Join Mikko Hyppönen and security leaders from the NFL, CHANEL, and Atlassian for a two-hour digital summit on what AI-speed attacks change, what defenders should stop doing, and how to validate, decide, fix, and re-validate at machine speed.
Tech
F5 patches BIG-IP APM zero-day flaw exploited in RCE attacks
F5 has released security updates to address a critical BIG-IP APM zero-day vulnerability being exploited in remote code execution attacks.
BIG-IP APM (short for Access Policy Manager) is the company’s centralized access management proxy solution that helps admins secure access to their organizations’ networks, applications, cloud, and application programming interfaces (APIs).
Tracked as CVE-2026-94127, the flaw affects instances configured as an OAuth Authorization Server when a BIG-IP APM access policy and an OAuth profile are configured on a virtual server.
“We have learned that this vulnerability has been exploited,” F5 warned in a security advisory published on Tuesday. “Deployments using APM strictly as an OAuth Client / Resource Server (without OAuth authorization server profiles configured) are not affected by this vulnerability.”
The company advised customers to review systems for indicators of compromise if they detect a combination of multiple OAuth authentication failures and suspicious commands, shortly followed by a TMM SIGABRT.
F5 also shared mitigation measures for admins who can’t immediately install the security updates, which require applying an iRule (available from F5 Support) to the affected BIG-IP APM virtual server.
Internet threat monitoring non-profit Shadowserver currently tracks over 14,700 IP addresses with BIG-IP APM fingerprints. However, there is no information on how many have already been patched or are honeypots.

On Tuesday, the Cybersecurity and Infrastructure Security Agency (CISA) also added CVE-2026-94127 to its Known Exploited Vulnerabilities (KEV) Catalog and ordered U.S. federal agencies to secure their networks against this flaw by Friday.
“These types of vulnerabilities are a frequent attack vector for malicious cyber actors and pose significant risks to the federal enterprise,” the cybersecurity agency warned.
Cybercrime and state-backed threat groups have often exploited F5 vulnerabilities in recent years. For instance, attackers have targeted security flaws in F5 products to breach corporate networks, hijack devices, map internal servers, deploy data-wiping malware, and steal sensitive documents.
F5 also disclosed in October 2025 that state-sponsored hackers breached its systems in August 2025 and stole undisclosed BIG-IP security source code and vulnerabilities.
Since November 2021, CISA has flagged eight actively exploited F5 vulnerabilities, four of which have also been abused in ransomware attacks.
F5 is a Fortune 500 company that provides cybersecurity, application delivery networking (ADN), and other services to more than 23,000 customers worldwide, including 48 of the Fortune 50 companies and 80% of the Fortune Global 500.
Tech
Improve Your Apple CarPlay Experience By Doing These Simple Things
CarPlay can become even better when you take a few minutes to customize it.
Your iPhone turns your car’s infotainment system into a navigation and communication hub, thanks to CarPlay. While it works great by default, there are several ways to make it even better, plus new features that arrive every so often.
From configuring CarPlay basics to designing the perfect app layout, adjusting the feature can make your commute safer and more entertaining. And with iOS 27 bringing several new updates to CarPlay, now is a great time to dive into this core iPhone function.
Make the most of the layout and display
The easiest way to up your CarPlay game is customizing its layout to your liking. You may be surprised to learn that you must rearrange icons on your iPhone, not your car’s display. To do this, open Settings on your iPhone, tap General and select CarPlay. From there, select your vehicle and enter the Apps menu.
Here, you’ll find a list of apps on your phone compatible with CarPlay; drag them up or down to make the most important ones readily available on your CarPlay screen. The size of your car’s display defines how many apps make it onto the first page, so you may have to get creative when prioritizing your most-used ones. To remove or add apps, tap the red minus or green plus, respectively.
Starting with iOS 26, you can further organize your infotainment system through CarPlay widgets. These bring the same quick views you use on your phone’s Home screen, such as weather, calendar and clock, to your Car’s display. Edit them by tapping Widgets on the same menu where you selected your Apps earlier. CarPlay will intelligently swap your widgets throughout the day if enable Smart Rotate, and the similar Widget Suggestions will show available ones even if you haven’t added them.
CarPlay’s overall brightness should shift with your dash controls, but you can go further to toggle light and dark mode to suit the conditions to the time of day. Go to Settings > Appearance on your CarPlay screen, then select Automatic to allow your CarPlay brightness to adjust automatically. Apple’s CarPlay visual accessibility guide can also help here.
To spruce up its look, customize your wallpaper by opening Settings inside CarPlay and tapping Wallpaper. Choose your favorite option and hit Set. You can also change the colors of your icons, toggling between Default, Dark and Clear, under Settings > Customize icons in CarPlay.
Maximizing what you get from CarPlay
Siri is built into CarPlay; by saying “Hey Siri” or pressing the voice button on your car’s steering wheel, you can send messages, start navigation, change the playlist and take other actions. On a compatible iPhone, the revamped Siri AI in iOS 27 is also more useful in the car. And if the assistant is becoming a backseat driver, you can stop Siri from interrupting you while using CarPlay by tinkering with various settings.
