Connect with us
DAPA Banner

Tech

OpenAI’s new $100 ChatGPT Pro plan targets Claude Max with five times the Codex access

Published

on

In short: OpenAI launched a new $100 per month Pro plan for ChatGPT on 9 April 2026, inserting a new tier between the existing $20 Plus plan and the $200 Pro plan and directly targeting Anthropic’s Claude Max, which is also priced at $100 per month. The new plan offers five times more Codex usage than Plus, access to the same model suite as the $200 tier, and a launch promotion that temporarily doubles that advantage: through 31 May 2026, subscribers get ten times the Codex usage of Plus. The move follows Codex crossing three million weekly users on 8 April, a growth rate the company describes as a 5x increase in three months.

What the $100 plan includes, and where it sits in ChatGPT’s pricing structure

The new plan is the sixth pricing tier in ChatGPT’s current structure, which now runs from a free account with advertising, through a $8 per month Go plan, the $20 per month Plus plan, to two versions of Pro at $100 and $200 per month, a $25 per user per month Business plan, and custom-priced Enterprise contracts. The $100 Pro plan sits directly between Plus and the existing $200 Pro tier, offering five times the Codex usage of Plus and targeting what OpenAI describes as “longer, high-effort Codex sessions” that Plus subscribers hit the ceiling on. The $200 Pro plan, by comparison, provides 20 times the Codex usage of Plus, making it four times more Codex-intensive than the new $100 tier.

Despite the difference in usage limits, both Pro tiers give access to the same model suite: the exclusive GPT-5.4 Pro model, unlimited use of GPT-5.4 Instant and GPT-5.4 Thinking, and all other features available on the $200 plan. The differentiation between the two tiers is usage volume, not capability. As a launch promotion, subscribers to the new $100 plan will receive ten times the Codex usage of Plus through 31 May 2026; after that date, the standard five times limit applies. OpenAI also announced a rebalancing of the Plus plan’s Codex allocation alongside the new tier, shifting Plus towards steadier day-to-day usage rather than allowing the longer burst sessions that the $100 plan is intended to serve.

Codex demand: the numbers that prompted the new tier

On 8 April 2026, the day before the $100 plan was announced, Sam Altman posted on X that OpenAI was resetting Codex’s usage limits across all plans “to celebrate 3M weekly codex users,” and committed to repeating the reset for every additional million users until Codex reaches ten million weekly users. Thibault Sottiaux, who leads the Codex product, stated: “Three million people are now using Codex weekly, up from two million a little under a month ago.” OpenAI described the growth trajectory as a 5x increase in the preceding three months, with 70% month-over-month user growth.

Advertisement

The 💜 of EU tech

The latest rumblings from the EU tech scene, a story from our wise ol’ founder Boris, and some questionable AI art. It’s free, every week, in your inbox. Sign up now!

The scale of that growth reflects a shift in how developers are using AI coding tools. OpenAI rolled out a dedicated Codex app for macOS in February 2026, designed to move beyond line-by-line code generation into what the company called agentic, multi-task coding workflows: orchestrating multiple agents in parallel, running background jobs, and handling instructions that span hours rather than seconds. That architecture, with its longer-running sessions and heavier compute demands, is precisely the usage pattern that the $100 plan is priced to capture. A Plus subscriber who uses Codex for extended autonomous engineering tasks hits usage limits well before their billing cycle ends; the $100 plan is designed to be the next logical tier rather than a jump to $200.

The Claude Max comparison

OpenAI made no attempt to obscure the competitive framing. The new plan is priced identically to Anthropic’s Claude Max 5x tier, which also costs $100 per month and includes elevated limits for Claude Code, Anthropic’s terminal-based agentic coding product. Claude Code has become the fastest-growing part of Anthropic’s commercial portfolio, with an estimated $2.5 billion in annualised revenue by early 2026, and Anthropic has been constructing a developer ecosystem around it: Anthropic launched a marketplace for Claude-powered enterprise software in March 2026, with launch partners including Snowflake, Harvey, and Replit, connecting enterprise buyers with third-party applications built on Claude.

