Connect with us
DAPA Banner

Tech

Gamer Wants Real Nintendo 3DS Store Kiosk, Builds His Own from Scratch

Published

on

Custom-Built Nintendo 3DS Store Kiosk
Project Kwokcade spent a long time looking for one of those rare Nintendo 3DS retail displays that used to be found in stores around the world. To be honest, original units don’t show up for sale very often, and when they do, the price is just a little out of reach for most collectors, so he decided to be creative and take a new approach. Instead of waiting, he switched to 3D modeling software and began creating each component from scratch.



It all began with a little of cautious planning. He gathered all of the measurements and photos he could find online, including some extremely useful photographs given by other aficionados and footage from a collector in France. Using 3DS Max, he created a hollow digital model that could be printed at full size. He then divided the design into thirty-one individual parts, each of which would fit on a regular printer bed, and added some holes for dowels to keep everything together, as well as some threaded inserts that could accept screws later. He ensured that the walls were thin enough to save material while remaining robust enough to hold the entire structure once it was put together.

Printing was a bit of a marathon, as he plowed through spool after spool of PETG at 0.2 mm layer height, two walls, and 15% infill. Every main component simply rolled off the bed after a few days of nonstop printing. When he had a decent-sized collection of white plastic parts, he knew the true challenge had only begun. What truly mattered was getting everything aligned properly; a wobbly base would throw off the whole thing, so he double- and triple-checked every joint before deciding to basically glue things together.

Custom-Built Nintendo 3DS Store Kiosk
Post-processing was also time-consuming because he had to remove all of the layer lines and gaps from the print. He filled them in with Bondo glazing putty, then applied primer and sanded everything smooth. After two applications of Rustoleum paint, it looked like a legitimate retail display. The only issue was that it took a long time to complete, and if you missed a location somewhere, it would appear a mile away until the kiosk was fully assembled.

Custom-Built Nintendo 3DS Store Kiosk
Assembly was its own special kind of fun, however getting one major portion to line up properly was a headache in and of itself. In the end, he got there, using wooden dowels to reinforce the connections and super glue to keep everything in place. He then screwed the neck & base together & the tray to the top using three different lengths of screw. He put some plastic tubing over the internal wires to conceal them, then used a hot glue gun to secure any remaining features in place. As a finishing touch, he built a little wood panel to make the base shelf, painted it to match the rest of the kiosk, and called it a day.

Custom-Built Nintendo 3DS Store Kiosk
Attention is drawn to all of the elements that make this replica stand out, as well as the finer details that make it appear authentic. Three brand logos have arrived as UV DTF transfers, one for 19.5in, another for 13.5in, and a third for 5in, all of which press-fit perfectly onto the painted surface. Two large glass panels, one crystal clear and the other with a faint textured appearance from acid etching, have just been lowered into the slots in the front window. Some small plexiglass pieces were then inserted into the side apertures to create the illusion that the demo area was surrounded by protective barriers. The LED strip running inside lights up the space, which means it travels along the rear panel and through the front window glass, casting a nice soft glow similar to the original retail version. Furthermore, there is a hidden USB speaker that is ready to handle any audio needs. The cables are nicely organized thanks to a tiny strip down the back that keeps everything tidy.

Custom-Built Nintendo 3DS Store Kiosk
The operation is powered by a Raspberry Pi 3 or 4, which is linked with a Wisecoco seven-inch monitor. The software that powers this demo experience, including scanned cards and looped material from retailers, is stored on a microSD card. The Pi is neatly placed beneath the screen on the back panel, and the monitor is secured in a bespoke tray that was part of the original modeling. To top it off, a genuine 3DS has been inserted into the front holder, its stylus still in place and ready to be shown. Finally, everything is connected with a few cords and powers up as one unit.

Source link

Advertisement
Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

Canadian premier wants to ban social media and AI chatbots for kids in Manitoba

Published

on

Manitoba could be the first province in Canada to establish a social media ban for kids, but the proposal’s details aren’t very clear yet. The province’s premier, Wab Kinew, announced during a fundraiser event on Saturday and on X that Manitoba would put in place a ban for social media and AI chatbots for its youth.

