Connect with us
DAPA Banner

Tech

12 Harbor Freight Tools Beginners Should Steer Clear Of

Published

on





The Harbor Freight tool ecosystem includes plenty of quality gear. The retailer prioritizes great prices on equipment that’s no less valuable in actual use than more expensive types. Harbor Freight sells a range of in-house brands under a variety of toolmaker badges, focusing on automotive equipment, power and hand tools, and even accessories like safes, workbenches and other storage solutions. But there are some tools sold by the outlet that demand a bit of experience and knowledge to use safely or correctly.

DIYers are often eager to get their hands on a new piece of gear. This can give them the motivation they need to set off on a journey of discovery as they tackle the next exciting project on their to-do list. Yet some tools are far more difficult to use than others, introducing issues or safety concerns for those with limited experience or who don’t know how they operate. There’s also a wide range of tools that may feature simple operation, but are only utilized in support of extremely demanding tasks that beginners may not be ready to handle. These 12 tools epitomize this slate of issues. Yet, in many cases bringing their output within your wheelhouse is all about brushing up on your knowledge base; home improvement YouTube channels, online forums, and work within smaller, similar project areas can prepare you a bit better to enlist the help of these pieces of equipment.

Advertisement

Bauer 20V 4-1/2-Inch Slide Switch Angle Grinder

The Bauer 20V 4-1/2-Inch Slide Switch Angle Grinder is an obvious inclusion on a list of tools the beginners might want to rethink. This type of equipment is supremely versatile power, as it can be deployed for cutting, shaping, and even surface preparation tasks like sanding. But this is a tool that feels bound by a blood feud against its owner every time the disc spins up. Angle grinders produce incredible rotational force, and so you’ll want to be extra careful about keeping a firm grasp as you use one. This Bauer model also features a slide switch, which can be a little more dangerous than a paddle-operated solution because it’s unlikely you’ll be holding it at the switch while in use, prompting routine use of the lock-on position. The paddle switch on a tool like an alternative Hercules model features better trigger placement, allowing you to cut the power with much greater ease.

Advertisement

A beginner might still be enticed by the Bauer model, particularly because of its $40 price tag. It does possess a tool-free blade guard and a dual-position side handle. Opting for this tool isn’t necessarily a mistake, but understanding that the unit produces up to 10,500 RPM with a lock-on functionality that you’ll use virtually every time you reach for the grinder (speaking from experience) will keep you safer.

Advertisement

Pittsburgh Needle File Set (12-Piece)

Harbor Freight’s range of accessory tools is robust; plenty of options in this part of its catalog are certainly impressive. The Pittsburgh Needle File Set offers extensive coverage across a range of file geometries that can help support innumerable tasks ranging from touching up a shovel’s edge to keeping your lawn mower’s blades in good working order. The set it is listed at Harbor Freight for just $4, adding an element of cost effectiveness that is truly rare for such a hard hitting option with tremendous versatility. There’s absolutely nothing wrong with this set of files and 601 Harbor Freight buyers have given it a 4.6 star average rating with a 98% recommendation rate.

Where this tool set falls short for beginners is at the back end of each file; none of the tools come with a handle. This is just fine for users who understand how to add them, or perhaps prefer to tackle detail work without one attached for greater control. But this demands a different level of dexterity and command that beginners may not have mastered yet. Pittsburgh also offers a 10-piece needle file set as well as a 12-piece precision set that each feature handles attached to the tools alongside price tags that remain below $10.

Advertisement

Pittsburgh 8-Pound Hickory Sledgehammer

Most tasks featuring a hammer won’t require truly excessive pounding force, but demolition can sometimes demand a sledgehammer. There’s nothing quite like knocking down wall elements with a heavy sledge. Sometimes it’s impractical, and a different demo tool like a reciprocating saw might do a better job, but it’s undeniable how much fun you’ll have smashing apart components bound for the trash heap. However, beginners might not realize until they swing their sledgehammer for the first time that varying handle materials can play a significant role in the experience. The hammer that gets the nod on this list is the outlet’s Pittsburgh 8-Pound Hickory Sledgehammer.

The potential trouble here is that while a wooden handle offers a traditional feel and better responsiveness to the user, it also translates vibration significantly more freely into the hands. For the same reason that youth players don’t swing wooden bats while the pros exclusively carry lumber to the plate, a wooden handle on your striking tool can ultimately send painfully uncomfortable shockwaves running through your forearms. Pittsburgh also offers an 8-pound fiberglass-handled option for $27, just two bucks more than the hickory selection.

Advertisement

Bauer 15 Amp 14-Inch Portable Concrete Pull Saw

The consaw is a critically important tool for anyone working with brick, block, or concrete. It’s something of a demolition tool, but it can also be used to cut material to length during installation tasks. This is a tool that delivers immense power to support some of the hardest cutting requirements you’ll encounter. I’ve rented a consaw on a few occasions, and they’ve always been gasoline-powered models laid out in the traditional format for a classic power output and surprisingly buttery smooth cutting performance. I don’t have personal experience with the Bauer 15 Amp 14-Inch Portable Concrete Pull Saw, but two important features underpinning its use give me pause as someone who’s used tools in this arena before.

It’s worth noting that the tool is listed at Harbor Freight for $300, which is significantly cheaper than the typical consaw that can easily cost thousands of dollars. It also features a 4.2 star average rating from 235 buyers. However, the corded power source means that your mobility may ultimately be severely restricted. It’s also designed to cut on a pull stroke, specifically. This can limit your ability to make clean cuts in vertical walls and other elements, but is likely to enhance accuracy when cutting stock in a horizontal motion.

Advertisement

Windsor Design No. 33 Bench Plane

Harbor Freight offers a small selection of hand planes. The Windsor Design No. 33 Bench Plane appears to be a beautifully crafted woodworking tool, featuring a 23-degree blade angle, hardwood handles with brass fittings, and a high carbon steel cutting blade measuring 2-¾ inches wide for quality cutting and a pleasant experience all around. The tool is listed for $13, making it a cost-effective option that’s likely even more approachable than vintage gear you’d find at a garage sale. However, this is a tool that frequently gets middling to poor user ratings: It features a 3.7 star average from 779 buyers.