If you like, you can go further by enabling Voice Commands, an accessibility feature that provides more CarPlay controls with your voice. To turn this on, go to Settings > Accessibility > Voice Control in CarPlay. Once enabled, it will continually listen for commands like opening apps, swiping left/right or touching a certain element on the screen. For a full list of commands, see Apple’s Voice Control CarPlay support page.
The Focus feature is a productivity must-have on your iPhone, and the Driving Focus helps reduce distractions from notifications while not affecting essential driving apps. To enable Driving Focus, go to the Settings on your vehicle’s CarPlay display, select Driving Focus and choose Activate with CarPlay. For best results, customize your Driving Focus notification settings on your phone by going to Settings > Focus > Driving. Under People, select contacts whose messages you’d like to allow through or silence. You can also allow repeated calls from people who are otherwise suppressed, as well as create auto-replies. Visit the While Driving tab to turn on this Focus automatically whenever you connect to CarPlay, if you didn’t already do so on your iPhone.
Beyond these settings and app changes, elite CarPlay users use both wireless and wired connections depending on the situation. Although a wireless connection is convenient, it doesn’t charge your phone while using it unless your car has a wireless charging pad. As such, on extended road trips, plugging in your phone is the right choice to keep the battery topped up.
Other little tricks make CarPlay even smoother. In the Messages app on your iPhone, tap and hold a frequent conversation and choose Pin to keep it at the top — doing this will also pin it in the Messages app for CarPlay. And don’t forget about the Shortcuts app, where you can build CarPlay automations.
Tech
How To Hide Or Replace The Audio Button In iMessages
You can make that button actually useful.
Have you accidentally tapped the audio button inside iMessage’s text input bar when sending a message? Justin Bieber went viral with an Insta post complaining about how frequently it happened to him.
The problem is that tapping the button launches a voice recording session, during which your iPhone will stop playing music so it can record the message it thinks you want to send.
Bieber became frustrated enough at how often this accidentally happened to him while texting that he wrote, “The send button should not have multiple functions in the same spot,” and joked that he would put everyone at Apple in a “choke hold” until it got fixed.
His post generated thousands of likes, reposts and reactions. We don’t know if Apple was responding to Bieber or not, but it has made a change to ease the problem. iOS 27 now gives you a choice, permitting you to choose between continuing to display the default waveform-like record icon, a microphone icon for quick access to dictation, or even nothing at all.
iMessages text entry mastery
Starting with iOS 27, new choices are available in Settings > Apps > Messages > Show in Text Field. You can select one of three options:
- Record Audio: You may want to retain this if you regularly send voice messages.
- Start Dictation: Useful if you dictate texts rather than typing them.
- None: The “Bieber” option for those who don’t dictate or record audio frequently enough to need these controls.
When you return to iMessages, you should see your choice appear in the text entry field. If it doesn’t, then force quit the app, open it again, and the change should appear.
Now even Bieber should no longer have this problem.
How do you access these functions in future?
You don’t lose any functionality when you remove these buttons from iMessage; all the options remain
You just need to know where to look:
- To record voice messages, just tap the + (plus) button to the left of the text entry box and tap Audio from the list that appears.
- To dictate a message, tap the microphone icon you see just under the keyboard on the lower right. (This should be on by default, but if you can’t see it, you can re-enable it in Settings > General > Keyboard > Enable Dictation.)
Apple made several improvements in iMessage with iOS 27. One nice enhancement (possibly introduced in preparation for the larger display available on the iPhone Duo) is a new Drawing app that lets you send sketches and handwritten notes, and it provides markup tools within iMessage.
Apple also introduced a new AI tool that suggests useful words and phrases and can automate tasks within a conversation, such as adding items to Reminders or Notes. It is also now possible to use one number across two separate iPhones. Finally, Apple’s messaging app now offers improved RCS support, including the ability to edit and unsend messages.
Tech
1MORE S20 Ultra Clip-On Earbuds Target Open-Ear Audio Buyers at $79.99
In our recent article, Open-ear Earbuds Are Booming While Traditional TWS Stalls, we noted that clip-on models are a major factor driving growth in the open-ear category. Continuing that trend, 1MORE has announced the S20 Ultra Wireless Clip-On Earbuds for a reasonable $79.99.
The S20 Ultra focuses on several longstanding challenges with this type of design, including sound leakage, wearing stability, and voice call performance. 1MORE combines high-resolution audio support with an ergonomic ear-clip design, smart features, and a feature set intended for everyday use.
Related Reading:

1MORE S20 Feature Overview
Open-Ear Awareness: Music can be enjoyed without blocking the ears, allowing users to remain aware of conversations, traffic, announcements, and other sounds around them. That makes the S20 Ultra well suited for commuting, outdoor walks, workouts, and everyday use.
Ultra-Light Comfort: Each 1MORE S20 Ultra earbud weighs just 5.5 grams. The company’s Balance AIR+ 3.0 design uses an ergonomic layout and balanced weight distribution to reduce pressure on the ear. Breathable, skin-friendly materials are intended to improve comfort during extended listening sessions.
Adaptive Secure Fit: The S20 Ultra uses flexible memory titanium C-rings designed to conform more naturally to different ear shapes. The clip-on design aims to reduce pinching and fatigue while maintaining a secure fit during workouts, commuting, work, and other daily activities.