“They’re doing these very awful things to kids all in the name of a few likes, all in the name of more engagement, and all in the name of money,” Kinew said at the event. “Our kids will never be for sale and their attention and their childhoods should never be profited from.”

Kinew didn’t elaborate on the ban’s crucial details, like the specific age restriction, when it will be introduced nor how it will be enforced. CBC reported that Kinew didn’t speak to reporters after his remarks at the fundraiser.

Besides Manitoba, the Liberal Party of Canada recently voted in favor of proposals to restrict both social media and AI chatbot use for anyone under 16 during the party’s national convention in Montreal. There are several efforts to restrict social media across Canada. One even seeks to limit those under 14 from accessing these platforms, an even younger cutoff than the ban recently enacted in Australia. However, a recent poll from the Molly Rose Foundation has cast some doubt on the effectiveness of such laws, which other countries have also adopted or are currently considering. The poll showed that a majority of teens still have accounts on banned social media platforms, or have found ways around the ban.

Advertisement

Source link

Continue Reading

Tech

Today’s NYT Connections Hints, Answers for April 27 #1051

Published

on

Looking for the most recent Connections answers? Click here for today’s Connections hints, as well as our daily answers and hints for The New York Times Mini Crossword, Wordle, Connections: Sports Edition and Strands puzzles.


Today’s NYT Connections puzzle has a theme: Every clue begins with the letter R! Also, fans of a certain long-running animated show should have no problem with the blue group. Ay, caramba! Read on for clues and today’s Connections answers.

The Times has a Connections Bot, like the one for Wordle. Go there after you play to receive a numeric score and to have the program analyze your answers. Players who are registered with the Times Games section can now nerd out by following their progress, including the number of puzzles completed, win rate, number of times they nabbed a perfect score and their win streak.

Advertisement

Read more: Hints, Tips and Strategies to Help You Win at NYT Connections Every Time

Hints for today’s Connections groups

Here are four hints for the groupings in today’s Connections puzzle, ranked from the easiest yellow group to the tough (and sometimes bizarre) purple group.

Yellow group hint: Pass the croutons.

Advertisement

Green group hint: Old-time cinema.

Blue group hint: D’oh!

Purple group hint: Look for hoopster names.

Answers for today’s Connections groups

Yellow group: Salad ingredients.

Advertisement

Green group: Classic films.

Blue group: The Simpsons characters.

Purple group: Ending in NBA players.

Read more: Wordle Cheat Sheet: Here Are the Most Popular Letters Used in English Words

Advertisement

What are today’s Connections answers?

completed NYT Connections puzzle for April 27, 2026

The completed NYT Connections puzzle for April 27, 2026.

NYT/Screenshot by CNET

The yellow words in today’s Connections

The theme is salad ingredients. The four answers are ranch dressing, red onion, roasted chicken and Romaine lettuce.

The green words in today’s Connections

The theme is classic films. The four answers are Rain Main, Rear Window, Reservoir Dogs and Roman Holiday.

Advertisement

The blue words in today’s Connections

The theme is The Simpsons characters. The four answers are Radioactive Man, Ralph Wiggum, Reverend Lovejoy and Rod Flanders.

The purple words in today’s Connections

The theme is ending in NBA players. The four answers are Raging Bull, Regina King, roe buck and rotary clipper.

Source link

Advertisement
Continue Reading

Tech

Microsoft Visual Studio Professional 2026 is down to $35

Published

on


Visual Studio has never really been the lightweight option. It’s not the tool you open just to tweak a config file or write a quick script. It is the big Windows development environment, the one built for full applications, larger codebases, serious debugging, enterprise workflows, C++, .NET, cloud services, web…
Read Entire Article
Source link

Continue Reading

Tech

Forced Windows updates can now be paused forever

Published

on

No more getting caught by a forced Windows 11 update while you’re in the middle of a meeting or a match. Microsoft announced some major changes coming to Windows Update on its blog, including the ability to indefinitely pause Windows updates, 35 days at a time.

