Connect with us

Tech

HP Introduces First HyperX Open-Back Headset, Lightweight Carbon Fiber Mouse and More

Published

on

HP might not be ready to bring any new gaming laptops or desktop computers into the fray just yet, but it debuted a healthy heaping of new peripherals under its HyperX gaming brand to keep casuals, hard-core gamers and streamers happy.

HyperX announced its first open-back headphones and most lightweight mouse, along with a few other goodies that might upgrade your gaming experience. HyperX keeps the focus on gamers, but there are a few pieces of tech here, like the SoloCast 2 Pro mic, that I think will function best in the hands of content creators. There’s a little something for everyone, with products featured at variable prices throughout the lineup.

HyperX Cloud Air Alpha open-back headphones set up inside of a 3D-printed dragon mouth.
These open-back headphones might provide more situational awareness, if you can wrest them from the dragon’s maw.Josh Goldman/CNET

The Cloud Air Alpha is HyperX’s first open-back gaming headset

Any parent struggling to get their kid’s attention while they’re crushing a Fortnite lobby will probably be happy about new open-back headphones because they allow more outside noise to filter. And gamers themselves will be happy that the Cloud Air Alphas don’t sacrifice game audio quality.

I tried out HyperX’s first open-back headphones in a dedicated testing room at a press event in New York, and I’ll attest to the fact that it’s easier to hear people in the real-world than when I was wearing the Cloud 3 headset. My colleagues’ voices still sounded a bit too quiet for my liking, even when I was trying to focus on what they were saying, but my awareness was cranked up: With the Cloud Air Alphas on, I have no doubt that it’s easier for someone to get your attention.

I couldn’t shake the urge to remove one of the headphones when I wanted to engage with the conversation, but maybe that’s something that can only be remedied with time, patience and muscle memory as one grows used to the Cloud Air Alpha headphones.

Advertisement
  • First HyperX headset with open earcup design
  • Integrated bass tube to boost low-end audio
  • USB-C, USB-A, 3.5mm audio jack and USB dongle connectivity
  • HyperX Ngenuity software provides audio customization capabilities
  • Price: $150
  • Release date: September 2026
The HyperX Pulsefire Haste 3 wireless and wired mice sit side by side, dongle included.
The Pulsefire Haste 3 wireless mouse (left) and wired mouse (right) share a very similar form, especially when the dongle is present.Josh Goldman/CNET

A full suite of new mice: The Pulsefire Haste 3 collection

HP will be releasing three new HyperX Pulsefire Haste 3 mice, targeting different subsets of casual, hobbyist and hard-core gamers (with a price to match).

Pulsefire Haste 3 wired mouse

The Pulsefire Haste 3 wired mouse is the entry-level product in the new mouse lineup. It clocks in at 68 grams with its cable, and feels fairly weightless despite always being wired up to your setup. Despite not having the highest sensitivity or mouse acceleration speeds, the wired mouse is able to achieve more than enough precision mouse movement for the average gamer — especially at its low $40 price.

  • 68 grams including non-detachable USB-A cable
  • Up to 16,000 DPI sensitivity, 300 IPS speeds, 35G acceleration
  • Price: $40
  • Release date: September 2026

Pulsefire Haste 3 wireless mouse

The Pulsefire Haste 3 wireless mouse features pretty massive DPI sensitivity, IPS speed and acceleration gains over its wired counterpart, and it’s slightly lighter to boot.

With wireless mice, battery life becomes a variable you need to worry about between gaming sessions. The Pulsefire Haste 3 wireless mouse performs fairly well in that department: It ekes out 150 hours of battery life at 1K polling and 35 hours of battery life at 8K polling (and frankly, the average PC gamer will be just fine operating at 1K polling speeds). 

This is the midrange mouse in HyperX’s new lineup, coming in at a respectable $90 price.

  • Weighs 52 grams without cable and 78 grams with cable
  • Up to 42,000 DPI sensitivity, 800 IPS speeds, 70G acceleration
  • 150 hours of battery life at 1K polling, 35 hours of battery life at 8K polling
  • Optional glass skates to reduce friction
  • Price: $90
  • Release date: September 2026
The Pulsefire Haste 3 Pro mouse sits flat against a white surface.
The Pulsefire Haste 3 Pro is the one mouse in the lineup that looks radically different than its counterparts. Its carbon fiber grip looks good and molded better to my grip.Josh Goldman/CNET

Pulsefire Haste 3 Pro wireless mouse

The carbon fiber Pulsefire Haste 3 Pro is the most lightweight (and most expensive) mouse in the lineup. Its buttons and grip have a rough, nearly grainy texture that creates a solid grip — it certainly feels good to hold, and though I usually prefer weightier mice, I appreciated the way the Haste 3 Pro molded to my hand.

The mouse touts a 150-hour battery life at 1K polling and glass skates to reduce friction — it’s very similar to the regular wireless Pulsefire Haste 3 aside from its physical form. 

Advertisement

At its $130 price, the Pulsefire Haste 3 Pro is a more premium product than most folks will need, but will likely find its niche among hard-core PC gamers.

  • 47-gram carbon fiber shell
  • Up to 42,000 DPI sensitivity, 800 IPS speeds, 70G acceleration
  • 150 hours of battery life at 1K polling, 35 hours of battery life at 8K polling
  • Price: $130
  • Release date: September 2026
The HyperX SoloCast 2 Pro microphone sits tilted upwards on a table.
The SoloCast 2 Pro looks similar to its original counterpart, with a new 3.5mm audio jack. There’s a lot more going on inside the device.Josh Goldman/CNET

The SoloCast 2 Pro desktop mic offers quality-of-life bumps

At a glance, the SoloCast 2 Pro looks strikingly similar to the existing SoloCast 2 desktop microphone: It still has the rubberized bottom that holds firm to your desk, the tap-to-mute button at the top and boom arm connection capabilities. But those with a more astute eye will notice the 3.5mm audio jack on the back and additional RGB light features that indicate when your vocals are peaking and not being picked up by the mic properly.

The big change inside the SoloCast 2 Pro is that it is changing from a single condenser capsule design to a dual condenser setup, which will convert vocals into clearer sound for anyone listening on the other end. All of these features make the Pro 50% more expensive than the original SoloCast 2, though, and I’m not sure the average person will spend an additional $30 on a desktop microphone — this $90 peripheral is almost certainly aimed at streamers and content creators.

  • Two-capsule condenser setup
  • 3.5mm audio jack
  • Built-in pop filter
  • Bottom RGB light communicates peaking audio and mute status
  • Can connect to boom arm
  • Price: $90
  • Release date: September 2026
HyperX Omen 35L gaming desktop computer with AMD processor and a white case sits on a wood-grain desk.
The new configs with AMD processing power are the big deal here, but check out this clean, white case.Josh Goldman/CNET

New silicon options for the Omen 35L gaming desktop

One of HyperX’s high-end gaming PCs is getting a few new configurations. The Omen 35L desktop computers have been tapping into Intel’s processing power for a couple years, with top-of-the-line models toting Core Ultra 9 CPUs. Now you’ll have the option to purchase your Omen 35L gaming desktop with AMD silicon.