All-Day Battery Life & IP66 Rating: The S20 Ultra provides up to 8.5 hours of playback per charge and up to 40 hours total with the charging case when SuperBass 3.0 is enabled. The earbuds are also IP66-rated for resistance to sweat, rain, dust, and splashes.

Audio Support: The 1MORE S20 Ultra features Bluetooth 6.0 with Hi-Res Audio support and the LDAC codec. Custom 11 mm triple magnet drivers use four layer diaphragms and support SuperBass 3.0.
BISA spatial audio is designed to create a more expansive, layered soundstage, while SDT 2.0 directional sound technology directs more of the audio toward the listener’s ears to reduce sound leakage.
1MORE App: The 1MORE App for iOS and Android provides access to six preset EQ modes, a low latency gaming mode, Find Headphones, and additional settings and controls.
Clear Calls: The S20 Ultra uses four directional beamforming microphones with AI noise reduction to help isolate the user’s voice while reducing wind and surrounding noise. The system is designed to improve call clarity and stability in noisy environments, including during running, cycling, commuting, and outdoor work.

1MORE S20 Ultra Open Specifications
| 1More Brand | S20 Ultra |
| Product Type | Open-Ear Clip-on Wireless Earbuds |
| Price | $79.99 |
| Wearing Style | Clip-On |
| Drivers | 11 mm triple-magnet with 4-layer diaphragms |
| Single Earbud Battery Capacity | 40 mAh |
| Charging Case Battery Capacity | 400 mAh |
| Earbud Charging Time | 90 minutes |
| Charging Case Charging Time | 120 minutes |
| Single-Earbud Playback Time | 8.5 hours on a full charge |
| Playback Time with Charging Case | Up to 40 hours (SuperBass 3.0 enabled) |
| Speaker Impedance | 18 Ω |
| Bluetooth Version | Bluetooth 6.0 |
| Bluetooth Range | 10m (Open space) |
| Bluetooth Protocols | HFP/A2DP/AVRCP |
| Frequency Range | 2.400GHz – 2.4835GHz |
| LDAC | Yes |
| Spatial Audio | BISA (Baseus Immersive Spatial Acoustics) |
| IP Rating | IP66 |
| Power Input | 5 V = 1A |
| Working Temperature | 0℃ – 45℃ |
| Single Earbud Weight | 5.5 g |
| Charging Case Weight | 36.5 g |
| Total Weight | 47.5 g |
| Colors | White, Rose Gold, Silver, Black |
| What’s in the box | 1MORE S20 Ultra x1
User Manual x1 USB-C Charging Cable x1 |
The Bottom Line
The 1MORE S20 Ultra arrives at exactly the right time. Clip-on earbuds have quickly become one of the more interesting parts of the wireless market because they offer something conventional TWS models cannot: music without sealing off your ears from everything happening around you.
At $79.99, the S20 Ultra also offers a lot for the money. Bluetooth 6.0, LDAC, spatial audio, up to 40 hours of total battery life, an IP66 rating, and four microphone calling support make this more than just another inexpensive open ear option. The 5.5 gram design puts comfort at the center of the experience, while 1MORE’s SDT 2.0 directional sound technology attempts to address one of the category’s biggest weaknesses by directing more of the sound toward your ears and reducing leakage.
There is plenty of competition. The SOUNDPEATS Clip1 sells for $69.99, while the newer UU2 comes in at just $49.99 and also offers Bluetooth 6.0 and LDAC. At the other end of the category, the Shokz OpenDots ONE costs $199. That puts the S20 Ultra in an interesting middle ground for listeners who want more features than the least expensive clip on models without spending $200.

Who is it for? Commuters, runners, cyclists, office workers, and anyone who dislikes having conventional earbuds pushed into their ear canals but still wants better codec support and useful app features. The S20 Ultra does not reinvent the category, but for less than $80, 1MORE has assembled a rather compelling package in one of the fastest growing segments of the wireless earbud market.
Where to Buy:
Related Reading:
Tech
4 DeWalt Tools That Can Come In Handy For Truck Drivers
We may receive a commission on purchases made from links.
As of 2025, the generations-long Ford F-Series and Chevy Silverado are the two best-selling vehicles in America, with the Ram Pickup coming in fifth. In fact, trucks had a higher share of vehicle purchases than passenger cars last year. All this means that truck driving isn’t just common in the U.S.; it’s a point of pride and a defining feature of the nation’s roads. To serve that massive portion of buyers, we’re highlighting a few tools that can prove important for truck drivers. But because of the unique nature of pickup trucks in comparison to cars, these tools can be rather different and more specialized.
Industry giant DeWalt has an enormous array of highly-rated tools in every category, and it can be quite difficult to know what’s best for your vehicle, especially if you’re newer to the world of trucks. So, if you’re looking to update your toolkit as a truck driver, the following popular picks from DeWalt are the perfect place to start. We’ve picked items from a range of different categories that we deem most useful for truck drivers, so that regardless of your budget or specific needs at the moment, there should be something to consider.
20V MAX LED handheld area light
That small emergency flashlight that you keep in your glove compartment can be perfectly suitable for illuminating the interior and exterior of your car as needed, but for truck drivers, this can dramatically complicate the work of finding an essential component, securing cargo, completing a routine maintenance job, or inspecting the truck before setting out on a job. Truck drivers, then, will typically appreciate something more heavy-duty.