To give users more control, Windows Update introduced the option to extend update pauses as much as users want. Once you opted to pause updates for Windows 11, you won’t be disturbed for 35 days at a time, but you can now reset this 35-day limit for as long as you want. You should eventually install these updates, as most of them are usually related to security upgrades and only sometimes require emergency fixes, but Microsoft is letting users decide when to do so. Microsoft’s Aria Hanson wrote in the blog that these changes were a result of feedback that consistently mentioned “disruption caused by untimely updates and not enough control over when updates happen.”

Beyond the update pauses, Microsoft is ensuring Windows 11 users always have the option to shut down or restart their devices without updating. These quality-of-life upgrades build on another recent change that allowed users to skip updates while setting up their new Windows devices. According to Microsoft, the latest Windows Updates features are currently rolling out to those enrolled in the Windows Insider program, specifically users in the Dev and Experimental Channels.

Source link

Advertisement
Continue Reading

Tech

Ikea’s New Blow-Up Chair Was Tested by Cats

Published

on

A blow-up chair? Ikea has been here before. It attempted to make inflatable furniture in the mid-1990s, when designer Jan Dranger came to the Swedish company with a revolutionary idea to solve one of its biggest challenges: how to squish sofas into its preferred flat-pack format, simplifying transport and cutting costs.

It sounded like the perfect solution. Made from durable and recyclable polyolefin plastic, the chair and sofa designs could be inflated at home using only a hair dryer. Transport volumes would be cut by as much as 90 percent. Sadly, only after the “a.i.r” collection launched in the 2000 catalogue did Ikea’s ambitions become deflated.

Staff in stores said that the easy chairs and sofas looked like groups of “swollen hippos” in the furniture displays. Customers forgot to set their hair dryers to cold before inflating. Hot air takes up more space than cold air, so inevitably the sofas deflated as the air inside cooled. Even worse, the valves leaked, so after sitting down, an unglamorous farting noise issued from your general direction. By 2013, Ikea killed the a.i.r collection, but it had crucially learned many lessons.

Fast-forward to the present day and now Mikael Axelsson is the intrepid Ikea designer who has decided to give blow-up furniture another try for the brand’s latest PS collection launching on May 13. However, his $200 inflatable armchair, called (somewhat uninspiringly) the “PS 2026 Easy Chair,” has had a stranger birth than any other of the 2,000 products Ikea releases each year. To start, he’s been sitting on this particular idea for 12 long years after he initially fashioned a Barbie-sized mock-up from foam and wire in 2014—just one year after the original a.i.r collection burst.

Advertisement
Image may contain Baby Person Furniture Chair and Cosmetics

Axelsson’s first model of the PS 2026 Easy Chair.

Courtesy of IKEA

Image may contain Helmet and Stretcher

The tubular chrome frame prototyping.

Courtesy of IKEA

At the time, the trouble was not merely that Axelsson struggled to figure out how to make an inflatable cushion feel more like foam and less like a beach ball; Ikea was also wary of returning so soon to the flatulent debacle that was its inflatable furniture failure. So his model was shelved, literally, in his office. Then, in 2023, Axelsson and the rest of the in-house team were summoned to drum up innovative designs for an upcoming PS collection, and he saw a chance to breathe life back into his inflatable easy chair concept.

Deciding to stick with his original tubular chrome frame idea, Axelsson hand-welded 20 prototypes himself, a skill acquired from growing up around his father’s metal workshop, but the beach ball problem remained.

Advertisement

“I remember when Mikael met with this guy who repairs tractor tires, and he came with the inner tube of a tractor,” Johan Ejdemo, Ikea’s global design manager, tells me. They put that in a concept chair. Better, but not perfect. Eventually, they struck upon the idea of a dual-chamber seat. “It’s one outer air section, and then one central air section,” Ejdemo says. “And you can regulate the comfort yourself, depending on how much you pump it up.”