Advertisement

Numerous users report that the blade is not razor sharp out of the package and that additional elements of setup work are required to get the plane to take a smooth shaving. It’s simply not ready to use out of the box. To be fair, a $13 precision woodworking tool really shouldn’t be compared directly to much more expensive alternatives that might be capable of transitioning straight from packaging to workbench. Expectation and knowledge about plane maintenance can really trip up a beginner woodworker with this unit. If you aren’t aware of the tasks involved in preparing a hand plane for service, you may ultimately find more frustration with this tool than enjoyment. 

Advertisement

Fasten-Pro Tacking Gun

The Fasten-Pro Tacking Gun looks to be the same kind of tool as any other staple gun you might consider. Because of this visual similarity it’s easy to mix up heavy duty tacking guns and staplers designed for lighter service. This unit from Harbor Freight gets quality reviews, with a 4.2 star average rating from 436 buyers, but it’s not the right tool for handling light fastening tasks. Instead, this fires heavy gauge T-50 style staples suitable for use in hardwoods and even soft metal components.

The tacking gun is a quality option for handling heavier fastening formats, but it’s actually not the best solution for this kind of work in many instances. If you’re driving lots of heavy duty staples into workpieces, the Fasten-Pro hammer tacker is often the better solution because it’s much faster and also limits the amount of force placed on your hands and forearms.

If lighter duty jobs or on the docket, the same brand is still a go-to option, with a three-way tacker and staple gun that delivers standard brad fasteners or U-shaped staples. This tool offers a lighter touch when a heavy dollop of force that would come from a tool like the tacking gun might damage your work surface. Finally, Fasten-Pro’s 2-in-1 stapler/brad nailer offers the same nuanced touch with an electric-powered actuation rather than your grip strength.

Advertisement

Pittsburgh 28-Inch Cable Cutters

The Pittsburgh 28-Inch Cable Cutters is yet another tool that makes this list, but not because it’s a bad implement or fails to achieve a similar standard to alternative solutions. Instead, it exists within a niche subsection of the DIY world in which users will be buying the tool to support a specific, often highly demanding task. Heavy-duty cable cutters like this are not pulled out of the toolbox to shear through small wires designed to carry minimal current. This tool features 28-inch handles to deliver the extreme leverage required to bite into armored cables and other dense power supply lines. Anytime you’re working with electricity, it’s crucial to ensure that you’ve taken the time to prepare the environment and double check your safety protocols. There are a range of mistakes that DIYers frequently make during electrical tasks; many of them come from a lack of experience and can result in shocks or injuries.

By all accounts this is a high quality tool, with 432 customers giving it a 4.1 star average rating. They like its $25 price point and note routinely that it can cut with ease through even thick cable and wire rope. But users will need to be abundantly careful when pulling out these cutters to ensure they aren’t preparing to snip through a live wire carrying a dangerous amperage level. Fortunately, electrical safety is exceedingly simple as long as you’re diligent about your checks and workflow.

Advertisement

Chicago Electric Power Tools 7 Amp 4-Inch Handheld Dry-Cut Tile Saw

Cutting tile isn’t a job for the faint of heart. Even with quality tools at your disposal, this is a nerve-wracking task that requires precision and patience. Maintaining deliberate action throughout a cut and moving at the right speed to limit chipping or breakage is essential. For this reason, many users across all levels of knowledge and skill tend to gravitate toward bulkier, stationary cutting implements, frequently involving moving the workpiece rather than the blade. A tool like the Chicago Electric Power Tools 7 Amp 4-Inch Handheld Dry-Cut Tile Saw runs counter to this preference.

Advertisement

The tool retails for just $40, making it an affordable power tool. It also sports a 4.4 star average rating from 475 customer reviews, indicating that so can be useful in the right hands. Personally, I have limited experience cutting tile but I did try once with an angle grinder, failing miserably to keep the edges clean. However, I’ll add that anytime you leave a chipped edge, there’s a high probability of creating a razor-sharp side while throwing equally dangerous chips around your workspace. Therefore, any tile job you encounter requires care and attention. The tool itself delivers 12,000 RPM blade speeds with the ability to cut material up to 1-⅛-inch thick.

Advertisement

Central Machinery 7 Horsepower Plate Compactor

A plate compactor is a heavy-duty power tool, frequently running on a gasoline engine. The Central Machinery 7 Horsepower Plate Compactor is exactly this kind of device, and offers plenty of pounding force to flatten hard landscaping material. The tool gets great reviews from buyers, with a 4.7 star average rating across 250 reviews and a 97% recommendation rate. It’s listed for $700, which is a pretty good bargain when considering the high cost alternatives out there in the market. Where a beginner may falter with a tool like this is in their project scope. 

Even a small landscaping job requiring a plate compactor tends to leverage a huge volume of heavy material. Last year, when installing a paver driveway, I rented one of these tools; the task of compacting my subbase material was straightforward and enjoyable. What was far more time-consuming was the actual task of laying gravel and sand. A one-car installation required substantial excavation alongside 8 tons of replacement material in addition to the paver bricks themselves, which are no picnic to move either. If you aren’t fully prepared for the physicality of the tasks that come before a plate compactor makes its entrance in your project workflow, you’ll likely be rethinking your decision about handling the job yourself.

Advertisement

Pittsburgh 7-Inch Poly Hand Riveter Kit

Rivets form an important addition to any renovator’s fastening capabilities. You’ll often lean on nails and screws, but rivets are just as valuable when securing fabrics and other materials to wood or even in handling repairs to clothing. Riveters are a key tool when using these fasteners. Among Harbor Freight’s options is the Pittsburgh 7-Inch Poly Hand Riveter Kit. It’s a one-handed tool that promises to set rivets of varying sizes “perfectly in a single stroke.” For those with experience handling a riveter, this may be the case, but operating this type of tool with one hand can be challenging for beginners. The force required to collapse a rivet and set the back end for a secure hold is fairly substantial. Doing it without two hands on the tool can ultimately be more effort than many are ready to deliver.

A classic riveter that offers more leverage is the Fasten-Pro 11-inch model. It features a 360-degree swivel head and comes with four nosepieces for great coverage across a range of needs. Another selection that can make for an enhanced experience is the Doyle 10-inch professional model. It’s a little more expensive, but features a “100% lifetime guarantee” and offers even greater leverage with an ergonomic grip design and a range of color-coded nosepieces.

