We may receive a commission on purchases made from links.
A beverage cooler is a good solution for people who either want to save space in their refrigerator or need a way to keep cold drinks in a room other than the kitchen. But while these devices can be a convenient method for chilling soft drinks and other beverages, they can only be used to hold food under certain conditions. The reason for that has to do with temperature settings, as well as food safety guidelines.
Advertisement
Perishable food storage should follow the FDA’s 40-degree rule for refrigerators. Since the temperature on some beverage coolers can be adjusted to meet this guideline, they technically become a viable storage option. However, if a beverage cooler’s temperature cannot be adjusted to 40 degrees or below, then it should not be used for perishable food. Additionally, a beverage cooler is not designed to replace a full-size refrigerator, as many coolers lack proper storage space and humidity controls. So, you should not use a beverage cooler to store perishable food over the long term.
The reason food should be kept under the 40-degree threshold is because bacteria can grow quickly at higher temperatures. This is why the FDA designated the range of 40 to 140 degrees Fahrenheit as the “Danger Zone.” A refrigerator operating at proper temperatures can help slow bacterial growth and thus reduce the risk of food becoming unsafe to eat.
Advertisement
Exploring different types of cooling solutions
Lordhenrivoton/Getty Images
A beverage cooler typically isn’t designed for everyday food storage. But if you’re looking for a compact solution that is, a mini fridge might be a better option. Mini refrigerators, much like their larger counterparts, are typically built with adjustable shelves, door bins, and other storage areas. Some mini fridges may also have freezer compartments, which gives them additional functionality.
Another cooling option is an electric cooler, which offers some of the convenience of a mini fridge, but can be easily carried from one space to another. Electric coolers use a powered cooling system to maintain a set temperature, with some models allowing users to adjust that temperature through a smartphone app. Because of its design, an electric cooler is a useful option for camping, tailgating, or on road trips. Depending on the model, you can either plug an electric cooler into a standard outlet or use the built-in battery for power.
Then there are traditional coolers which don’t need power and instead rely on ice. These coolers come in several different types, including soft-sided, which use lightweight foam insulation. Hard-sided coolers typically have thicker insulation that helps the ice last longer, while backpack coolers offer hands-free carrying. Each type of cooler is portable, with the biggest drawback being that you either have to add more ice, or replace the ice, as needed.
Getting your car’s oil changed on time is important, though actually getting to a garage for service can be tricky, depending on how busy you are. That’s especially true when you’re on a long car trip, but there’s nothing special about a road trip that specifically dictates the timing of an oil change. If your trip will interfere with your next oil change whether it’s based on time or mileage, then you should take your vehicle in for service before heading out. That way, you won’t need this necessary maintenance while you’re on the road.
Getting the oil change done beforehand can also save you some time later. That’s because you may not know where you’ll be when the oil change is due, and you could have a hard time finding a garage where you’re traveling. Plus, if you like to do your homework on a service location such as reading customer reviews first, then that could take more time than expected.
However, if you expect to be back home from your trip before the oil change is due, then you can just wait and take your car in at your convenience. Additionally, it’s important to remember that while you want to be aware of your vehicle’s oil change schedule, you should always follow manufacturer recommendations for your specific make and model. That way, you’re in a better position to make the right decision about when your oil change should be done.
Advertisement
Important maintenance checks before a long road trip
Pixelseffect/Getty Images
Before heading out on a long trip, it’s a good idea to visually inspect your vehicle’s fluids. Begin with the oil level first and if you need to add some fresh oil before you leave, you can. Don’t forget to check other important fluids, including engine coolant, brake fluid, power steering fluid, and transmission fluid. Be sure that all fluids are at the proper level, per your vehicle manufacturer’s specifications.
You should also check the tires, confirming that each one is filled to the manufacturer’s recommended air pressure. You can typically find this number in your owner’s manual or on the sticker inside the driver’s doorjamb. Visually inspect your tires as well, paying close attention to any warning signs that your tires need to be replaced, like bulges, cracks, cuts, or uneven wear. If you see any signs of a problem or if the treads are worn down, have the tires checked by a technician before you leave.
Advertisement
It’s a good idea to check your vehicle’s exterior lights as well, including the headlights, brake lights, and turn signals. Look under the hood for any signs of problems with belts or hoses, like visible damage or extreme wear. While you’re there, make sure the battery is in good condition and have it inspected by a professional if it’s showing any signs of weakness. Checking these items off the list ahead of a trip can help you find any issues before they can stop you down the road.
A new NYT Connections puzzle appears at midnight each day for your time zone – which means that some people are always playing ‘today’s game’ while others are playing ‘yesterday’s’. If you’re looking for Sunday’s puzzle instead then click here: NYT Connections hints and answers for Sunday, August 2 (game #1148).
Good morning! Let’s play Connections, the NYT’s clever word game that challenges you to group answers in various categories. It can be tough, so read on if you need Connections hints.
What should you do once you’ve finished? Why, play some more word games of course. I’ve also got daily Strands hints and answers and Quordle hints and answers articles if you need help for those too, while Marc’s Wordle today page covers the original viral word game.
Advertisement
SPOILER WARNING: Information about NYT Connections today is below, so don’t read on if you don’t want to know the answers.
