Filling up your gas tank stings right now. I go to Costco specifically to save money on gas, and even there, I’m spending at least $15 more than usual to fill up my Volkswagen Jetta. If you drive a truck or an SUV, you already know a trip to the pump can run you well over $100.
Summer is right around the corner, which usually means lake days, beach runs, road trips, and generally getting out more often. That also means using gas to get there. With gas averaging over $4.50 per gallon nationally, every little trip adds up faster than it used to.
Advertisement
That got me thinking about the trips that probably don’t need a car at all, like quick grocery runs, going to a coffee shop down the road or going to the gym for a daily workout. For those kinds of trips, an electric scooter starts to make a lot of sense.
While an electric scooter won’t take you on a multi-hour summer road trip, it’s a solid alternative to those short drives we make without thinking about them. So I tested out the Gyroor C1 Pro and dug into the data to find out how much money it can actually save you on those short, everyday trips.
We do the math: E-scooter vs. gas car
Before buying an electric scooter, it helps to know if it will actually save you money or if it just feels like it does. So, let’s run the numbers.
AAA puts the national average for regular unleaded gas at $4.52 per gallon. If your car gets 25 miles per gallon, which is typical for a sedan, you’re paying about 18 cents per mile.
Advertisement
The Gyroor C1 Pro gets you up to 25 miles on a single charge. You plug it into an outlet, like you would a laptop, and you can get back to a full battery in about 5 hours. The scooter runs on a 36-volt 10.4Ah battery with a total capacity of 374 watt-hours. Watt-hours measure how much energy a battery can store. The higher the number of watts, the farther you can go on one charge.
The national average electricity rate is 17.65 cents per kilowatt-hour, according to the Energy Information Administration. At this rate, a full charge costs about 66 cents. That works out to $0.003 per mile, which is 60 times cheaper per mile than driving a gas car.
Here’s the formula we used to get there:
Cost Per Mile = (Battery Capacity in Wh ➗1,000) X Electricity Rate per kWh / Range in miles
Advertisement
$0.003 per mile = (374 ➗ 1,000) X $0.1765 ➗25
Comparing the cost of a gas car vs. an e-scooter
If you swap out one short car trip per day at about 3 miles each way, that’s 168 miles a month that you no longer need gas for. In a realistic sense, this looks like your coffee run, a trip to the gym or another errand you’ve been driving to out of habit. Here’s how the cost compares for using the Gyroor C1 Pro electric scooter versus a gas car.
Costs of a gas car vs. an e-scooter
Comparing the costs of a gas car versus an e-scooter.
For the same 18 cents it costs to drive one mile in a gas car, you could ride the Gyroor C1 Pro about 60 miles. Replacing just one daily short trip with an electric scooter saves you nearly $30 per month. Make it a habit and swap a second trip, and you’re looking at closer to $60.
If you drive a truck or large SUV that gets lower gas mileage than a typical sedan, your savings will be even higher. Either way, charging an electric scooter costs significantly less than filling up at the gas pump.
Advertisement
Hidden savings add to that total. Car ownership comes with several costs that add up over the year, such as registration fees, oil changes and insurance. As someone who hates paying for parking, being able to lock up to a bike rack for free makes my day every time.
At $30 in monthly savings, the Gyroor C1 Pro pays for itself in about 15 months at its current sale price of $460 (regularly $600) before you add in savings from parking and other car-related fees. A well-maintained electric scooter can last three to five years, meaning years of savings after the scooter has paid for itself. If you’re filling up weekly, you’ll burn through that same $459 in less than two months at current gas prices.
Gyroor C1 Pro
The Gyroor C1 Pro’s sibling scooter, the C1S, made CNET’s best electric scooter list as the top pick for backpack-free errands. The C1 Pro takes everything CNET loves about the C1S and adds more range, power and a higher weight capacity (at a slightly higher price).
I had never ridden a seated scooter before, so the motion took a ride or two to click. But the whole experience of riding a scooter is so much fun, it makes my inner child come out in full force. The seat is comfortable, so you can actually enjoy the ride instead of wanting to get it over with. It comes in pink or green, so you can show a bit of personality with your ride.
Advertisement
The basket storage is a major part of what makes it great for everyday use. On a standing scooter, you’re stuck with a backpack and whatever fits inside it. The C1 Pro’s storage is spacious enough to carry groceries and a work bag without putting any of the stress on your shoulders and back.