Advertisement

The competitive dynamic sharpened further in the week before OpenAI’s announcement. On 4 April 2026, Anthropic banned third-party agents from Claude Pro and Max subscriptions, preventing subscribers from routing their plan’s usage limits through external frameworks such as OpenClaw; users wanting to continue using those tools must now pay separately under a new per-session “extra usage” system. OpenAI’s announcement went in the opposite direction, increasing Codex availability at the $100 price point and doubling it temporarily to mark the launch. The contrast, at the identical price, was visible enough that most coverage described the new plan as a direct response to Anthropic’s developer subscriber base.

What OpenAI’s pricing move signals

The new tier arrives during a period of accelerating commercial momentum for OpenAI. OpenAI’s $122 billion raise at an $852 billion valuation, completed in March 2026, was led by SoftBank, NVIDIA, and Amazon, and included $3 billion from individual retail investors, a structure that many analysts read as groundwork for an IPO expected as early as the fourth quarter of 2026. The company is generating $2 billion in revenue per month and has more than 50 million paid subscribers across its plans. The $100 plan is part of a deliberate effort to fill the pricing gap between $20 and $200 that had, until now, left a large segment of heavy but not enterprise-grade users without a compelling upgrade path.

The model powering the Pro tiers, GPT-5.4, which launched in March 2026 and introduced native computer use directly into Codex and the API, is the clearest statement of where OpenAI sees the next phase of developer adoption going: not prompting, but autonomous agents operating software, navigating file systems, and running multi-step workflows across applications for hours at a time. The $100 plan is the pricing expression of that bet. Whether it moves enough developers at the $100 Claude Max price point to make a measurable difference in Anthropic’s subscriber base will be visible in both companies’ next quarterly metrics.

Advertisement

Source link

Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

Intel and SambaNova just built a three-chip AI machine that splits work between GPUs, RDUs, and Xeon

Published

on


  • GPUs handle prefill operations by converting prompts into key-value caches
  • SambaNova RDUs generate tokens at high throughput and low latency
  • Intel Xeon 6 processors manage workload distribution and execute compiled code

Intel and SambaNova Systems have introduced a joint hardware blueprint combining GPUs, SambaNova RDUs, and Intel Xeon 6 processors for large-scale inference workloads.

The system assigns GPUs to prefill operations, RDUs to decoding, and Xeon CPUs to execution and orchestration tasks across agent-driven environments.

Source link

Advertisement
Continue Reading

Tech

Amazon laid off 30,000 workers while CEO Andy Jassy got a 30% pay bump

Published

on


Amazon published its annual proxy statement yesterday, revealing Jassy’s compensation for last year.
Read Entire Article
Source link

Continue Reading

Tech

Green Powered Challenge: Solar Powered Pi Hosts Websites In RAM

Published

on

If you started with computers early enough, you’ll remember the importance of the RAMdisk concept: without a hard drive and with floppies slow and swapping constantly, everything had to live in RAM. That’s not done much these days, but [Quackieduckie]’s solar powered Pi Zero W web server has gone back to it to save its SD card.

Sustainability and low power is the name of the game. Starting with a Pi Zero W means low power is the default; a an SLS-printed aluminum case that doubles as the heat sink– while looking quite snazzy–saves power that would otherwise be used for cooling. The STLs are available through the project page if you like the look and have a hankering for passively cooled Pi. Even under load [Quackieduckie] reports temperatures of just 29.9°C,  less than a degree over idle.

The software stack is of course key to a server, and here he’s using Alpine Linux running in “diskless mode”– that’s the equivalent of what us oldsters would think of as the RAMdisk. That’s not that unusual for servers, but we don’t see it much on these pages. It’s a minimal setup to save processing, and thus electrical power, with only a handful of services kept running: lighttpd, a lightweight webserver, and duckiebox, a python-based file server, along with SSHD and dchron; together they consume 27 MB of RAM, leaving the rest of the 512 MB DDR2 the Pi comes with to quickly serve up websites without the overhead of SD card access.