Latest Videos FromTechRadar
Advertisement
NYT Connections today (game #1149) – today’s words
(Image credit: New York Times)
Today’s NYT Connections words are…
NEEDLESS
MYRRH
BACKSTREET
TEA SET
NSYNC
SAGE
FLY BY
NAG CHAMPA
MINT
BYWAY
BUG FIX
RHYTHM
FOREST
LANE
HUNTER
ALLEY
NYT Connections today (game #1149) – hint #1 – group hints
What are some clues for today’s NYT Connections groups?
YELLOW: Paths
GREEN: This color in common
BLUE: Words without A,E,I,O,U
PURPLE: Beginning to annoy
Need more clues?
We’re firmly in spoiler territory now, but read on if you want to know what the four theme answers are for today’s NYT Connections puzzles…
Advertisement
Sign up for breaking news, reviews, opinion, top tech deals, and more.
NYT Connections today (game #1149) – hint #2 – group answers
What are the answers for today’s NYT Connections groups?
YELLOW: ROAD LESS TRAVELED
GREEN: SHADES OF GREEN
BLUE: “Y” IS THE ONLY VOWEL
PURPLE: STARTING WITH SYNONYMS FOR “PESTER”
Right, the answers are below, so DO NOT SCROLL ANY FURTHER IF YOU DON’T WANT TO SEE THEM.
Advertisement
NYT Connections today (game #1149) – the answers
(Image credit: New York Times)
The answers to today’s Connections, game #1149, are…
YELLOW: ROAD LESS TRAVELED: ALLEY, BACKSTREET, BYWAY, LANE
GREEN: SHADES OF GREEN: FOREST, HUNTER, MINT, SAGE
BLUE: “Y” IS THE ONLY VOWEL: FLY BY, MYRRH, NSYNC, RHYTHM
PURPLE: STARTING WITH SYNONYMS FOR “PESTER”: BUG FIX, NAG CHAMPA, NEEDLESS, TEA SET
My rating: Hard
My score: 1 mistake
I managed to achieve two purple firsts in a row, but before my triumph I made a mistake.
Thinking that BACKSTREET and NSYNC was the trap of the day, I confidently linked MYRRH, SAGE, NAG CHAMPA, and MINT, deciding that the connection was something to do with herbs and spices.
Advertisement
Alas, I was wrong, but eliminating NAG CHAMPA from a group of similar things helped me focus on the word itself and in particular the first three letters.
Yesterday’s NYT Connections answers (Sunday, August 2, 2026, game #1148)
YELLOW: FILLER WORDS: ACTUALLY, LIKE, SO, WELL
GREEN: BY MEANS OF: BY, PER, THROUGH, VIA
BLUE: MODE: AIRPLANE, BEAST, DARK, À LA
PURPLE: U.S. AIRPORT CODES PLUS STARTING LETTER: ASEA, FLAX, LORD, OLGA
What is NYT Connections?
NYT Connections is one of several increasingly popular word games made by the New York Times. It challenges you to find groups of four items that share something in common, and each group has a different difficulty level: green is easy, yellow a little harder, blue often quite tough and purple usually very difficult.
On the plus side, you don’t technically need to solve the final one, as you’ll be able to answer that one by a process of elimination. What’s more, you can make up to four mistakes, which gives you a little bit of breathing room.
Advertisement
It’s a little more involved than something like Wordle, however, and there are plenty of opportunities for the game to trip you up with tricks. For instance, watch out for homophones and other word games that could disguise the answers.
It’s playable for free via the NYT Games site on desktop or mobile.
PLUS: DeepSeek to double peak hour prices for new model; Australia hikes fines for Big Tech; Japan’s next moonshot to ride local rocket; and more!
ASIA IN BRIEF Meta last week briefly took down an unremarkable video posted by India’s prime minister Narendra Modi, earning itself days of criticism and regulatory trouble.
The video featured Modi announcing a new task force that will reform the exams required to secure places in many Indian universities. Those exams have become a major factor in the sudden development of a major youth protest movement in India, after the cancellation of one test amid claims that questions had leaked.
Advertisement
As part of his attempts to quell protests, Modi posted his first-ever selfie-style Instagram reel last week and followed it up with others –including the one Meta took down and replaced with a placeholder saying the vid was the subject of a legal complaint.
The social networking giant said that was a mistake, apologized, and restored the video.
That error gave India’s government the chance to beat up Meta in public.
S. Krishnan, the secretary of India’s Ministry of Electronics and Information Technology (MeitY), said he asked Meta “to come in at the highest level and explain what is happening and why.”
Advertisement
“They have agreed to come – well, they have to – and explain what the situation is,” Krishnan said. “We want to have both a policy level understanding and a technical understanding of the issues, and also adaptation to the kind of concerns India has.”
Krishnan said Meta has written to India’s government to express regret over the incident and established new protocols governing moderation of accounts run by prominent people to avoid future messes of this sort.
India has a complex relationship with Big Tech companies, sometimes celebrating their role in assisting the nation’s development, but often also lamenting their monopolistic tendencies and role in spreading content the Modi government would rather netizens don’t see.