If you’re a DeWalt customer, there’s one particular item that’s a good fit: The 20V MAX LED handheld area light. As the name suggests, it’s designed not simply to provide a narrow beam of light that the user has to direct by hand, but also to be quickly and temporarily affixed where needed to give broader, hands-free illumination. Its body is shaped with grips that make it more comfortable to hold for longer periods, and it also features a beltloop accessory.
The versatility of DeWalt’s 20V MAX* LED handheld area light extends to its suite of features as well. DeWalt notes that the area light features can be set between 300 and 1000 lumens, with a head that can swivel 140 degrees. Its compatibility with the rest of the range also means that users of other 20V MAX products may already have the battery and charging capacity they need for this model. Being designed for job sites, it can be a truck driver’s stalwart companion. You can currently find it for $55 on Best Buy and $45.10 on Amazon (down from $89), where it boasts an average of 4.8 stars based on over 1,300 reviews.
Grabo suction lifter
Pickup trucks are perfect for transporting heavier goods such as construction materials around a job site. However, a trucker needs a convenient, safety-compliant means of lifting them. Larger commercial trucks, of course, are often equipped with tail lifts for exactly this purpose, but another convenient tool for transporting heavy goods and equipment safely is the DeWalt Grabo Suction Lifter. A collaboration between DeWalt and GRABO, this is, according to the brand, “the first professional electric vacuum lifter.” A tool like a vacuum lifter, in some cases, may be the only practical way to move heavy loads with smooth surfaces, such as metal or plastic panels, slabs, and stones.
With a maximum load capacity of 265 lbs, this heavy-duty vacuum lifter is powered by batteries from DeWalt’s 18V or Flexcolt line. It boasts a foam/rubber seal with vital safety measures, including a two-action release and a warning and temporary inoperability state if a worker attempts to use it when its battery is below a certain threshold. As with the other items in the DeWalt range, it was created for versatility, and it is compatible with materials ranging from plywood and glass to MDF and pathing slabs. It will set you back $249 on Amazon, but it’s currently discounted to $189.99.
ToughSystem 2.0 DS450 mobile storage box
While trucks with big beds can transport large items — or large quantities of items — that a car owner would be unable to manage, transporting all those goods safely is just as important. This is where a rugged and hard-wearing storage solution you can keep safely in the bed of your truck comes in handy. There are a lot of things to consider before buying a truck bed toolbox, but the DeWalt ToughSystem 2.0 DS450 Mobile storage box could be just the solution for you.
DeWalt’s ToughSystem is a product range created to meet these sorts of needs, to transport both heavy and hard-wearing and more fragile tools without the risk of damage. The DS450 mobile storage box boasts a generous capacity that’s further customizable depending on how the user intends to transport their items. It’s designed to be operated with one hand to be wheeled across a work site on its 8-inch wheels, while its metal two-piece latches on the front keep the tools inside secure.
Because of the range’s modular nature, it can also be used as one important part of an even larger storage system that includes two additional storage boxes as part of the three-piece tower. Couple this with the 250-lb load capacity of the original storage box itself, and it’s clear just how much storage users can have and, of course, how much room they’ll need in a truck bed. The box is available in several stores, including Home Depot, where it’s priced at $125, while all three boxes will set you back $259.97, but are recommended by 82% of the customers.
heavy-duty ratchet tie-down straps
A lot of trucks have open beds, which is naturally a setup that can leave any cargo prone to shifting around heavily with the motion of the vehicle. For the vital job of securing everything you’re carrying in your truck’s open bed, then, you can consider DeWalt’s Heavy-Duty Ratchet Tie-Down Straps. DeWalt’s ratchet straps are available in several varieties, with two hefty versions being the 1.25-inch-by-16-foot Ratchet Tie Down Straps with 3,000 pounds of break strength and the 2-inch-by-27-foot Heavy-Duty RATCHET Tie-Down Strap with a formidable break strength of 10,000 lbs.
These straps are created for different weights or quantities of cargo, and while they also have utility for securing loads in other situations such as trailers, they’re primarily useful with trucks rather than smaller cars. They are made from polyester and feature metal ratchets and armored caps, but note that DeWalt specifies they are weather-resistant rather than weatherproof. The clips are designed to be hard-wearing yet quick to attach.
ACME Tools lists the larger and more formidable variety of 10,000-lb break strength straps for $29.99. Compared to some truck drivers’ essentials, they are far from breaking the bank and can also be easily stored away for convenient access when needed. Though a compact package when not in use, they also have considerable length. Nonetheless, it’s also important to remember that there’s still a limit to these products, and it can be extremely dangerous to exceed it. According to DeWalt, a 10,000-lb break strength translates to a safe working strength of 3,333 lbs, while a 3,000-lb break strength translates to 1,000 lbs.
Tech
Valvoline Coupons and Promo Codes for September 2026
I come from a car family, the kind that always had four or five vehicles in various states of “restoration.” Changing your own oil in my house was not only a rite of passage but a duty—proof that you were self-sufficient and economical, not, as my uncle would say, a “handy-man.” (“I open my wallet and hand over my credit card!” he’d roar.)