Advertisement

Hercules 15 Amp 66-Pound 1-⅛-Inch Hex Breaker Hammer

The Hercules 15 Amp 66-Pound 1-⅛-Inch Hex Breaker Hammer is a heavy-duty tool that serves one hyper-specific purpose. It’s not like a rotary hammer that can function as a drilling tool or a concrete chipping option, as it just performs the singular demolition task. Instead, this tool exclusively delivers up to 58 joules of impact energy, making it capable of immense power output in support of large scale demolition. It’s exceptionally capable, but the job it’s designed to handle isn’t one that many beginner tool users will want to take on by themselves.

Breaking up large concrete segments is a multi-stage job. First you’ll need to destroy the element  using a tool like the breaker hammer. This option offers 1,000 beats per minute while also utilizing a built in Maximum Vibration Control to keep user fatigue to a minimum. But that’s only part of the task. Removing the heavy concrete remnants is an entirely new and demanding subtask that can’t be ignored once the initial demolition is completed. As a result, this is easily a job that can make you feel like you’re in over your head.

Advertisement

Bauer 4 Cubic Foot Cement Mixer

The Bauer 4 Cubic Foot Cement Mixer is a tool with 190 ratings from customers, accumulating a 4.8 star average with a 98% recommendation rate. Customers frequently note that it’s easy to use while delivering high quality at a low price. The tool can support mixing tasks featuring up to two 80-pound bags of concrete, mortar, stucco, or other needs. This makes it quality option in support of medium to semi-large concrete tasks or finish work like plastering or rendering walls. Even on smaller projects, having a dedicated mixer available can take a lot of the hassle out doing this job yourself. The tool is available for $380, which is by all accounts a very reasonable price point.

Advertisement

Anyone in the market for a concrete mixing solution will certainly want take a look at this tool. However, it usually takes a special kind of project to demand a mixer like this. You’re often going to seek out mixing solutions for larger pours or substantial plastering tasks rather than small touchup work. As a result, all the other elements of the project are frequently intensely demanding. This may not always be feasible for a home improver, and getting halfway through before realizing you’re way past your comfort zone can sometimes be worse than starting from scratch with professional help.

Advertisement

Methodology

Each of the tools on this list presents unique challenges of one type or another. Frequently, there’s a different option from Harbor Freight that may be better suited to a beginner’s needs. However, some jobs that these tools are specifically designed to fulfill may be better left to professionals. Potentially dangerous tools can increase the risk of injury in the hands of a less experienced operator, while others are purpose-built for heavy duty work that can quickly become overbearing on a beginner who may not have fully prepared for the amount of work ahead.



Advertisement

Source link

Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

April Fools’ Day 2026: The Good, the Bad and the Bizarre of This Year’s Corporate Jokes

Published

on

If you’re online at all in 2026, you know it can feel like April Fools’ Day every day. You’ve almost certainly come across videos and content, often created with AI, and had to stop and ask yourself if what you’re looking at is true or made up. 

Some are obvious. You mean, there aren’t really beds made of kittens, cotton candy and rubies? And I wasn’t really offered a job guarding a spooky funeral home where I might hear tapping coming from the morgue freezer at 3 a.m.? (Both of these are TikTok videos, and the AI is scarily good — and also just scary.)

As brands roll out their April Fools’ Day jokes for this year, I keep thinking that in an AI-heavy world, the jokes seem less surprising, the faked-up art less novel. Here are some highlights from this year’s list of April 1 corporate and tech jokes.

Advertisement

Fortnite: Big heads and llama riding

Here’s an April Fool’s prank that’s more than a joke, it’s real — but only temporary. Fortnite players can try out a 24-hour-only April Fool’s Day game update that throws some truly wacky changes into the popular game. Players get enormous heads, can ride on other players’ shoulders, can use finger guns that go “pew, pew,” make a splat sound when landing after a fall, and, perhaps best of all, rideable llamas have appeared.

Warhammer: The Musical

Hey, if Broadway can make a musical about Alexander Hamilton, or a bunch of cats, surely they can make one about the Warhammer universe? That’s the joke behind this trailer for The Emperor Protects: A Warhammer 40,000 Musical, the April 1 joke from Games Workshop, creator of the popular game world. The 2.5-minute trailer, with impressive costumes and music, really sells it.

Traeger: AI-powered grilling glasses

Screenshot from the Traeger grill site shows their April 1 prank, AI grill glasses.

A

Advertisement

Screenshot by Gael Fashingbauer Cooper/CNET

This April 1 joke seems like it could maybe be a practical, real thing. Traeger makes wood-pellet grills, and this year’s joke is their claim to offer AI-powered grilling eyeglasses. “With smart guidance, thermal imaging, night‑vision, and hands‑free photo and video capture, MEAT‑AI lets you command every cook like never before,” the site touts. Hmm, I wouldn’t actually mind a pair of glasses that could look down at my grill and tell me whether my steak is done or how much more time it needs to cook. Get on that, Traeger.

T-Mobile cologne

Model holds a purple cell phone-shape that is presented as a cologne bottle

Can you smell me now? Wait, wrong cellphone company.

T-Mobile

Want to smell like your cellphone? What does that even mean? Wireless tech giant T-Mobile’s prank is Metro by T-Mobile CALLoGNE, combining call, as in phone call, with cologne. The company touts its April 1 joke as “the world’s first luxury fragrance inspired by the unmistakable scent of a brand-new phone.” Metro is T-Mobile’s prepaid brand, formerly known as MetroPCS. 

Advertisement

Timekettle British translation

They say the US and UK are two nations separated by a common language. You may already know some British phrases, including “boot” for what Americans call a car trunk, and “bonnet” for what we call the hood of a car. Timekettle makes AI-powered translation products, and its April 1 prank is a British-to-American language translation update for its translation devices. Cheerio, old chap.

british-translation-app-april-1

Timekettle offers translation services, but the British English to American English version is a special April 1 joke.

Timekettle

Whisker cat hair clothing

Advertisement
cataire.png

From couture to cat hair, Whisker’s April 1 prank involves cat-hair clothing.

Whisker

If you own a cat, cat hair is already on everything in your closet. So Cataire (like couture, I guess), a line of designer clothing made out of real cat hair, doesn’t seem that far off. Whisker, the company behind the Litter-Robot litter box, is taking this April 1 prank to the meowy max. They’ve actually used real cat hair from adoptable cats at a Michigan animal shelter to adorn three sweaters that will later be sold on eBay. Each eBay listing doubles as an adoption profile for a real shelter cat.

Yahoo’s Scrōll Stoppr

scrollstoppr-1

Doomscrolling isn’t even a possibility with Yahoo’s thumb guard, ScrōllStoppr.