DeepSeek teases ‘peak/valley’ pricing for new models which hit beta last week
Chinese AI upstart DeepSeek last week released a beta API for its next model, deepseek-v4-flash, and revealed a new pricing policy for its APIs.
Advertisement
The company says the new policy will apply “soon” and will see the cost of its services double between 09:00 and 12:00, then again from 14:00 to 18:00 – in China’s single official timezone UTC+8.
DeepSeek startled the AI market last year by releasing models that it claimed to have trained without vast fleets of Nvidia accelerators. Those claims didn’t stand up to close scrutiny, but the company is considered a significant challenger to western AI outfits such as OpenAI and Anthropic.
deepseek-v4-flash is likely to reach general availability within weeks. DeepSeek already claims it outperforms its last model, V4-Pro.
Australia proposes new tax on Big Tech – and a new out
Australia’s government has tweaked its plans to tax Big Tech companies unless they pay local media for the right to share links to their work.
Advertisement
The Land Down Under previously threatened tech companies with a 2.25 percent tax if they don’t fund local media. On Monday, that plan changed to a 2.5 percent levy on advertising revenue only and expanded incentives to fund small and regional publications.
Meta has previously slammed the idea as “A discriminatory tax built on a false premise.”
Also in Australia, regulators last week decided to sue Telegram after it failed to take down violent and terrorism-related content.
Kioxia profits jump by billions, as you’d expect from a memory-maker
Japanese memory-maker Kioxia last week announced [PDF] its quarterly revenue grew 451 percent year over year to reach $11.1 billion, plus profit of $5.3 billion – a massive turnaround from the $287,000 loss for the same quarter last year.
Advertisement
According to Japanese outlet Nikkei, CFO Yoshihiko Kawamura said the company expects even better days ahead because he believes demand for NAND storage is “still in the early stages.”
Japan’s next moonshot to ride local rocket
Japanese space startup iSpace last week announced its next mission will ride a Japanese rocket to the moon.
This time around, iSpace plans to use the H3 rocket built by Mitsubishi Heavy Industries, instead of the SpaceX Falcon 9 that carried its first two missions. ®
K2 Space’s Gravitas satellite, shown here during final integration, was launched in March. (K2 Space Photo via PRNewswire)
K2 Space, a California-based satellite company that recently set up an engineering hub in Seattle, has announced a $500 million funding round at a $6.8 billion valuation.
The Series D round was led by Kleiner Perkins and ICONIQ, with participation from CapitalG, Lightspeed, Altimeter, Spark Capital, Sands Capital, ARK Invest, T. Rowe Price Associates and other existing investors.
Since its founding in 2022, K2 Space has raised more than $1 billion in capital and secured an equivalent amount in contracts.
While many satellite companies focus on miniaturization, K2 Space is going big on satellite mass and power. K2 had its first “mega-class” satellite, dubbed Gravitas, launched into orbit on a SpaceX Falcon 9 rocket in March. The two-ton, 20-kilowatt satellite carried a dozen undisclosed payload modules for multiple customers, including the Department of Defense.
Karan Kunjur, co-founder and CEO of K2 Space, said the new capital validates the company’s core strategy.
“When my brother Neel and I started K2 four years ago, we took a contrarian bet that building bigger would be the future for exploring and developing space,” Kunjur said today in a news release. “This latest round validates that thesis and gives us the capital to accelerate scaling as we prepare to build up to 100 large satellites per year.”
“She is creating these storylines based on experiences with my kid and modeling her characters to have similar attributes as my kid, and us[ing] our family’s first names so that they represent us and my kid will ‘see her family reflected,’” an individual wrote on Reddit, detailing how their mother was using AI to make stories for their grandkids, influenced by real-life events.
Multiple parents told WIRED that their kids have received AI-generated story books from grand parents or other senior family members, labelling the trend as “morally reprehensible.” The trend is horrific. I have seen numerous AI-generated books targeted at kids selling on online marketplaces, and even advertisements for tools that use AI to write notes and tributes for real humans.
Ironically, the support for such behaviour comes from AI giants that also own the world’s biggest channels for distrubuting digital content in all shapes and forms. One such source is Amazon, which also runs Kindle as one of the world’s largest digital books platforms.
As far back as 2024, it was reported that Amazon’s store has an AI slop book problem. Poor, AI-written copies of popular books have flooded the ecommerce platform. In the most recent incident that got plenty of coverage in online circles just three weeks ago, Kashmir Hill, a technology journalist at The New York Times, wrote an account of how someone used AI to write her biography and put it for sale on Amazon.
Here is the fun part. You would think that Amazon must be drafting harsh anti-AI policies by now. Well, Amazon is actually adding more fuel to the fire. All the way back in 2022, Amazon released an AI feature called “Create with Alexa,” which lets users create bedtime stories for kids, complete with visuals and animations. In 2026, Amazon rolled out a similar feature that lets you create podcasts on any topic using the Alexa AI assistant.
Platforms like YouTube are also seeing a tsunami of AI-generated brainrot content targeted at kids. It’s pretty odd (and disheartening) to see that the biggest platforms for digital content in varied forms are also owned by companies that are doing cutting-edge work and pushing AI into our lives from every direction.
