Based mostly on Services growth prospects, Bernstein analyst Mark Newman raised his Apple price target to $340 from $325, while maintaining an Outperform rating.
Analysts raise their price target for AAPL
Analyst Mark Newman mentioned that there’s now better insight into Apple’s long-term earnings potential. Apple has seen growth in services and ongoing capital returns, as highlighted in a recent research summary. Bernstein’s revised target reflects confidence in Apple’s ability to generate steady cash flow even as hardware demand remains uneven in some regions. The firm pointed to expanding services revenue, higher margins, and a large installed base as key supports for the higher valuation. The analyst pointed out that Apple’s share repurchase program is a key factor supporting per-share earnings growth. Additionally, Apple’s ability to generate free cash flow over time plays a significant role in growth. Continue Reading on AppleInsider | Discuss on our Forums
Tilly Norwood, a digital character from the UK studio Particle6, dropped her debut music video “Take the Lead” on March 10. The project is meant to be a playful response to the criticism she faced after her introduction in 2025. But instead of silencing the skeptics, the clip has become a fresh flashpoint in the conversation about whether artificial intelligence can produce good art.
The early reviews are pretty brutal. Critics have described the track as “copy-paste uplift” that reads like a corporate mission statement rather than pop music. The lyrics lean on jargon like “scale” and “next evolution.” Visually, the piece struggles with the uncanny valley, with moments like Norwood’s teeth blurring into a single block in earlier sketches.
How the video makes its case
The visuals in “Take the Lead” are chaotic on purpose. You get flamingos floating through clouds, dolphins flying through the air, and Norwood performing in packed stadiums. But the song’s message is dead serious. Its central hook argues that AI is not the enemy and frames the technology as a superpower for human creators.
Tilly Norwood
That message gets a weirdly self-aware visual aid. In one scene, Norwood tries and fails to complete a CAPTCHA test, a joke about her own digital nature. The track itself was generated using the AI platform Suno, giving it a polished but generic pop foundation.
Where the real work happened
Here is the part of the story that complicates things. While Norwood is a synthetic performer, she is not a solo act. A team of 18 people spent months bringing this project to life. The group included a director, a costume designer, and even a comedy writer. The vocals came from Suno, but real-world fingerprints are all over the final product.
But the heavy human involvement raises its own questions. If it took nearly 20 professionals months to make a three-minute clip that critics are calling hollow, what does that say about the limits of this technology?
How the industry is responding
The team behind Norwood is not slowing down. The video description teased a possible appearance at the 2026 Academy Awards on March 15, with a joke about valet parking for her flamingo.
The creators have bigger plans. They are building what they call the Tillyverse, a cloud-based space where interconnected AI characters can live and work. They want to create 40 more digital personalities, and Norwood has an official acting debut scheduled for later this year.
That puts the industry in an odd spot. The critics are loud, and the union opposition is clear. SAG-AFTRA has stated flatly that Norwood is not an actor. But the projects keep coming. Whether you see this video as a cautionary tune or a misunderstood trailblazer, the experiment is moving forward. The next test arrives whenever that acting debut drops.
From top left, clockwise: Makko CEO Jeremy Bird; Pipeshub CEO Rishabh Gupta; Flightline CEO Jesse Collins; AttorneyAide CEO Rohit Kundaji; and Liminary CEO Sarah Andrabi.
Our latest Startup Radar spotlight features founders from the Seattle region using AI to help automate the assessment of medical records, video game production, and much more.
Read on for brief descriptions of each company — along with pitch assessments from “Mean VC,” a GPT-powered critic offering a mix of encouragement and constructive feedback.
Check out past Startup Radar posts here, and email tips@geekwire.com to flag other companies and startup news.
The business: AI tool for personal injury law firms to automate the review of medical records. It ingests records and produces structured outputs like patient chronologies, expense summaries, and draft case narratives. The product launched publicly in February, with early users in small and mid-sized personal injury firms across the U.S.
Leadership: Founder Rohit Kundaji was an engineering leader at DoorDash and a software engineering manager at Facebook and OfferUp.
Advertisement
Mean VC: “Solid wedge — medical record review is brutal — but the bar for accuracy and traceability is high, and one confident mistake will get you tossed. Win by being obsessively verifiable (page-level citations, redlines, review workflow), integrate with case management, and price per matter so firms can justify it instantly.”
The business: Building a verification layer for financial decisions, starting with mortgages. Designed to help banks pressure-test decisions against documentation and rules or standards. The company is pre-launch and working with banks and independent mortgage lenders as design partners.
Leadership: Founder and CEO Jesse Collins previously co-founded Friday Harbor, a mortgage automation startup based in the Seattle region. He was also a senior engineer at Affirm and led engineering at the United States Senate Federal Credit Union.
Mean VC: “Mortgage underwriting is full of painful, expensive errors, but ‘verification layer’ can easily become a slow compliance tax that no one owns internally. Pick one must-fix point (doc-to-rule validation), make every decision fully auditable, and integrate directly into the Loan Origination System (LOS) so it saves time instead of adding steps.”
The business: AI-native storage and memory layer that automatically recalls material from various sources when they’re needed. Initially targeting independent strategy consultants. The company spun out of Madrona Venture Labs and has raised funding from Crosslink Capital, ex/ante, and two Seattle funds: Pack VC and TheFounderVC.
