The Illinois House of Representatives passed a bill on Wednesday requiring frontier AI labs like OpenAI, Anthropic, and Google DeepMind to have their safety practices audited by a third party. If signed into law, AI safety experts tell WIRED, it would be the nation’s leading check on the power of major AI companies.

The bill, SB 315, now heads to governor JB Pritzker’s desk. In a post on social media on Wednesday, Pritzker said he plans to sign the bill, citing a need to hold Big Tech accountable.

Since Congress has yet to pass any meaningful AI safety legislation, state lawmakers have happily stepped up in recent years to promote bills that show their constituents they’re keeping Silicon Valley in check. As AI tools become increasingly popular, and the companies behind them race toward massive IPOs, polls show that American voters are looking for more AI regulation.

As a result, safety advocates and tech companies have zeroed in on state legislatures as the primary battleground to hash out how these laws should look. OpenAI’s chief of global affairs, Chris Lehane, told WIRED last week that the company’s AI policy is now oriented around passing a series of similar state laws.

California and New York have the strongest AI safety laws, requiring tech companies to provide information about model guardrails and to publish reports on safety incidents as they occur. Illinois’ bill goes a step further, requiring independent auditors to verify that an AI lab is adhering to its own safety standards. Previously, no independent body was required to keep an AI lab accountable to its own safety claims.

“We’re in a situation where the AI companies grade their own homework,” says Scott Wisor, policy director at Secure AI Project, a nonprofit that supports SB 315. “Should SB 315 become law, Illinois would require an independent auditor to check whether the AI labs in fact adhere to their safety commitments.”

Wisor says it’s broadly expected that, under SB 315, AI labs could use the Big Four accounting and auditing firms—Deloitte, EY, KPMG, and PwC—to audit their safety practices. He also says it’s possible that AI labs could tap members of the AI Evaluator Forum—a coalition of smaller research organizations including METR, Transluce, and Averi—to assess adherence to safety standards.

Illinois state representative Daniel Didech, a sponsor of SB 315, tells WIRED that state legislatures are playing an important role by shaping America’s AI policy and acting as a testing ground for any federal laws that might come in the future. “Laws like this create a world where it’s more likely for the federal government to pass something,” Didech says.

Corporate Interests

Illinois has emerged as a major arena in the ongoing fight over state AI laws. OpenAI previously supported a bill in Illinois that would let AI labs dodge liability if their models caused catastrophic harm. However, Lehane has since said the company’s blanket support for the bill was an oversight, and it never supported the liability shield in the bill. More recently, OpenAI endorsed SB 315.

“The Illinois General Assembly has shown real bipartisan leadership in advancing SB 315 and developing a thoughtful framework for frontier AI safety. As AI systems become more capable, clear expectations around safety, transparency, incident reporting, and accountability matter,” Lehane said in a statement to WIRED.

Virtualization

Hyperscalers can get hardware before enterprise vendors and buyers don’t much care where they land

Hyperscalers’ purchasing power means bare metal servers offered by major clouds can now be cheaper and easier to acquire than on-prem servers, according to Nutanix CEO Rajiv Ramaswami.

The CEO told The Register hyperscalers’ ability to buy servers and memory in bulk means they can often make infrastructure available faster than enterprise hardware players, and sees some customers who have previously preferred on-premises infrastructure heading for the cloud.

Ramaswami said he expects high memory and solid state storage prices will persist into next year and noted the impact of current price rises on the cost of servers.

“What that means for customers is they need to plan and budget carefully,” he said. “They pick servers on price and lead time” – and clouds often win on both metrics.

At the same time, Ramaswami said customers increasingly favor on-prem AI infrastructure to keep costs predictable. They want that because the CEO thinks AI remains “one of those things where people feel they have to do it” and return on investment is unclear.

“People are seeing incremental benefits,” he said, citing document search and summaries as the most common on-prem AI applications. Nutanix, he said, has measured a ten-percent improvement in service response times from using AI, while its developers are delivering new features 50 percent faster than before they used AI helpers.

Enterprise virtualization stacks like Nutanix’s products can require several hefty hosts to run. Ramaswami said he’s comfortable the footprint of his company’s products is not an issue for new buyers, but that he is also keenly aware that customers are looking for smaller hosts – and even servers running non-x86 processors.