Source link

Advertisement
Continue Reading

Tech

Hackaday Links: April 26, 2026

Published

on

It’s been three weeks since the Artemis II crew returned to Earth, and while the mission might be over for Reid Wiseman, Victor Glover, Christina Hammock Koch, and Jeremy Hansen, the work is only just beginning for engineers back at NASA. In a blog post earlier this week, the space agency went over the preliminary post-mission assessments of the spacecraft and its ground support equipment, and detailed some of the work that’s currently taking place as preparations begin for Artemis III.

During Artemis I, higher than expected damage was noted on both the Orion’s heat shield and the Space Launch System (SLS) launch pad. But according to NASA, the changes implemented after that first mission seem to have prevented similar issues this time around. The post also explains that reusable components of the Orion spacecraft, such as the avionics and the crew seats, are already in the process of being removed from Integrity so they can be installed in the next capsule on the production line.

While watching the live stream of the Artemis mission is the closest most of us will ever get to experiencing spaceflight, that doesn’t mean you can’t explore the solar system from the comfort of your own home — or more specifically, your browser. [Sani Huttunen] has created an incredible web-based solar system simulator that lets you explore our celestial neighborhood throughout different periods of time. You can tour the moons of Jupiter, see how the planets aligned on the date of your birth, and even check in on the Voyager probes. There are some very valid reasons to be skeptical about software moving to the web, but we’ve got to admit, this is a very slick demonstration of just how far modern browsers have come.

Speaking of how far things have come, are you ready for a car without a rear window? Polestar certainly hopes so, as their latest model does away with such quaint concepts. The glass panel in the roof ends right around the back headrests, and while the rear of the vehicle does open up for storage, the hatch is completely solid. In place of the traditional mirror, there’s a “high resolution” 1480 x 320 display that shows the feed from a rear-mounted camera.

Advertisement

No, that’s not a typo. At a time when smartphones are shipping with 2K displays, should the driver want to see what’s going on behind their $70,000+ USD electric vehicle, they’re limited to seeing it at a vertical resolution below that of VGA. We’d make a joke about Polestar offering up a “Rearview+” upgrade down the line that would give the driver a higher resolution view, but honestly, it’s getting a little too close to reality to be funny.

If that last one has you wishing for a reminder of simpler times, how about some new software for using the iconic Wii Remote as an input device? The Wii and its revolutionary controllers may be turning 20 later this year, but that hasn’t stopped the dedicated fans. This new wrapper provides accelerometer calibration, infrared tracking, and the ability to remap the Wii Remote’s buttons and create key combos. If you do something cool with it, we’d love to hear about it.

Finally, on the other end of the input spectrum, some details leaked out this weekend about Valve’s upcoming Steam controller — namely, the fact that it will cost players $99 at release. As reported by VICE, a hands-on review of the controller by TechyTalk was accidentally published early on YouTube, providing the public with pricing info ahead of an official announcement.

At first blush, this might seem like a lot of money to pay for a game controller, but it’s actually within striking distance of the sticker price on the standard controllers on the Xbox and PlayStation consoles. Perhaps more critically, it’s around half the price of the official “premium” controller offerings available for the aforementioned systems. Is it really any wonder that we’ve got cars without rearview mirrors when folks are putting down 200 bucks for a fancy PlayStation controller?

Advertisement

See something interesting that you think would be a good fit for our weekly Links column? Drop us a line, we’d love to hear about it.

Source link

Advertisement
Continue Reading

Tech

'Pluribus' & 'Come See Me In The Good Light' win Peabody awards for Apple TV

Published

on

Of the five nominations for the 86th Peabody Awards, Apple TV scored two wins. “Pluribus” won in the entertainment category, while “Come See Me In the Good Light” won in the documentary category.