Suffice it to say, I changed my own oil for most of my adult life until about eight years ago, when I bought my first new hybrid SUV. Opening the hood for the first time, I saw an arrangement of black plastic rectangles, not the discrete auto parts I recognized. I didn’t know how to change the oil, and I wasn’t sure I wanted to figure it out. I was (and still am) a working parent, and I always appreciate having another chore taken off my plate.
The nearest oil change facility to my house turned out to be a Valvoline Instant Oil Change, and I have been going there ever since, for both that same hybrid SUV and a second one I bought a few years later. Hybrid vehicles require fully synthetic oil, which costs about twice as much per quart as conventional oil, so having the oil changed by a shop is typically worth it when factoring in the labor—especially if you have a Valvoline Instant Oil Change coupon.
Valvoline may be best known for its line of retail automotive products like oil and additives, but it also operates 2,100 US locations of Valvoline Instant Oil Change garages, which perform oil changes at up to 50 percent less than most car dealerships. And faster, too—usually around half an hour in my experience. If you, too, would like to have your oil changed quickly and inexpensively, or get some cash off some quarts of motor oil if you’re still DIY-ing, check out our Valvoline coupons and deals below.
Get $10 Off Full-Service Conventional Oil Change
If you have a basic, non-hybrid vehicle driven under normal conditions (infrequent stop-and-go traffic, no towing), you’re in luck—your oil change will already be relatively inexpensive. It will be even cheaper with this $10-off Valvoline coupon, which includes 5 quarts of Valvoline brand motor oil (diesel quarts may vary), a filter, lube and maintenance check, and tax. Print it or save it to your phone so you have it next time you’re out and about. Not valid with other offers or customer-supplied oil (at that point, you may as well do it yourself).
Unlock $15 Off with Valvoline Blend Oil Change Coupon
This is the coupon I personally use when I get my oil changed. In fact, I’m printing it out right now! Synthetic and synthetic blend oils are best for hybrid vehicles, luxury vehicles, vehicles subjected to a lot of stop-and-go traffic, trucks that tow, or any car with an engine that needs a little TLC. Because synthetic oil is engineered to be more consistent and uniform, it provides better temperature stability and cleaning power, leading to less wear and tear on an engine. It is also, of course, more expensive than conventional oil, so this Valvoline coupon offers a little more off—$15 as opposed to $10. Like the offer above, this Valvoline coupon is good for up to 5 quarts of Valvoline oil, a filter, lube and maintenance check, and tax.
Save 25% When You Subscribe and Save
When you buy more at Valvoline, you save more. One of the easiest ways to save is to buy in bulk, which is especially cost-effective if you have multiple cars or a family with several cars. When you purchase multiple units of motor oil, gear oil, or transmission fluid, you’ll receive a larger discount the more you buy, up to 25% off.
Valvoline Promo Code: $5 Off
Do you change your own oil and shop at a farm store, such as Fleet Farm, Blains, Rural King, Bomgaars, Theisen, Farm King, Quincy, L&M, Runnings, Buchheit, Family Farm & Home, Tractor Supply, or Norby’s? If so, you can get a $5 rebate with the purchase of five quarts of any Valvoline Motor Oil or 1 gallon of Premium Blue Heavy Diesel Engine Oil. Limit 3.
Find Your Nearest Valvoline Oil Change
There’s a reason Valvoline is a go-to for convenient, one-stop oil changes. With more than 2,100 locations nationwide, it’s likely there’s a Valvoline within twenty minutes of you. You can even check online—enter your location on the map and it’ll instantly show the nearest locations, so you and your car can hit the road again. Be sure to check Valvoline’s offers, which often include several oil change coupons so you can save big on your next Valvoline Instant Oil Change. When you find an offer on the coupon page, text or email it, print it from your desktop, or save it to your mobile wallet so you have it handy for your next discounted oil change.
Tech
KRAFTON India Announces KIGI Cohort 4 to Support Game Developers
KRAFTON India has launched KIGI Cohort 4 to support more game developers and studios in the country. Applications open on September 22, 2026. Through KIGI, developers can get financial assistance, expert guidance, and access to global platforms as they work on their games. The new cohort will also consider projects that have moved beyond early development.
KIGI Cohort 4 Expands Support for Games at Different Stages
KIGI Cohort 4 will continue to support early-stage teams and new game concepts. However, the program is expanding its scope to include games further along in development. Mobile games in beta or soft launch can now be considered. For PC games, developers can apply with titles that have a live Steam demo. The demo should also be receiving encouraging community interest. This wider approach gives developers a chance to seek support at different stages of development.
KIGI’s Previous Cohorts and Growing Game Development Support
KIGI launched in 2023 to support emerging game development talent in India. Since then, its earlier cohorts have helped several studios move their projects forward. Studios from the first batch have already reached a successful soft launch. In the second batch, Mumbai-based studio Singular Scheme made progress. Its game, Frontier Paladin, became the first PC game to come out of KIGI and launched on Steam on April 24, 2026.
KIGI Cohort 3 received around 1,000 applications before selecting four studios. These included Xod Games Studio, EvolX Games, Ether Games, and RedDevil Studio. With Cohort 4 now open for applications, more game development teams can apply for support through the program.