The most powerful new models include an Ryzen 9 9950X3D processor, a 16-core, 32-thread desktop processor built on AMD’s Zen 5 architecture. All of the other specs are on par with the Intel versions — the only other new customization option here is a white-colored case. These new configurations will be released throughout fall 2026.

Old HyperX headset models -- the Cloud 3 and Cloud 3 S -- shown off with their new accent colors.
There are new color choices for the Cloud 3 and Cloud 3 S headsets — all of them feature these understated cool-tone magnetic accents.Josh Goldman/CNET

A splash of new color on existing headsets

HyperX’s Cloud Air Alpha is the star of the show, but older headsets like the Cloud 3, Cloud 3 S and Cloud Flight 2 are receiving some cutesy pastel color options to round out the lineup. Many of these color choices add understated pink and blue metallic accents to primarily black and white headphones, but the Cloud Flight 2 is getting a totally lavender model that really pops under direct lighting.

Source link

Continue Reading
Click to comment

You must be logged in to post a comment Login

Leave a Reply

Tech

Best Workout Headphones 2026: Perfect companions for workouts

Published

on

If you’re someone who works out regularly, you’ll need a pair of of the best workout and sports headphones that can hold up to the intensity and duration of your workouts.

We’ve reviewed all types of headphones that could be classified as sports, running or workout headphones, and with this list we’ve tried to review and cover as many different types of pairs as we can. We’re always reviewing new pairs and update this list regularly.

And how do we know which headphones to choose as best workout headphones? We put them through their paces, taking them on runs, using them in the gym and listening to how good they sound. If they’re headphones for swimming, we jump into the pool. If they have ANC we’ll put that to the test in both outdoor and indoor situations, as well as see how durable they are to wear over longer periods of time.

No headphone exists in a void either, so we compare to similarly priced efforts to see how competitive they are in terms of performance.

Advertisement

It’s not only workout and sports headphones that we test. If you’re looking for another pair, have a look at our best headphonesbest wireless headphonesbest wireless earbuds and best noise-cancelling headphones pages.

August 2026 update:

Advertisement

Our best workout headphones have long been due an update, so we’ve refreshed and added several new entries. The Shokz OpenFit Pro serve as our best for open-ear users, the Powerbeats Pro 2 are our best noise-cancelling effort, while if you’re on a budget, our pick is the JLab Go Sport+.

Advertisement

For less than £200 / $200, it’s the Powerbeats Fit, and if you’re looking to save more money, then we’d recommend the JBL Endurance Peak 4.

Best running headphones at a glance

SQUIRREL_ANCHOR_LIST

Learn more about how we test headphones

Not just anybody can review a pair of headphones. You don’t need superhuman hearing to tell what’s good, but you do need to know what to listen out for.

Our headphone tests are done by some of the best and most prolific reviewers in the industry, with years of experience listening to everything from the plasticky freebie earbuds that come with your smartphone, to five-figure beasts of glass and marble. We love music and we want your tunes to sound good, too.

Advertisement

So we listen to every pair of headphones we can get on or in our ears. Our test tracks are wide-ranging to give headphones a thorough challenge. They’re also familiar, so we know every track backwards, and we know which bits might trouble the lesser performers.

We listen again and again, and we do that for weeks in case the sound changes – because it usually does. Then we’ll listen to similarly priced rivals and come up with a verdict that reflects the performance and features for the money.

When it comes to running headphones we’ll take them for a run. If it’s for swimming we’ll do that too, if there’s a heartbeat monitor we’ll put that to good use as well. We’ll test every aspect of the headphone there is so you have all the information you need to make a confident purchase.

Advertisement

Advertisement
  • Wide soundstage, rich audio

  • Comfortable design

  • Long battery life

  • Noise Reduction is effective

  • Strong wireless performance

  • Call quality can suffer in loud areas

  • Little lag with Noise Reduction system

  • Not the most detailed audio

The Shokz OpenFit Pro are the best open-ear headphones Shokz has made so far. Sound quality is good for its type, comfort is strong, battery life is long, and the Noise Reduction mode makes a solid impression.

The OpenFit Pro uses an over-ear hook design, so the drivers sit close to your ears without entering the canal, firing sound directly at them. The hook keeps everything locked during movement, and putting them on is fairly straightforward even if you wear glasses or have long hair. The charging case is on the larger side, slightly bigger than the Beats Powerbeats Pro 2 case, but it’s slimmer and slides into a jacket pocket without too much trouble.

Advertisement

Controls are physical rather than touch-based, which makes them much easier to find and press without guesswork, particularly useful when you’re mid-run and don’t want to fumble around.

Shokz rates the OpenFit Pro at 12 hours on a single charge, dropping to around six with Noise Reduction active. In our testing we landed closer to 10. Factor in the charging case and the total battery stretches to 50 hours.

The Shokz app features battery information, toggling between Open and Noise Reduction modes, adjusting the strength of the latter, and remapping the physical controls.

Noise Reduction here isn’t designed to shut the world out entirely, just to take the edge off constant background sounds, and it does that well even in larger, noisier environments. Call quality is solid too with solid vocal clarity on both ends, and the microphones do a commendable job of isolating your voice despite the open design, though hearing the other person becomes harder in genuinely loud surroundings.

Advertisement

Warmer and richer than the Bose Open Ultra Earbuds, with more bass than you might expect from open-ear headphones which have historically struggled in that area. It is a touch less detailed and clearer than the Bose, but the overall presentation makes it one of the best-sounding open-ear headphones we’ve tested.

  • Delivers enjoyable sound

  • Comfortable and secure fit

  • Solid battery life

Advertisement
  • The touch controls could be better

  • Quite a cheap build

  • Struggles in windier and louder environments

The JLab Go Sport+ are about as close as you’ll get to a genuinely impressive pair of sports earbuds at this low point.

The ear hooks are adjustable and do a solid job of keeping the buds locked in place across sweatier sessions. An IP55 rating means sweat and a light rain shower won’t cause problems, which is a reassuring level of protection for a pair sitting at this end of the market.

Battery life is one of the Go Sport+’s stronger suits. The buds themselves deliver nine hours of playback, while the charging case extends that total to 35 hours. If you do find yourself caught short, ten minutes on charge is enough to recover an hour of playback, which is a useful feature for anyone who forgets to top up before heading out.

Advertisement

The sound is bright and energetic, with a fun character that keeps you moving during a run or a gym session. Open up the JLab app and there’s a custom EQ to fine-tune things to your liking, a safe hearing mode that puts a cap on volume, and a Be Aware mode that pipes in ambient sound to stay conscious of traffic or a training partner.