Bright yellow background with bold black text PLUR1BUS beside a petri dish of yellow liquid, where a hand uses a cotton swab to draw a smiling face.
‘Pluribus’ brings home a Peabody award for Apple TV

Apple continues to rake in the awards with its original programming. At last count, Apple TV has 3,431 award nominations and 797 wins.
The results from the Peabody Awards are in, and Apple TV can add two more wins to its list. Five of its shows were nominated.
Continue Reading on AppleInsider | Discuss on our Forums

Source link

Continue Reading

Tech

Truecaller faces mounting pressures as its growth matures

Published

on

Truecaller is one of the world’s most widely used caller identification platforms, with more than 500 million users. Now it’s entering a more challenging phase as growth slows in its largest market and competition intensifies across telecom networks and smartphone platforms.

Much of Truecaller’s growth has been driven by India, which accounts for over 350 million users, or about 70% of its global base. The volume of spam and unwanted calls has turned the app from a simple caller ID service into a more embedded layer of everyday communication.

That position is now shaping its next phase. The company has introduced features such as AI Assistant and Family Protection to drive monetization, alongside tools like Community Suggestions to stay relevant as competition intensifies. This comes as telecom-led solutions such as Calling Name Presentation (CNAP), dedicated number series for verified business calls, and AI-based spam protection gain traction in India. Meanwhile, smartphone makers including Apple and Google continue to build caller identification and spam-blocking capabilities into their operating systems.

As competition increases, Truecaller’s growth is starting to slow. Data shared with TechCrunch from Sensor Tower shows downloads from India fell 16% year-over-year in 2025, while global downloads declined 5%, marking a reversal after several years of growth. Separate data from Appfigures shows downloads peaked at 175 million in 2021, dropped sharply in 2022 and have since hovered around 120 million annually.

Advertisement
Image Credits:Jagmeet Singh / TechCrunch

India remains Truecaller’s largest market, but its share of downloads has declined from over 70% at its peak to the mid-50s in recent years, pointing to a gradual shift in new user growth toward other markets.

Truecaller’s shift in growth dynamics is being closely watched by investors. The company’s shares have fallen about 78% since its 2021 IPO and are down around 37% so far this year, underscoring investor concerns about its growth outlook and business model. Chief Executive Rishit Jhunjhunwala told TechCrunch that one of the key questions from investors has been around the impact of CNAP in India. He also acknowledged recent headwinds in parts of the business, without elaborating further.

CNAP, an initiative pushed by India’s telecom regulator and is being implemented by telecom operators, displays caller names based on KYC records at the network level without requiring third-party apps. This overlaps with part of Truecaller’s core offering, but is more limited in scope.

Techcrunch event

San Francisco, CA
|
October 13-15, 2026

Advertisement

Truecaller’s Jhunjhunwala said the company does not see CNAP as a disruption but as validation of the problem.

“Truecaller operates as a global platform with a much richer and dynamic intelligence layer — spanning spam detection, fraud prevention, business identity, and user context across calls and messages,” he said. “This allows us to go significantly beyond basic caller ID.”

Advertisement
Truecaller’s Community Suggestions show user-generated context about incoming callersImage Credits:Truecaller

Bharath Nagaraj, director of equity research at Cantor Fitzgerald, said CNAP could slow user growth but is unlikely to materially disrupt Truecaller’s core business in the near term. Instead, he pointed to pressure in the company’s advertising segment — driven in part by changes from Google — as the more immediate challenge.

“If you look at the earnings for the company, 65%–70% of it now comes from ad revenue. And that impacted recently,” Nagaraj told TechCrunch.

In its last earnings call (PDF), Truecaller said that it lost roughly one-third of ad traffic from its largest partner in August 2025 — a partner analysts on the call identified as Google. Jhunjhunwala attributed the drop to an unresolved “algorithm issue,” while CFO Odd Bolin said the partner still accounts for more than a third of total revenue. The company is now adding new partners and building its own ad exchange to reduce dependence on any single platform.

But even moving to an in-house ad exchange may not fully address the challenge. Advertising remains highly competitive, with brands able to spend across multiple digital platforms, said Nagaraj. “You can show your ads on Truecaller, but you can also show them on Facebook,” he said.