As a webserver, [Quackieduckie] tested it with 50 simultaneous connections, which would be rather a lot for most small, personal web sites, and while it did slow down to an average 1.3s per response that’s perfectly usable and faster than we’d have expected from this hardware. While the actual power consumption figures aren’t given, we know from experience it’s not going to be drawing more than a watt or so. With a reasonably sized battery and solar cell– [Quackieduckie] suggests 20W–it should run until the cows come home.

Advertisement

This isn’t the first solar-powered web server we’ve seen, but this one was submitted for the 2026 Green Powered Challenge, which runs until April 24th.

Source link

Advertisement
Continue Reading

Tech

The Complex Transformations Underlying MC Escher’s Works

Published

on

Self-similar images are rather common, which are images in which the same image is repeated on a smaller scale somewhere within the image that one is looking at, something which is also referred to as the Droste effect. Yet in [MC Escher]’s 1956 Prentententoonstelling (‘picture gallery’) drawing, this self-similar image is somehow also the foreground image, from where it just keeps looping around in an endless dance. How this effect is accomplished and what the mathematical transformations behind it are and how they work is explained in a recent video by [3Blue1Brown].

The video uses previous work by [B. de Smit] and [H. W. Lenstra Jr] whose 2003 paper detailed the underlying transformations, as well as the mystery of the center of the work.

Although [MC Escher] created a transformation grid with square rectangles into which a non-transformed image could be copied verbatim, he left the center as a void with just his signature in it, leaving many to guess how one might be able to fill in this area with something that made sense. In the work by [Smit] et al. it was postulated that by treating the work as having been drawn on an elliptic curve over a field of complex numbers this might be possible.

While the transformation is simple enough at first, with just four rectangles at different zoom levels to make up the corners, the trick is to connect these rectangles. Using the demonstrated complex method this can be automated, with the central void now filled in and creating its own Droste effect. This once again demonstrates the beautifully complex mathematics in [Escher]’s works, despite him never having had any formal mathematical education.

Advertisement

Source link

Advertisement
Continue Reading

Tech

Best 2-in-1 Laptops (2026): Microsoft, Lenovo, and the iPad

Published

on

There will always be a use case for owning both a laptop and a tablet as stand-alone products. But the 2-in-1 laptop is the utopian dream of combining these two into a single device.

Of all the models I’ve tested, no 2-in-1 laptop is equally good at being both a tablet and a laptop. They always lean toward one or the other. But that doesn’t mean you shouldn’t buy one, especially since the convenience of having both in one device makes it an easier pill to swallow, price-wise.

The products below should meet most people’s needs. But if none are a fit for you, check out our other computer buying guides, including the Best Cheap Laptops, the Best Tablets, and the Best iPad.

Table of Contents

Advertisement

Detachable Tablets

Microsoft

Surface Pro 13-inch (11th Edition, 2024)

If you want a 2-in-1, think first about a detachable tablet. These are basically tablets that attach to a keyboard. This form factor emphasizes being able to switch between tablet and laptop modes. It’s just as functional as a tablet as it is as a laptop. The Surface Pro is the epitome of this design, pioneering the idea of a tablet with a built-in kickstand that runs a full version of Windows.

Advertisement

Microsoft has refined the hardware over the years, but it wasn’t until the 2024 model that it came into its own. That’s largely thanks to the Qualcomm Snapdragon X Elite (and Plus) processor, which finally gave the device an appropriate amount of performance and battery life. While it’s not cheap (especially once you include the Type Cover), I love that you can now use the keyboard while detached from the screen, making it even more adaptable in scenarios away from a desk. To compete with the iPad Pro, there’s even an OLED model (with 120-Hz refresh rate) available, which really brings visuals on the display to life.

Last year, Microsoft came out with a smaller and more affordable model, the Surface Pro 12. This is the most successful small tablet Microsoft has ever made, and a big reason is because it doesn’t cheap out on quality or shrink down the size too much. With a 12-inch screen, it still allows the keyboard to be large enough to be comfortable typing on. It doesn’t have the option for an OLED screen, but this is still a surprisingly premium-feeling device that is even more portable than its older sibling.