Leadership: CEO Sarah Andrabi previously was a head of engineering at Dropbox and a security engineer at Microsoft.
Mean VC: “The promise — pull the right snippets from all your sources at the right moment — is real, but consultants won’t adopt another tool unless it saves hours every week and never leaks or mis-cites. Make it obsessive about provenance (citations, permissions, versioning), and package it as a ‘client-ready brief generator’ that turns scattered material into something billable in under an hour.”
The business: Game development platform aimed at helping studios and indie creators make games faster and cheaper. Its AI tools accelerate production but is designed to let humans steer creative decisions. More than 3,000 people joined its beta that wrapped up last month.
Advertisement
Leadership: CEO and co-founder Jeremy Bird spent more than a decade at Amazon across gaming and Prime Video. Co-founder Tony Valcarcel previously led marketing at Seattle gaming startup Shrapnel and was a digital marketing director at Convoy, and co-founder Mike Fehlauer Hayes helped create Penny Arcade Expo (PAX) conference.
Mean VC: “The risk is you become a grab bag of features when studios really want one tool they can rely on every day. Build a couple opinionated, end-to-end workflows that output production-ready assets in a consistent style, then showcase creators who shipped and will publicly say you sped them up.”
The business: Open-source “workplace AI” that uses enterprise context graphs to enable search and Q&A for internal company information across existing software tools. It also lets users deploy AI agents that triage tickets, generate insights, and trigger workflows. Pipeshub is pre-revenue and recently relocated to Seattle from San Francisco after raising funding from the AI2 Incubator.
Leadership: CEO and co-founder Rishabh Gupta spent four years at Adobe working on cloud infrastructure. Co-founder Abhishek Gupta — Rishabh’s brother — was previously a vice president at Goldman Sachs leading global trading infrastructure.
Advertisement
Mean VC: “The space is crowded, and the quickest way to lose trust is confident answers built on stale or unauthorized data. Lean hard into permissions, citations, and freshness guarantees, then anchor adoption through an IT/helpdesk deployment with a managed option so it doesn’t turn into an internal maintenance project.”
While working on a project that involved super-thin prints, [Julius Curt] came up with selective ironing, a way to put designs on the top surface of a print without adding any height.
For those unfamiliar, ironing is a technique in filament-based 3D printing that uses the extruder to smooth out top surfaces after printing them. The hot nozzle makes additional passes across a top surface, extruding a tiny amount in the process, which smooths out imperfections and leaves a much cleaner surface. Selective ironing is nearly the same process, but applied only in a certain pattern instead of across an entire surface.
Selective Ironing can create patterns by defining the design in CAD, and using a post-processing script.
While conceptually simple, actually making it work was harder than expected. [Julius] settled on using a mixture of computer-aided design (CAD) work to define the pattern, combined with a post-processing script. More specifically, one models the desired pattern into the object in CAD as a one-layer-tall feature. The script then removes that layer from the model while applying the modified ironing pattern in its place. In this way, one can define the pattern in CAD without actually adding any height to the printed object. You can see it in action in the video, embedded below.
We’ve seen some interesting experiments in ironing 3D prints, including non-planar ironing and doing away with the ironing setting altogether by carefully tuning slicer settings so it is not needed. Selective Ironing is another creative angle, and we can imagine it being used to embed a logo or part number as easily as a pattern.
Advertisement
Selective Ironing is still experimental, but if you find yourself intrigued and would like to give it a try head over to the GitHub repository where you’ll find the script as well as examples to try out.
Images from the missile strike in southern Iran were more horrifying than any of the case studies Air Force combat veteran Wes J. Bryant had pored over in his mission to overhaul how the U.S. military safeguards civilian life.
Parents wept over their children’s bodies. Crushed desks and blood-stained backpacks poked through the rubble. The death toll from the attack on an elementary school in Minab climbed past 165, most of them under age 12, with nearly 100 others wounded, according to Iranian health officials. Photos of small coffins and rows of fresh graves went viral, a devastating emblem of Day 1 in the open-ended U.S.-Israeli war in Iran.
Advertisement
Bryant, a former special operations targeting specialist, said he couldn’t help but think of what-ifs as he monitored fallout from the Feb. 28 attack.
Just over a year ago, he had been a senior adviser in an ambitious new Defense Department program aimed at reducing civilian harm during operations. Finally, Bryant said, the military was getting serious about reforms. He worked out of a newly opened Civilian Protection Center of Excellence, where his supervisor was a veteran strike-team targeter who had served as a United Nations war crimes investigator.
Today, that momentum is gone. Bryant was forced out of government in cuts last spring. The civilian protection mission was dissolved as Defense Secretary Pete Hegseth made “lethality” a top priority. And the world has witnessed a tragedy in Minab that, if U.S. responsibility is confirmed, would be the most civilians killed by the military in a single attack in decades.
Dismantling the fledgling harm-reduction effort, defense analysts say, is among several ways the Trump administration has reorganized national security around two principles: more aggression, less accountability.
Advertisement
Trump and his aides lowered the authorization level for lethal force, broadened target categories, inflated threat assessments and fired inspectors general, according to more than a dozen current and former national security personnel. Nearly all spoke on condition of anonymity for fear of retaliation.