Tech
A KLM flight turned around after a power bank caught fire, and it belonged to the airline’s ex-CEO
What just happened? A KLM flight from Amsterdam to Curaçao returned to the Netherlands after a portable charger caught fire in the business-class cabin. The incident underscores how a small battery failure can become a major operational issue on a long-haul flight, especially when an aircraft is far from its destination. It also put a former KLM chief executive at the center of an incident that highlighted the airline industry’s growing focus on portable power banks.
The power bank belonged to Camiel Eurlings, the former chief executive of KLM. The fire started nearly six hours into the flight, while the aircraft was over the Atlantic Ocean. The device left marks on Eurlings’ business-class seat and the window blind beside it.
The timing added to the disruption. Returning to the Netherlands required passengers to retrace much of the route rather than continue to Curaçao. The delay also carried into the next day, when travelers were rebooked on another flight and eventually completed the journey without further disruption.
The diversion shows why airlines pay close attention to portable chargers and other battery-powered devices. A power bank is small, but it contains lithium-ion cells capable of storing a significant amount of energy. If a battery overheats or fails, it can produce heat, smoke, and flames in a confined cabin. Such an incident is harder to manage on a long-haul route, especially when an aircraft is already far from its destination.
Airline rules vary, but carriers have tightened their policies around power banks and charging cords in recent years. Passengers are generally instructed to stop using a device if it becomes hot or begins to smoke.

The incident drew added attention because Eurlings once led KLM. He was not simply a passenger on the diverted flight; he had previously been responsible for the airline whose aircraft was involved.
One passenger told Dutch broadcaster RTL that Eurlings was “very upset” by the disruption but described his decision as “stupid.” Another passenger said: “If you are just a passenger, such a mistake can happen. But if you have enforced the company’s house rules, then this is very strange.”
As portable chargers become standard travel gear, airlines face a difficult balance. Keeping the devices in the cabin gives crews and passengers a chance to spot overheating batteries quickly, but it also puts a potential ignition source in a crowded, enclosed space.
Image credit: RTL
Tech
Myst On The Atari 2600
Although the Atari 2600 was a hugely popular game console in the late 70s, its hardware specs were limited, to say the least. For a dedicated game console of the era this isn’t too surprising, but things like 128 bytes of RAM meant programmers had to work hard to make games that were fun and playable (and they didn’t always succeed). Programming on this system even now is difficult, but nonetheless [Vince] wanted to get a version of Myst running on this system.
Obviously a PC game from the 90s is much to large, in many ways, to fit into an Atari cartridge or play on the 70s-era hardware. For that, there is a “demake” of Myst, a recreation of the game purposely built to run on older hardware it was never meant for. Even so, the game is running on a specialized cartridge built by [Vince] using parts from the real Atari game cartridge BurgerTime which had a bit more memory than normal. It wasn’t quite as straightforward as flashing the new game file to an old EEPROM though; [Vince] came across all kinds of timing issues and other miscellaneous problems that stretched this project out to around a three-year endeavor.
At the end of everything, though, he has a cartridge that will run Myst on the Atari, using the E7 bank switching scheme which afforded this system more memory within the cartridge. For [Vince], who is a fan of the demo scene for consoles like this, this was an interesting experiment to push original hardware to its limits. And, if you want to try this on an Atari 2600 handheld which also uses original hardware, we’d recommend using one of these.
Tech
How To Turn Off And Factory Reset Bose Headphones
One of the most essential accessories for a person who keeps up with technology is a good pair of headphones. If you’re looking for the top-of-the-line products, you’ll likely come across Bose. We’ve highlighted several of the company’s offerings, from customer favorite Bose earbuds, to more immersive over-ear models such as the Bose QuietComfort headphones. If you have the budget for it, Bose is certainly one of the tried-and-true headphone options out there.
Of course, even premium electronics run into glitches sometimes. If, for some reason, your Bose headphones stop working as intended, there are a number of ways to troubleshoot them. The first step is usually turning the headphones off and then on again after around 30 seconds to one minute to force a power cycle. How to do it on your Bose headphones will depend on what model you own, but in general, there should be a power button right on the device that you can press.
If performing a basic power cycle doesn’t get your headphones back to working condition, your user manual or Bose’s support pages may offer solutions specific to the headphone function you’re having an issue with. When all else fails, your last resort could be to factory reset your Bose headphones and start fresh.
How to turn off your Bose headphones and perform a power cycle
Before you panic and contact customer service, one of the easiest glitch fixes you can try without huge repercussions is turning your Bose headphones off. In some cases — for older models such as the Bose Noise Cancelling Headphones 700 – all it takes is a quick press and release of the power/Bluetooth button to turn the headphones off.
Headsets like the Bose QuietComfort 35 may have a slide power button that you’ll have to push to the left to shut the device down. For newer iterations, namely the Bose QuietComfort Ultra Headphones (2nd Gen), you will need to long-press the power/Bluetooth button until you hear a power down tone or see the status light turn off. If you happen to have Bose earbuds, you’ll probably need to place both back in the charging case and close the lid to execute a power down.
After around 30 to 60 seconds, hit the power button again or take your earbuds out of the case to complete a basic power cycle. Normally, this should clear any temporary bugs or memory issues without erasing any pertinent device preferences. If a problem persists, consult your user manual or Bose’s Help Center for your specific needs. Only consider factory resetting your Bose headphones as a last resort as it may clear your paired device history and other customizations you’ve done to your headphones’ audio settings. Apart from the power switch on the headphones, another common fix is toggling the Bluetooth function your Bose headphones are connected to, forcing a new connection by unpairing the headphones from your device, or updating the Bose app on your device. If none of these work, you may need tо go with the factory reset.