Not only is the Surface Pro 12 cheaper overall, it’s also the only 256-GB storage model on offer. Because Surface devices run a full version of Windows, they are the best 2-in-1 devices to use as full laptop replacements. While the hardware is there to make for a good tablet, Windows isn’t so friendly with touch and doesn’t have a touch-first app ecosystem to support it. That’s where iPads come into play.

The iPad Air and iPad Pro are the best tablets you can buy, largely thanks to the breadth of touch-first apps available in the App Store. In many ways, that’s what makes an iPad such an ideal 2-in-1 laptop, especially if you actually want to use it as a tablet. They are also easier to hold in one hand, as they are lighter than the Surface devices. These days, these iPads are increasingly legitimate laptop replacements too. With the Magic Keyboard attachment, you can add an additional USB-C port and a full-size keyboard and trackpad. I like that this design doesn’t rely on a kickstand either, which makes it easier to use on your lap than the Surface.

Advertisement

iPadOS still isn’t perfect, but with the introduction of windowing and better cursor support, they work as laptops better than ever. The latest model I tested, the M4 iPad Air, is immensely powerful, and with the Magic Keyboard attached, it’s a really solid 2-in-1 laptop that comes in cheaper than the Surface Pro with the keyboard included. It’s plenty of performance for just about anything you’d want to do with an iPad, especially if you opt for the larger 13-inch model. My only real complaint is that the palm rests on the Magic Keyboard are quite small.

Source link

Continue Reading

Tech

Historic China-Europe Space Mission Hopes To Collect Pivotal Data Never Seen Before

Published

on





There are now thousands of satellites orbiting Earth, but there’s still a surprisingly basic thing we haven’t yet targeted well. The Earth is often bombarded with solar storms, but so far, we’ve yet to observe the planet’s magnetic field respond to them in real time. Now, a spacecraft built jointly by China and Europe is on the verge of doing just that. The spacecraft is launching as part of SMILE, which stands for Solar wind Magnetosphere Ionosphere Link Explorer.

The venture is the first comprehensive, mission-level space science partnership between the Chinese Academy of Sciences and the European Space Agency. That includes designing, building, and operating the whole thing. The collaboration actually traces back to 2015. That’s when ESA and CAS put out a joint call for mission ideas. SMILE was picked from 13 proposals and entered its study phase a decade ago, in early 2016.

Advertisement

Once SMILE launches, it will head for an unusually elliptical orbit that will swing from just 5,000 kilometers over the South Pole to a whopping 121,000 kilometers above the North Pole. The point of the wider arc is to give the instruments a better vantage point for watching how solar wind slams into Earth’s magnetosphere. That’s important because when that interaction is strong enough, it can trigger geomagnetic storms, which can sometimes be dangerous. Moreover, solar storms can even be a problem for satellites in low-Earth orbit.

Scientists currently have a decent understanding of how the interaction takes place. But the picture is incomplete. There are existing missions like the NASA MMS and the ESA-NASA SOHO spacecraft built for similar purposes. But they’re designed for individual events affecting localized areas, rather than a broad global perspective.

Advertisement

What SMILE aims to learn

Since none of the existing solutions can show the full picture at once, SMILE is designed to fill in this gap. It features a soft X-ray imager, which will map the boundaries of the magnetosphere globally for the first time. The goal is to watch how Earth’s magnetic shield changes shape when solar eruptions pass by.

Better observations could also help predict geomagnetic storms before they hit. Some of these storms are powerful enough to disrupt satellite navigation and radio communications around the world. The last notable one, which hit in May 2024, did just that. Then there was the much worse one from back in 1989, which actually knocked out Quebec’s entire power grid for nine hours, leaving millions without electricity. It’s a reminder of why solar storms affect power grids in the first place. Problems like these can be prevented with better forecasting, as they would give operators time to shut down vulnerable systems in advance.

That said, as is often the case with ambitious space missions, SMILE has run into some snags. It was supposed to lift off on April 9 from Europe’s spaceport in French Guiana. However, ESA announced that the launch had been postponed due to a technical issue on a subsystem component production line. As of writing, we don’t have a new launch date yet.