Amazon should be the guardian of books (on Kindle and its eponymous store for physical books), films and TV shows (through Prime Video) and songs (via Amazon Music). Google and Meta are in a similar position, but once again, they are likely not going to take these AI problems hitting close to home as responsibly as they should.
A new NYT Strands puzzle appears at midnight each day for your time zone – which means that some people are always playing ‘today’s game’ while others are playing ‘yesterday’s’. If you’re looking for Sunday’s puzzle instead then click here: NYT Strands hints and answers for Sunday, August 2 (game #882).
Strands is the NYT’s latest word game after the likes of Wordle, Spelling Bee and Connections – and it’s great fun. It can be difficult, though, so read on for my Strands hints.
Want more word-based fun? Then check out my NYT Connections today and Quordle today pages for hints and answers for those games, and Marc’s Wordle today page for the original viral word game.
Advertisement
SPOILER WARNING: Information about NYT Strands today is below, so don’t read on if you don’t want to know the answers.
Latest Videos FromTechRadar
Advertisement
NYT Strands today (game #883) – hint #1 – today’s theme
What is the theme of today’s NYT Strands?
• Today’s NYT Strands theme is… There’s nothing like it
NYT Strands today (game #883) – hint #2 – clue words
Play any of these words to unlock the in-game hints system.
GLARE
QUEEN
SOIL
SAIL
SIDE
LAID
NYT Strands today (game #883) – hint #3 – spangram letters
How many letters are in today’s spangram?
• Spangram has 10 letters
Advertisement
NYT Strands today (game #883) – hint #4 – spangram position
What are two sides of the board that today’s spangram touches?
• First side: top, 4th column
• Last side: bottom, 4th column
Right, the answers are below, so DO NOT SCROLL ANY FURTHER IF YOU DON’T WANT TO SEE THEM.
Advertisement
Advertisement
NYT Strands today (game #883) – the answers
(Image credit: New York Times)
The answers to today’s Strands, game #883, are…
ONLY
UNIQUE
SPECIAL
EXCLUSIVE
SINGULAR
SOLE
SPANGRAM: ONEOFAKIND
My rating: Easy
My score: Perfect
I had a trio of old songs buzzing around my head while playing this game.
Sign up for breaking news, reviews, opinion, top tech deals, and more.
The most dominant was soul classic There’s Nothing Like This by Omar, thanks to the theme of the day, but it was competing for earworm space with The One and ONLY by Chesney Hawkes and Free Nelson Mandela by SPECIAL AKA.
Fortunately, that didn’t distract me from a fairly straightforward game — although I did get some letter soup at the end while attempting to connect SINGULAR.
Advertisement
Yesterday’s NYT Strands answers (Sunday, August 2, game #882)
AMBITION
GOAL
PLAN
PURPOSE
OBJECTIVE
INTENTION
SPANGRAM: AIMHIGH
What is NYT Strands?
Strands is the NYT’s not-so-new-any-more word game, following Wordle and Connections. It’s now a fully fledged member of the NYT’s games stable that has been running for a year and which can be played on the NYT Games site on desktop or mobile.
I’ve got a full guide to how to play NYT Strands, complete with tips for solving it, so check that out if you’re struggling to beat it each day.
The Theremin is that classic electronic musical instrument that makes those weeee-ohhhhh noises which were so popular in mid-century science fiction movies. Mid-last-century, that is, because this century is just beginning. In any case, you could build one with old-school analog electronics, or you could go a more modern route, as [ericCycles] did.
The build relies almost entirely on an ESP32 microcontroller with minimal supporting circuitry. Like any other Theremin, pitch and volume are controlled by moving hands closer or farther away from two antenna. In this case, the ESP32 uses its capacitive touch circuitry to detect effectively detect hand proximity to the two antenna in question, and uses those values to control the pitch and volume of a synthesized waveform. That waveform is then pumped out over the onboard digital-to-analog converter for playback on external speakers.
If you want to build a simple Theremin-like instrument quickly and easily, it’s hard to beat the simplicity on offer here. We’ve featured some other fun variants over the years, too, like this version that uses time-of-flight sensors for the human interface.
After nearly three decades at Microsoft, cybersecurity executive Krishna Kumar Parthasarathy has announced he is joining Salesforce as executive vice president of engineering.
Parthasarathy is part of a wave of senior Microsoft security leaders who have departed this summer for executive roles at major tech competitors, including Amazon Web Services (AWS), ServiceNow and Salesforce.
In his new role, Parthasarathy will oversee engineering teams for core Salesforce products and features, including Agentforce, Agentforce Voice, Digital Channels, and Service Cloud.
“Salesforce sits at the exact center of enterprise trust and customer context. In an agentic world, that foundation is everything,” he said on LinkedIn.
Other high-profile departures in recent months from Microsoft’s security division include:
Rohan Kumar, former corporate vice president of Microsoft Security, who joined Salesforce as president and chief platform officer.
Rudra “Rudy” Mitra, who spent more than 27 years at Microsoft — most recently leading its Purview data-security business — and joined AWS as vice president of security services.
Rahul Prakash, former head of product for Microsoft Security Copilot, who joined ServiceNow as vice president of product management in identity security.