“We’re departing from the rules and norms that we’ve tried to establish as a global community since at least World War II,” Bryant said. “There’s zero accountability.”
Citing open-source intelligence and government officials, several news outlets have concluded that the strike in Minab most likely was carried out by the United States. President Donald Trump, without providing evidence, told reporters March 7 that it was “done by Iran.” Hegseth, standing next to the president aboard Air Force One, said the matter was under investigation.
The next day, the open-source research outfit Bellingcat said it had authenticated a video showing a Tomahawk missile strike next to the school in Minab. Iranian state media later showed fragments of a U.S.-made Tomahawk, as identified by Bellingcat and others, at the site. The United States is the only party to the conflict known to possess Tomahawks. U.N. human rights experts have called for an investigation into whether the attack violated international law.
Advertisement
The Department of Defense and White House did not respond to requests for comment.
Since the post-9/11 invasions of Afghanistan and Iraq, successive U.S. administrations have faced controversies over civilian deaths. Defense officials eager to shed the legacy of the “forever wars” have periodically called for better protections for civilians, but there was no standardized framework until 2022, when Biden-era leaders adopted a strategy rooted in work that had begun under the first Trump presidency.
Formalized in a 2022 action plan and in a Defense Department instruction, the initiatives are known collectively as Civilian Harm Mitigation and Response, a clunky name often shortened to CHMR and pronounced “chimmer.” Around 200 personnel were assigned to the mission, including roughly 30 at the Civilian Protection Center of Excellence, a coordination hub near the Pentagon.
The CHMR strategy calls for more in-depth planning before an attack, such as real-time mapping of the civilian presence in an area and in-depth analysis of the risks. After an operation, reports of harm to noncombatants would prompt an assessment or investigation to figure out what went wrong and then incorporate those lessons into training.
Advertisement
By the time Trump returned to power, harm-mitigation teams were embedded with regional commands and special operations leadership. During Senate confirmation hearings, several Trump nominees for top defense posts voiced support for the mission. Once in office, however, they stood by as the program was gutted, current and former national security officials said.
Around 90% of the CHMR mission is gone, former personnel said, with no more than a single adviser now at most commands. At Central Command, where a 10-person team was cut to one, “a handful” of the eliminated positions were backfilled to help with the Iran campaign. Defense officials can’t formally close the Civilian Protection Center of Excellence without congressional approval, but Bryant and others say it now exists mostly on paper.
“It has no mission or mandate or budget,” Bryant said.
Spike in Strikes
Global conflict monitors have since recorded a dramatic increase in deadly U.S. military operations. Even before the Iran campaign, the number of strikes worldwide since Trump returned to office had surpassed the total from all four years of Joe Biden’s presidency.
Advertisement
Had the Defense Department’s harm-reduction mission continued apace, current and former officials say, the policies almost certainly would’ve reduced the number of noncombatants harmed over the past year.
Beyond the moral considerations, they added, civilian casualties fuel militant recruiting and hinder intelligence-gathering. Retired Gen. Stanley McChrystal, who commanded U.S. and NATO forces in Afghanistan, explains the risk in an equation he calls “insurgent math”: For every innocent killed, at least 10 new enemies are created.
U.S.-Israeli strikes have already killed more than 1,200 civilians in Iran, including nearly 200 children, according to Human Rights Activists News Agency, a U.S.-based group that verifies casualties through a network in Iran. The group says hundreds more deaths are under review, a difficult process given Iran’s internet blackout and dangerous conditions.
Defense analysts say the civilian toll of the Iran campaign, on top of dozens of recent noncombatant casualties in Yemen and Somalia, reopens dark chapters from the “war on terror” that had prompted reforms in the first place.
Advertisement
“It’s a recipe for disaster,” a senior counterterrorism official who left the government a few months ago said of the Trump administration’s yearlong bombing spree. “It’s ‘Groundhog Day’ — every day we’re just killing people and making more enemies.”
In 2015, twodozen patients and 14 staff members were killed when a heavily armed U.S. gunship fired for over an hour on a Doctors Without Borders hospital in northern Afghanistan, a disaster that has become a cautionary tale for military planners.
“Our patients burned in their beds, our medical staff were decapitated or lost limbs. Others were shot from the air while they fled the burning building,” the international aid group said in a report about the destruction of its trauma center in Kunduz.
A U.S. military investigation found that multiple human and systems errors had resulted in the strike team mistaking the building for a Taliban target. The Obama administration apologized and offered payouts of $6,000 to families of the dead.
Advertisement
Human rights advocates had hoped the Kunduz debacle would force the U.S. military into taking concrete steps to protect civilians during U.S. combat operations. Within a couple years, however, the issue came roaring back with high civilian casualties in U.S.-led efforts to dislodge Islamic State extremists from strongholds in Syria and Iraq.
In a single week in March 2017, U.S. operations resulted in three incidents of mass civilian casualties: A drone attack on a mosque in Syria killed around 50; a strike in another part of Syria killed 40 in a school filled with displaced families; and bombing in the Iraqi city of Mosul led to a building collapse that killed more than 100 people taking shelter inside.