Advertisement



Source link

Advertisement
Continue Reading

Tech

Trying To Install Haiku On A 2009 Mac Mini

Published

on

Although the number of uses for a 2009-era Mac Mini aren’t very long, using them to run new-and-upcoming operating systems like Haiku on would seem to be an interesting use case. This is what [The Phintage Collector] recently took a swing at, using both the 2024 Beta 5 release and a current nightly build. The focus was mostly on the 32-bit build, as this has binary compatibility with BeOS applications, but the 64-bit version of Haiku was of course also installed.

One of the main issues with these Mac systems is that they use EFI for the BIOS, so you’re condemned to either take your chances with the always glitchy CSM ‘classical BIOS’ mode, or to make Haiku and EFI get along. While for the 64-bit version of Haiku this wasn’t too much of a struggle, the 32-bit version ran into the problem that the 64-bit EFI BIOS really doesn’t like 32-bit software. After a while the 32-bit version of Haiku was thus abandoned for a later revisit.

With the 64-bit version a lot of things just work, though audio couldn’t be made to work even with a USB dongle, and there’s no hardware acceleration for graphics, so gaming isn’t really going to happen either. The positive thing here is probably that as a test system for 64-bit Haiku such a Mac Mini isn’t too crazy, it being just an Intel system with an Apple-flavor EFI BIOS.

Advertisement

If you’re into giving it a shot yourself, the video description page contains a lot of resources to consult.

Advertisement

Source link

Continue Reading

Tech

DDR5 prices drop nearly 30%, but memory costs are still far from normal

Published

on


The spot price of a 16GB DDR4 chip has reportedly fallen by around 5% to $74.10 over the past month, following more than a year of unrelenting increases. This modest correction marks the first monthly decline in DRAM spot pricing since the rally began in early 2025, when a 16GB…
Read Entire Article
Source link

Continue Reading

Tech

7 Of The Best Harbor Freight Deals In April 2026

Published

on





Harbor Freight has used deals to get people in the door since the company’s inception. April 2026 is no exception, as the store is celebrating a few sales, including its Spring Black Friday sale over the first couple of weeks of the month, additional coupon deals that are available, various brand deals, and special deals for the company’s Inside Track members. All told, there are more than a few hundred items on sale, which is a lot to keep up with. It takes hours to scroll through that many deals to see if any of them are any good. 

That’s precisely why we went ahead and did just that and then posted the best deals we could find below. They are a mixture of all the deals seen above, excluding the store’s Dollar Days deals since they’re mostly odds and ends that are lightly discounted. The list below also only contains items that are at least 25% off and consist of things we think might be helpful around the house, garage, or workshop. Harbor Freight sells all kinds of niche and obscure tools, so if you need them, some are on sale as well. 

Advertisement

Many of these deals finish up by mid-April, so if you’re reading this later, you may want to check again for a fresh set of deals, as most will have expired by then. Good luck and happy shopping. Should none of the deals below appeal to you, you can find the full list of deals here.

Advertisement

Bauer 1,800 PSI Portable Pressure Washer

The Bauer 1,800 PSI Portable Pressure Washer is a pretty decent tool for light power washing work around the homestead. It boasts 1.2 gallons per minute (GPM) of flow, which doesn’t quite stack up to industrial strength power washers, but is more than good enough for DIY stuff at home. Bauer says this electric power washer is best used for cleaning patio furniture, barbecues, bikes, campers, and other stuff, and it should stack up well with competitors for car cleaning. It should also be strong enough to clean the actual patio itself and other similar tasks. It’s also relatively small, making it easier to store when you’re done. 

The power washer is on sale for $70, down from its typical $100 price tag, which means it’s 30% off until mid-April. For the money, you get a reasonably competent pressure washer that comes with three quick-connect nozzles that includes one for soaping, a 15-degree wide-area nozzle, and a high-power nozzle. You also get a 35-foot power cord with GFCI protection, and a 20-foot hose that can also be used with soap. Everything can be stored on the device itself, and it weighs a total of 14.8 pounds, which is light enough to carry around. 