Vasu Jakkal, former corporate vice president of security, compliance, identity, management and privacy, who stepped down after six years and has not yet announced her next move.
Joy Chik, former president of identity and network access, who announced her retirement in April.
The leadership shifts follow a broader organizational shakeup within Microsoft’s security business under Hayete Gallot, who returned to the company from Google in February to run the group. Naseem Tuffaha also returned to Microsoft last month to take over the corporate VP role vacated by Rohan Kumar.
What we know so far: AMD is taking a different approach with its upcoming Zen 6 processors, introducing a new type of low-power core built from pieces of several earlier Zen designs rather than a single architecture. The change surfaced in a recent Linux kernel patch, which shows how the system identifies and manages these cores. The patch makes clear that the low-power cores are distinct enough to warrant their own classification, rather than being grouped with AMD’s existing compact “C” cores.
Patch notes that the system needs a way to properly identify these low-power cores in user space, since they currently show up as “unknown” in the CPU topology.
It also specifies that on supported AMD and Hygon chips, these cores should scale performance using amd_get_highest_perf() instead of the fixed CPPC_HIGHEST_PERF_PERFORMANCE limit, aligning them with how existing efficiency cores are managed.
What stands out is how these cores are built. Analysis from leaker InstLatX64 points to a hybrid design that combines multiple generations of Zen. The reported setup includes a Zen 6 instruction set, Zen 5 microarchitecture, Zen 4 floating-point unit, Zen 3 L2 cache, and Zen 2 L3 cache.
Instead of designing a low-power core from scratch, AMD appears to be reusing and combining existing components. That mix-and-match approach suggests the company is trying to improve efficiency while keeping development time and complexity in check.
These low-power cores would sit alongside AMD’s current Performance and Efficiency cores, creating a three-tier setup. Performance cores handle high-clock workloads, while Efficiency cores are smaller and tuned for lower power use. The new low-power cores go a step further, targeting very light workloads where minimizing power draw is the priority. In that sense, they’re closer in purpose to Intel’s low-power efficiency cores, though AMD’s design is structured differently.
The potential benefit is clearer in mobile devices. Laptops and gaming handhelds could offload lighter tasks to these low-power cores, reducing overall power consumption. That could help extend battery life and let systems run certain processes at just a few watts. How much of a difference that makes will depend heavily on how well software can manage and assign workloads across the different core types.
There are still gaps in what’s known. AMD hasn’t shared performance or efficiency data for these cores, and it’s not yet clear how well this blended architecture will scale under real workloads. The design is unconventional, and its success will likely hinge on how smoothly the hardware and software layers work together.
Advertisement
This development comes as AMD is rolling out its Zen 6 server chips, with desktop versions expected later this year. But the broader market may complicate things. PC shipments have been trending down, and higher memory prices, driven in part by AI demand, are pushing up system costs.
That matters more in laptops and handhelds, where upgrading the CPU usually means replacing the entire device. Even if AMD delivers better efficiency, adoption could be limited if buyers hold off on new hardware.
Still, the idea of building a core from a mix of proven parts marks a notable change in direction. Rather than stretching one architecture across every use case, AMD is carving out more specialized roles for different core types. If it works, it could give the company more flexibility in how it designs chips for power-sensitive devices.
The portable CD player is back, but today’s models have almost nothing in common with the plastic Discman that spent the 1990s eating AA batteries inside your Jansport backpack.
The compact disc was supposed to be dead by now.
Vinyl received the comeback tour, streaming took over the car, and the last laptop with an optical drive probably shares a drawer with your BlackBerry charger and three unidentified power supplies. For most of the past decade, buying a portable CD player meant choosing between a questionable Amazon special and something recovered from a basement beside a Case Logic binder filled with scratched copies of Ten, Automatic for the People, and the soundtrack to Singles.
Something has changed.
Advertisement
U.S. CD sales climbed 16 percent during the first half of 2026 to 16.3 million units, substantially outpacing vinyl’s 2.4 percent growth over the same period. K-pop and its collectible physical releases contributed to that increase, but CD sales were still up 6.7 percent without them.
That is not 2000 all over again, when a new Radiohead album meant a trip to HMV and enough change left for a sweet veal sandwich on the way home, but it is no longer statistical background noise either.
There is also a wonderfully strange wrinkle to the revival: close to half of the Gen Z and millennial consumers buying CDs reportedly do not own a CD player. For younger listeners, the disc has become a collectible object, a direct way to support an artist, or something tangible that exists outside a streaming service.
Manufacturers have noticed.
Advertisement
Why Portable CD Players Are Coming Back
The renewed interest in CDs is not difficult to understand once you remove the assumption that every physical format has to become vinyl.
Used CDs remain plentiful and generally inexpensive. Entire catalogs can be assembled for considerably less than the price of new vinyl reissues, and the discs are easier to store, clean, ship, and replace. You can also leave one on the passenger seat without treating the car like a temperature-controlled archive.
There is also the increasingly appealing concept of actually owning the music.
Advertisement. Scroll to continue reading.
Advertisement
Streaming remains essential, but subscription prices keep rising, albums can disappear or be replaced with different masters, and the listening experience is constantly interrupted by recommendations, notifications, podcasts, social features, and algorithms convinced that one Steely Dan song means you want to hear yacht rock until the day you die.
