers being contacted.

I prefer the Incogni dashboard because it’s satisfying and reassuring to log in every few days and see that the company is crawling the web and busting brokers, each of which it rates based on their speed and general compliance. There are constant status updates for thousands of websites. DeleteMe, on the other hand, creates a report every few months showing progress on a smaller number of sites. Dalrymple argues that his company’s surgical approach is a feature, not a bug.

Source link

Advertisement
Continue Reading

Tech

Apple hikes Mac, iPad prices as chip crunch squeezes pockets

Published

on

Apple said it couldn’t shield customers from rising component costs anymore.

An exacerbating chip shortage has led Apple to hike up prices for several of its products. Price jumps go from as little as €40 for the HomePod Mini, to nearly €1,000 for the Mac Studio M3 Ultra, though iPhones are unaffected for now.

Apple share prices dropped more than 6pc yesterday, before making marginal gains in pre-market trading today (26 June). Prices, however, have dropped more than 10pc in a month.

“The rapid expansion of AI data centres has created an extraordinary surge in demand for memory and storage”, a company spokesperson told news publications, adding that Apple has “never seen a component price increase this much, this quickly”.

Advertisement

Apple said that the worsening situation meant that it couldn’t shield customers from the rising component costs any longer.

The company previously raised prices for the iPhone 17 Pro, MacBook Air and MacBook Pro, but this is the first time it is hiking rates on products across several categories at once.

iPads will now cost EU customers €100 more at €529; the iPad mini will jump by €120 to €719. The new MacBook Neo, launched in March, is also seeing a price hike of €140, now costing customers €839 to purchase in the EU.

Outgoing CEO Tim Cook told investors in April that AI-led component shortages would constrain supply for Mac, Mac Mini, Mac Studio and MacBook Neo for the June quarter.

Advertisement

“Realistically, on the Mac Mini and the Mac Studio, I believe it will take several months to reach supply-demand balance,” he said at the time. “We are not at the point where we are saying this is going to end anytime soon.”

Chief financial officer Kevan Parekh, meanwhile, said that iPhones faced supply constraints in the March quarter. Bloomberg Intelligence expects iPhone prices to also rise, likely targeting the Pro models.

Apple isn’t alone in suffering from a shortage in memory chips. According to Counterpoint Research, global smartphone shipments are poised to drop nearly 14pc in 2026, with the squeeze particularly affecting entry-level and mid-range smartphones. Prices are expected to jump by as much as 13pc this year.

Meanwhile, rising prices allow for second-hand and refurbished sellers to fill in gaps with cheaper and environmentally better alternatives, according to Refurbed co-founder Kilian Kaminski.

Advertisement

Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.

Source link

Advertisement
Continue Reading

Tech

Today’s NYT Connections: Sports Edition Hints, Answers for June 27 #642

Published

on

Looking for the most recent regular Connections answers? Click here for today’s Connections hints, as well as our daily answers and hints for The New York Times Mini Crossword, Wordle and Strands puzzles.


Today’s Connections: Sports Edition features a tricky purple category. You’ll need to look inside of words for four words that have a certain connection. If you’re struggling with the puzzle but still want to solve it, read on for hints and the answers.

Connections: Sports Edition is published by The Athletic, the subscription-based sports journalism site owned by The Times. It doesn’t appear in the NYT Games app, but it does in The Athletic’s own app. Or you can play it for free online.

Advertisement

Read more: NYT Connections: Sports Edition Puzzle Comes Out of Beta

Hints for today’s Connections: Sports Edition groups

Here are four hints for the groupings in today’s Connections: Sports Edition puzzle, ranked from the easiest yellow group to the tough (and sometimes bizarre) purple group.

Yellow group hint: Wow, you’re terrific!

Advertisement

Green group hint: Hoops winners.

Blue group hint: Hoops stars who’ve been honored.

Purple group hint: A name is hidden in each word.

Answers for today’s Connections: Sports Edition groups

Yellow group: A revered star.

Advertisement

Green group: Last four NBA champions.

Blue group: WNBA players in the Basketball Hall of Fame.

Purple group: Starts with an NFL starting QB.

Read more: Wordle Cheat Sheet: Here Are the Most Popular Letters Used in English Words

Advertisement

What are today’s Connections: Sports Edition answers?

completed NYT Connections: Sports Edition puzzle for June 27, 2026

The completed NYT Connections: Sports Edition puzzle for June 27, 2026.

NYT/Screenshot by CNET

The yellow words in today’s Connections

The theme is a revered star. The four answers are great, icon, legend and superstar.

The green words in today’s Connections

The theme is last four NBA champions. The four answers are Boston, Denver, New York and Oklahoma City.

Advertisement

The blue words in today’s Connections

The theme is WNBA players in the Basketball Hall of Fame. The four answers are Cash, Catchings, Leslie and Whalen.

The purple words in today’s Connections

The theme is starts with an NFL starting QB. The four answers are Jacksonville, Mayer, Williamsport and Youngster.

Toughest Connections: Sports Edition categories

The Connections: Sports Edition puzzle can be tough, but it really depends on which sports you know the most about. My husband aces anything having to do with Formula 1, my best friend is a hockey buff, and I can answer any question about Minnesota teams.

That said, it’s hard to pick the toughest Connections categories, but here are some I found exceptionally mind-blowing.

Advertisement

#1: Serie A Clubs. Answers: Atalanta, Juventus, Lazio, Roma.

#2: WNBA MVPs. Answers: Catchings, Delle Donne, Fowles and Stewart.

#3: Premier League team nicknames. Answers: Bees, Cherries, Foxes and Hammers.

#4: Homophones of NBA player names. Answers: Barns, Connect, Heart and Hero.

Advertisement

Source link

Continue Reading

Trending

Copyright © 2025