Current owners seem to like it as well. Bauer’s pressure washer scores a 4.6 rating with 197 customer reviews. Owners say you may have to buy a replacement nozzle every now and then, but otherwise, the machine works as described and works best for small tasks.

Advertisement

U.S. General Magnetic Paper Towel Holder

Having a clean roll of paper towels handy is imperative for any garage or workshop, and the U.S. General Magnetic Paper Towel Holder can solve the problem of having paper towels readily handy without breaking the bank. This one is quite simple. It comes in two pieces that each have powerful magnets. You affix them to virtually any toolbox or some other metal surface at the correct distance, and then you hang a roll of paper towels on it. U.S. General says this design helps accommodate any width for paper towels, so no need to buy special ones just for this holder.

The magnetic paper towel holder is on sale for $10, which is 33% off of its usual $15 price tag. This one is for Inside Members only and the deal expires on April 30. It comes in nine colors, including some pretty bright ones in case you want to match your decor or place it somewhere inside the house. U.S. General says that the magnets are rubber coated, so it won’t damage the surface if it happens to slide around. Each magnet is rated to hold two pounds, which is more than enough for a paper towel holder. 

Advertisement

Customers have few negative things to say about it. It has a 4.9 rating with nearly 5,000 reviews, and if it had a chronic issue, it probably wouldn’t have such stellar review numbers. Owners praise it for doing what it’s supposed to do, and that’s about all anyone says about it.

Advertisement

Predator 3500-Watt Inverter Generator

There are benefits to keeping a generator around, up to and including having power during an outage or having power while camping. The Predator 3,500-Watt Inverter Generator is a reasonable pickup for folks looking for a backup plan. Predator’s generator includes two 120-volt 5-20R outlets, which are your standard three-prong house outlets. It also comes with a 120-volt L5-30R twist-lock outlet, and one 12-volt DC plug. It won’t have enough electricity to power your entire house, but it should be more than enough to keep your fridge, freezer, and a few lights going until the power comes back on. 

Harbor Freight is selling this one for $600, which is $200 off of its list price, or about 25%. It’s expensive, but generators often are. Predator says that the best use for this is for powering RVs and campers, and even comes with an RV adapter. It runs at 56 dBA, which is reasonably quiet, and it can run for over 11 hours at 25% capacity. There are also automatic shutdowns in case a harmful amount of carbon monoxide is detected. Even so, you shouldn’t use this indoors ever. 

Despite its higher price tag, there are still plenty of customer reviews. This inverter generator scores a 4.7 out of 5 rating with 755 total reviews. Customers note that it works best for camping applications, as a temporary backup for homes, and even on some jobsites. Users also enjoy the push-button start

Advertisement

Bauer 15-Amp Cut Off Saw

There are tons of uses for a saw, and there are many saws for various occasions. You can check one of them off the list with the Bauer 15-Amp Cut-Off Saw. This little guy mounts to a work surface with a vise, and then you can use its 15-amp, 3.8-horsepower motor to cut through a bunch of different things. Bauer says it’s designed for metal use, but also works for drywall track, angle iron, conduit, piping, tubing, and rebar. It also comes with features such as a depth stop for more precise cutting, a 45-degree miter angle, and a vise that holds material in place while you cut.

This one is on sale with a coupon, so you won’t see the sale if you go to the product listing. Instead, you’ll need to head to Harbor Freight’s coupon webpage and find it there. The coupon brings the price down to $120, which saves you 25%. The saw is otherwise pretty simple. It plugs into the wall and cuts stuff. It’s not the most powerful saw on the market, but for basic DIY use, it’s more than good enough. It also has a 4.5-star rating with nearly 300 reviews, so people tend to like what it offers. 

Advertisement

Even if you don’t go for the saw, the link above to the coupon webpage is worth your time to check out, since those sales aren’t listed on the product webpages.