In heavy U.S. fighting to break Islamic State control over the Syrian city of Raqqa, “military leaders too often lacked a complete picture of conditions on the ground; too often waved off reports of civilian casualties; and too rarely learned any lessons from strikes gone wrong,” according to an analysis by the Pentagon-adjacent Rand Corp. think tank.
Released in 2019, the review Mattis launched was seen by some advocacy groups as narrow in scope but still a step in the right direction. Yet the issue soon dropped from national discourse, overshadowed by the coronavirus pandemic and landmark racial justice protests.
During the Biden administration’s chaotic withdrawal of U.S. forces from Afghanistan in August 2021, a missile strike in Kabul killed an aid worker and nine of his relatives, including seven children. Then-Defense Secretary Lloyd Austin apologized and said the department would “endeavor to learn from this horrible mistake.”
That incident, along with a New York Times investigative series into deaths from U.S. airstrikes, spurred the adoption of the Civilian Harm Mitigation and Response action plan in 2022. When they established the new Civilian Protection Center of Excellence the next year, defense officials tapped Michael McNerney — the lead author of the blunt RAND report — to be its director.
“The strike against the aid worker and his family in Kabul pushed Austin to say, ‘Do it right now,’” Bryant said.
Advertisement
The first harm-mitigation teams were assigned to leaders in charge of some of the military’s most sensitive counterterrorism and intelligence-gathering operations: Central Command at MacDill Air Force Base in Tampa, Florida; the Joint Special Operations Command at Fort Bragg, North Carolina; and Africa Command in Stuttgart, Germany.
A former CHMR adviser who joined in 2024 after a career in international conflict work said he was reassured to find a serious campaign with a $7 million budget and deep expertise. The adviser spoke on condition of anonymity for fear of retaliation.
Only a few years before, he recalled, he’d had to plead with the Pentagon to pay attention. “It was like a back-of-the-envelope thing — the cost of a Hellfire missile and the cost of hiring people to work on this.”
Bryant became the de facto liaison between the harm-mitigation team and special operations commanders. In December, he described the experience in detail in a private briefing for aides of Sen. Chris Van Hollen, D-Md., who had sought information on civilian casualty protocols involvingboat strikes in the Caribbean Sea.
Advertisement
Bryant’s notes from the briefing, reviewed by ProPublica, describe an embrace of the CHMR mission by Adm. Frank Bradley, who at the time was head of the Joint Special Operations Command. In October, Bradley was promoted to lead Special Operations Command.
At the end of 2024 and into early 2025, Bryant worked closely with the commander’s staff. The notes describe Bradley as “incredibly supportive” of the three-person CHMR team embedded in his command.
Bradley, Bryant wrote, directed “comprehensive lookbacks” on civilian casualties in errant strikes and used the findings to mandate changes. He also introduced training on how to integrate harm prevention and international law into operations against high-value targets. “We viewed Bradley as a model,” Bryant said.
Still, the military remained slow to offer compensation to victims and some of the new policies were difficult to independently monitor, according to a report by the Stimson Center, a foreign policy think tank. The CHMR program also faced opposition from critics who say civilian protections are already baked into laws of war and targeting protocols; the argument is that extra oversight “could have a chilling effect” on commanders’ abilities to quickly tailor operations.
Advertisement
To keep reforms on track, Bryant said, CHMR advisers would have to break through a culture of denial among leaders who pride themselves on precision and moral authority.
“The initial gut response of all commands,” Bryant said, “is: ‘No, we didn’t kill civilians.’”
Reforms Unraveled
As the Trump administration returned to the White House pledging deep cuts across the federal government, military and political leaders scrambled to preserve the Civilian Harm Mitigation and Response framework.
At first, CHMR advisers were heartened by Senate confirmation hearings where Trump’s nominees for senior defense posts affirmed support for civilian protections.
Advertisement
Gen. Dan Caine, chairman of the Joint Chiefs of Staff, wrote during his confirmation that commanders “see positive impacts from the program.” Elbridge Colby, undersecretary of defense for policy, wrote that it’s in the national interest to “seek to reduce civilian harm to the degree possible.”
When questioned about cuts to the CHMR mission at a hearing last summer, U.S. Navy Vice Adm. Brad Cooper, head of Central Command, said he was committed to integrating the ideas as “part of our culture.”
Despite the top-level support, current and former officials say, the CHMR mission didn’t stand a chance under Hegseth’s signature lethality doctrine.
The former Fox News personality, who served as an Army National Guard infantry officer in Iraq and Afghanistan, disdains rules of engagement and other guardrails as constraining to the “warrior ethos.” He has defended U.S. troops accused of war crimes, including a Navy SEAL charged with stabbing an imprisoned teenage militant to death and then posing for a photo with the corpse.
Advertisement
A month after taking charge, Hegseth fired the military’s top judge advocate generals, known as JAGs, who provide guidance to keep operations in line with U.S. or international law. Hegseth has described the attorneys as “roadblocks” and used the term “jagoff.”
At the Civilian Protection Center of Excellence, the staff tried in vain to save the program. At one point, Bryant said, he even floated the idea of renaming it the “Center for Precision Warfare” to put the mission in terms Hegseth wouldn’t consider “woke.”
By late February 2025, the CHMR mission was imploding, say current and former defense personnel.
Shortly before his job was eliminated, Bryant openly spoke out against the cuts in The Washington Post and Boston Globe, which he said landed him in deep trouble at the Pentagon. He was placed on leave in March, his security clearance at risk of revocation.