How to reset your Bose headphones by rebooting
Resetting your Bose accessory can be further classified into two actions: you can either “reboot” or “restore” your device. The less aggressive of the two is to reboot, which entails restarting your device without modifying any of your settings. This is often the move if your headphones are not responding or if none of the controls are working. Although performing a power cycle can also be a way of restarting your headphones, actual rebooting refers to a series of steps to be performed in order.
For cup-style or over-ear headphones like Bose QuietComfort Ultra Headphones (2nd Gen) or Bose QuietComfort Headphones (2nd Gen):
- Remove the headphones from your device’s Bluetooth list.
- Disconnect any charging or audio cables from the headphones.
- Connect the headphones’ charging cable and charger head to a power outlet, or a powered on computer’s USB port. Do not connect the headphones to the charging cable yet.
- Long-press the power/Bluetooth button on your headphones.
- While long-pressing the button, connect the charging cable to the left (on the Bose QuietComfort Ultra Headphones 2nd Gen) or right (on the Bose QuietComfort Headphones 2nd Gen) earcup. This should cause the power light to blink twice.
- Once connected, wait a few seconds then let go of the power/Bluetooth button.
For the Bose QuietComfort Ultra Earbuds (2nd Gen):
- Place the earbuds in the charging case and make sure the light that indicates it’s charging is on.
- Close the lid of the charging case.
- Plug the charging case to a wall charger or a powered on computer using its charging cable.
- Long-press the button on the back of the case for around 30 seconds until the light on the case turns off.
How to reset your Bose headphones by restoring
For most Bose headphones, rebooting should be sufficient enough to fix unresponsiveness. If not, you can try the reboot process one more time. If it really doesn’t do anything to fix the problem, you may need to go all-in and reset your headphones by completely restoring them.
Also known as a “factory reset” or “factory default,” restoring returns your headphones to its original, out-of-the-box state. It will remove all your settings modifications as well as all the pairings you’ve established. This option is usually reserved for more serious issues, such as headphones that won’t connect or pair to a device.
Here’s how to restore the Bose QuietComfort Ultra Headphones (2nd Gen) to factory default settings:
- Remove the headphones from your device’s Bluetooth list.
- Remove the headphones from your Bose account using the Bose app on your mobile device.
- Long-press the power/Bluetooth button and multi-function button at the same time. This will cause the status light to blink amber for five seconds.
- Keep long-pressing both buttons for 15 seconds until the status light turns solid white. The light should pulse blue when the restore process is complete, indicating that it’s ready for Bluetooth pairing.
To restore the Bose QuietComfort Ultra Earbuds (2nd Gen) to factory settings, do the following after removing the headphones from your device’s Bluetooth list as well as from your Bose account via the Bose app:
- Place both earbuds in the charging case and keep the lid open.
- Long-press the button on the back of the case for 25 seconds until the status light blinks white twice, pulses blue, and then turns off.
- Repeat step 2 two more times. After the third time, the status light should blink amber for three seconds to indicate that the reset is starting. The light will pulse blue once the restore process is complete.
Based on testing, some Bose headphones models only offer the “reboot” option to reset your product. Double-check your manual and your product’s dedicated page on Bose’s Help Center for steps on resetting your product by “restoring” your headphones to factory settings. If you can’t find any, reach out to customer support via Bose’s Contact Us page for assistance in restoring your Bose headphones to its out-of-box conditions.
Tech
Heidi raises $340m and doubles its valuation to $900m
From the day I started Heidi, the ambition was always bigger than writing doctor’s notes.
Dr Thomas Kelly said that on Tuesday, as the company he cofounded announced US$340m of new funding.
The money arrives in two parts. In its announcement, Heidi said Blackbird led a US$100m Series C that values the Melbourne company at US$900m. Phoenix Court, Point72 Private Investments and Headline also took part.
That price is almost double the US$465m Heidi carried last October, when Point72 led a US$65m Series B.
The other US$240m is not equity
The larger half comes from General Catalyst’s Customer Value Fund, and it buys no shares.
Olivia Poh reported for Bloomberg that the CVF is a debt-like instrument. General Catalyst holds no stock and no warrants in Heidi. It funds sales and marketing, then takes a capped share of the revenue that spending produces, on top of getting its money back.
Pranav Singhvi, who cofounded the fund, said it exists so companies with good unit economics can push their growth engine without spending their own balance sheet on it.
Heidi has now raised US$436.6m in total.
The numbers behind the round
Annual recurring revenue went from US$1m to US$50m in two years, reaching that mark in April.
Heidi says its product has supported more than 175 million patient visits, up from 73 million at the Series B, and more than 67 million clinical hours. It puts weekly volume at about 2.8 million patient interactions, across 110 languages and 190 countries. A year ago it counted 116 countries.
At the Series B last October, Heidi reported about two million patient interactions a week across 116 countries. Those are the figures the new ones are measured against.
Enterprise activation sits at around 62%, by the company’s own measure. Heidi employs close to 600 people.