In-app revenue continues to grow

The pressure on advertising comes even as other parts of Truecaller’s business are on a different trajectory. Data from Appfigures shows that while downloads have plateaued in recent years, gross in-app revenue has risen sharply — from $600,000 in 2017 to $39.3 million in 2025. It has already reached $13.4 million this year as of April 20.

Advertisement

Monthly revenue generated by in-app purchases on Truecaller is now consistently above $2 million and still climbing, per Appfigures.

Image Credits:Jagmeet Singh / TechCrunch

Truecaller’s presence on iOS has also grown from less than 5% of its total downloads in 2020–2021 to around 11–12% in recent years, per Appfigures, highlighting a shift toward higher-value markets. The company has stepped up efforts on Apple’s platform, including launching real-time caller ID for iPhone in early 2025 and rolling out feature updates to improve parity with its Android app.

Nonetheless, Apple recently expanded its call-screening capabilities, which could reduce the need for third-party apps among iPhone users.

Another key pillar of Truecaller’s monetization strategy is its enterprise offering, Truecaller for Business, which enables companies to verify their identities and communicate with customers via calls and messaging. The segment has been growing steadily, with revenue rising 39% in constant currency in 2025. Truecaller’s Jhunjhunwala said the company is expanding the platform globally by opening its chat services to partners and offering tools such as verified business caller ID to help enterprises verify identity and reach customers.

Alongside its enterprise push, Truecaller has also been expanding its consumer subscription business, which has over 4 million paid subscribers globally, as more users opt for features such as advanced spam protection, AI-based call screening, and an ad-free experience.

Advertisement

In the past, Truecaller has been criticized over how it builds and maintains its vast database of phone identities. An investigation by The Caravan raised questions about consent and data collection practices, particularly in India, where data protection laws have so far been less stringent. Truecaller has denied wrongdoing and maintains that it complies with applicable regulations, but the debate underlines the broader challenge of balancing utility, scale, and user privacy.

Despite all these challenges, Truecaller sees significant room for growth. The company is focused on addressing the rising complexity of communication, Jhunjhunwala said, as spam and scam calls become more sophisticated with advances in AI. Similarly, it plans to expand across all three revenue streams — advertising, enterprise services, and premium subscriptions — as it looks to sustain growth across markets. Whether that will be enough, however, may depend on how quickly it can adapt as caller identification shifts from standalone apps to the network, and to the phone itself.

When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.

Source link

Advertisement
Continue Reading

Tech

BYD’s Denza Z Drops Its Roof on Over a Thousand Electric Horsepower

Published

on

BYD Denza Z Electric Supercar Open-Top
Attendees at the 2026 Beijing Auto Show strolled inside the main hall and were greeted by BYD’s Denza Z series convertible, a four-seater with a soft top that neatly folds up into the rear deck. Much of the automobile, including body panels, seats, and structural components, is made of carbon fiber, which helps to reduce weight and improve handling. When things get really fast, a tiny air vent on the bonnet helps to increase airflow and give the car a little extra downforce.



This car’s design was penned by a team directed by Wolfgang Egger, Audi’s former head of styling, who has a keen sense of style. Smooth curves and exquisite features combine to make the car look attractive without going overboard. The doors are beautiful and long, with no handles visible, but the large wheels and brilliant brake calipers provide a good idea about the beast of a car hiding underneath. We noticed one car painted in a wonderful sheen blue-green that looked amazing in the hall.

Sale


Segway Ninebot S2 Electric Self-Balancing Scooter – Master Your Commute w/t 11.2 mph Max. Speed, 21.7 Mi…
  • Speed & Range: Experience exhilarating rides with the Ninebot S2’s impressive top speed of 11.2 mph and range of 21.7 miles.
  • Beginner-Friendly: Perfect for riders aged 16-50, the Segway S2 features a user-friendly learning mode, providing a smooth and gradual introduction.
  • Adjustable & Supportive: Enjoy a customized fit tailored to your needs, as the Segway S2 accommodates heights ranging from 4’3″ to 6’6″ and supports…


Under the hood, or rather, beneath the floor, is a trio of electric motors that work together to drive all four wheels using Denza’s E3 system. And what a power bump, with well over 1,000 horsepower. It can accelerate from zero to sixty-two miles per hour in less than two seconds flat! They used the DiSus-M magnetorheological suspension from the Yangwang U9 and added features such as predictive road scanning and full chassis control, allowing the car to corner like a dream even while the roof was down. The steering is also steer-by-wire, which keeps things feeling quite sharp and responsive.