For now, he doesn’t see sufficient appetite for Arm servers that Nutanix will devote developer time to porting its stack to that platform. But if demand comes, Ramaswami is confident it won’t be a major job as FOSS projects the company relies on – such as Kubernetes and the KVM hypervisor – already run on Arm silicon.

The CEO’s remarks came on the same day Nutanix reported its Q3 2026 results, which included news that the company won 730 new clients in the last quarter with Ramaswami saying “most moved from legacy vendors to us.”

That’s almost certainly a reference to VMware. Whether Nutanix is hurting its rival remains to be seen: pre-acquisition VMware had over 350,000 customers and now focuses on the top 10,000. Nutanix can pick up former Virtzilla users without disrupting Broadcom’s master plan.

Ramaswami said many new customers have taken advantage of Nutanix’s shift to allow use of external storage, a change from its previous insistence on using only its own software-defined storage. The CEO said the company scored a pair of seven-figure deals with companies that chose to continue using external storage from Everpure (formerly Pure Storage) and Dell, respectively.

Q3 revenue was $703 million, a ten percent year on year jump. Nutanix has always preferred to emphasize annual recurring revenue as a metric, and that rose 15 percent year over year to $2.43 billion.

Investors liked what they heard, sending Nutanix’s share price up a couple of points in after hours trading. ®

Don’t worry: It will keep your profiles and scrobbles.

Apple TV is bringing Patrick Brammall’s Australian thriller “Last Seen” to its growing lineup of serialized crime dramas with a global premiere set for later in 2026.

Apple shared a first look at the six-episode series on May 27, and confirmed “Last Seen” will debut globally on September 9, 2026. Patrick Brammall’s latest drama joins a growing lineup of weekly thrillers and crime series on the streaming platform.

Brammall stars in the adaptation of Ryan David Jahn’s award-winning novel “The Dispatcher.” Apple TV originally developed the project under the same title, before the shift to “Last Seen.”

“Last Seen” follows police detective Ian Ridley, whose daughter vanished 11 years ago without a trace. A distress call from a teenage girl convinces Ridley she may be Maggie and pulls him back into the search for his daughter.

Production took place in Victoria, Australia, with Kris Mrksa adapting the novel and serving as an executive producer. Emmy Award-nominated filmmaker Christian Schwochow directed and executive produced the series.

Alongside Brammall, the cast includes Maxine Peake, Brendan Cowell, Daniel Henshall, Jessica Wren, Zahra Newman, and Chloe Jean Lourdes.

Thrillers remain a major focus for Apple TV

Crime dramas and serialized thrillers continue occupying a prominent place in Apple TV’s original programming slate. Recent releases and renewals have kept the service closely associated with prestige dramas built around recognizable actors and weekly release schedules.

Prestige originals including Best Picture winner “CODA” helped establish Apple TV as a destination for high-profile original programming. Acclaimed spy dramas and breakout science-fiction series have continued pushing the streaming service deeper into prestige television.

The $2,999 JMGO N3 Ultimate is a 4K laser projector that’s pricey, but delivers easy placement, paired with excellent video quality. Too bad it’s badly let down by Google TV software.

Most projectors assume you can put them exactly where they need to be. Real living rooms rarely work that way.

The usual fix is digital keystone correction, which electronically adjusts a skewed image to look straight. It works, but it costs you resolution and brightness in the process.

The N3 Ultimate is built around avoiding that trade-off entirely. JMGO calls its combination of placement tools the 3-in-1 system, and it takes a different approach to each part of the problem.

We previously reviewed JMGO’s N1S Ultra, which delivered excellent picture quality but left us wanting more from its smart TV software and speaker output. The N3 Ultimate sits higher in JMGO’s lineup and addresses several of those sticking points.

Not all of them, though.

JMGO N3 Ultimate review: Specifications

All of this adds up to a very capable projector on paper. And fortunately, the combo delivers, with one notable exception.

JMGO N3 Ultimate review: Physical design

The N3 Ultimate measures 12.1 by 9.1 by 10.8 inches and weighs 15.3 pounds. That is a significant unit, but not an immovable one.

The most distinctive physical feature is the gimbal head, which houses the lens and rotates independently from the base. This is what lets the projector stay on a flat surface while pointing at a wall or ceiling without physically moving the whole unit.

JMGO N3 Ultimate review: Unboxing from quite sturdy packaging.