The LED display shows your speed and battery level, so it’s easy to stay aware of your pace. There is also a headlight built in for nighttime rides, which is super helpful if you’re in an area with fewer street lights. The dual suspension keeps the ride smooth and easy to stay steady on two wheels. When I pushed the scooter to its highest speed (18.6 mph), it felt quick but not scary.
The 25-mile range comfortably covers most of my daily use cases. Plug it in overnight and you can start the morning with a full charge.
Advertisement
The C1 Pro’s display panel shows speed and battery life.
Faith Foushee/CNET
The reality check: Minor negatives
Where you live plays a big role in how much you get out of this scooter. If you’re in a city with mild weather, bike lanes and greenways, the C1 Pro fits into daily life pretty seamlessly. In areas with frequent heavy rains or harsh winters, the riding season will be shorter and slow the payback period. However, the battery compartment is sealed, and the IPX4 rating handles a light drizzle, but I wouldn’t recommend riding it through a storm.
Bike lanes and existing scooter culture make a big difference. In cities where sharing the road with scooters and bicycles is already normal, the transition is smoother. Areas without that infrastructure take more adjustment as you’re learning to ride as an exposed person next to traffic. I recommend finding the routes that fit you, including backroads, greenways and less hectic areas if possible. It’s not always the fastest route, but it can be a lot more enjoyable.
At 48 pounds, it’s not the lightest scooter on the market, but that’s due to the trade-off of having a seat, dual suspension and basket storage. It folds down easily enough to load into a trunk or to store away when you’re not riding. I wish it could fold small enough to fit in a suitcase and travel with me everywhere.
Advertisement
One other thing worth noting is that this scooter is best for a single rider. You could fit a small or medium-size dog in the basket, but it’s not the best scooter for shuttling kids around or running family errands together.
Off for another errand.
Faith Foushee/CNET
Car vs. electric scooter: The verdict
If your daily routine involves a handful of short trips you could easily make without a car, the Gyroor C1 Pro electric scooter will quickly pay for itself and then some. It’s a great fit for your office commute, or for a quick ride to a coffee shop, gym, grocery store or getting around a college campus. It allows you to skip the traffic, eliminates parking fees and costs a fraction of what a gas car does per mile.
Advertisement
It’s not the right fit for families moving more than one person or for those in a climate that would limit you to riding for only a few months of the year.
Replacing just one car trip a day with the Gyroor C1 Pro can save you around $30 a month, and you’ll have fun while doing it. If you go with the pink one, you’ll be twinning with me. At its current sale price of $460, it’s a fraction of what you could spend on gas this summer alone.
The blog Linuxiac reports: A new systemd fork has appeared with a specific purpose: removing systemd’s recently added support for storing a user’s birth date in JSON user records.
The fork, called Liberated systemd, published its first tagged release as v261 shortly after the official systemd 261 release. In other words, the fork follows upstream systemd while reverting the change that added the new optional birthDate field.
Importantly, this is not a new init system, a wider redesign of systemd, or a general-purpose alternative to the upstream project. Its stated purpose is to remain close to upstream systemd while removing what the author describes as “surveillance enablement”… The author recommends testing the fork in a virtual machine before using it on real hardware and warns nightly builds are more likely to be unstable than named releases.
After five films, digital technology has finally arrived in the cloth-and-plastic world of Toy Story. But the film, directed by franchise veteran Andrew Stanton and McKenna Grace, mostly avoids the easy trope of making technology inherently bad. Instead, it’s a disruptive force that can be either helpful or harmful, depending on how it’s used. The film makes the case that parents need to take a hands-on approach to help kids manage their gadgets, especially when it comes to managing screen time or dealing with bullying.
Slight spoilers ahead for Toy Story 5.
Toy Story 5 centers on Bonnie, a young girl struggling to make friends who was gifted Woody, Buzz and Andy’s other toys from the first three films. She’s the only kid in her neighborhood not using a Lilypad tablet — instead, she prefers to play the old fashioned way, by crafting scenarios purely out of her imagination. Her parents reluctantly decide to get her a Lilypad (played by Greta Lee) as a way to connect with other kids.
Like a McKinsey consultant storming into a quaint local business, Lilypad decides she knows the best way for Bonnie to make friends. The tablet sends friend requests to several girls Bonnie knows, and she miraculously gets an invite to a sleepover. But instead of playing together, all of the girls just zone out endlessly on their Lilypads, barely saying a word to each other. Those same girls later start bullying Bonnie for playing with older toys, which leads to Bonnie’s parents wisely disabling the Lilypad’s social network access.