The build is plastic and there’s no noise cancellation to speak of, but the list of what the Go Sport+ gets right is a long one. For the price, they represent one of the more compelling options on this list for anyone looking for a capable sports earbud without stretching their budget.

Advertisement
  • Inexpensive asking price

  • Secure fit

  • Good comfort

  • Easy to use

  • Audio profile skews towards bass

  • In-line controls not compatible with every device

Good audio quality shouldn’t need to cost the earth, and the Avantree E171 are a testament to that. With a low asking price of just £14.99, they are some of the cheapest wired earbuds you can find and could be the perfect pick for anyone who’s just getting into running and doesn’t want to invest in a premium pair of Adidas RPT-02 SOL or OpenRun Pro right off the bat.

We found them easy to wear and position, with no incidents of them coming loose or falling out during workout sessions. These headphones pack an IPX7 water rating, meaning that they can be submerged in water up to 1m deep for thirty minutes. That type of protection makes them more than serviceable for any workouts in the rain.

Advertisement

These are wired headphones and connect via a 3.5mm headphone jack. The cable comes with an in-line mic/control that allows you to adjust the volume and speak into the microphone. It’s worth noting that these controls are not compatible across the board – with no support for the built-in volume control on PCs and laptops – so you may need to test your devices to ensure that they are supported.

We found these headphones to offer a well-balanced audio experience, although they are clearly tuned towards bass rather than higher frequencies. Kept at a lower volume, the bass was better balanced with a powerful low end in songs like Fleetwood Mac’s The Chain. The soundstage held a lot of presence, however, with natural midranges throughout.

While you can find more premium running headphones on this very list, you won’t find anything as affordable as the Avantree E171. These could be the perfect starting point for runners hoping to indulge their musical side while working out and arguably a steal for under £15.

Advertisement
  • Comfortable design and new colours

  • Bigger music player storage

  • Now includes a fast charge mode

  • Still need to drag and drop files on

  • Doesn’t work with music streaming services

  • Battery life drop in music player mode

The Shokz OpenSwim Pro is one of the stronger swimming headphones, and covers most of the bases you’d want from a pair built for the pool.

Advertisement

The IP68 rating is a solid foundation, letting you submerge these headphones for up to two hours at a stretch. Pair them with your phone over Bluetooth and you can stream audio directly, a connection that held up well during our testing. Switch over to MP3 mode and you can load music files straight onto the headphones themselves.

Storage has jumped considerably from the 4GB found on the OpenSwim, landing at a much more generous 32GB. Shokz has also expanded file-type support, allowing for a wider range of audio formats to loaded onto the headphones.

The Pro sticks with bone conduction, the tuning of the headphones emphasises warm bass and decent clarity depending on the mode. Control is done through physical buttons that handle volume, track skipping and swapping between the two listening modes, which is a sensible call when wet fingers and touch controls rarely get along.

The OpenSwim Pro does cost more than its predecessor. If your budget can stretch to the asking price, you get a well-rounded swimming headphone that covers Bluetooth streaming, generous on-board storage and dependable water protection in one package.

Advertisement
  • Clear, detailed and balanced sound

  • Strong noise-cancellation performance

  • Long battery life

  • Comfortable to wear

  • Not the most exciting audio delivery

  • No customisation of sound or ANC

  • Charging case is still on the big side

  • Expensive

Advertisement

The Beats Powerbeats Pro 2 took their time to arrive after the launch of the original, but the wait was worth it. These buds sound noticeably cleaner and clearer than the old model and, for the first time in the series, pack Active Noise Cancellation, putting them in the same bracket as the Sennheiser Momentum Sport.

A heart-rate sensor works with a range of workout tracking apps, making them a useful fitness companion for tracking your well-being beyond just playing music.

The fit is where the Powerbeats Pro 2 really earn their place on this list. The hook design, combined with four silicone tip sizes in the box, keeps them planted in your ears no matter how intense the session gets. They’re smaller and lighter than the originals, and the case has been trimmed down too. An IPX4 rating means sweat and light rain won’t cause any problems, which is what you’d expect from a pair built with exercise in mind.

There are a couple of things worth knowing before you commit. Beats offers no in-app control over the sound or the noise cancelling, so you’re working with what you get out of the box. Apple users do get a few additional perks on iOS, but the Powerbeats Pro 2 aren’t quite to the same level of features as the AirPods Pro 3.

Advertisement
  • Clear, detailed sound

  • Improved noise-cancellation

  • Smaller design and case

  • Better battery life than Fit Pro

  • Comfortable to wear

  • Lack of any new features

  • Still only IPX4

  • Strong alternatives from Bose and JBL

Advertisement

Beats built the Powerbeats Fit to stay put, and they do exactly that, clinging on through all the stomach crunches you put your body through. That secure fit is only part of the story, as these are among the better Beats buds we have tried in a while.

The design is a touch smaller than the Fit Pro‘s, and Beats includes four tip sizes to help you find the best fit. We got a good seal straight away and found them comfortable throughout testing.

Noise cancelling cuts down ambient hum and background chatter. It does depend on the seal you make with the earbuds and we did feel that the noise-cancellation isn’t the strongest, despite a big improvement over the Fit Pro. Transparency mode is on board too and does a solid job of piping the outside world back in.

Sound is where the biggest boost is compared to the Fit Pro. Everything is clearer, and more detailed. Highs are crisper and bass has proper punch. It is a genuine step up from the older true wireless pair.

Advertisement

The battery holds up well at seven hours per charge and 30 hours total with the case. iPhone users get Automatic Switching and Audio Sharing baked in, while Android users get access through the Beats App, though they do miss out on some of the better features and tweaking options stay fairly thin across the board.

If you want Beats that don’t budget at a more affordable price than the Powerbeats Pro 2, the Powerbeats Fit are the ones to buy. A proper update to the Fit Pro, with better sound and better noise cancelling to match.

Advertisement
  • Secure fit now from a slimmer slimmer design

  • Plenty of sound modes

  • Effective ANC in most scenarios

  • Touch controls still aren’t great

  • Some ANC struggles in windier conditions

  • Charging case a bit on the big side

The JBL Endurance Peak 4 arrives as a meaningful step forward from the already capable Endurance Peak 3, bringing a slimmer, more comfortable design that sits more securely during runs or gym sessions.

JBL has kept its TwistLock system in place, which continues to do a reliable job of keeping the buds locked in place when things get intense. Five colour options and three tip sizes are both welcome additions that help the Endurance Peak 4 feel like a more considered package than its predecessor.

Advertisement

Feature coverage has been expanded too. Adaptive noise cancellation is now on board and performs well in most environments, though it struggles a little when the wind picks up. A dedicated Personi-Fi mode tailors the audio profile to your ears, and call quality has been noticeably improved thanks to a six-mic array. Battery life is a highlight at 12 hours per charge, extending to 36 hours with the case, or 8 hours with ANC running.