Kelly founded the company in Melbourne with Waleed Mussa and Yu Liu. Blackbird has held a stake since the pre-seed in 2021 and leads this round.
Michael Tolo of Blackbird, which has backed the company since its pre-seed in 2021, said generic AI will not close the healthcare deficit because clinicians ignore it.
Kelly told Bloomberg the company plans to add as many as 150 staff over the next year, and to push into Asia and the Middle East.
Where Heidi already runs
In the UK, Heidi is sole supplier to NHS England Midlands, in what the company calls the largest clinical AI procurement in NHS history. In the US it is used by Beth Israel Lahey Health in Massachusetts. In New Zealand it runs in every emergency department in the country.
Australian deployments include the Royal Children’s Hospital Melbourne, Children’s Health Queensland and Metro South Health.
Britain is buying clinical AI at scale at the moment. Palantir’s £330m NHS contract is heading for renewal with a former deputy Labour leader newly on its payroll.
What the money pays for
Kelly said the round funds a move from documentation to agents that take on clinical work under supervision. He told Bloomberg that within six to twelve months Heidi should handle most of what a doctor asks of it.
Heidi has built its own models rather than renting frontier ones. It says transcription and note generation, which account for most of its compute, now run almost entirely on in-house technology.
Beyond the scribe it has shipped Evidence, which answers clinical guideline questions and has handled more than 10 million queries since March. It has also shipped Remote, a wearable for audio capture, and Dictate.
Part of the round pays for clinical evidence, quality management systems and regulatory submissions. Heidi says it will work with regulators on the appropriate pathway.
The General Catalyst money is tied to go-to-market spending by the structure of the fund, so the equity is what pays for the rest.
Not in the UK or EU
Heidi added one line under its investor quotes. The coming product capabilities will not be available in the UK and EU. The company gave no reason and no timeline.
It does list the paperwork it holds: ISO 27001, SOC 2 Type II, Cyber Essentials Plus and ISO 42001, plus alignment with NHS requirements, GDPR, HIPAA and the Australian Privacy Principles.
Europe has a route for autonomous clinical AI, and it is slow. Vara spent years securing CE certification for AI that reads breast screening images without a second radiologist.
The scrutiny around clinical AI
We reported in August that NHS AI scribes were making errors in patient records, with Healthwatch raising concerns and the MHRA involved. In a separate case, an AI receptionist mishandled a stroke patient.
Heidi says every agentic decision stays under clinician control. Its clinical research team runs testing, validation and published research ahead of release.
Bloomberg points to a 2023 Pew Research Center survey in which 60% of American adults said they would be uncomfortable if their doctor relied on AI to diagnose them.
Other scribe rounds this year
Tandem Health raised $100m on 15 September to turn its own AI scribe into clinic software. That is the same amount of equity, for the same strategic move, one week earlier.
Bloomberg notes two more. Forus took $150m this month at a $3bn valuation, and Latent raised $80m earlier in the year.
Kelly’s pitch against general-purpose assistants is retention. He told Bloomberg that healthcare involves a lot of setup and configuration, and that the company’s data shows customers stay.
The World Health Organization projects a shortfall of 11 million health workers by 2030. Heidi cites that gap as the market it sells into.
-
Fashion5 days agoWeekend Open Thread: Talbots – Corporette.com
-
Tech2 days agoResearchers escape OpenAI Codex sandbox to run commands on host
-
Crypto World4 days agoCircle launches Arc Studio AI agent for building onchain apps
-
NewsBeat4 days agoTrump says US has reached an agreement to take permanent control of Greenland’s security
-
Crypto World2 days agoWho Needs CLARITY Anyway? ARB Could See 70X Increase: Hodler’s Digest
-
Crypto World4 days agoTrading Bitcoin on Robinhood? Why 2% Spread Has Traders Worried
-
Crypto World4 days agoBitcoin price breaks channel as RSI climbs to 63
-
Crypto World6 days agoUS Charges Robinhood Engineers Over Crypto Listing Trades
-
Crypto World5 days agoMortgage and refinance interest rates today, Thursday, September 17, 2026
-
Crypto World4 days agoWorld Money launches in 150+ countries with Stripe
-
Business2 days agoAnalog Devices (ADI) Bets $1.35 Billion on Chips that Let Machines Think for Themselves
-
Crypto World5 days agoSilver prices recover quickly, hitting weekly high today
-
Crypto World2 days agoCoinbase, Robinhood, Circle Seen as Tokenized-Stock Winners
-
Tech5 days agoGPT-6 Astra Reached the Nether in Minecraft, Lost Its Stash to a Creeper, and Farmed Potatoes for Hours
-
Crypto World2 days agoBitcoin price holds above $81K as key catalysts line up
-
Entertainment7 days agoGrey’s Anatomy Showrunner Teases Changes After Cast Exits
-
NewsBeat5 days agoUS was ‘on brink of war’ with China over false AI report of nukes moving in Middle East
-
Crypto World4 days agoCFTC sends crypto market structure rulemaking to White House
-
Tech4 days agoTrump suggests rebranding AI with a new name, says he’s also creating an AI Force
-
Business5 days agoNewsom accelerates AI oversight, advances ‘kill switch’ plan



You must be logged in to post a comment Login