Advertisement
Bryant formally resigned in September and has since become a vocal critic of the administration’s defense policies. In columns and on TV, he warns that Hegseth’s cavalier attitude toward the rule of law and civilian protections is corroding military professionalism.
Bryant said it was hard to watch Bradley, the special operations commander and enthusiastic adopter of CHMR, defending a controversial “double-tap” on an alleged drug boat in which survivors of a first strike were killed in a follow-up hit. Legal experts have said such strikes could violate laws of warfare. Bradley did not respond to a request for comment.
“Everything else starts slipping when you have this culture of higher tolerance for civilian casualties,” Bryant said.
Concerns were renewed in early 2025 with the Trump administration’s revived counterterrorism campaign against Islamist militants regrouping in parts of Africa and the Middle East.
Advertisement
Last April, a U.S. air strike hit a migrant detention center in northwestern Yemen, killing at least 61 African migrants and injuring dozens of others in what Amnesty International says “qualifies as an indiscriminate attack and should be investigated as a war crime.”
Operations in Somalia also have become more lethal. In 2024, Biden’s last year in office, conflict monitors recorded 21 strikes in Somalia, with a combined death toll of 189. In year one of Trump’s second term, the U.S. carried out at least 125 strikes, with reported fatalities as high as 359, according to the New America think tank, which monitors counterterrorism operations.
“It is a strategy focused primarily on killing people,” said Alexander Palmer, a terrorism researcher at the Washington-based Center for Strategic and International Studies.
Last September, the U.S. military announced an attack in northeastern Somalia targeting a weapons dealer for the Islamist militia Al-Shabaab, a U.S.-designated terrorist group. On the ground, however, villagers said the missile strike incinerated Omar Abdullahi, a respected elder nicknamed “Omar Peacemaker” for his role as a clan mediator.
Advertisement
After the death, the U.S. military released no details, citing operational security.
“The U.S. killed an innocent man without proof or remorse,” Abdullahi’s brother, Ali, told Somali news outlets. “He preached peace, not war. Now his blood stains our soil.”
In Iran, former personnel say, the CHMR mission could have made a difference.
Under the scrapped harm-prevention framework, they said, plans for civilian protection would’ve begun months ago, when orders to draw up a potential Iran campaign likely came down from the White House and Pentagon.
Advertisement
CHMR personnel across commands would immediately begin a detailed mapping of what planners call “the civilian environment,” in this case a picture of the infrastructure and movements of ordinary Iranians. They would also check and update the “no-strike list,” which names civilian targets such as schools and hospitals that are strictly off-limits.
One key question is whether the school was on the no-strike list. It sits a few yards from a naval base for the Iranian Revolutionary Guard. The building was formerly part of the base, though it has been marked on maps as a school since at least 2013, according to visual forensics investigations.
“Whoever ‘hits the button’ on a Tomahawk — they’re part of a system,” the former adviser said. “What you want is for that person to feel really confident that when they hit that button, they’re not going to hit schoolchildren.”
If the guardrails failed and the Defense Department faced a disaster like the school strike, Bryant said, CHMR advisers would’ve jumped in to help with transparent public statements and an immediate inquiry.
Advertisement
Instead, he called the Trump administration’s response to the attack “shameful.”
“It’s back to where we were years ago,” Bryant said. If confirmed, “this will go down as one of the most egregious failures in targeting and civilian harm-mitigation in modern U.S. history.”
Who should be directly liable for online infringement – the entity that serves it up or a user who embeds a link to it? For almost two decades, most U.S. courts have held that the former is responsible, applying a rule called the server test. Under the server test, whomever controls the server that hosts a copyrighted work—and therefore determines who has access to what and how—can be directly liable if that content turns out to be infringing. Anyone else who merely links to it can be secondarily liable in some circumstances (for example, if that third party promotes the infringement), but isn’t on the hook under most circumstances.
The test just makes sense. In the analog world, a person is free to tell others where they may view a third party’s display of a copyrighted work, without being directly liable for infringement if that display turns out to be unlawful. The server test is the straightforward application of the same principle in the online context. A user that links to a picture, video, or article isn’t in charge of transmitting that content to the world, nor are they in a good position to know whether that content violates copyright. In fact, the user doesn’t even control what’s located on the other end of the link—the person that controls the server can change what’s on it at any time, such as swapping in different images, re-editing a video or rewriting an article.
But a news publisher, Emmerich Newspapers, wants the Fifth Circuit to reject the server test, arguing that the entity that embeds links to the content is responsible for “displaying” it and, therefore, can be directly liable if the content turns out to be infringing. If they are right, the common act of embedding is a legally fraught activity and a trap for the unwary.
The Court should decline, or risk destabilizing fundamental, and useful, online activities. As we explain in an amicus brief filed with several public interest and trade organizations, linking and embedding are not unusual, nefarious, or misleading practices. Rather, the ability to embed external content and code is a crucial design feature of internet architecture, responsible for many of the internet’s most useful functions. Millions of websites—including EFF’s—embed external content or code for everything from selecting fonts and streaming music to providing services like customer support and legal compliance. The server test provides legal certainty for internet users by assigning primary responsibility to the person with the best ability to prevent infringement. Emmerich’s approach, by contrast, invites legal chaos.