Advertisement

The body is built from aluminum, which helps keep things cool given the powerful laser light source inside. It is clearly a living room piece rather than something you’ll move around often.

Around the back are two HDMI 2.1 ports, one of which supports eARC (which allows the projector to send audio back out to a connected sound system without a separate cable), plus a USB 3.0 port. Wi-Fi 6 and Bluetooth 5.2 handle wireless connectivity.

The built-in speaker system is 25W total across two channels. Noise output is rated below 26dB during operation.

JMGO N3 Ultimate review: The 3-in-1 placement system

The N3 Ultimate’s central selling point is how it handles placement. It tackles this in three ways.

The first is the optical zoom, which covers a 0.88 to 1.7:1 throw ratio. In practical terms, a 100-inch image can be produced from as close as roughly seven feet or as far as around fourteen, without affecting image quality.

The second is dual-direction lens shift, which moves the image up, down, left, or right by up to 130% vertically and 53% horizontally. Crucially, this is a purely optical adjustment, unlike digital keystone correction, so there is no loss of resolution or brightness.

JMGO N3 Ultimate review: Sensors to manage the image

The third is the AI gimbal, which JMGO claims is a first for the US market. It rotates the projector head automatically, letting it point at a different wall or the ceiling without the user touching the unit.

All three work together under JMGO’s Optical Image Optimization system. A single button press triggers automatic screen fitting, focus, keystone correction, and obstacle detection at the same time. A feature called AI Spatial Memory then stores those setups, so the projector can switch between surfaces without needing to recalibrate each time.

Use the automatic system. Manually doing it from the remote is fussy, and you will ultimately get frustrated by the process.

JMGO N3 Ultimate review: Image quality

The light source is a tri-color RGB laser, which JMGO calls MALC 5.0. It is the latest version of the same system used in the N1S Ultra we reviewed previously, with improved brightness and color figures.

The system is decent, with it minimizing speckling. There’s still the occasional rainbow effect at play.

Rainbow effect is a visual aberration. Not everyone is sensitive to this effect. Some users, including two of the five viewers on our panel, can see this on other projectors as flashes of red, blue, and green color during high-contrast scenes, or action shots.

In short, it’s a slight strobing around movement.

JMGO N3 Ultimate review: Front lens and sensor array.

Our five-person testing panel watched a bunch of action movies, as they seem to show off and challenge projectors the most. With some other lower-end projectors, our testers saw the rainbow effect in a Star Wars fighter battle, and so forth.

One of our two testers saw the rainbow effect while watching the latest Dune movie. The other didn’t see it on Dune, but did see it in Star Wars: Andor‘s escape from the prison, as the escapees jumped into the water.

Good enough.

Output is rated at up to 5,800 ISO lumens. That is more than double the N1S Ultra’s 2,800 lumens, which is a meaningful jump for use in rooms with ambient light.

Contrast is rated at 20,000:1 using FOFO measurement (a standardized method that measures contrast in real projection conditions, rather than in a darkened test environment). This is supported by AI Dynamic Black processing and Shadow Detail Enhancement.

Color coverage is 110% of the BT.2020 standard, with a color accuracy rating of Delta E approximately 0.7. A Delta E below 1.0 is generally considered reference-grade, so this figure is impressive on paper.

Our AV expert brought his hardware over to the house to test the claims. The claims matched up with reality, with the expert measuring a more reasonable 0.8 Delta E in practice.

Still, this varies in testing environments. Like hard drive speeds in the real world not matching up with manufacturer’s claims, this is close enough.

HDR support covers Dolby Vision and HDR10. However, while Dolby Vision seems perfect, support for the plainer HDR10 support is a little off when it comes to color on both Google TV and a connected Apple TV set-top box. Our AV expert didn’t have an answer for why, but said that it “was still reasonable” in a unit at this price point.

From a regular viewer’s standpoint, this isn’t terrible. It is noticeable if you’re viewing something that does not support Dolby Vision.

The image can scale from 40 inches up to 300 inches. This is a good range, especially if you want to watch on a big screen and you happen to have a clear side of your home available for outdoor viewing.

JMGO N3 Ultimate review: Smart features and software

The N3 Ultimate runs Google TV with native Netflix support. It has 4GB of RAM and 64GB of storage, which is generous for a projector.