Advertisement

Yahoo

Those who spend too much time on their phones might appreciate the idea behind Yahoo’s prank, Scrōll Stoppr. It’s described as “a delightfully absurd finger accessory that physically blocks your thumb from touching your phone screen.” I hate to break it to Yahoo, but I discovered this myself years ago when I cut my thumb slicing onions for Thanksgiving and had to wrap it in a Band-Aid. Yahoo says you can actually buy this — it will be available for $5 on Yahoo TikTok Shop on April 1 and will be delivered in a box that sounds off with the Yahoo signature yodel. If it sells out, just put on a Band-Aid for the same results. BYO yodel.

Omaha Steaks pocket steak

Man is shown pulling a pocket-sized Omaha steak package our of a denim shirt pocket.

Stake out a spot in your shirt for this pocket steak.

Omaha Steaks

Need a spot of protein on the go? Omaha Steaks is best known for sending giant crates of beef as gifts, but the company’s April 1 product is “the world’s first pocket-sized steak.” It gets beefier: The company jokes that the steak is cooked by motion-activated technology. A rare deal indeed, if well done.

Advertisement

Baskin-Robbins ice cream soup

br-soup.png

Slurp up Baskin-Robbins April Fools’ Day joke, ice-cream soup.

Baskin-Robbins

Baskin-Robbins has always had creative ice cream flavors, but for April 1, the company is hyping… ice cream soup. Not real, of course, but they’re promoting the faux frozen dessert in hopes that people will be inspired to take advantage of a buy-one-get-one 50% off deal on pre-packed quarts April 1-2 for Baskin-Robbins Rewards Members. Slurp ’em if you got ’em.

Baby Bottle Pop, supplement style

Advertisement
bottle-pop-april-1.png

Suck on this, say the makers of Baby Bottle Pop.

Baby Bottle Pop

Grown-ups don’t get any of the fun kid candy, but instead are stuck taking vitamins and supplements. Baby Bottle Pop Candy, which is exactly what it sounds like, candy in a baby-bottle container, is pretending for April 1 that it now comes in adult flavors. Is protein a flavor? Is fiber? Salmon is, but candy salmon is too much, even for this Seattleite. Thankfully, it’s just for April Fools’ Day.

Source link

Advertisement
Continue Reading

Tech

Watch Artemis II Live: When is NASA’s Historic Moon Launch?

Published

on

The top sections of a large rocket and a launch gantry against the background of a deep blue sky.

NASA’s Artemis II Space Launch System (SLS) rocket and Orion spacecraft and the launch gantry at the Kennedy Space Center in Florida on March 31, 2026.

NASA/Keegan Barber

Fifty-four years after the last Apollo mission to the moon, NASA’s Artemis II mission is set to return. The Space Launch System rocket carrying the Orion spacecraft is scheduled to take off from the Kennedy Space Center in Florida on Wednesday afternoon. The four-person crew, made up of American and Canadian astronauts, will be 250,000 miles from Earth at its farthest point in the journey to orbit the moon. This is everything you need to know about NASA’s mission, its dreams for a future lunar base and this new age of space exploration.

How to watch Artemis II moon launch

Advertisement

Takeoff is scheduled for Wednesday at 6:24 p.m. ET / 3:24 p.m. PT from NASA’s Kennedy Space Center in Cape Canaveral, Florida. Delays are common during launches, especially due to weather, so we’ll keep this story updated if the takeoff time changes.

You can watch the livestream on NASA’s YouTube, official website and social media accounts. If you’re looking for coverage in Spanish, check out NASA’s Spanish YouTube channel.

How to Watch NASA's Artemis II Mission chart

Here’s all the ways you can keep up with the Artemis II mission.

Advertisement

NASA

What to expect from this mission to the moon

The Artemis II mission is designed to orbit the moon on a 10-day trip. The astronauts will not be touching down on the moon’s surface this trip, but they will be testing the system’s life support systems for the first time, according to NASA. This mission also sets the stage for future Artemis missions, including Artemis IV, scheduled for 2028, which should put humans back on the moon.

We’ll be keeping up-to-date on all the latest Artemis II news, so check back here today and throughout the week for updates.

Source link

Advertisement
Continue Reading

Tech

OpenAI closes larger than expected funding round of $122bn

Published

on

The giant funding round gives OpenAI a post-money valuation of $852bn.

Artificial intelligence company OpenAI has announced the closure of a recent funding round at $122bn, exceeding the projected figure of $110bn. 

The round was backed by strategic partners Amazon, Nvidia and SoftBank, with continued participation from OpenAI’s long-term partner Microsoft. SoftBank co-led the round alongside a16z, DE Shaw Ventures, MGX, TPG and accounts advised by T Rowe Price Associates. There was also participation from several global institutions.

For the first time, OpenAI extended participation to investors through banking channels, raising more than $3bn from individual investors. The funding round gives OpenAI a post-money valuation of $852bn, the company said. 

Advertisement

In a post about the announcement, OpenAI said, “This is commercial scale and it is mission scale. The fastest way to widen the benefits of AI is to put useful intelligence in people’s hands early and let that access compound globally. 

“AI is driving productivity gains, accelerating scientific discovery and expanding what people and organisations can build. This funding gives us the resources to continue to lead at the scale this moment demands.”

The announcement comes at a time when OpenAI is calling a halt to specific features and products, as it aims to better manage costs and reprioritise resources. For example, plans for an erotic ChatGPT were reportedly put on hold indefinitely, as OpenAI elected to carry out additional research and to address concerns from staff and investors. 

Additionally, in late March, the platform revealed plans to shut down controversial AI video generator Sora just a few months after announcing a multi-year licensing deal with Disney. OpenAI explained that bybending the feature, the organisation can redirect its focus onto other projects. 

Advertisement

OpenAI is facing significant challenges from rivals in the AI space and recently news surfaced indicating the company’s plans to combine its AI chatbot, coding tool and web browser into a desktop ‘superapp’.

Sources noted that the move is intended to counter harsh competition from the AI giant’s rivals, such as Anthropic. 

Don’t miss out on the knowledge you need to succeed. Sign up for the Daily Brief, Silicon Republic’s digest of need-to-know sci-tech news.

Advertisement

Source link

Continue Reading

Tech

Robinhood sues WA state to block enforcement of gambling laws against prediction markets

Published

on

Robinhood isn’t waiting to get sued in Washington state. 