The sound sits squarely in JBL’s sporting tradition: bright, bass-forward and energetic enough to keep you motivated on a long run. It falls short of the refinement some rivals offer at a similar level, and the touch controls can be fiddly to operate mid-session.

At £89.99 / $99.95, the Endurance Peak 4 are a strong pick for runners and gym-goers who want a workout earbud that covers most bases without pushing into premium territory.

Advertisement
  • Comes with sweatproof ear cushions

  • Plenty of power with some finesse

  • Bluetooth and analogue modes

  • Not most stylish look

  • Large carry case

  • Doesn’t include IP water rating

We’ll admit that when it comes to finding the right apparatus to help you enjoy your favourite tunes whenever you’re out on a run, on-ear headphones don’t typically make the cut as they can run hot rather quickly. Thankfully, this isn’t the case with the H20 Audio Rpt Ultra, so you can enjoy all the benefits of over-ear headphones but without any of the downsides.

Advertisement

The reason why the Rpt Ultra are so comfortable to wear during workouts is down to the ear cushions not only being sweatproof and breathable, but also removable so that they can be cleaned after workouts to avoid a build up of bacteria. Simply put, they’ve been designed specifically with exercising in mind.

As anyone who’s tried to change the volume mid-run can attest, sweat and touch controls do not mix, which is why the use of physical controls on the Rpt Ultra feels like a great addition. There are tactile buttons on the headphones to help you control playback and volume, as well as the ability to switch between ANC and transparency mode.

Going one step further, it’s also unlikely that you’ll get caught out by a low battery warning with these headphones as the Rpt Ultra can last for up to 50-hours, and that’s with the active noise cancelling switched on. Even flagship headphones like the Sony WH-1000XM6 can’t keep up with that type of longevity, so you’re more than covered if you have a long-distance run in the diary.

All of these features are great but H20 has made sure not to drop the ball where it really counts: sound quality. The 45mm drivers do a great job of separating the various layers of a track, and in our testing we were particularly impressed by the depth they presented, not to mention a thumping bass line which really helps to keep you motivated mid-run.

Advertisement

Full Specs

  Shokz OpenFit Pro Review JLab Go Sport+ Review Avantree E171 Review Shokz OpenSwim Pro Review Beats Powerbeats Pro 2 Review Beats Powerbeats Fit Review JBL Endurance Peak 4 Review H20 Audio Ript Ultra Review
Manufacturer Shokz JLab Avantree Shokz Beats Beats JBL
IP rating IP55 IP55 IPX7 IP68 IPX4 IPX4 IP68 Not Disclosed
Battery Hours 50 35 9 45 30 36 50
Wireless charging Yes Yes
Fast Charging Yes Yes Yes Yes Yes Yes
Size (Dimensions) x x INCHES x x INCHES
Weight 58.1 G 27.3 G 86.4 G 61.3 G 101.5 G
ASIN B0CYNFWD2R B078T9HFDJ B0DT4WR7ZB B0FPGQZTFB B0DRNCBWG5
Release Date 2026 2024 2018 2024 2025 2025 2025 2025
Model Number ADHF-E171-BLK Powerbeats Pro 2
Audio Resolution SBC. AAC SBC, AAC SBC, AAC SBC, AAC SBC, AAC
Driver (s) 11 × 20 mm ultra-large driver 6mm Dynamic Driver Bone conduction transducer Custom-designed, dual-element dynamic diaphragm transducer 10mm dynamic
Noise Cancellation? Yes Yes Yes Yes
Connectivity Bluetooth 6.1 Bluetooth 5.3 Wired Bluetooth 5.4, built-in storage Bluetooth 5.3 Bluetooth 5 Bluetooth 5.4
Colours Black, White Black, Coral, Teal, Yellow, Light blue, Sand, Green Black, White Black, Red Jet Black, Quick Sand, Hyper Purple,, Electric Orange Jet Black, Spark Orange, Gravel Grey, and Power Pin White, Black, Blue, Purple, Black/Grey Black
Frequency Range – Hz 20 20000 – Hz 20 20000 – Hz 20 20000 – Hz – Hz 20 20000 – Hz 20 20000 – Hz – Hz
Headphone Type On-ear (Open) True Wireless In-ear On-ear (Open) True Wireless True Wireless On-ear (Open) Over-ear
Sensitivity 95 dB
Voice Assistant Siri
UK RRP £219 £29.99 £14.99 £169 £249 £89.99 £244
USA RRP $249.95 $29.99 TBC TBC $249 $99.95 $249
EU RRP TBC €299
CA RRP TBC
AUD RRP TBC

Source link

Advertisement
Continue Reading

Tech

Amazon raises Echo, Kindle, Fire TV, and eero prices by up to 60%, blaming the memory crunch

Published

on

What just happened? Amazon is following in the footsteps of virtually every company on earth by increasing the price of its first-party products as a result of the memory crisis. Everything from the Echo smart speaker to the Fire TV line has become more expensive, with some items going up by as much as 60%.

Amazon’s price hikes include an increase in the base Echo Dot from $49.99 to $79.99, Fortune reports. Elsewhere, the Echo Show 11 now costs $249.99, a $30 jump from its previous $219.99 price.

E-reader fans will pay a hefty $40 more for the 16GB Kindle, which is now $149.99, while the 16GB Kindle Paperwhite has increased by the same amount, rising from $159.99 to $199.99.

Amazon’s Fire TV line and routers haven’t been spared, either. The Fire TV Stick HD has risen from $34.99 to $39.99, while the Fire TV Stick 4K Max is up from $59.99 to $84.99. The Fire TV Cube streaming set-top box has gone from $139.99 to $199.99.

Advertisement

The Amazon eero 7 wireless mesh networking system, which has three devices, has increased by $50, from $349.99 to $399.99, but the biggest hike is reserved for the eero Pro 7. Buying this three-pack now costs $100 more, with the price pushed from $699.99 to $799.99.

Product Category Previous price New price Increase Increase (%)
Echo Dot Smart speaker $49.99 $79.99 $30 60%
Echo Show 11 Smart display $219.99 $249.99 $30 13.6%
Kindle (16GB) E-reader $109.99 $149.99 $40 36.4%
Kindle Paperwhite (16GB) E-reader $159.99 $199.99 $40 25%
Fire TV Stick HD Streaming device $34.99 $39.99 $5 14.3%
Fire TV Stick 4K Select Streaming device $40 $50 $10 25%
Fire TV Stick 4K Plus Streaming device $50 $70 $20 40%
Fire TV Stick 4K Max Streaming device $59.99 $84.99 $25 41.7%
Fire TV Cube Streaming device $140 $200 $60 42.9%
eero 7 (three-pack) Mesh Wi-Fi system $349.99 $399.99 $50 14.3%
eero Pro 7 (three-pack) Mesh Wi-Fi system $699.99 $799.99 $100 14.3%

One Amazon segment that hasn’t been affected is its line of Ring products. Whether the home security and smart home devices avoid the hikes permanently remains to be seen.