A compact disc does something almost radical in 2026: it plays the album you selected, in the order the artist intended, and then stops.
It does not ask whether you enjoyed the experience. It does not generate a playlist called “Ian’s Sophisticated Tuesday Vibes.” It just plays the music.
For Gen X listeners, there is another obvious reason. Many of us already own hundreds or thousands of CDs purchased over several decades. We bought the album once and considered the transaction complete.
Advertisement
What disappeared was not the music collection but the convenient hardware required to play it. New cars rarely include optical drives, computers abandoned them years ago, and many modern audio systems were designed as though everyone willingly donated their record collection to a server farm.
The current generation of portable CD players fills that hardware gap, although the word “portable” now requires some flexibility.
These Are Not the Discmans We Grew Up With
The portable players of the 1980s and 1990s were designed around one primary task: spinning a disc while attempting not to skip whenever you stepped off a curb.
They were generally made from plastic, ran on AA batteries, offered a single 3.5mm headphone output, and delivered just enough amplification for the inexpensive headphones supplied in the box. Anti-skip protection was treated like military technology. A wired remote clipped to your jacket was considered progress.
Advertisement
Today’s models are very different machines.
Depending on the price, they can include aluminum construction, rechargeable batteries, balanced headphone outputs, Bluetooth, digital connections, USB DAC operation, CD ripping, R2R conversion, selectable amplifier modes, and even vacuum tubes.
A Discman played CDs. Some of these products are complete digital source components, DACs, headphone amplifiers, wireless transmitters, and desktop transports that also happen to spin a disc.
They are not necessarily smaller. Several belong in a messenger bag rather than a jacket pocket, and nobody should attempt to jog with a 700-gram tube CD player unless the route ends at an orthopedic surgeon.
Advertisement
Advertisement. Scroll to continue reading.
They are, however, far more useful inside a modern audio system.
A Note About This Guide
This is not a ranked list of the “best” portable CD players.
We have personally used three of the models included below. The remaining selections are based on verified specifications, current availability, features, intended use, and our existing product coverage.
Advertisement
As more review samples become available, this guide will be updated with additional listening impressions and direct comparisons.
Prices were checked on July 27, 2026 and may change.
Syitren R300 ($99)
The Syitren R300 is the least expensive model in this guide and the one that looks least like traditional audio equipment. Its rounded enclosure, raised controls, and range of finishes suggest that Braun and Muji designed a CD player after spending an afternoon inside Tower Records.
It supports standard CDs, CD-G discs, and MP3 CDs. Bluetooth 5.3 can transmit playback to wireless speakers or headphones, while wired connections include a 3.5mm analog output and an optical digital output. Its 2,000mAh battery is rated for up to six hours.
The R300 does not include a balanced output, USB DAC operation, ripping, or a particularly powerful headphone amplifier. It is primarily a stylish and uncomplicated way to play discs through basic wired headphones, an external DAC, or a Bluetooth speaker.
Advertisement
Bluetooth compatibility may vary with automotive systems, so buyers hoping to restore CD playback in a newer car should temper their expectations.
At $99.99, however, it remains the most approachable entry point for someone who wants physical playback without studying an output-power chart first.
The FiiO DM13 helped establish the current portable CD player category by demonstrating that an affordable model could offer considerably more than a headphone jack and a prayer.
Advertisement. Scroll to continue reading.
Advertisement
Its dual Cirrus Logic CS43198 DACs feed both 3.5mm and 4.4mm balanced headphone outputs, with up to 180mW and 660mW per channel into 32 ohms, respectively. It also offers line-level operation, optical and coaxial digital outputs, Bluetooth transmission, gapless playback, and more than ten hours of rated battery life.
The DM13 can rip CDs directly to a FAT32-formatted USB storage device as WAV files, making it one of the least expensive ways to play and archive a collection without involving an aging computer or external optical drive.
It does not function as a USB DAC. The USB connection is used for power and ripping rather than accepting digital audio from a computer.
At $164.99, the DM13 remains one of the strongest combinations of price, output power, connectivity, wireless playback, and ripping support. It lacks the R2R conversion and more elaborate amplifier architecture of the DM15, but covers the fundamentals without turning a portable CD player into a graduate-level engineering course.
The Moondrop DiscDream 2 takes a more focused approach than the FiiO DM13.
There is no Bluetooth transmitter, balanced headphone connection, or onboard ripping. What it provides instead is a straightforward wired player with a transparent lid, clearly marked controls, USB DAC operation, and a nine-hour battery.
Its 3.5mm headphone output delivers 124mW into 32 ohms, while a multifunction connection provides line-level and optical output for use with an amplifier or external DAC. The DiscDream 2 supports CD, CD-R, and CD-RW playback, and its USB DAC mode handles high-resolution PCM and DSD files.
This is the model for listeners who want their portable CD player to remain primarily a CD player.
Advertisement
The absence of Bluetooth will be a deal breaker for some buyers, but it also means fewer menus, codecs, pairing routines, and negotiations with whatever wireless device happens to be nearby.
The design is more distinctive than the DM13, and the nine-hour battery makes it suitable for travel or extended desktop listening. Its headphone amplifier is best suited to reasonably efficient headphones and IEMs rather than difficult planar models.