Advertisement
Pixar
It might seem crazy that parents even have to worry about social networking for 8-year-olds, but platforms like Zigazoo and JusTalk Kids already exist. They market themselves as safe spaces where kids can chat with close friends and family members, but there’s still room for awful social dynamics. Kids will be kids, and many of them are little jerks.
While Lilypad stumbles to help Bonnie connect, older toys like Cowgirl Jessie (Joan Cusack) also realize they’re out of touch with the way kids play today. When Jessie tries to sneak her way into Bonnie’s sleepover, she immediately becomes a source of shame.
Research shows a relationship between managing anxiety and imaginative play in kids, and Toy Story’s main cast make convenient messengers for that information. But the film surprised me by finding ways to make room for Lilypad and other new devices. A messageboard app on Lilypad helps Bonnie connect with Blaze, another young girl who still plays with toys the old fashioned way. Without Lilypad, they probably never would have met.
It’s hokey, but it works in the context of the film. And it’s also the reality parents have to live with today. Despite their potential harms, it’s helpful for kids to sometimes watch TV on the go. There are tons of educational games on iPadOS and Android, and both platforms also have a bevy of video chatting apps for staying in touch with friends and relatives. The key is moderation and parental supervision.
Toy Story 5 would be even more of an insightful critique if it made room for new types of play. Lilypad just has a few basic games for kids. But these days, any iPad can play Minecraft, a game that is appealing precisely because it so closely mirrors imaginative play. It’s also complex enough to grow with kids into adulthood, more so than the likes of Woodie and Buzz Lightyear.
Advertisement
Now that tablets have entered the world of Toy Story, it’s unclear where the franchise can go next. Pixar has already wrung the series’ core concept dry. We’ve explored the inner lives of toys, we’ve seen them wrestle with the meaning of their existence and they’ve even confronted death directly. (Toy Story 3 must have traumatized an entire generation.) Toy Story 5 isn’t nearly as essential as the original trilogy, but at least it’s a reminder to parents that they can’t just sit back and relax when it comes to tech.
Putting hidden data in places where few expect it can be a fun hobby or even a professional career. In the case of [Tim Wehrle] it’s just the former. His most recent project in this area uses a favicon image for storing a HTML-based website and rendering its contents within the browser after the favicon has been downloaded.
To pull this off, a very basic HTML page was turned into a series of UTF-8 encoded bytes that were then declared to be a standard PNG image. The original 208 byte payload plus 4-byte PNG header only used part of a 9×9 pixel favicon. With a larger favicon image as typically used you could thus easily store more data, whether as visual noise like here or a bit more hidden.
Of course there’s a catch, and in this case it’s the Typescript code to unpack the bytes from the “image” and render them; you have to load that separately. But still, in these days of all-singing, all-dancing websites that take forever to render, it’s refreshing to see what you can do with so few bytes that they fit in a favicon.
As for the purpose of such an approach, that’s left as an exercise for the reader, but you’re more than welcome to take a poke at the GitHub project and the demonstration site..
Apple’s home automation updates and new product roadmap powered by Siri AI will kick off in 2026 with HomePod and Apple TV updates, but if you’re excited for the robotic arm for a Home Hub, you’re going to be waiting a while.
It’s no secret that Apple’s new AI push will include several new products like the long-rumored Home Hub. However, the timing of some of those products’ releases remains in question.
The Home Hub itself is expected in 2026 as well, which means an Apple Home-focused release cycle or event could occur in the fall. That device should launch as a standalone display that can be paired with various mounts like speakers, wall mounts, and articulating arms.
Advertisement
The new Apple TV is expected to support Apple Intelligence in some specific capacity and may have a new Siri Remote. The HomePod mini would also gain access to Siri AI, but that’s likely the only major feature of the product.
The robotic arm accessory for the Home Hub, which may include an upgraded AI-focused version of the tablet device, isn’t expected until 2027 or 2028. That device has always been more of a moonshot, with the Pixar Lamp-like device with a personality still in early testing.
It’s not really a question of if these products are coming, but when. With everything else releasing, Apple will need to find time to reveal its new Home Hub product category and sell people on why the new Apple TV and HomePod mini are necessary.
Advertisement
The September keynote will already be packed as it is, and I don’t think these products will fit the “just drop a press release” model. My expectation is that there will be a lengthy Apple Home segment during a primarily Mac-focused keynote in October.