An Amazon spokesperson confirmed the price increases and the depressingly familiar reason behind them.

The retail giant said that the consumer electronics industry is “facing significant increases in memory and storage component costs. After absorbing these increases for as long as we could, we recently adjusted pricing across our product lines.”

Advertisement

The list of companies passing the burden of the AI-driven memory crunch on to customers keeps growing. Memory and storage suppliers Samsung, Micron, SanDisk, SK Hynix, Western Digital, and Seagate have raised or adjusted prices, while PC makers Dell, Lenovo, HP, Asus, and Acer have confirmed increases of their own.

They have since been joined by MSI, Microsoft’s Surface division, Apple, and Raspberry Pi. Gaming hardware has been hit just as hard, with increases from AMD, Nvidia, Sony, Nintendo, Valve, and Microsoft’s Xbox business. In mobile, Transsion, Oppo, Vivo, Honor, and Xiaomi have been forced to lift retail prices, while Qualcomm has announced a double-digit increase for chips shipping from September.

Source link

Advertisement
Continue Reading

Tech

The ascent of autonomous attacks and the race to contain them

Published

on

Cyber risk is now a board room issue, and we have seen clear examples of this in the UK. The 2025 Jaguar Land Rover attack left the carmaker with a £485m loss, swallowing up the £398m profit it had generated just 12 months before.

Production lines were halted for more than a month as the company shut down parts of its network, showing how quickly a cyber incident can affect business performance, operational continuity and the wider supply chain.

Ian Bowell

Virtual Chief Information Security Officer at Thrive.

Source link

Continue Reading

Tech

5 Of The Most Reliable Car Brands To Consider If You’re Buying A Used Pickup Truck

Published

on





While automakers have been trying to find ways to lower the price of cars, the skyrocketing price of new vehicles continues to be a major issue for buyers. The price of the average new vehicle overall now sits at around $50,000, and if you’re looking for a pickup truck, the numbers are even tougher to swallow. The full-size pickup truck, which regularly tops America’s sales charts, now has an average selling price of nearly $67,000, and some mid-size trucks aren’t too far behind. 

Needless to say, these high prices are pushing a lot of pickup buyers to the used market, whether they’re looking to save a bit of money by choosing a truck that’s just a few years old or save a lot by buying something much older that ideally still has lots of life left in it. That last part is important, because a used truck can still be a significant investment, and nobody wants to be plagued with issues or have to do lots of costly repairs.

Exactly which used truck model you should pick will depend on a lot of things — like whether you’re in the market for a full-size, mid-size, compact, or even electric truck model, for starters —  but if reliability is your goal, there are a few commonly recommended brands to start with.

Advertisement

Ford

If you’re shopping for a new or used pickup truck, Ford might have more options than any other brand. It makes a pickup for every type of buyer, from the compact and fuel-efficient Ford Maverick to the best-selling F-150 to the beefy Super Duty line. There’s even the all-electric Ford F-150 Lightning.

Advertisement

When it comes to the used pickup market, the mid-sized Ford Ranger is ranked highly by Car & Driver, as is the Ford Maverick, which tops the compact class (where it admittedly doesn’t have many direct rivals). U.S. News & World Report also ranks the 2020 model-year Ranger as the most reliable used pickup truck, while giving high marks to the Maverick as well. Looking at the larger Super Duty Trucks, the Ford F-450 is ranked by iSeeCars as the third longest-lasting truck on the market, with a 28.5% chance of lasting over 250,000 miles, with other Super Duty models ranked closely behind.

However, you’ll probably also want to consider depreciation in your purchase decision. Before you settle on a used Maverick, Ranger, or another Ford truck model, remember that many of these trucks are known for having excellent resale value, and might not offer the large up-front savings you were expecting. You might save a few bucks, but you’ll also want to make sure you aren’t overpaying for a used truck compared to what you can buy a new one for. 

Advertisement

Toyota

Toyota’s inclusion in this group should come as no surprise. The brand’s got a reputation for building reliable vehicles, and when it comes to its trucks, the data largely backs that up. On the iSeeCars rankings of longest-lasting pickups, both the mid-size Toyota Tacoma and full-size Toyota Tundra are in the top five, with both models twice as likely to make it to 250,000 miles compared to the average truck.

Used Toyota trucks get high marks elsewhere too, with the 2022 Tacoma earning JD Power’s Dependability Award in the mid-size pickup segment, and the 2020 model year Tundra getting an Editor’s Choice Award in U.S. News & World Report’s ranking of the most reliable used pickup trucks. Notably, though, if you’re looking for a used Tundra with high reliability, you may want to avoid the 2022 and newer models, which have been plagued with ongoing, and at times significant, engine issues. 

Not surprisingly, that reputation for reliability coincides with high Toyota truck prices on the used market, and that might draw you toward examples with more miles on them. While having high mileage certainly isn’t a dealbreaker on a used Tacoma or Tundra, there are definitely some important things to consider before buying a high-mileage Toyota.

Advertisement

Ram

While Stellantis vehicles have suffered from fairly significant quality issues recently, used Ram trucks generally perform pretty well when it comes to reliability. In the ultra-popular half-ton truck segment, Car & Driver ranks the Ram 1500 as its top pick among used models, with the 2022, 2023, and 2024 models all earning high marks.

U.S. News & World Report placed the 2023 model year Ram 1500 at number five on its list of most reliable used pickups, and the newer model Ram 1500, which we greatly enjoyed driving, has also scored very well in JD Power’s Vehicle Dependability Study. The hope is, of course, that the Ram’s record of initial dependability will continue as the trucks age.

Advertisement

The heavier-duty Ram 2500 and Ram 3500 might perform even better when it comes to long-term reliability, with both of those models ranking in the top 10 of trucks most likely to last 250,000 miles. While high resale value on a vehicle isn’t always directly proportional to having excellent reliability, it’s generally a good sign, and iSeeCars ranks the Ram 1500 second in resale among full-size trucks, while the larger Ram 3500 does even better, beating out all other trucks in the heavy-duty pickup category.

Advertisement

Honda

Honda might not be heavily associated with the pickup market, as it only makes one truck model. However, the current, second-generation unibody Honda Ridgeline has been around since the 2016 model year, and it has earned high marks for reliability. Long-term road tests have shown the Ridgeline to be without major issues, and the truck is also rated above the class average in its likelihood of reaching the 250,000 mark.

When looking at reliability scores, the Ridgeline gets high marks from JD Power, and notably, even though it’s starting to show its age in some ways, the Honda was chosen by Consumer Reports as the top pick in the mid-size truck category. Indeed, despite being a unibody pickup rather than a more rugged body-on-frame model, the Ridgeline’s reliability has always been among the best in the mid-size segment. 