Advertisement
Emmerich also claims that altering a URL violates the Digital Millennium Copyright Act’s prohibition on changing or deleting copyright management information. If they are correct, using a link shortener could put users at risks of statutory penalties—an outcome Congress surely did not intend.
Both of these theories would make common internet activities legally risky and undermine copyright’s Constitutional purpose: to promote the creation of and access to knowledge. The district court recognized as much and we hope the appeals court agrees.
In 2022, Google first announced its Google Play Games on PC project, which allows Android users to play their favorite games on Windows PC. Since then, Google has released several updates to improve its service, with Google Play Games for PC officially exiting beta on September 23, 2025.
It’s one of the few Google projects that hasn’t been left to wither away, and now, Google Play is rolling out a handful of useful changes that could genuinely improve how you discover, buy, and play games, whether you’re on your phone or PC.
The timing seems intentional. Google made these announcements at GDC (Game Developers Conference), where Microsoft also announced Xbox mode, which allows players to get a console-like gaming experience on Windows 11 devices.
This year’s focus appears to be on improving the cross-device and cross-platform gaming experience.
Advertisement
Can we finally try games before paying for them?
My favorite part of the new announcements has to be how you pay for games. If you’ve ever felt burned by buying a game on your phone and then having to buy it again on PC, Google has got you covered. A new “Buy once, play anywhere” pricing model means that a single purchase on Google Play gives you access to both the mobile and PC versions.
Google
For those still on the fence about buying a paid game, Google is also introducing Game Trials, which let you jump into the full version of a paid game for free. If you like it, you buy it, and your progress carries over seamlessly.
What other improvements can you expect as a gamer?
Google is introducing a new PC section designed to improve the discoverability of games optimized for PC gaming. At the same time, it’s expanding the library with more paid titles and highlighting some of the most anticipated indie games.
Google
Beyond that, Google is doubling down on Play Games Sidekick, an in-game overlay that gives you AI-generated tips without forcing you to quit and search the web. Google is also making it easier to get tips from real players. Community Posts is now live in English for dozens of popular games, providing you with a dedicated space to ask questions and share tips with other players.
These updates don’t reinvent gaming, but they address real frustrations in ways that matter to gamers.
The Stihl BGA 30 leaf blower is a handy and lightweight leaf blower that runs on small batteries. With a detachable nozzle and responsive trigger, it’s easy to use but isn’t powerful enough for large garden spaces.
Lightweight and well balanced
Compatible with the AS system
Power level indicator on the handle
Not the most powerful air flow
Short run time on full power
Key Features
Lightweight
At just 1.7kg, this leaf blower is easy to use and store
Powerful for the size
Advertisement
Can blow air at up to 15m/s
Cordless
Uses the 10.8V AS battery system
Introduction
Forming part of Stihl’s capable and ever-expanding range of handy garden tools powered by the lightweight AS battery system, the BGA 30 is an ultra-portable leaf blower that still manages to pack a punch.
Advertisement
With excellent ergonomics and a lightweight and portable body, this leaf blower lacks raw power but is incredibly easy to operate.
Advertisement
Design and Features
Well balanced between battery and tip
Battery charge indicator on the handle
Removable nozzle tip for close up work
Something that Stihl always gets right is ergonomics and balance. The handle is well sculpted and just about big enough for large hands, and is built at the right angle for leaf blowing, so I could hold it naturally without having to bend my wrist. Weighing just 1.7 kg with the battery, it’s very light which reduces arm fatigue during use.
The variable speed trigger is responsive, and makes it easy to control the level of air flow coming out.
Image Credit (Trusted Reviews)
When you pull it a little set of LED lights above the handle show you the current charge level.
Image Credit (Trusted Reviews)
Advertisement
This leaf blower comes supplied with an easily detachable nozzle tip. Using it without the tip is great for clearing sawdust off a mitre saw or leaves and other debris from garden furniture. The long-reach nozzle tip is attached by twisting and locking into place.
Advertisement
Image Credit (Trusted Reviews)
The power comes from Stihl’s excellent little AS battery ecosystem. These batteries run at 10.8V and 2.6Ah, and weigh just 220 g. If you value comfort and manoeuvrability over raw power, this battery system is fantastic. It doesn’t have the capacity of much larger batteries like the EGO’s huge 56 Volt range, but carrying a spare AS battery with you is no problem and can be swapped out in seconds.
If you have AS batteries already, you can buy the BGA 30 without batteries for just £99.
Image Credit (Trusted Reviews)
And when it’s time to store the blower away, there’s a handy hanging eyelet on the back.
Advertisement
Performance
Impressive power to weight ratio
Easy to handle and control
Not the highest air flow speeds
I measured the BGA 30 air flow at a maximum of 5.5m/s from 1m away. That’s a more gentle gust of air than larger leaf blowers with bigger batteries can do, but it’s still enough air flow for most typical garden jobs, from moving leaves and the like off a lawn, or clearing garden furniture of debris.
The BGA 30 offers a good power-to-weight ratio, so you can work without tiring yourself out too quickly. However, on full power, I only got around ten minutes working time, so it’s worth getting the version that comes with two batteries (or reusing batteries from other AS tools, such as the HSA 40 hedge trimmer or the RCA 20 Cordless Pressure Washer.