So you have a project that you love, and everyone else loves too. People start saying “you should sell this” but where? Well, there’s a new marketplace you might want to consider called called SmallRun, aiming at makers and their, well, small production runs.
SmallRun will absolutely host your custom PCBs, on-demand 3D prints, and other traditional maker products — but they’ll also happily sell your merch, too. Along with electronics and hardware, they aim to allow you to sell products in categories like tabletop gaming, sciences, and yes, accessories/apparel.
For sellers, they offer automatic payouts and promise to take care of the taxes by integrating with Stripe. That said, they’re still working on getting the whole VAT thing set up for products imported to the EU. EU to EU sales are apparently OK. They’ll host build logs, which may drive engagement with your product. There’s even a handy tool to import your existing listings from eBay, Tindie, Lectronz, Etsy, Shopify, or Crowd Supply if you’re already in the biz. They make their money by taking a cut of your sales: eight percent, plus forty cents per listing.
Depending on your perspective, you might wonder if we need another marketplace, To that we can only say: “Let a thousand flowers bloom!” Competition should drive these marketplaces to continuously improve and we all win.
Apple wants you to step into a virtual world, while Snap wants you to stay in the real one. Here’s how their very different approaches to spatial computing compare.
Apple Vision Pro [left] vs Snap Specs [right]
The launch of Snap Specs at Augmented World Expo on June 16 is a big shift forward for the social company. After the previous effort of Snap Spectacles, Snap Specs are a step closer to the augmented reality future by being smart glasses with a built-in display. This is something that brings Snap’s efforts in line with the Ray-Ban eyewear that Meta has produced, including its yet-to-ship Meta Ray-Ban Display. It’s also a massively different product from Apple’s own head-mounted computing device, the Apple Vision Pro. Continue Reading on AppleInsider | Discuss on our Forums
On the latest episode of TechCrunch’s Equity podcast, Sean O’Kane, Rebecca Bellan, and I discussed what actually prompted the administration’s moves against Anthropic, and what this might mean for the broader AI ecosystem.
As Sean put it, “Anthropic has not had the best relationship with the Trump administration in a way that stands apart from the other leading AI labs,” so perhaps other Anthropic’s rivals don’t need to worry about a similar crackdown.
But Rebecca also noted that leading cybersecurity experts have “signed an open letter to ask Trump to revoke the order, and they say it’s actually dangerous to have to pull these advanced cybersecurity capabilities from network defenders in the U.S.”
Advertisement
And we wondered whether this could all end up being good publicity for Anthropic, especially since — in Rebecca’s words — “everybody loves a bad boy.”
Keep reading for a preview of our conversation, edited for length and clarity.
Rebecca Bellan: As I’m sure many of our listeners know, the U.S. government basically just forced Anthropic to pull its two newest models offline — Fable 5, and then there was also Mythos 5, which was the one that was available to current Mythos users, [whereas] Fable 5 was more available to the public.
They sent a letter [last] Friday that cited “national security concerns.” No one knows what those concerns are. That report has not been made public, they gave no specifics and told [Anthropic] that they had to ensure that those models couldn’t be used by any foreign nationals. So Anthropic was like, “Okay, I guess we have to just pull the models entirely, because we don’t know when someone’s a foreign national. A lot of our own employees are foreigners.”
Advertisement
But really, [reports said] the White House got tipped off to this because of some Amazon researchers that allegedly found a way to bypass Fable 5’s guardrails. Amazon CEO Andy Jassy raised these concerns with the White House, and it just kind of spiraled from there.
Sean O’Kane: This all moved really fast, especially for a Friday afternoon into a weekend. And it’s at the same time that the administration was ostensibly trying to negotiate some sort of treaty for the war that it started in Iran.
Rebecca: Friday evening for us in New York. They love a distraction.
Sean: Let’s step real far back for a moment. Anthropic has not had the best relationship with the Trump administration in a way that stands apart from the other leading AI labs — I think there’s an element, at least, of that playing here.
Advertisement
So do you think that this is going to have implications for those other companies? Do you think that the Trump administration would be less inclined to sort of turn off the tap on one of those competitors?
Anthony Ha: Part of the context here is that both the reporting and an analysis from independent security experts suggest that the actual security risk from Anthropic is not that unique. So a lot of this seems to stem as much from parts of the Trump administration and Anthropic just [not getting] along very well. Whatever risks there are, those things are gonna blow up out of proportion just because it seems like they can’t have a civil phone call with each other.