The financial services company filed a preemptive federal suit against Washington’s attorney general and gambling commission, arguing the state can’t use its gambling laws to shut down prediction market trading that it contends is authorized under federal commodities law.

The suit comes a few days after Washington Attorney General Nick Brown sued prediction market platform Kalshi in state court. The state takes the position that event contracts — which let users wager on the outcome of real-world activities ranging from NFL games to elections to the number of measles cases in a given year — amount to illegal gambling.

In its lawsuit, filed March 30 in U.S. District Court in Tacoma, Wash., Robinhood argues that federal law preempts Washington’s gambling statutes as applied to event contracts traded on exchanges regulated by the Commodity Futures Trading Commission. 

Robinhood Markets, based in Menlo Park, Calif., is known for popularizing commission-free stock trading. The suit was filed by its Chicago-based subsidiary, Robinhood Derivatives

Advertisement

The company, which is registered with the CFTC as a futures commission merchant, offers event contracts through the Kalshi and ForecastEx exchanges and says it plans to launch trading on a third exchange, Rothera, later this year, according to the complaint.

Pre-emptive move: The company points to the Kalshi suit and a December warning from the state Gambling Commission declaring prediction markets “unauthorized” as evidence that enforcement against the company is imminent.

The complaint was filed on behalf of Robinhood by the law firms Davis Wright Tremaine in Seattle and Cravath, Swaine & Moore in New York.

Robinhood’s suit cites Brown’s statement, at a press conference last week, that Kalshi is “just a bookie with a fancy name, and a huge amount of venture capital behind them.”

Advertisement

The suit says the company had “no choice but to file this lawsuit to protect its customers and its business.”

“[W]e believe in the power of prediction markets and the important role they play at the intersection of trading, news, economics, politics, culture, and sports,” a Robinhood spokesperson said via email, noting that the markets are federally regulated. “This step, consistent with our past actions in other jurisdictions, aims to preserve access for customers in Washington.”

GeekWire has reached out to the Washington AG’s office for comment.

Broader landscape: The case is part of a national wave of litigation over prediction markets. Kalshi is fighting more than 20 civil lawsuits, and Arizona’s AG filed criminal charges last month. 

Advertisement

Courts are split on the issue. Federal judges in New Jersey and Tennessee, for example, have ruled that states cannot enforce their gambling laws against federally regulated prediction markets, while state courts in Massachusetts and Ohio have ruled that they can.

Washington state has staked out a broader position than other states in this fight, arguing that all event contracts — not just sports bets — are illegal under state law. Other states have focused their enforcement on sports-related contracts specifically.A bipartisan bill introduced last week by Sens. Adam Schiff (D-Calif.) and John Curtis (R-Utah) would ban sports betting on prediction market platforms.

Read the full complaint below.

Robinhood v. WA state by GeekWire

Advertisement

Source link

Continue Reading

Tech

Are Mini Leaf Blowers ACTUALLY Worth It?

Published

on







Leaf blowers are pretty versatile tools for keeping your yard tidy, blowing snow off your car, or anything else that needs a healthy measure of forced air. Unfortunately for people with more space constraints, your average blower is pretty big and unwieldy. Additionally, for people with limited mobility options or noise limitations, a smaller, more compact leaf blower might be the ticket.

Advertisement

Enter the advent of the mini leaf blower. We all know that a full-size leaf blower packs some power, but how does a tiny handheld version perform? Does the reduction in size make it less useful? In this video, we take a couple mini leaf blowers purchased online through the ringer and see what each one is capable of.

Will the name brand come up on top, or will a lesser-known brand take the crown as the winner? More importantly, are mini leaf blowers even worth it compared to the full-size versions?

Advertisement



Source link

Continue Reading

Tech

Meta and YouTube found liable in landmark social media addiction trial

Published

on

Mark Lanier, the folksy Texas litigator who doubles as a part-time pastor, held a jar of M&Ms in front of the Los Angeles jury and told them that each one represented a billion dollars of Meta’s market capitalisation. There were, by that maths, roughly 1,400 sweets in the jar. The jury awarded his client six of them. The question now stalking Silicon Valley is what happens when the other jars start to empty.

On Wednesday 25 March, a California jury found Meta and Google liable on all counts in the first bellwether trial to test whether social media platforms can be treated as defective products, engineered, like a faulty car seat or a contaminated drug, to cause harm. The plaintiff, a 20-year-old woman identified only as K.G.M. and referred to in court as Kaley, told the jury she had begun using YouTube at six years old and Instagram at nine, and that the platforms had amplified personal struggles into body dysmorphia, depression, and suicidal thoughts. After nine days of deliberation, 43 hours in total,  the jurors agreed.

The damages were modest by big-tech standards: $3 million in compensatory damages and $3 million in punitive damages, split 70-30 between Meta and Google. Meta’s share amounts to $4.2 million against a company whose market capitalisation, at the time of the verdict, stood at approximately $1.4 trillion. But the financial significance of the ruling lies not in what was awarded but in what it unlocked. More than 10,000 individual cases and nearly 800 school-district claims are pending in federal multidistrict litigation, with eight further bellwether trials scheduled for the months ahead. The verdict establishes, for the first time, that a jury will accept the legal theory that social media apps should be treated as products whose design is inherently defective.

The ruling landed one day after a separate jury in Santa Fe, New Mexico, ordered Meta to pay $375 million in civil penalties ,$5,000 per violation — after finding the company had violated state consumer-protection laws by enabling child sexual exploitation on Facebook and Instagram. New Mexico became the first state to prevail at trial against a social media company over child-safety concerns. Evidence presented during that six-week trial included internal Meta documents and testimony from former employees establishing that the platform’s design features had enabled predators to target minors. A bench trial on the state’s remaining claims against Meta is scheduled to begin on 4 May.

Advertisement

The 💜 of EU tech

The latest rumblings from the EU tech scene, a story from our wise ol’ founder Boris, and some questionable AI art. It’s free, every week, in your inbox. Sign up now!

The back-to-back verdicts sent Meta’s stock into its steepest decline in more than two years. Shares fell 6.8 per cent the day after the Los Angeles verdict, continued sliding to an 8 per cent drop the following day, and finished the week down 11 per cent. By month’s end, Meta was down 19 per cent, having shed roughly $310 billion in market value. Analysts at JPMorgan and Goldman Sachs began revising their price targets, citing what they described as unquantifiable tail risk from the cascade of litigation now using the verdict as a template.