Advertisement

Pittsburgh 6,500 lb. Portable Ramp Set

It’s generally recommended to have something more reliable than a floor jack when working on a car. Car ramps and jack stands do the trick nicely, and Harbor Freight had jack stands on sale last month. This month, the store has the Pittsburgh 6,500 lb. Capacity Portable Ramp Set on sale. This is a pretty simple product. You get two ramps, each of which is capable of holding up to 3,250 pounds of weight while you do something like change your car’s oil. The ramps offer six inches of lift, which isn’t as much as a jack stand, but it’s close enough for basic maintenance tasks. 

The ramps are on sale for $40 and retail for $60, for a 33% savings. Pittsburgh says that it can support vehicles with a gross vehicle weight rating (GVWR) of up to 13,000 pounds, which should handle just about every car a consumer can own, including some of the heaviest ones known to exist. It also helps that Harbor Freight car ramps have a decent reputation, making it a solid purchase.

For reference, these are not made for loading things into vehicles. However, if you are in the market for something like that, Harbor Freight has the Haul-Master Steel Loading Ramps on sale for $50, 41% off the list price of $85. They support 1,000 pounds and work with trucks, trailers, and vans.

Advertisement

Doyle 4.5-inch Swivel Vise

Vises are one of those things you may have seen in your parents’ garage that was there before you were born and will be there until the garage collapses. Harbor Freight has such an item on sale right now with the Doyle 4.5-inch Swivel Vise. This is a simple tool that does one thing really well, which is to hold something in place while you polish, cut, or otherwise work on it. The base screws into the work surface for extra stability, and steel jaws are replaceable, so you can keep using it without having to replace the entire contraption. The base also swivels, which, while niche, can be useful from time to time. 

This vise is on sale at Harbor Freight for $100, which is 33% off of its $150 price tag. It seems like a lot, but these types of vises can last for decades with proper care, and potentially even longer since this tool has a lifetime warranty from Harbor Freight, like most of the brand’s hand tools. It also weighs 39 pounds, so the screw holes to secure it to your work surface are likely necessary to keep this thing in place. 

Advertisement

The vise is quite popular among those who purchased it, garnering a 4.9 rating with a little over 300 reviews. Customers say that the vise is sturdy, functions well, and the swivel moves smoothly when you do need to engage with it. 

Advertisement

A bunch of Icon and Quinn hand tools

Perhaps the most enticing items on sale are a slew of screwdrivers and pliers from Doyle, Icon, and Quinn that are on sale. There are a few dozen tools and tool sets on sale, including screwdriver sets, bolt cutters, needle nose pliers, a pliers wrench, and basically any other clamping or screwdriver tool you can imagine. This is an excellent opportunity to fill any gaps in your toolbox, especially since Harbor Freight offers lifetime warranties on all hand tools, regardless of brand.

The prices vary from item to item, but everything on this webpage is 35% off until around mid-April. Harbor Freight tools tend to work as well as their big brand-named counterparts, and usually cost less. In terms of tool hierarchy, Quinn is closer to a budget brand while Icon is Harbor Freight’s higher-end brand. Doyle is the brand Harbor Freight uses to sell tools that are expected to get professional use. 

There are too many sets, tools, and deals here to list them all individually, so the link above is a good place to start learning more about what tools are available, how much they cost, and what they do. Harbor Freight also has sales like this going for lighting, gloves, cordless power tools, and other tools as well, if the hand tool angle isn’t your thing. The savings range from 30% to 40%, depending on the category you look at.

Advertisement



Source link

Advertisement
Continue Reading

Tech

Quordle hints and answers for Monday, April 13 (game #1540)

Published

on

Looking for a different day?

A new Quordle puzzle appears at midnight each day for your time zone – which means that some people are always playing ‘today’s game’ while others are playing ‘yesterday’s’. If you’re looking for Sunday’s puzzle instead then click here: Quordle hints and answers for Sunday, April 12 (game #1539).

Quordle was one of the original Wordle alternatives and is still going strong now more than 1,500 games later. It offers a genuine challenge, though, so read on if you need some Quordle hints today – or scroll down further for the answers.

Advertisement

Source link

Advertisement
Continue Reading

Trending

Copyright © 2025