The Honda Ridgeline occupies a unique place in the truck market, and if your needs include towing heavy trailers, carrying huge payloads, or venturing far off the beaten path, the more car-like Honda might not be a good fit. However, if the Ridgeline’s capabilities sound good to you, it should make for a reliable, versatile, and easy-to-live-with pickup for the everyday grind.

Advertisement

Chevy and GMC

While Chevrolet and GMC are two separate brands, we’ve listed them together because their trucks are nearly identical mechanically and should deliver the same overall record of reliability. These GM offerings range from the mid-size Chevy Colorado and GMC Canyon up to the heavy-duty Chevy Silverado and GMC Sierra pickup models. 

JD Power gave awards to both the 2022 Chevy Silverado 1500 and 2022 Silverado 2500 in its most recent dependability rankings , and JD Power’s reliability scores for the Silverado’s GMC twins are equally strong. Likewise, the 2022 Silverado 1500 and 2020 GMC Sierra 1500 are both ranked among the top 10 most reliable used pickups by U.S. News & World Report. 

When it comes to long-term, high-mileage reliability, GM’s heavy-duty pickups do especially well. The 2500 and 3500 variants of both the Chevy Silverado HD and GMC Sierra HD are all ranked by iSeeCars among the trucks most likely to last beyond 250,000 miles. Also not to be left out are the smaller, cheaper Chevy Colorado and GMC Canyon pickups, which also earn high reliability scores tp help make them solid recommendations on the used truck market.

Advertisement

Methodology

The brands on this list were chosen based on reliability scores, data, and used-vehicle recommendations from a variety of sources, including iSeeCars, JD Power, Consumer Reports, Car & Driver, and U.S. News & World Report. In some cases, like with the Honda Ridgeline, current model-year reliability and quality ratings were considered, as that vehicle has carried over for several years without major mechanical changes.

Advertisement



Source link

Advertisement
Continue Reading

Tech

Canonical backs quest to translate mountains of C into safe Rust with AI

Published

on

SOFTWARE

Bungs banknotes at Bristol boffins to find out if mature code survives the machine

Canonical’s fondness for AI and Rust is no secret. Now it is co-funding a three-year PhD project investigating whether the former can translate large C codebases into the latter.

Engineering veep Jon Seager announced the investment on Ubuntu’s Discourse forum. The PhD project will be conducted at the University of Bristol’s Programming Languages Research Group.

Advertisement

So don’t panic. This is not an announcement that Canonical will turn the bots loose to rewrite all of Ubuntu as Rusty slop. (For a start, nobody can afford that many tokens.) Instead of burning dosh on bots, Canonical will pay a proto-boffin to spend several years investigating whether the idea can be made to work. That is welcome. In an industry overflowing with hype, the project should produce evidence about whether this approach can be useful.

The Reg FOSS desk interviewed Seager last year, and he struck us as sensible and pragmatic, but not lacking in boldness. Under his guidance, Ubuntu 25.10 adopted a Rust implementation of sudo as well as the entirely separate Rust-based uutils coreutils. The sudo command did hit some problems but they were quickly fixed.

Both uutils and sudo-rs were pre-existing independent projects, however. They are human-written replacements designed to reproduce the functionality of existing tools using entirely new codebases. Certainly, those human developers may have studied the original source code – that’s one of the good things about FOSS, after all – but these are new implementations.

The new project will investigate whether an LLM can take programs “comprising hundreds of thousands of lines of C” and decompose them into smaller components before using an LLM to rewrite those components in “safe, behaviourally correct and maintainable Rust.”

Advertisement

Seager’s post runs to just over 1,000 words and addresses several objections that sprang to mind. For instance, existing tools attempt something similar, but their results leave much to be desired.

As Seager puts it: “Traditional source-to-source translators can process substantial amounts of code, but often preserve the structure of the C too literally. The result may compile as Rust, but still rely heavily on unsafe operations, retain awkward C idioms and require significant manual work before it resembles code a Rust maintainer would choose to own.”

We suggest reading the post before attacking the idea. It sets out a relatively detailed and measured plan. One admirable aspect is its acknowledgment that mature codebases contain knowledge their programmers never consciously documented. Years of fixes and patches encode responses to real-world corner cases that nobody anticipated at the outset. This is the key argument of Joel Spolsky’s 2000 essay: Things You Should Never Do, Part I. Such knowledge is rarely documented outside the code itself or, if you’re lucky, a few comments. A machine translation might preserve some of that behavior, while a clean human rewrite based on the original design could miss it.

The proposal names two specific tools that the effort intends to examine: snap-confine and AppArmor We may be excessively cynical, but openSUSE 16 replaced AppArmor with SELinux last year. Outside the Ubuntu family, enterprise Linux has largely consolidated around the more complex SELinux, although Debian and several smaller distributions continue to support AppArmor. A hardened Rust implementation could therefore benefit AppArmor’s remaining users. Snap, of course, has a narrower constituency still.

Advertisement

This is not a solo Canonical project. The company is co-sponsoring it with UK Research and Innovation, a public body sponsored by the UK’s Department for Business, Innovation, Science and Trade. Seager will oversee the project alongside the University of Bristol’s Professor Meng Wang and Dr Cristina David.

Three years is a conventional duration for a UK PhD – provided it does not overrun, of course. It’s not as if someone could go into a PhD program in 1998 and then get two decades’ worth of comic strips out of it or something.

The Reg FOSS desk remains staunchly skeptical of generative AI outside the narrow domain of translation between human languages. As such, we have grave doubts that this will prove viable. We suspect the difficult part will not be translating the code, but decomposing a large codebase into smaller components that bots can digest. The challenge recalls the long-running effort to divide arbitrary algorithms automatically into tasks that can be farmed out to parallel processes. Decades of research have produced useful techniques for particular cases, but no general solution. It may yet prove to be an incomputable problem, like the Halting Problem – and as that article says, if it could be solved, it would lead to solutions to the Busy Beaver function or even Goldbach’s conjecture.

As with much of generative AI, more evidence is needed, and producing it is exactly what a PhD research project should do. We salute Canonical for putting real money behind the question and would be delighted to have our skepticism proved wrong. As we speculated in 2024, automatic translation between programming languages could become immensely valuable for improving software reliability – not by fixing problems automatically, but by exposing previously unknown errors. ®

Advertisement

Source link

Continue Reading

Tech

Auto Enthusiast Recreates the Mazda Suitcase Car from the 90s

Published

on

DIY Mazda Suitcase Car
In 1991, seven Mazda transmission research engineers combined a hard-shell Samsonite and a pocket bike to create something no airline would ever allow. Their submission for the company’s Fantasyard contest was a three-wheeled motorcycle that folded into luggage, weighed seventy-one pounds, and could reach speeds of nearly nineteen miles per hour with a 33.6-cubic-centimeter two-stroke engine. Assembly takes approximately one minute. The thing was highlighted on Oprah and at major auto shows, but just one original remains today.