Inside Meta, the verdict is viewed as a disappointment rather than a crisis — at least publicly. The company had entered the trial confident in its position, arguing that Kaley’s struggles with family and school predated her use of Instagram and that reducing something as complex as teen mental health to a single cause risked leaving broader issues unaddressed. A spokesperson told the BBC that many teenagers rely on digital communities to find belonging. Meta said it would appeal, and gave no indication it would settle future cases or alter its product design.

Advertisement

Google took a different tack, arguing that YouTube had been mischaracterised in the trial. YouTube is “a responsibly built streaming platform, not a social media site,” the company said — a distinction the jury evidently did not find persuasive. Both companies will have the opportunity to refine their legal arguments as the bellwether programme continues, but the evidentiary record from Kaley’s trial, including internal documents in which Meta executives discussed efforts to attract and retain young users, can now be recalled in subsequent proceedings.

TikTok and Snapchat’s parent company Snap Inc had been co-defendants in the case but settled before the trial began. The settlement amounts remain undisclosed, and neither company admitted liability, but the decision to resolve their exposure before a jury could weigh in suggests their legal teams reached a different calculus than Meta’s. Both companies remain defendants in several upcoming bellwether trials.

The broader implications extend well beyond courtroom damages. Eric Goldman, an associate dean and professor of law at Santa Clara University, told the BBC he viewed the social media addiction cases as a potentially existential threat to the industry’s current business model. The social media industry, Goldman wrote after the verdict, “faces existential legal liability and inevitably will need to reconfigure their core offerings if they can’t get broad-based relief on appeal.” Former Twitter executive Bruce Daisley framed the structural problem more bluntly: two decades of growth had produced businesses “geared for trying to force people to spend more and more time” on their platforms, and any regulation or litigation that threatened that engagement model became a problem to be neutralised through lobbying and public relations.

The legal reckoning arrives at a moment when the technology industry’s relationship with regulators is already under severe strain. Australia’s social-media age ban, which took effect in December 2025, has prompted enforcement actions against five platforms for non-compliance. The European Union’s Digital Services Act and AI Act are imposing new obligations that many companies have struggled to meet. The NIS2 Directive has expanded cybersecurity regulatory scope across eighteen sectors. And the US Congress, where Meta chief executive Mark Zuckerberg was meeting Senate Majority Leader John Thune on the day the verdict landed, continues to weigh federal age-verification and platform-liability legislation.

Advertisement

What distinguishes the litigation from the regulatory push is that juries, unlike legislators, do not negotiate. They decide. And in Los Angeles last week, twelve citizens decided that the products Meta and Google built were defective, that the companies knew they were defective, and that a young woman was harmed as a result. The $6 million penalty is a rounding error for companies worth more than the GDP of most nations. The legal precedent is not.

As Kaley’s attorney Jayne Conroy told the BBC after the verdict: there is, right now, a lot of maths going on in boardrooms at Meta, Google, Snap, and TikTok.

Source link

Advertisement
Continue Reading

Tech

Spotify Finally Tries Hi-Fi: Lossless Listening Lounge in London Built Around Horn Speakers and Bryston Power

Published

on

Spotify has spent the better part of two decades convincing the world that convenience beats fidelity. Now it wants you to sit down, shut up, take your shoes off, and listen. Really listen. Inside its London headquarters, the company has opened a 30-seat Listening Lounge designed to showcase its long-delayed lossless tier, which finally arrived in 2025 after competitors like TIDAL, Qobuz, and Apple Music had already moved on to higher ground. Timing has never been Spotify’s strong suit when it comes to sound quality, but at least it showed up.

The Listening Lounge is invite-only, which feels about right. Spotify Premium users and “top fans” get the nod, assuming they want to trade playlists and background noise for something resembling focus. The room is built around album-centric sessions and curated listening events, which Spotify now calls “intentional listening.” Audiophiles have been calling it Tuesday night since 1978, but sure, let’s rebrand it and roll it out to the press who will eat it up like horseradish on gefilte fish at the Passover seder. On second thought — stick with the biltong and some mustard.

To Spotify’s credit, it didn’t cheap out on the system. This isn’t a soundbar and some mood lighting. The setup leans hard into old-school hi-fi: custom horn-loaded speakers from Friendly Pressure, Bryston 3B Cubed power amplifiers, a PrimaLuna DAC paired with an Evo 400 tube preamp, and a Bluesound Node Icon handling streaming duties.

spotify-listening-lounge-london-angle

The speakers are big, unapologetic, and built around Alnico drivers and compression horns that don’t care about your furniture layout or your neighbors. This is two-channel stereo with no Atmos tricks, no DSP safety net, and no interest in pretending otherwise. Left, right, and whatever your ears can handle.

Advertisement

The room itself plays along. Designed with a Japanese vinyl bar aesthetic, the system sits elevated like some kind of altar, because apparently we’re doing ritual now. Acoustic treatment is handled seriously, reflections are controlled, distractions minimized. And yes, you take your shoes off. Nothing says “we’re serious about lossless audio” quite like white socks from Marks & Spencer on a polished floor while a tube preamp warms the room.

The timing of all this is hard to ignore. Spotify’s lossless rollout wasn’t early. It wasn’t even competitive. It was late. While others were pushing 24-bit streams and building credibility with listeners who actually care about sound, Spotify leaned into scale, algorithms, and playlists designed for people who don’t want to think too hard about what they’re hearing. Now that fidelity has become “important,” Spotify is doing what large companies do best. Build an experience, control the narrative, invite the right people, and hope nobody remembers how they had to be dragged kicking and screaming into the room.

spotify-listening-lounge-london-right

The system, however, does its job. Reports point to serious dynamics, scale that fills the room, and a level of clarity that makes lossless audio feel like more than a marketing checkbox. Horn speakers bring speed and impact, along with a presentation that can get a little sharp if the recording demands it. That’s the trade-off. This setup doesn’t smooth things over or make bad recordings sound polite. It tells the truth, whether you like it or not. There’s a lesson there for the high-end audio community.

This whole exercise isn’t really about a room in London. It’s about positioning. Spotify wants to be seen as a company that understands high-end audio, not just one that delivers background music between podcasts and ads. It wants a seat at the same table as services that built their reputations on fidelity, not convenience. That’s a tough pivot when your entire business model was built on making music easier, faster, smaller, and rather crappy sounding.