Because the handle is large and the ergonomics are great, it was easy to manoeuvre this leaf blower. With the nozzle tip removed, it’s even lighter and easier to direct the air flow to where you need it.
Advertisement
Another thing I like about this blower is that it’s quiet when you need to be. Unlike the harsh noise of the Ryobi RY18BLCXA-125, the BGA 30 is about as pleasant as a leaf blower can be. Running at just 64dB on low power and topping out at a manageable 81dB on high, it’s not going to annoy the neighbours too much.
The drawback of this blower is that it doesn’t reach the high air speeds of other, larger models. It’s ideally suited for small gardens, but those with larger spaces and more mess to deal with will need a more powerful blower.
Advertisement
Should you buy it?
Advertisement
You want a compact and relatively quiet leaf blower.
If the thought of a huge and heavy monster of a blower puts you off, get this one.
Advertisement
For all of it’s benefits, this small and highly portable blower lacks a bit of grunt. If you need to shift loads of leaves or work for long periods, the BGA 30 is not the right tool for you.
Final Thoughts
Like most Stihl garden tools, the BGA 30 has a thoughtful and ergonomic design. Light enough to use for long periods of time and running on the small but mighty AS battery system, it favours good handling over huge amounts of airflow, making it a good choice for smaller spaces; those who have larger gardens may prefer a more powerful model from our guide to the best leaf blowers.
Advertisement
How We Test
We test every leaf blower we review thoroughly over an extended period of time. We use standard tests to compare features properly. We’ll always tell you what we find. We never, ever, accept money to review a product.
Find out more about how we test in our ethics policy.
Tested with a variety of garden debris
We measure wind speed and air flow
FAQs
Which batteries does the Stihl BGA 30 use?
This leaf blower uses the AS system 10.8V batteries, compatible with a growing range of tools.
Maker Hyperspace Pirate has created a dive helmet using a 3D printer, tons of fiberglass, and a lot of ingenuity. They transformed an old diving concept into something that works, at least for shallow pool diving. This helmet is modeled like old surface-supplied diving gear. Air rushes in from above and exhaust leaves from below, keeping the diver’s head dry inside a little upside-down plastic bubble.
This project demands precise measurements, so Hyperspace Pirate originally sketched up the dimensions of the helmet on cardboard: 7.5 inches wide, 9.75 inches deep, and 11.25 inches high. Then Onshape software was used to generate a digital model of the object. It was divided into four separate components to accommodate the maker’s 3D printer, a Prusa MK3S, and manufactured with varying layer thicknesses to balance speed and strength. The printer used ABS filament, and after printing, the components were bonded together and encased in fiberglass soaked in epoxy for added strength. He had to be cautious about the sort of resin used because the other type tends to attack the ABS pieces.
High-Speed Precision: Experience unparalleled speed and precision with the Bambu Lab A1 3D Printer. With an impressive acceleration of 10,000 mm/s…
Multi-Color Printing with AMS lite: Unlock your creativity with vibrant and multi-colored 3D prints. The Bambu Lab A1 3D printers make multi-color…
Full-Auto Calibration: Say goodbye to manual calibration hassles. The A1 3D printer takes care of all the calibration processes automatically…
Three large transparent acrylic panes, one in the front and one on each side, provide visibility and are press-fitted into position and sealed with silicone caulk. The weight of the water at deep forces the windows in and closes them securely. A carry handle on top allows you to move the item about, and there are some useful small fittings for installing lighting or a camera.
Air enters through a small SAE fitting on the top of the helmet, which has a check valve to prevent air from flowing back in if the supply fails. Any extra air leaves at the back through a long, hollow PVC pipe, resulting in constant bubbles. The air supply is handled by a quiet oilless compressor, the MAC100Q type, which produces a consistent 40 liters per minute at up to 2 bar of pressure. This allows us to dive down to approximately 10 meters (33 feet) without running out of air. The rig is powered by a 12-volt, 35 amp-hour lead-acid battery connected to a 2 kilowatt pure sine wave inverter. It’s all mounted on a pool inner tube float, with a flat piece of plywood for stability and a handy diver-down flag.
Ballast weights, which are positioned on either side and held in place by a pair of large steel plates, work to keep the helmet underwater. We began with 30 pounds of weights, but after a few initial tests, we added an additional 10 pounds to achieve neutral buoyancy. A neoprene pad protects the neck against pressure points.
The helmet got a good workout in the pool, with dry runs ensuring proper fit and airflow, and underwater sessions allowing the builder to move around. We’ve had to be careful not to go too deep, partly because the bottom of the pool is a little uneven, but the airflow keeps it nice and cool and dry inside, preventing the windows from fogging or overheating. The compressor ran smoothly, and we were relieved that the helmet did not overheat. There was one peculiarity, however: the exhaust pipe would occasionally give out a small gurgling. It was a little unpleasant at the time, but it turned out to be harmless.