Years later, the team behind the YouTube channel Bucket decided it was time to take on the challenge. They began gathering information about the prototype, tracking down its caretaker to get the lowdown on measurements and mechanics. Contact was eventually made, and with the owner’s OK, the crew took the necessary measurements and hit the ground running to try to build a working replica. They’ve collaborated with ArcCaptain to arrange welding equipment and make metalwork possible.

DIY Mazda Suitcase Car
They started with a heavy-duty Samsonite Rexton hard case, which gave them a little more room to work with than the original. They then ground down the inside frame so that the aluminum tubing would fit snugly against it. Some of the rear chassis components were made from square tube and flat stock, which they put together with a TIG welder (although they were still learning how to weld aluminum with that machine) – holes for the axle bearings also had to be punched out precisely. The engine mounting plate came out incorrectly the first time, failing to line up properly with the small two-stroke engine. Luckily, a second plate constructed of thicker quarter-inch aluminum solved the problem.

DIY Mazda Suitcase Car
When it came to driving, they welded a sprocket from a Razor E300 to the axle using a MIG machine. The front end components came from a Razor scooter (can’t remember which one), and the fork and wheel need a stronger mount after the initial batch of quick-release hardware became too soft, so they replaced them with solid aluminum blocks and captive nuts instead. To allow the thing to turn without binding, they welded pillow-block bearings together around the axle, allowing the one rear wheel to freewheel. This one-wheel-drive system avoided the tight-radius problem, which would have rendered a solid axle useless.

DIY Mazda Suitcase Car
Some slots were carved into the suitcase shell with a Dremel to let the front & rear frames slide together on pins, while threaded knobs secure the two parts firm once the pins are home. The plywood seat base received some foam and batting to increase weight, and the upholstery came from an old rice bag (they were striving for a retro look), since the foot pegs were created using a 3D printer and they were able to slip the seat into place fast. Throttle cable, exhaust, chain guard, and a small fuel tank completed the mechanical side of things.

DIY Mazda Suitcase Car
The finished weight was 56.8 pounds, which is lighter than the original Mazda. On a quiet stretch of road, it reached 33 km/h, somewhat faster than the 1991 version. The setup is quite straightforward: unlock the latches, remove the stored wheels, drop the seat onto the pegs, slide the frame pins home, lock the handlebars, and attach the rear wheels. Overall, it takes minutes rather than hours.

DIY Mazda Suitcase Car
This closed-up case can easily fit into the trunk of a regular automobile, ensuring portability. It barely makes the standard airline weight limit, so you might get strange looks if you try to sneak it aboard. Carrying 70 pounds of metal and plastic through an airport will still feel like a chore, but this contraption does exactly what Mazda engineers imagined 35 years ago: it opens up like a typical suitcase and changes into a little, noisy, three-wheeled vehicle that travels on its own.

DIY Mazda Suitcase Car
Bucket’s version includes a few upgrades that the original didn’t require. The custom freewheeling axle, reinforced front mounting, and aluminum structure were all developed through real-world testing rather than from a textbook. The finished product is a rather nice replica that nevertheless feels homemade, complete with tiny defects indicating that the person who created this thing was learning to weld in a hurry and still managed to get it to move.

Source link

Advertisement
Continue Reading

Tech

What airports can teach us about the power of invisible business AI

Published

on

A seamless airport journey can feel effortless. From check-in to baggage handling and take-off, everything appears coordinated, predictable and, for the most part, smooth. When delivered without any hitches, the entire process feels remarkably simple.

But, beneath that simplicity sits one of the most complex operational environments imaginable. Airlines, baggage handlers, security teams, retailers, air traffic control and countless other stakeholders must all coordinate in real time to keep passengers and aircraft on the way to their next destination.

Source link

Continue Reading

Tech

Rhino’s John Coltrane 100 6LP Box Set Spans Five Labels. Is It Worth $150?

Published

on

John Coltrane would have turned 100 on September 23, 2026, and the jazz reissue industry was never going to let that milestone pass quietly. That is hardly a complaint. We have spent a fair amount of 2026 listening to Coltrane again at eCoustics, including Craft Recordings’ excellent new Original Jazz Classics edition of his 1957 Coltrane debut.

We also recently reviewed the all-analog mono reissue of A Love Supreme, another reminder that the strongest parts of Coltrane’s catalog continue to reward both new listeners and those of us who have bought some of these records more than once.

Rhino is taking a different approach with John Coltrane 100: Selections From 1951-1967, a six-LP retrospective arriving October 2 for $149.99. Rather than concentrating on one album or one label period, Rhino has licensed recordings from Prestige, Blue Note, Atlantic, Columbia, and Impulse! to follow Coltrane from his early work as a sideman through the increasingly adventurous music of his final years. That makes this far more useful than another greatest-hits collection.

Five Labels, One Very Short Career

One of the difficulties with building a Coltrane collection is that his recorded history is scattered across multiple catalogs. The early years intersect with Dizzy Gillespie, Miles Davis, Thelonious Monk, Paul Chambers, and Art Blakey before Coltrane’s recordings as a leader begin to dominate the story. From there, the collection moves through Blue TrainGiant StepsMy Favorite Things, the Impulse! period, collaborations with Duke Ellington and Johnny Hartman, live recordings, A Love Supreme, and finally material from Stellar Regions.

Advertisement

Rhino has sequenced the box chronologically, which is important because Coltrane’s musical evolution happened at a pace that still feels almost ridiculous. The first LP includes early recordings such as the Dizzy Gillespie Sextet’s “We Love To Boogie,” an alternate take of “Two Bass Hit” with the Miles Davis Quintet, Paul Chambers’ “John Paul Jones,” and Miles’ “If I Were A Bell.” By the second record, “Blue Train” has arrived. The middle of the collection moves through “Giant Steps,” “Naima,” “My Favorite Things,” “Equinox,” and a live version of “India,” before the final side reaches “My One And Only Love,” a live “Alabama,” “A Love Supreme, Pt. 1 – Acknowledgement,” and “Stellar Regions.”

The value here is not merely having those tracks in one box. It is hearing the changes in Coltrane’s playing, compositions, ensembles, and priorities unfold in sequence, something that is much harder to appreciate when the albums are purchased piecemeal and listened to without much historical context.

john-coltrane-100-1951-1967

There Are 37 Selections, Not 23

There is one odd discrepancy in Rhino’s own announcement. The company describes Coltrane 100 as having a 23-song track list, but the published six-LP sequence contains 37 selections across 12 sides. We counted them, and the published side timings add up to approximately 239 minutes, or just under four hours of music.

For anyone trying to determine exactly how much material is included, 37 selections is the number that actually matches Rhino’s own track listing. It is a strange error in the promotional copy, especially for a box built around a centennial celebration where collectors are going to look rather closely at what they are getting.

Technical Details

The six records are being pressed on 180-gram vinyl at Optimal Media in Germany, with mastering handled by Bernie Grundman. The set is packaged in a slipcase and includes a 12-page booklet featuring a new essay by Coltrane scholar Ben Ratliff. Rhino also says copies purchased through Rhino.com and participating independent retailers may include a limited 12 x 12 typography poster.