Advertisement

The Bottom Line

The Listening Lounge is impressive. The system is real. The intent is finally pointed in the right direction. But there’s an unavoidable edge of irony here. Audiophiles have been building rooms like this for decades without the need for an invite list or a press release. Spotify didn’t invent serious listening. It just discovered that it matters.

And that’s where this either becomes something meaningful or just another well-lit detour. Spotify isn’t a niche player trying to earn credibility. It’s the largest music streaming platform on the planet, with hundreds of millions of users; more than all of its direct competitors combined. If lossless audio actually matters to the company, this can’t stop at a single curated room in London with a guest list and a carefully controlled narrative. That’s not a movement. That’s a demo.

Because the real test isn’t what happens inside that room. It’s what happens outside of it. Does Spotify push lossless as a core feature across the platform, front and center, where its massive user base can actually engage with it? Does it educate listeners on why better sound quality matters? Does it integrate that experience into everyday listening in a way that doesn’t require an invitation and a plane ticket?

Advertisement. Scroll to continue reading.
Advertisement

Right now, it feels like Spotify is trying to prove something—to the press, to the industry, maybe even to itself. But if this is going to land, it needs to scale beyond a showcase and become part of the product story in a real, unavoidable way. Otherwise, this Listening Lounge risks being remembered for what it looks like today: a very expensive reminder that Spotify showed up late and is still figuring out how serious it wants to be.

Source link

Advertisement
Continue Reading

Tech

Aspyr: Hey, Those Crappy Tomb Raider Remastered Outfits Were Made By Our Artists, Not AI!

Published

on

from the McPromptism dept

I’m going to trust that most of our audience will have some idea of what McCarthyism was in the 1950s. To summarize very briefly, it was an anti-communist campaign that spread into becoming equally anti-leftist throughout the country, with a specific focus on driving the supposed communist influences out of major media in America, such as radio and Hollywood. This led to a public hyper-vigilant in looking for supposed communists everywhere, as well as plenty of cases of false accusations of communist activity purposefully foisted upon people for personal reasons. This rabid, frothy-mouthed era of suspicion became a major stain on America in the 1950s.

I’m watching a version of this begin to take form around artificial intelligence. I know, I know: there are very real dangers and negative outcomes that could come to be from AI. That was true of communism and our Cold War enemy in the Soviet Union as well. My point is not that AI is great all the time and any pushback against it is invalid. Instead, my point is that we’re starting to see what I’ll call McPromptism, where some percentage of the public looks for AI everywhere it can and, if use is suspected, immediately decries it as terrible and demands that people not engage with the supposed user.

And just like McCarthyism, McPromptism gets its accusations wrong sometimes. You can see a version of that in the story of Aspyr’s remastering of old Tomb Raider games and the horrible outfits that were produced for the protagonist, Lara Croft.

Earlier this week we reported on fan reaction to the latest update to the Tomb Raider I-III Remastered collection, in which the game received a new Challenge Mode, while Lara received a suite of new outfits to wear as rewards. And oh wow, they were bad. Comically bad. So bad, in fact, that one of the remaster’s original artists posted on X to distance himself and his colleagues from the dross. Alongside all of this was the suspicion that genAI might have been involved in the fits’ creation, given just how dreadful they looked. Publisher Aspyr has now finally responded to the claims to insist no AI was used at all, instead stating they were created by “our team of artists.” Which raises more questions.

If you want to see a somewhat humorous look at the outfit textures that are the subject of public complaint, here you go.

Advertisement

On the one hand, for someone like me who is not into the anti-AI dogma out there, it is objectively funny for some people to point at bad video game textures and claim they’re so bad because they’re obviously created using generative AI… only to have the company that made them say, “Nuh uh! It was our human employees who made them!” It’s almost Monty-Python-esque, in a way.

But this default among some in the gaming public to be “This thing in gaming is bad, so it must have been made using AI!” is just one more kind of silly that is out there right now. Aspyr doesn’t exactly have a perfect reputation when it comes to remastering games, after all, and it built that reputation long before genAI came along.

It seems clear that this was a case of images being released to promote the remastered game that Aspyr didn’t live up to in the actual game itself. No AI, just human beings not hitting the mark. It happens all the time. Hell, there is even a chance that AI could have done a better job. Not a certainty by any stretch, but a possibility.

Advertisement

But the real take away from this otherwise minor episode for me was the McPromptism misfire. If you’re going to rage against the literal machine in the video gaming industry, which I think is the wrong stance to take anyway, at least let it be righteous rage.

Filed Under: ai, mcpromptism, tomb raider, video games

Companies: aspyr

Advertisement

Source link

Continue Reading

Tech

Watch NASA count down to the launch of humanity’s first moon voyage in nearly 54 years

Published

on

NASA’s Space Launch System rocket stands on its launch pad in preparation for the Artemis 2 moon launch. (NASA Photo / Bill Ingalls)

After years of postponements and close to $100 billion in spending, NASA is finally counting down to its first attempt to send astronauts around the moon since Apollo 17 in 1972.

The 10-day Artemis 2 mission is set to begin today with the liftoff of NASA’s Space Launch System rocket from NASA’s historic Launch Complex 39B at Kennedy Space Center in Florida. The two-hour launch window opens at 6:24 p.m. ET (3:24 p.m. PT), and NASA is streaming live mission coverage of the countdown on two different YouTube channels.

NASA has fueled up the 322-foot-tall SLS rocket with liquid hydrogen and oxygen, and there’s an 80% chance of acceptable weather for launch. Rain showers are the main concern.

Artemis 2 is the first crewed test flight in a series leading up to a moon landing that’s currently scheduled for 2028. It follows Artemis 1, which sent a crewless Orion space capsule around the moon in 2022. This time, four astronauts will be riding inside Orion: NASA mission commander Reid Wiseman, NASA astronauts Christina Koch and Victor Glover, and Canadian astronaut Jeremy Hansen. Koch will be the first woman to go beyond Earth orbit, and Hansen will be the first non-American to do so.

Although the astronauts won’t be landing on the lunar surface, they’ll follow a figure-8 trajectory that will send them 4,700 miles beyond the far side of the moon and make them the farthest-flung travelers in human history.

Advertisement

Last week, NASA Administrator Jared Isaacman laid out a plan for establishing a permanent base on the moon and preparing for even farther trips into the solar system. On the eve of the launch, Isaacman played up the significance of Artemis 2 in that plan. “The next era of exploration begins,” he said in a post to X.