If you’re another company — on the one hand, maybe that’s advantageous to you, because you can say, “Well, we just don’t get these guys mad at us and we can do what we want.” But that’s also not a great regulatory landscape to just [say], “Boy, I hope they don’t get mad at us.”
Rebecca: On the one hand, it definitely feels retaliatory — after the government labeled Anthropic a supply chain risk, there’s this big lawsuit going on between them, it really feels like the White House is just looking out for any excuse to pummel Anthropic. And I feel that way not only because that was my initial reaction, but because of what a lot of cybersecurity researchers have said. They say that this should never have triggered an export control [order]. They’ve all signed an open letter to ask Trump to revoke the order, and they say it’s actually dangerous to have to pull these advanced cybersecurity capabilities from network defenders in the U.S. Anthropic itself said some of the same jailbreaks could have been found in several other AI models.
Advertisement
Cynically, it’s like: Okay, are you just pausing Anthropic so that others can catch up to where Anthropic was?
But at the same time, I’ve also seen reactions that [say]: Anthropic kinda had this coming. They’re like, “This is too dangerous for anyone to use, but not us, we’re the good guys.” They’re talking out of both sides of their mouth. A week before Fable came out, they were [saying], “Hey, we need to slow down AI, guys. It’s getting really dangerous.” But then boom, “Here’s our most insane ever, super powerful model, go off.”
Anthony: In some ways this feels like a microcosm of a lot of the discussion around AI, where people like Sam Altman and Jensen Huang are [saying], “Hey, let’s try to lower the temperature. Why is everybody mad at us?” Well, you spent the last couple years essentially saying you’ve built this God machine that will take jobs away from everyone. It’s not exactly a shock that people don’t feel great about this.
And there’s something about the way Anthropic talks about Mythos in particular, where they’re like, “This is the most incredibly powerful model ever, it’s too dangerous to release to the public.” And so on some level, [you say,] “Well, okay, let’s say that we take that seriously then. That means that there’s going to be an incredible level of scrutiny around it.”
Advertisement
And I do wonder — it does seem like Anthropic is not happy about this. I want to be careful about not overstating how this could be beneficial to them. But we also ran some stories about Ramp analysis to highlight the fact that the last big blow-up between Anthropic and the Trump administration was good for the company, in at least some ways. Downloads of Claude shot up. I think a lot of people who maybe had thought of ChatGPT as the chatbot, the AI assistant before, suddenly they were looking at Claude as maybe the more responsible one, the more “resistance” one.
And in the same way, [while] Anthropic is very stressed out about this, this could, again, make their models seem even more powerful.
Rebecca: Definitely. “We’re so dangerous.” Everyone loves a bad boy, right? Everyone’s like, “It’s the most powerful model, even Trump says so. Of course, I’ve got to get my hands on it.”
When you purchase through links in our articles, we may earn a small commission. This doesn’t affect our editorial independence.
“There’s a revolution in battery technology hiding in plain sight,” reports The Wall Street Journal. “The 3-D printing of batteries has the potential to put energy storage inside any device.
“This will enable lightweight and long-lasting consumer gadgets, long-range military drones and even nanoscale robots.” Almost all the innovations we regularly hear about — from cheaper, tougher electric-vehicle batteries to “Holy Grail” solid-state batteries — are about changing the chemistry of batteries. The promise of battery-tech 3-D printing (aka additive manufacturing) is simple: What if batteries could fill any available space, even structural elements of our gadgets, rather than always taking a rigid shape like a pouch or cylinder?
The new approach has obvious appeal. The entire airframe of a drone could be filled with energy storage for increased range. Smartglasses could have sleek battery-packed frames, so they look like everyday eyewear rather than “Revenge of the Nerds” props. One of the biggest advantages of 3-D printing is that it works with any battery, regardless of its cell chemistry. It could advance today’s lithium-ion as well as emerging sodium-ion and solid-state tech… Some [startups] are trying to use 3-D printing to create efficiencies in existing battery manufacturing systems. A brave handful of startups are pursuing radical new designs and approaches. They’re starting with defense applications, where cost and scale are less of an issue…
At Silicon Valley-based Sakuu… [r]ather than trying to 3-D-print whole batteries, the company is working on replacing one of battery manufacturing’s biggest pain points, says Arwed Niestroj, Sakuu’s chief operating officer, who is also a nuclear physicist and former head of Mercedes-Benz Research & Development North America. Existing battery assembly lines include football-field-long ovens for drying layers of material that have been dissolved in solvents. This requires a huge amount of energy and is a significant contributor to manufacturing costs, a big reason EV batteries aren’t cheaper. Sakuu’s process, under development for years, uses additive manufacturing to lay down key battery components without solvents, eliminating the need for ovens, says Niestroj.