Safety has always been a key priority here, which is why the oilless compressor is a must-have. It means there is no risk of oil vapor or exhaust fumes entering the helmet. And just in case something goes wrong, we have a check valve to prevent the air pressure from decreasing quickly. Despite the fact that the helmet works extremely well for shallow water tasks, Hyperspace Pirate is quick to point out that this is still very much an experimental project, and it is not safe to use in open water or much deeper water without some serious modifications to make it waterproof, as well as a bit of backup air to be safe. [Source]
US self-driving startup Nuro, which is backed by the likes of NVIDIA, Toyota and Uber, has started testing its autonomous vehicles on Tokyo’s challenging streets, Bloomberg reported. The company, which plans to launch a robotaxi service with Uber and Lucid in San Francisco this year, will be testing a “handful” of vehicles in the city. Human safety drivers will be at the wheel, as is required by Japanese law.
Tokyo presents a challenge for autonomous vehicles, given its narrow, crowded streets and left side of the road driving. “Testing the capability of the autonomy system in such an interesting market with some international complexity really is a good pressure test of what the system is capable of,” said CEO Andrew Chapin. The company’s ultimate goal is to achieve Level 4 autonomy, which allows full self-driving under limited conditions.
Waymo is the other major robotaxi operator testing vehicles in Tokyo in collaboration with Japanese taxi operators Nihon Kotsu and the country’s leading taxi app, Go. It has been operating in the nation since April 2025 in collaboration with Toyota.
Nuro has yet to announce which operators or vehicle manufacturers it will be partnering with, but Chapin said it may not limit itself to autonomous rides. “A universal autonomy platform that can be extended to a lot of different applications and form factors is a bit different than the approach Waymo is taking,” he told Bloomberg. The company previously teamed with 7-Eleven on autonomous deliveries in Mountain View, California.
Advertisement
Uber plans to have up to 100,000 autonomous vehicles including 20,000 robotaxis powered by Lucid and Nuro, with a rollout starting in 2027. It introduced its new vehicle design recently at CES 2026. Uber is also collaborating with Nissan and Wayve with the aim to introduce pilot cars in Tokyo by late 2026.
Update: Story updated with a statement from Stryker confirming they suffered a disruptive cyberattack.
Leading medical technology company Stryker has been hit by a wiper malware attack claimed by Handala, an Iranian-linked and pro-Palestinian hacktivist group.
The medtech giant manufactures a range of products, including surgical and neurotechnology equipment. With over 53,000 employees, Stryker is a Fortune 500 company that reported global sales of $22.6 billion in 2024.
Handala says they stole 50 terabytes of data before wiping tens of thousands of systems and servers across the company’s network, forcing Stryker to shut down in “an unprecedented blow.”
Advertisement
“In this operation, over 200,000 systems, servers, and mobile devices have been wiped and 50 terabytes of critical data have been extracted,” the attackers said. “Stryker’s offices in 79 countries have been forced to shut down.”
Handala’s Stryker statement (BleepingComputer)
This aligns with reports from people claiming to be Stryker employees from the United States, Ireland, Costa Rica, and Australia, who said their managed Windows and mobile devices were remotely wiped in the middle of the night. The attackers have also defaced the company’s Entra login page to display a Handala logo.
A Stryker employee told BleepingComputer the incident began early Wednesday morning, when devices enrolled in the company’s mobile device management system were remotely wiped. The employee said colleagues who had personal phones enrolled for work access also lost data after their devices were reset.
Staff were instructed to remove corporate management and applications from their personal devices, including the Intune Company Portal, Teams, and VPN clients.
Numerous employees also report that the attack disrupted access to internal services and applications, forcing some locations to revert to “pen and paper” workflows after systems became unavailable.
Advertisement
As a result of the attack, Stryker is now working to restore their systems amid a global outage, as first reported by The Wall Street Journal.
“We are experiencing a severe, global disruption impacting all Stryker laptops and systems that connect to our network,” Stryker told employees in Cork, Ireland, according to local media.
“At this time, the root cause has not yet been identified. We are actively engaged with Microsoft and treating this a critical, enterprise-wide incident,” the company added in a message sent to employees in Asia.
Handala (also known as Handala Hack Team, Hatef, Hamsa) first surfaced in December 2023 as a hacktivist operation linked to Iran’s Ministry of Intelligence and Security (MOIS) that targets Israeli organizations with destructive malware designed to wipe Windows and Linux devices.
Advertisement
They are also known for stealing sensitive data from victims’ compromised systems and publishing it on the group’s data leak portals.
Stryker confirms cyberattack
After publishing this story, Stryker filed a Form 8-K with the SEC, confirming that it suffered a cyberattack that impacted its entire Microsoft environment.
“On March 11, 2026, Stryker Corporation (‘we’ or the ‘Company’) identified a cybersecurity incident affecting certain information technology systems of the Company that has resulted in a global disruption to the Company’s Microsoft environment,” reads the 8K filing.
“Upon detection, the Company activated its cybersecurity response plan and launched an investigation internally with the support of external advisors and cybersecurity experts to assess and to contain the threat.
Advertisement
“The Company has no indication of ransomware or malware and believes the incident is contained.”
Stryker says the incident will continue to disrupt its work environment, including access to network systems and business applications used in its operations, as it restores systems.
However, the company added that it doesn’t have a timeline for when everything will be restored.
Malware is getting smarter. The Red Report 2026 reveals how new threats use math to detect sandboxes and hide in plain sight.
Download our analysis of 1.1 million malicious samples to uncover the top 10 techniques and see if your security stack is blinded.