Senior test director Jeff Spaulding, a veteran of the space shuttle program, said he was looking forward to the mission. “I’m excited about going to the moon,” he told reporters. “I’m excited about establishing a presence there. It’s something that I have had a desire for, for a great many years — and then to get humans out to Mars as well.”

The health of the Artemis 2 astronauts will be monitored during the flight to gauge the effects of deep-space travel. The crew will also assess Orion’s performance and practice in-flight safety procedures. For example, they’ll rehearse the protocol for taking shelter from radiation storms that might flare up during trips beyond Earth’s protective magnetosphere. They’ll also participate in experiments and make observations of the moon’s far side.

“They’re going to be able to see the whole moon as a lunar disk on the lunar far side,” Marie Henderson, lunar science deputy lead for the Artemis 2 mission, said in a NASA video. “So, that’s a brand-new, unique perspective that humans haven’t been able to look at before.”

Advertisement

At the end of the trip, the crew and their Orion capsule are due to splash down in the Pacific Ocean off the California coast. They’ll be brought to a recovery ship for medical checkouts and their return to shore, following a routine that became familiar during the Apollo era.

Artemis 2 is about the history of America’s space program as well as its future. The round-the-moon mission profile matches that of Apollo 8, which served as a unifying event for a nation riven by the social tumult of the time. That mission’s commander, Frank Borman, reported receiving a telegram reading, “Congratulations to the crew of Apollo 8. You saved 1968.” Notably, less than a third of Americans living today were around when Apollo 8 flew.

The main motivation for the Apollo program was America’s superpower competition with the Soviet Union, and today, the geopolitical stakes are similarly high. NASA and the White House are seeking to jump-start progress on Artemis in part because China is targeting a crewed moon landing by 2030.

Sen. Maria Cantwell, D-Wash., said this week during a visit to Seattle-area suppliers for the Artemis program that it’s important for America to get to the moon first. “We’re trying to get the best real estate on the moon,” she said. “So, to do that, you’ve got to get up there to claim it.”

Advertisement

The course of the Artemis program, which is named after the goddess of the moon and the twin sister of Apollo in Greek mythology, hasn’t always run smooth. When the program was given its name in 2019, the Artemis 2 mission was planned for 2022 or 2023, with the moon landing scheduled for 2024. The cost of the program has been estimated at $93 billion through 2025, with each Artemis launch costing $4.1 billion.

Artemis 2’s launch team ran into several challenges during this year’s preparations for launch. Liftoff was initially scheduled for February, but a liquid hydrogen leak forced NASA to reset the launch for March. The launch date was reset again when a helium pressurization problem required a rocket rollback for repairs. The SLS was brought back out to the pad on March 20, and preparations went smoothly since then.

Several companies with a presence in the Seattle area are banking on Artemis’ success. For example, a facility in Redmond operated by L3Harris (previously known as Aerojet Rocketdyne) builds thrusters for the Orion spacecraft and is already working ahead on the Artemis 8 mission.

Boeing is the lead contractor for the SLS rocket’s core stage. Karman Space & Defense in Mukilteo provides hatch release mechanisms and parachute deployment hardware for Orion. And Jeff Bezos’ Blue Origin space venture, based in Kent, is developing a Blue Moon lander that future Artemis crews could ride to the lunar surface.

Advertisement

Blue Origin’s New Glenn rocket is expected to send an uncrewed cargo version of its lander to the moon sometime in the next few months.

Read more: Artemis 2 gets a push from Pacific Northwest tech

Source link

Continue Reading

Tech

Engineer Slips Lightning Back Into the iPhone 17 Pro With One Inventive Case

Published

on

iPhone 17 Pro Lightning Port Case
Ken Pillonel, a Swiss engineer, struck again. He’s well-known for refurbishing outdated iPhones with creative add-on cases, which he even sells. This time, however, he turned the tables. On April 1st, he completed a totally new prototype in just a few days, a slim protective cover that hands the iPhone 17 Pro a working Lightning port right where Apple moved on from it.



If you’ve recently updated from an iPhone 14 or earlier, you understand the pain. All of those old cords, docks, and chargers you used to love are now rendered worthless unless you carry a separate adapter with you everywhere. Pillonel effectively solved the challenge by working in reverse. Instead of forcing the phone to use a newer plug, he designed a cover that allows Lightning cables to plug right in while the iPhone 17 Pro remains safely tucked inside its USB-C shell.

Sale


Wireless Charger Stand Charging Station: 3 in 1 Charger Stand Multiple Devices for Apple – iPhone 17 16e…
  • 3 in 1 Wireless Charger Station: This 3-in-1 wireless charger is designed to work seamlessly with a variety of devices, including iPhone 17 16e…
  • Fast Charging Power: Ensure your devices are efficiently charged with up to 7.5W for phones, 5W for earbuds, and 3W for watches. The charger is…
  • Portable and Foldable Design: Featuring a foldable, lightweight design, this charging station is ideal for home, office, travel or trip. Manufacturer…

iPhone 17 Pro Lightning Port Case
It all starts with some careful effort on the electronics side. He designed tiny custom circuit boards to shrink a standard USB-C to Lightning adapter down to almost nothing. These boards are located inside the bottom border of the casing and add only a few mils of thickness. Next came the casing, which was produced in flexible TPU using a high-end 3D printer that is good at reducing waste. He also made a little jig to help get the MagSafe magnets in the appropriate place, and when he snapped everything together, it fit like a charm, no tools required.

iPhone 17 Pro Lightning Port Case
When it’s all put together, the case feels exactly like any other you’d get in a store, soft to the touch and durable enough for daily use. When you insert the iPhone 17 Pro inside, the internal cables align neatly with the phone’s USB-C port. Plugging a Lightning cable into the new hole outside just works; power flows exactly like it would on an older model. Yes, charging works well, as he demonstrated in his whole build video; now he just needs to test data transfer and other accessories.

iPhone 17 Pro Lightning Port Case
Pillonel never meant to sell this one. He refers to the finished piece as one of the oddest things he has ever put together, a tongue-in-cheek reference to Lightning’s official departure from the roster years ago. Nonetheless, the project illustrates a wider point. With some work and the correct parts, compatibility gaps between old and new technology can be bridged in inventive ways that keep favorite accessories alive.
[Source]

Advertisement

Source link

Continue Reading

Trending

Copyright © 2025