Advertisement

BYD Denza Z Electric Supercar Convertible
The car is powered by BYD’s latest Blade Battery, which rests low on the floor and supports Flash Charging 2.0. That means a full charge can be achieved in as little as five minutes at the appropriate charging station. The same battery pack is used in a few different models, providing ample range while remaining smooth on the inside. They also have several advanced driving aids, all gathered under the Eye of the God suite, which supports in day-to-day tasks while also adding some extra safety measures for longer journeys.

BYD Denza Z Electric Supercar Convertible
The four seats inside the automobile are placed in a way that makes the back row feel functional rather than crowded. A large screen dominates the center of the dashboard, flanked by a digital instrument panel and a wireless charging station. The central console has a neat and easy button layout for climate control and drive mode. The materials seem high-quality while remaining nice and utilitarian, and the tri-color accents on the display model provide a wonderful touch of flair.

BYD Denza Z Electric Supercar Convertible
Denza plans to ship the convertible to Europe first this summer. Following that, it will make a complete global debut at the Goodwood Festival of Speed in July. In case you’re wondering, the car will also perform some demonstration laps there. They’re still doing track testing at the Nürburgring, and they anticipate to have proper lap times shortly. Chinese buyers will have to wait till after the worldwide deployment is complete. The car will be available in three versions: normal, open top, and dedicated track edition.

BYD Denza Z Electric Supercar Convertible
In terms of price, it will be significantly less expensive than its competitors. Early estimates in China range between 400,000 and 500,000 yuan, or $59,000 to $73,000. That places the Denza Z in the same category as the Maserati GranCabrio, but with more power and faster charge, making it a really fantastic offer all around. Prices in Europe will be published closer to the time the automobile goes on sale.
[Source]

Source link

Continue Reading

Tech

Today’s NYT Mini Crossword Answers for April 27

Published

on

Looking for the most recent Mini Crossword answer? Click here for today’s Mini Crossword hints, as well as our daily answers and hints for The New York Times Wordle, Strands, Connections and Connections: Sports Edition puzzles.


See those circles in the grid of today’s Mini Crossword? All of them will contain the same letter, when you’re done. Read on for all the answers. And if you could use some hints and guidance for daily solving, check out our Mini Crossword tips.

If you’re looking for today’s Wordle, Connections, Connections: Sports Edition and Strands answers, you can visit CNET’s NYT puzzle hints page.

Advertisement

Read more: Tips and Tricks for Solving The New York Times Mini Crossword

Let’s get to those Mini Crossword clues and answers.

completed-nyt-mini-crossword-puzzle-for-april-27-2026.png

The completed NYT Mini Crossword puzzle for April 27, 2026.

Advertisement

Mini across clues and answers

1A clue: Word for “dad” in Spanish, Italian, Russian and Hindi
Answer: PAPA

5A clue: Go crazy, as a crowd
Answer: ERUPT

7A clue: Drink with a red, white and blue logo
Answer: PEPSI

Advertisement

8A clue: Philadelphia M.L.S. team
Answer: UNION

9A clue: Buddy
Answer: PAL

Mini down clues and answers

1D clue: Make more exciting
Answer: PEPUP

2D clue: Madison Square Garden, e.g.
Answer: ARENA

Advertisement

3D clue: Center of the eye
Answer: PUPIL

4D clue: Lhasa ___ (dog breed)
Answer: APSO

5D clue: Element #50
Answer: TIN

Advertisement

Source link

Continue Reading

Trending

Copyright © 2025