Advertisement
Sakuu is currently working to commercialize this tech with a major battery manufacturer…
Today marks the summer solstice, the longest day of the year and the start of astronomical summer in the Northern Hemisphere. This doesn’t really have much to do with hacking hardware or building gadgets other than the fact that from this point on you’ll have progressively less daylight hours to do it in each day. Of course, if you do your best work in the middle of the night this won’t impact things much.
If you’re as likely to find a controller in your hand as a soldering iron in the evenings, you might be interested in a recent filing against Sony. Lawyers representing a group of four gamers allege that the entertainment giant is violating a California law that says digital storefronts need to make it clear that buyers don’t technically own the games in question but are merely licensing them — a license which, as we’ve seen in the past, can be revoked or modified at any time with no restitution made to the purchaser.
Now while we agree conceptually that selling gamers a license rather than an actual copy of the game is clearly a one-sided deal, we’re still not sure this case has a lot of merit. As far as we can tell, Sony does make it clear in the fine print that you’re not really going to own anything once they take your money. Or, at the very least, they make it equally as clear as any other company that’s selling digital downloads these days. Should the court actually find that said fine print is a little too fine, it could conceivably have ramifications throughout the entertainment industry. This is certainly a case to keep an eye on.
If you want to be sure none of your games can be removed from your digital grasp without warning, perhaps your best bet is to stick to the classics. Fans of 1989’s F-15 Strike Eagle II on PC will be excited to hear that there’s an ongoing effort by Neuvieme Porte to reverse engineer the flight sim and re-implement the whole thing in portable C.
This would open up all sorts of possibilities, such as ports to other platforms and the addition of new features and content. But before the project can get to that point however, Neuvieme is looking to recruit some virtual test pilots. Just keep in mind that the goal, at least for now, is to recreate the game exactly. That means bugs present in the original release are to be preserved. As such, it would help to have logged enough hours back in the DOS days to recognize what’s an OG bug and what’s been newly introduced.
Advertisement
From working on virtual jet fighters to the real deal, IEEE Spectrum recently ran an article about a startup called Phoenix Semiconductor that’s looking to produce bespoke pin-compatible replacements of critical chips for the military. They reason that the Air Force won’t mind paying $1,000 for a chip that cost them a buck back in 1975 when the alternative is grounding a $70+ million F-18 that needs the thing to take off. The goal isn’t really to recreate the old parts as they were, but instead to build drop-in replacements that are tailored for specific applications. In other words, Uncle Sam doesn’t care of the IC actually looks like the original, so long as it fits and it gets the jet up in the air again.
Finally, on the subject of aerospace technology, NASA’s Jet Propulsion Laboratory published a blog post earlier this week detailing their work on the Exploration Rover for Navigating Extreme Sloped Terrain (ERNEST). While NASA’s Curiosity and Perseverance rovers have done some incredible work on Mars, they’re slow and have to be operated with the utmost caution to make sure they don’t get stuck. In comparison, ERNEST is several times faster and is designed with an active suspension system that lets it lift each wheel up off the ground independently if needed.
The prototype rover also features improved autonomy that may allow future rovers make more decisions on their own. That may not be a huge time saver on the Moon, but given the communication delays with the Red Planet, a Mars rover that doesn’t have to stop and ask Earth for directions so often will be able to get more useful work done at the end of the day.
Advertisement
See something interesting that you think would be a good fit for our weekly Links column? Drop us a line, we’d love to hear about it.
The Wall Street Journal reviewed 1,105 videos along with guidance given to creators for crafting their posts.
Polymarket
In case you needed another reason to be wary of those videos showing people winning big on Polymarket, an investigation by The Wall Street Journal has found that the company is paying social media creators to post misleading content promoting the prediction market. Of the 1,105 TikTok videos the publication reviewed, 778 appeared to show someone placing a bet — but a closer look reportedly revealed that none of the latter featured the actual Polymarket website, instead using dummy sites made to look like the real thing.
For more than half of the videos that appeared to show winning bets, those bets would in reality have been losses, The Wall Street Journal reports. The publication spoke to creators who worked with Polymarket and viewed materials they say they were given to ensure their videos were convincing and engaging. In addition, Polymarket reportedly also enlisted a “social-media army” to repost these videos and help them go viral.
You must be logged in to post a comment Login