The EC Play is Shanling’s smallest, lightest, and least expensive portable CD player, although “lightest” still means approximately 418 grams.
That is considerably more substantial than the plastic players we carried during the first Bush administration, but the aluminum construction, active magnetic disc clamp, and internal hardware also belong to a different class.
A Cirrus Logic CS43198 DAC and dual SGM8262-2 amplifiers deliver 177mW through the 3.5mm output and as much as 700mW into 32 ohms through the balanced connection. The EC Play can also operate as a USB DAC and provides coaxial digital output for an external converter.
Bluetooth 6.0 works in both directions, although codec support depends on the operating mode. Receiver mode supports LDAC, AAC, and SBC, allowing the EC Play to function as a wireless DAC and headphone amplifier for a phone. CD transmission is limited to SBC.
Its 3,450mAh battery is rated for up to 12 hours, currently the longest claimed CD playback time among the models in this guide.
Advertisement
There is no ripping function, but the combination of balanced output, USB DAC operation, two-way Bluetooth, and excellent battery life makes the EC Play one of the most practical all-around designs under $200.
The FiiO DM15 R2R takes the basic formula established by the DM13 and adds a 24-bit resistor-ladder DAC, stronger amplification, USB DAC operation, improved controls, and a transparent lid that lets you watch the disc spin.
Because apparently we missed doing that.
FiiO’s fully differential R2R DAC uses 192 precision thin-film resistors and supports PCM up to 32-bit/384kHz and DSD256 in USB DAC mode. Bluetooth transmission includes aptX, aptX HD, aptX Adaptive, and SBC, while optical and coaxial outputs allow the DM15 to serve as a transport inside a larger system.
Advertisement
Output power rises substantially over the DM13. In battery mode, the DM15 provides approximately 220mW through its 3.5mm output and 812mW through its balanced connection into 32 ohms. Desktop mode increases those figures to roughly 310mW and 1,150mW.
Battery life is rated at more than seven hours during CD playback.
Advertisement. Scroll to continue reading.
The DM15 can also rip CDs to WAV while listening and includes three bass settings and eight EQ presets. At $269.99, it is the point where this category begins to resemble proper headphone hardware rather than a modern reproduction of something purchased at RadioShack.
The Shanling EC Zero AKM uses the same basic enclosure, disc mechanism, display, controls, inputs, and outputs as the more expensive EC Zero T but removes the R2R converter and JAN6418 vacuum tubes.
In their place are an AKM AK4493S DAC and dual SGM8262-2 amplifiers. The change reduces the price to $319, extends rated wired playback to ten hours, lowers the output impedance for better compatibility with sensitive IEMs, and still provides up to 836mW through the balanced connection.
The EC Zero AKM includes dedicated headphone and line outputs, USB DAC operation, Bluetooth transmission with aptX Adaptive, combined optical and coaxial digital output, and real-time CD ripping to compatible USB storage.
It does not receive Bluetooth audio, and there is no LDAC support.
Advertisement
What it offers instead is most of the EC Zero platform’s flexibility without asking the buyer to pay for tubes or R2R conversion. For listeners who plan to use the player with several pairs of headphones, powered speakers, a desktop amplifier, and an external DAC, it may be the most rational member of the family.
Yes, “rational” is a relative term when discussing a $319 portable CD player in 2026.
The DiscDream 2 Ultra is the more ambitious and substantially more expensive sibling of the standard DiscDream 2. Current pricing has climbed to approximately $349.99, although the model originally entered the market closer to $289.99.
Its CNC-machined aluminum clamshell enclosure is one of the most distinctive designs in the category. Connectivity includes 3.5mm and balanced 4.4mm headphone outputs, along with a separate multifunction connection for line-level and optical output.
Advertisement
The balanced output delivers 222mW into 32 ohms, while the single-ended connection supplies 112mW. USB DAC operation supports PCM up to 384kHz and DSD256, and the 3,500mAh battery is rated for eight hours of CD playback.
Advertisement. Scroll to continue reading.
As with the less expensive DiscDream 2, there is no Bluetooth or ripping function. The Ultra is therefore less versatile than similarly priced alternatives from FiiO and Shanling, and its headphone amplifier is not intended for especially difficult loads.
What it offers is a more luxurious enclosure, balanced wired playback, and a focused operating experience without wireless features or an extensive menu structure.
Advertisement
It is also more transportable than genuinely pocketable, unless your jeans were designed by the same people responsible for JNCO.
The original EC Zero T marked the point where portable CD players stopped pretending to be simple devices.
Its in-house R2R DAC uses 192 precision resistors and offers selectable non-oversampling and oversampling modes. Dual JAN6418 vacuum tubes allow users to switch between tube and transistor output stages, while a TPA6120 headphone amplifier drives both single-ended and balanced headphones.
The EC Zero T also includes dedicated line outputs, Bluetooth transmission with aptX Adaptive, digital output, high-resolution USB DAC operation, and real-time CD ripping. Its 5,500mAh battery is rated for eight hours.
Advertisement
Output power depends on the operating mode and power source. On battery power, the balanced output reaches 551mW into 32 ohms. Connecting external DC power raises that figure to 1,220mW in transistor mode or 1,087mW in tube mode.