Advertisement

Those are all encouraging details, but there are still some important unanswered questions for audiophile buyers. Rhino does not describe the box as AAA, does not identify the source used for every selection, does not state whether the lacquers were cut directly from analog tape or from digital files, and does not specify the mono/stereo configuration of every track.

None of that means the records were poorly sourced or will not sound excellent. Bernie Grundman’s involvement carries considerable weight, but “remastered by Bernie Grundman” is not the same thing as documenting the entire mastering chain.

Advertisement. Scroll to continue reading.

That matters because Rhino has been much more explicit when it wants to promote an all-analog release. Its John Coltrane: 1960-1964 Mono Rhino High Fidelity six-LP box was advertised as AAA, cut by Kevin Gray from the original mono master tapes, and pressed at Optimal.

Advertisement

Craft has been equally clear with its new OJC edition of Coltrane, while Blue Note specifies the analog mastering chain for its Tone Poet edition of Blue Train. Until Rhino provides more information, Coltrane 100 should not be described as an all-analog release.

Is $150 a Good Deal?

For six 180-gram records, the price works out to almost exactly $25 per LP, which is hardly outrageous in 2026, particularly for a box involving five different label catalogs, Bernie Grundman mastering, Optimal pressings, and nearly four hours of music. The more useful comparison is what happens if you start buying major Coltrane albums individually.

Current audiophile-oriented editions of ColtraneBlue TrainGiant StepsMy Favorite Things, and A Love Supreme generally sell for around $39 each. Buying those five alone pushes the total close to $200, and you would still be missing the Miles Davis, Thelonious Monk, Dizzy Gillespie, Duke Ellington, Johnny Hartman, live Village Vanguard, and later Impulse! material represented here.

The comparison is not entirely one-sided, however. Those standalone purchases give you five complete albums, often with more elaborate jackets and, in several cases, clearly documented all-analog mastering. Coltrane 100 gives you selected performances from a much broader section of his career, and there are no previously unreleased recordings being promoted as part of the package. For anyone who already owns a substantial Coltrane collection, the question becomes less about price and more about duplication.

Advertisement

Who Is This For?

For someone beginning a serious Coltrane vinyl collection, the six-LP set makes a lot of sense because it provides almost four hours of music while connecting periods of his career that normally sit in different record bins and under different label logos. The chronological sequence also gives the listener context, which matters with Coltrane because the distance between his early sideman work and the final Impulse! recordings is enormous despite the relatively short span of time involved.

There is also a cheaper route. Rhino is releasing a two-LP Highlights From 1957-1964 edition for $34.98, featuring 11 selections including “Straight Street,” “Blue Train,” “Milestones,” “So What,” “Giant Steps,” “Naima,” “My Favorite Things,” “Equinox,” and “Acknowledgement.” A CD edition will sell for $14.98, which may be the smarter choice for listeners who want a well-selected introduction without committing to the full box.

Established collectors have a different calculation to make. If mastering provenance and owning complete albums are the priorities, I would still build the collection around the best OJC, Tone Poet, Acoustic Sounds Series, and Rhino High Fidelity releases. We have reviewed enough of those recently to know how good they can be, and the better individual editions offer a level of technical transparency that Rhino has not yet provided for this set.

john-coltrane-100-6lp-box-set

The Bottom Line

Rhino’s John Coltrane 100 succeeds because it approaches Coltrane as a career rather than a collection of famous songs. Bringing Prestige, Blue Note, Atlantic, Columbia, and Impulse! material together creates a coherent path from the early sideman sessions through one of the most important artistic transformations in jazz history, and at $149.99 the six-LP set is priced fairly for what it includes.

Advertisement

Newer Coltrane listeners may find it more useful than buying five or six famous albums first and trying to connect the historical dots afterward. Longtime collectors should study the track list more carefully, because if Blue TrainGiant StepsMy Favorite ThingsA Love Supreme, and the Prestige sessions are already sitting on your shelves in high-quality editions, much of the music will be familiar.

Where to buy: $149.99 at Amazon | Rhino Store

Source link

Advertisement
Continue Reading

Tech

Claude outage hits multiple models again

Published

on

Anthropic’s Claude AI is showing signs of overload again.

On Monday morning, users trying to work with Claude encountered failed requests and a “529 Overloaded” error. The message says the problem is a temporary server-side issue, then sends users to Anthropic’s status page. A screenshot shared with TNW shows the error appearing in the Claude interface.

Anthropic’s own incident report is broader, and more cautious. At 05:06 UTC on 24 August, the company said it was investigating elevated errors affecting requests to Claude Mythos 5, Claude Fable 5, Claude Opus 5, and Claude Opus 4.8. The incident also affects claude.ai, the Claude API, Claude Code, and Claude Cowork.

At 05:27 UTC, Anthropic said it had identified the cause and was working on a fix. Its latest update, posted at 06:42 UTC, says the company is still working to resolve the issue. The status page does not yet provide a recovery time or a technical explanation.

Advertisement

The distinction matters. “529 Overloaded” describes what at least some users are seeing, but Anthropic has not said that overload is the root cause of the wider incident. For now, the public record establishes elevated errors across several models and products, not why they occurred.

Claude’s busy August

This is not the first Claude service problem this month. Anthropic’s status history includes a degraded-performance incident affecting multiple models on 18 August, followed by another incident involving Opus 5 and Haiku 4.5 on 19 August. A separate disruption affecting multiple models was reported on 20 August.

Independent coverage has also documented the latest interruption. Frandroid reported that some users could not access Anthropic’s models and that the company had identified the problem. Online discussions on Hacker News and other forums show users posting the same 529 error while trying to use Claude.

Those reports do not establish the scale of the outage. They do show how quickly an infrastructure issue becomes visible: in a broken chat request, a failed coding session, or an API call that needs to be retried.

Advertisement

The cost of shared infrastructure

Claude is no longer one product. It is a family of models exposed through consumer chat, developer tools, an API, and Cowork. When several surfaces fail together, users do not experience separate incidents. They experience one unavailable dependency.

That is the more important story here. Anthropic has identified the cause, but it has not yet explained whether the problem sits in a shared service, model routing, capacity, or another part of the stack. Any of those explanations would be speculation at this stage.

The fix is still being monitored. Until Anthropic publishes more detail, the question is not simply when Claude comes back. It is whether users can build on it without treating failure as part of the interface.

For developers, that distinction may matter later. During the outage, the practical question is simpler: whether to wait, retry, switch providers, or close the laptop and play with the cat.

Advertisement

Source link

Continue Reading

Tech

If one PC creates 20dB of noise and another makes 40dB, how louder is the second PC?

Published

on

Also: what are humming, rattling and whining PC noises?

Read Entire Article
Source link

Continue Reading

Trending

Copyright © 2025