When we reviewed the N1S Ultra, Google TV’s performance on JMGO’s hardware was a weak point. The MT9679 chip is used again here, so the same limitations apply.

For Apple users, the N3 Ultimate supports AirPlay, allowing iPhones and Macs to stream or mirror content directly to the projector without extra hardware. The Apple TV app is also available via Google TV.

JMGO N3 Ultimate review: Rear ports.

For a cleaner Apple experience overall, pairing with an Apple TV box via one of the HDMI 2.1 ports remains the recommended approach, as it was with the N1S Ultra.

AI features include automatic screen fitting, focus, keystone correction, obstacle avoidance, eye protection, and wall color adaptation. The AI Spatial Memory system can store multiple projection setups, including position, image size, and the last-used app, for quick switching between surfaces.

Calling all this “AI” is marketing, and not much else. A few years ago, it’d have been called “computer vision” or the like.

And, we hooked up an Xbox Series X to the N3 Ultimate. Input lag is rated at 1ms, and it supports Variable Refresh Rate (VRR) that synchronizes the projector’s frame output with the console or PC for smoother motion. It also has up to a 240Hz refresh rate, but at a lower resolution that max.

A dedicated Pro Game Mode is also available. These figures are competitive with dedicated gaming monitors, which is unusual for a projector. Our test group liked the feature, and compared it positively to the 120Hz 4K display that I have on my desk.

PlayStation 5 and Xbox Series X users benefit from VRR directly over the HDMI 2.1 connections. Apple TV 4K users pairing via HDMI will also see a responsive, low-lag connection.

Upscaling of retro consoles is better handled by an emulator or an external box, though, if that’s your thing.

JMGO N3 Ultimate review: Audio

The N3 Ultimate has a 25W stereo speaker system with Dolby Audio and DTS-X support. That is a step up from the N1S Ultra’s 20W setup in name, though the configuration differs.

As with just about every projector’s speaker systems, whether this is adequate for your large-screen setup is something only hands-on use will confirm. We didn’t like it, and preferred our own Dolby Audio solution.

As was the case with the N1S Ultra, external audio is probably what you want. A soundbar or, for Apple users, a receiver with external speakers or a full-sized HomePod paired in low-latency mode via Apple TV, makes the most of what the projector can deliver.

JMGO N3 Ultimate review: A more complete package

The N3 Ultimate builds directly on what JMGO established with the N1S Ultra. The picture is substantially better, the placement system is more flexible, and the gaming credentials are genuinely competitive with screens.

The 3-in-1 system is a real differentiator. For users who cannot mount a projector to a ceiling, or who want flexibility in how they use a room, the ability to repoint the projector automatically without losing image quality is worth paying for.

JMGO N3 Ultimate review: A decent home cinema projector.

At a MSRP of $2,999, it is a premium product. It is priced for people who want the best image they can get in a living room context, and who value placement flexibility alongside it.

That Google TV, though, is awful. It’s slow, it’s not very responsive, and it’s janky. All of this is not JMGO’s fault, and Google might be able to make it better. Eventually. Maybe.

But, Google is on Google TV 5.0, though. You’d think they’d have fixed it by now.

Apple users will find it integrates well with an Apple TV or Mac mini in the chain. It is clearly not an Apple product, but it is a good projector for one.

JMGO N3 Ultimate Pros

• 3-in-1 lossless placement system
• Significantly improved brightness over previous models
• Competitive gaming specs

JMGO N3 Ultimate Cons

• Premium price
• Google TV performance is very bad
• Onboard audio is a bit weak, and should be replaced with another solution

Rating: 4 out of 5

I liked the JMGO N1S Ultra. I like the N3 more, but I still hate Google TV.

AirPlay to the unit natively isn’t enough. Hook it up to an Apple TV with HDMI, and that removes most of the friction of the product for Apple users.

Where to buy the JMGO N3 Ultimate

The JMGO N3 Ultimate is available from Amazon, currently discounted to $2,399 from $2,999.

Ever wondered why fan manufacturers think three speed settings are enough, when what you actually want is the difference between “barely there” and “I can finally sleep” that only proper granular control can deliver?

Most fans force you to choose between a breeze that does nothing and a roar that drowns out everything else, and the gap between those two extremes is where summer nights get genuinely miserable for anyone who runs warm.