At 669 grams, about the weight of six Sony NW-A306 Walkmans, the EC Zero T stretches the definition of portable without completely snapping it.
The arrival of the more powerful EC Zero T Max makes the original harder to justify at its full MSRP, but current pricing around $519 changes the equation substantially.
It takes the original EC Zero T’s R2R DAC, dual JAN6418 tubes, disc mechanism, USB DAC support, Bluetooth transmission, digital outputs, and ripping capabilities and addresses one of the original model’s primary limitations: maximum headphone power while operating from its internal battery.
The upgraded amplifier circuit is built around AD8397 devices and delivers up to 361mW into 32 ohms through the 3.5mm output and 1,300mW through the balanced connection without requiring external power. Output impedance has also been reduced, potentially improving compatibility with both demanding full-size headphones and sensitive IEMs.
Shanling also applied power-supply and circuit refinements derived from its newer R2R products, while the titanium-gray finish and patterned disc cover distinguish the Max from the original.
Advertisement
The important distinction is not merely another number on a specification sheet. The original EC Zero T required external power to deliver its maximum output, while the Max can produce 1.3 watts per channel from its battery.
That makes the “portable” part of its description considerably more convincing, even if Eugene Pontecorvo would need a larger Members Only jacket to carry it.
Shanling had not published a final battery-life rating for the Max when this guide was prepared.
The Cayin CP6 is the most ambitious and expensive portable CD player in this group, combining dual Raytheon JAN6418 tubes, three selectable timbre modes, switchable amplifier operation, a discrete headphone output stage, dual DACs, two-way Bluetooth, USB DAC operation, CD ripping, and enough aluminum to make its definition of portability somewhat theoretical.
Its three output modes include Classic Tube, Modern Tube, and Solid State. Classic Tube is intended to provide a smoother and warmer presentation, while Modern Tube emphasizes openness and resolution. Solid State bypasses the tube character for a cleaner and more neutral output.
The digital section uses two Cirrus Logic CS4308P DACs operating in mono mode, followed by OPA1612 devices for current-to-voltage conversion and filtering. An XMOS XU316 processor manages USB audio, allowing the CP6 to operate as a high-resolution external DAC when it is not playing discs.
The CP6 includes single-ended and balanced headphone outputs, optical and coaxial digital connections, and Bluetooth 5.4 through a Qualcomm QCC3083 chipset. Unlike most of the players in this guide, it can transmit CD playback to wireless headphones or receive audio from a phone.
Battery operation is rated for up to 7.5 hours. When connected to external DC power, the balanced amplifier can deliver as much as 1,300mW per channel into 16 ohms.
Advertisement
Advertisement. Scroll to continue reading.
The CP6 does not include Wi-Fi, Ethernet, native streaming applications, SACD playback, or conventional RCA and XLR outputs. It is not a network player, and it is not trying to replace a full-size disc transport.
It is better understood as a tube DAC and powerful balanced headphone amplifier with a rechargeable battery, Bluetooth, and a CD mechanism installed on top.
Calling it a Discman is rather like calling a Porsche 911 a Volkswagen with better seats.
Below $200, the FiiO DM13 offers the broadest feature set, especially for listeners who want balanced headphone output, wireless transmission, digital outputs, and ripping. The Shanling EC Play costs slightly more but counters with USB DAC operation, two-way Bluetooth, greater balanced power, and longer battery life.
The Syitren R300 makes sense as an inexpensive and design-focused entry point, while the Moondrop DiscDream 2 is better suited to listeners who prefer a simpler wired player and have no need for Bluetooth or ripping.
Between $250 and $400, the FiiO DM15 R2R provides the most aggressive combination of output power, R2R conversion, USB DAC operation, Bluetooth, and ripping. The Shanling EC Zero AKM costs more but adds dedicated line outputs, a larger battery, and a broader range of system connections.
Advertisement
The DiscDream 2 Ultra prioritizes enclosure quality and straightforward wired playback over features.
The Shanling EC Zero T, EC Zero T Max, and Cayin CP6 occupy a very different part of the market. These are transportable audiophile source components designed for listeners who want tube output, stronger headphone amplification, multiple operating modes, and integration with desktop or full-size audio systems.
None of them will recreate the experience of skating to school with a Discman clipped to your belt and Dookie skipping every time you hit a crack in the sidewalk.
That is probably for the best.
Advertisement
Portable CD Player Comparison
Prices and specifications checked Aug 2, 2026. Manufacturer-rated battery life and output figures are shown.
Up to 1,300mW per channel at 16 ohms with external DC power
The Bottom Line
Portable CD players make sense because many of them use rather good DACs for the application, can drive everything from sensitive IEMs to demanding headphones, and fit comfortably on a desk, an airline tray at 30,000 feet, or a nightstand.
Just make sure the headphone cable is long enough. That awful thud at 3 a.m. when you roll over, pull the player onto the floor, and mumble something about not touching the last piece of biltong is not part of the listening experience anyone needs.
Advertisement
They are practical, increasingly capable, easy to move around, and yes, still undeniably cool.
You must be logged in to post a comment Login